SbgStatusCom

This is a ROS message definition.

Source

# SBG Ellipse Messages
# SbgStatus submessage

# PORT A: False in case of low level communication error.
bool port_a

# PORT B: False in case of low level communication error.
bool port_b

# PORT C: False in case of low level communication error.
bool port_c

# PORT D: False in case of low level communication error.
bool port_d

# PORT E: False in case of low level communication error.
bool port_e

# PORT A RX: False in case of saturation on PORT A input
bool port_a_rx

# PORT A TX: False in case of saturation on PORT A output
bool port_a_tx

# PORT B RX: False in case of saturation on PORT B input
bool port_b_rx

# PORT B TX: False in case of saturation on PORT B output
bool port_b_tx

# PORT C RX: False in case of saturation on PORT C input
bool port_c_rx

# PORT C TX: False in case of saturation on PORT C output
bool port_c_tx

# PORT D RX: False in case of saturation on PORT D input
bool port_d_rx

# PORT D TX: False in case of saturation on PORT D output
bool port_d_tx

# PORT E RX: False in case of saturation on PORT E input
bool port_e_rx

# PORT E TX: False in case of saturation on PORT E output
bool port_e_tx

# ETH 0: False in case of low level communication error.
bool eth_0

# ETH 1: False in case of low level communication error.
bool eth_1

# ETH 2: False in case of low level communication error.
bool eth_2

# ETH 3: False in case of low level communication error.
bool eth_3

# ETH 4: False in case of low level communication error.
bool eth_4

# ETH 0 RX: False in case of error on ETH0 input.
bool eth_0_rx

# ETH 0 TX: False in case of error on ETH0 output.
bool eth_0_tx

# ETH 1 RX: False in case of error on ETH1 input.
bool eth_1_rx

# ETH 1 TX: False in case of error on ETH1 output.
bool eth_1_tx

# ETH 2 RX: False in case of error on ETH2 input.
bool eth_2_rx

# ETH 2 TX: False in case of error on ETH2 output.
bool eth_2_tx

# ETH 3 RX: False in case of error on ETH3 input.
bool eth_3_rx

# ETH 3 TX: False in case of error on ETH3 output.
bool eth_3_tx

# ETH 4 RX: False in case of error on ETH4 input.
bool eth_4_rx

# ETH 4 TX: False in case of error on ETH4 output.
bool eth_4_tx

# CAN RX: False in case of saturation on CAN Bus output buffer
bool can_rx

# CAN TX: False in case of saturation on CAN Bus input buffer
bool can_tx

# CAN BUS
# 0 CAN BUS OFF 		Bus OFF operation due to too much errors.
# 1 CAN BUS TX_RX_ERR 	Transmit or received error.
# 2 CAN BUS OK 			The CAN bus is working correctly.
# 3 CAN BUS ERROR 		A general error has occurred on the CAN bus.
uint8 can_status