Function rs2_run_on_chip_calibration_cpp

Function Documentation

const rs2_raw_data_buffer *rs2_run_on_chip_calibration_cpp(rs2_device *device, const void *json_content, int content_size, float *health, rs2_update_progress_callback *progress_callback, int timeout_ms, rs2_error **error)

This will improve the depth noise.

Parameters:

  • json_content – [in] Json string to configure regular speed on chip calibration parameters: { “calib type” : 0, “speed”: 3, “scan parameter”: 0, “adjust both sides”: 0, “white wall mode”: 0, “host assistance”: 0 } calib_type - calibraton type: 0 = regular, 1 = focal length, 2 = both regular and focal length in order, speed - for regular calibration. value can be one of: Very fast = 0, Fast = 1, Medium = 2, Slow = 3, White wall = 4, default is Slow for type 0 and Fast for type 2 scan_parameter - for regular calibration. value can be one of: Py scan (default) = 0, Rx scan = 1 adjust_both_sides - for focal length calibration. value can be one of: 0 = adjust right only, 1 = adjust both sides host_assistance: 0 for no assistance, 1 for starting with assistance, 2 for first part feeding host data to firmware, 3 for second part of feeding host data to firmware (calib_type 2 only) white_wall_mode - white wall mode: 0 for normal mode and 1 for white wall mode if json is nullptr it will be ignored and calibration will use the default parameters

  • health – [out] The absolute value of regular calibration Health-Check captures how far camera calibration is from the optimal one [0, 0.25) - Good [0.25, 0.75) - Can be Improved [0.75, ) - Requires Calibration The absolute value of focal length calibration Health-Check captures how far camera calibration is from the optimal one [0, 0.15) - Good [0.15, 0.75) - Can be Improved [0.75, ) - Requires Calibration The two health numbers are encoded in one integer as follows for calib_type 2: Regular health number times 1000 are bits 0 to 11 Regular health number is negative if bit 24 is 1 Focal length health number times 1000 are bits 12 to 23 Focal length health number is negative if bit 25 is 1

  • callback – [in] Optional callback to get progress notifications

  • timeout_ms – [in] Timeout in ms (use 5000 msec unless instructed otherwise)

Returns:

New calibration table