CurvatureConfidence
This is a ROS message definition.
Source
# ==============================================================================
# MIT License
#
# Copyright (c) 2023-2024 Institute for Automotive Engineering (ika), RWTH Aachen University
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in all
# copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# ==============================================================================
# --- Auto-generated by https://github.com/ika-rwth-aachen/etsi_its_messages ---
# python3
# utils/codegen/codegen-py/asn1ToRosMsg.py
# asn1/raw/cam_ts103900/CAM-PDU-Descriptions.asn
# asn1/patched/cam_ts103900/cdd/ETSI-ITS-CDD.asn
# -t
# cam_ts
# -o
# etsi_its_msgs/etsi_its_cam_ts_msgs/msg
# ------------------------------------------------------------------------------
# --- ASN.1 Definition ---------------------------------------------------------
# /**
# * This DE indicates the acceleration confidence value which represents the estimated absolute accuracy range of a curvature value with a confidence level of 95 %.
# * If required, the confidence level can be defined by the corresponding standards applying this DE.
# *
# * The value shall be set to:
# * - 0 - `onePerMeter-0-00002` - if the confidence value is less than or equal to 0,00002 m-1,
# * - 1 - `onePerMeter-0-0001` - if the confidence value is less than or equal to 0,0001 m-1 and greater than 0,00002 m-1,
# * - 2 - `onePerMeter-0-0005` - if the confidence value is less than or equal to 0,0005 m-1 and greater than 0,0001 m-1,
# * - 3 - `onePerMeter-0-002` - if the confidence value is less than or equal to 0,002 m-1 and greater than 0,0005 m-1,
# * - 4 - `nePerMeter-0-01` - if the confidence value is less than or equal to 0,01 m-1 and greater than 0,002 m-1,
# * - 5 - `nePerMeter-0-1` - if the confidence value is less than or equal to 0,1 m-1 and greater than 0,01 m-1,
# * - 6 - `outOfRange` - if the confidence value is out of range, i.e. greater than 0,1 m-1,
# * - 7 - `unavailable` - if the confidence value is not available.
# *
# * @note: The fact that a curvature value is received with confidence value set to `unavailable(7)` can be caused by
# * several reasons, such as:
# * - the sensor cannot deliver the accuracy at the defined confidence level because it is a low-end sensor,
# * - the sensor cannot calculate the accuracy due to lack of variables, or
# * - there has been a vehicle bus (e.g. CAN bus) error.
# * In all 3 cases above, the curvature value may be valid and used by the application.
# *
# * @note: If a curvature value is received and its confidence value is set to `outOfRange(6)`, it means that the curvature value is not valid
# * and therefore cannot be trusted. Such value is not useful for the application.
# *
# * @category: Vehicle information
# * @revision: Description revised in V2.1.1
# */
# CurvatureConfidence ::= ENUMERATED {
# onePerMeter-0-00002 (0),
# onePerMeter-0-0001 (1),
# onePerMeter-0-0005 (2),
# onePerMeter-0-002 (3),
# onePerMeter-0-01 (4),
# onePerMeter-0-1 (5),
# outOfRange (6),
# unavailable (7)
# }
# ------------------------------------------------------------------------------
uint8 value
uint8 ONE_PER_METER_0_00002 = 0
uint8 ONE_PER_METER_0_0001 = 1
uint8 ONE_PER_METER_0_0005 = 2
uint8 ONE_PER_METER_0_002 = 3
uint8 ONE_PER_METER_0_01 = 4
uint8 ONE_PER_METER_0_1 = 5
uint8 OUT_OF_RANGE = 6
uint8 UNAVAILABLE = 7