testProjectionFactor.cpp

Go to the documentation of this file.

/* ----------------------------------------------------------------------------
 
 * GTSAM Copyright 2010, Georgia Tech Research Corporation,
 * Atlanta, Georgia 30332-0415
 * All Rights Reserved
 * Authors: Frank Dellaert, et al. (see THANKS for the full author list)
 
 * See LICENSE for the license information
 
 * -------------------------------------------------------------------------- */
 
#include <gtsam/slam/ProjectionFactor.h>
#include <gtsam/inference/Symbol.h>
#include <gtsam/geometry/Cal3DS2.h>
#include <gtsam/geometry/Cal3_S2.h>
#include <gtsam/geometry/Pose3.h>
#include <gtsam/geometry/Point3.h>
#include <gtsam/geometry/Point2.h>
#include <gtsam/base/TestableAssertions.h>
#include <CppUnitLite/TestHarness.h>
 
using namespace std;
using namespace gtsam;
 
// make a realistic calibration matrix
static double fov = 60; // degrees
static size_t w=640,h=480;
static Cal3_S2::shared_ptr K(new Cal3_S2(fov,w,h));
 
// Create a noise model for the pixel error
static SharedNoiseModel model(noiseModel::Unit::Create(2));
 
// Convenience for named keys
using symbol_shorthand::X;
using symbol_shorthand::L;
 
typedef GenericProjectionFactor<Pose3, Point3> TestProjectionFactor;
 
/* ************************************************************************* */
TEST( ProjectionFactor, nonStandard ) {
  GenericProjectionFactor<Pose3, Point3, Cal3DS2> f;
}
 
/* ************************************************************************* */
TEST( ProjectionFactor, Constructor) {
  Key poseKey(X(1));
  Key pointKey(L(1));
 
  Point2 measurement(323.0, 240.0);
 
  TestProjectionFactor factor(measurement, model, poseKey, pointKey, K);
}
 
/* ************************************************************************* */
TEST( ProjectionFactor, ConstructorWithTransform) {
  Key poseKey(X(1));
  Key pointKey(L(1));
 
  Point2 measurement(323.0, 240.0);
  Pose3 body_P_sensor(Rot3::RzRyRx(-M_PI_2, 0.0, -M_PI_2), Point3(0.25, -0.10, 1.0));
 
  TestProjectionFactor factor(measurement, model, poseKey, pointKey, K, body_P_sensor);
}
 
/* ************************************************************************* */
TEST( ProjectionFactor, Equals ) {
  // Create two identical factors and make sure they're equal
  Point2 measurement(323.0, 240.0);
 
  TestProjectionFactor factor1(measurement, model, X(1), L(1), K);
  TestProjectionFactor factor2(measurement, model, X(1), L(1), K);
 
  CHECK(assert_equal(factor1, factor2));
}
 
/* ************************************************************************* */
TEST( ProjectionFactor, EqualsWithTransform ) {
  // Create two identical factors and make sure they're equal
  Point2 measurement(323.0, 240.0);
  Pose3 body_P_sensor(Rot3::RzRyRx(-M_PI_2, 0.0, -M_PI_2), Point3(0.25, -0.10, 1.0));
 
  TestProjectionFactor factor1(measurement, model, X(1), L(1), K, body_P_sensor);
  TestProjectionFactor factor2(measurement, model, X(1), L(1), K, body_P_sensor);
 
  CHECK(assert_equal(factor1, factor2));
}
 
/* ************************************************************************* */
TEST( ProjectionFactor, Error ) {
  // Create the factor with a measurement that is 3 pixels off in x
  Key poseKey(X(1));
  Key pointKey(L(1));
  Point2 measurement(323.0, 240.0);
  TestProjectionFactor factor(measurement, model, poseKey, pointKey, K);
 
  // Set the linearization point
  Pose3 pose(Rot3(), Point3(0,0,-6));
  Point3 point(0.0, 0.0, 0.0);
 
  // Use the factor to calculate the error
  Vector actualError(factor.evaluateError(pose, point));
 
  // The expected error is (-3.0, 0.0) pixels / UnitCovariance
  Vector expectedError = Vector2(-3.0, 0.0);
 
  // Verify we get the expected error
  CHECK(assert_equal(expectedError, actualError, 1e-9));
}
 
/* ************************************************************************* */
TEST( ProjectionFactor, ErrorWithTransform ) {
  // Create the factor with a measurement that is 3 pixels off in x
  Key poseKey(X(1));
  Key pointKey(L(1));
  Point2 measurement(323.0, 240.0);
  Pose3 body_P_sensor(Rot3::RzRyRx(-M_PI_2, 0.0, -M_PI_2), Point3(0.25, -0.10, 1.0));
  TestProjectionFactor factor(measurement, model, poseKey, pointKey, K, body_P_sensor);
 
  // Set the linearization point. The vehicle pose has been selected to put the camera at (-6, 0, 0)
  Pose3 pose(Rot3(), Point3(-6.25, 0.10 , -1.0));
  Point3 point(0.0, 0.0, 0.0);
 
  // Use the factor to calculate the error
  Vector actualError(factor.evaluateError(pose, point));
 
  // The expected error is (-3.0, 0.0) pixels / UnitCovariance
  Vector expectedError = Vector2(-3.0, 0.0);
 
  // Verify we get the expected error
  CHECK(assert_equal(expectedError, actualError, 1e-9));
}
 
/* ************************************************************************* */
TEST( ProjectionFactor, Jacobian ) {
  // Create the factor with a measurement that is 3 pixels off in x
  Key poseKey(X(1));
  Key pointKey(L(1));
  Point2 measurement(323.0, 240.0);
  TestProjectionFactor factor(measurement, model, poseKey, pointKey, K);
 
  // Set the linearization point
  Pose3 pose(Rot3(), Point3(0,0,-6));
  Point3 point(0.0, 0.0, 0.0);
 
  // Use the factor to calculate the Jacobians
  Matrix H1Actual, H2Actual;
  factor.evaluateError(pose, point, H1Actual, H2Actual);
 
  // The expected Jacobians
  Matrix H1Expected = (Matrix(2, 6) << 0., -554.256, 0., -92.376, 0., 0., 554.256, 0., 0., 0., -92.376, 0.).finished();
  Matrix H2Expected = (Matrix(2, 3) << 92.376, 0., 0., 0., 92.376, 0.).finished();
 
  // Verify the Jacobians are correct
  CHECK(assert_equal(H1Expected, H1Actual, 1e-3));
  CHECK(assert_equal(H2Expected, H2Actual, 1e-3));
}
 
/* ************************************************************************* */
TEST( ProjectionFactor, JacobianWithTransform ) {
  // Create the factor with a measurement that is 3 pixels off in x
  Key poseKey(X(1));
  Key pointKey(L(1));
  Point2 measurement(323.0, 240.0);
  Pose3 body_P_sensor(Rot3::RzRyRx(-M_PI_2, 0.0, -M_PI_2), Point3(0.25, -0.10, 1.0));
  TestProjectionFactor factor(measurement, model, poseKey, pointKey, K, body_P_sensor);
 
  // Set the linearization point. The vehicle pose has been selected to put the camera at (-6, 0, 0)
  Pose3 pose(Rot3(), Point3(-6.25, 0.10 , -1.0));
  Point3 point(0.0, 0.0, 0.0);
 
  // Use the factor to calculate the Jacobians
  Matrix H1Actual, H2Actual;
  factor.evaluateError(pose, point, H1Actual, H2Actual);
 
  // The expected Jacobians
  Matrix H1Expected = (Matrix(2, 6) << -92.376, 0., 577.350, 0., 92.376, 0., -9.2376, -577.350, 0., 0., 0., 92.376).finished();
  Matrix H2Expected = (Matrix(2, 3) << 0., -92.376, 0., 0., 0., -92.376).finished();
 
  // Verify the Jacobians are correct
  CHECK(assert_equal(H1Expected, H1Actual, 1e-3));
  CHECK(assert_equal(H2Expected, H2Actual, 1e-3));
}
 
/* ************************************************************************* */
int main() { TestResult tr; return TestRegistry::runAllTests(tr); }
/* ************************************************************************* */