point_cloud_xyzi.cpp

Go to the documentation of this file.

/*********************************************************************
* Software License Agreement (BSD License)
* 
*  Copyright (c) 2008, Willow Garage, Inc.
*  All rights reserved.
* 
*  Redistribution and use in source and binary forms, with or without
*  modification, are permitted provided that the following conditions
*  are met:
* 
*   * Redistributions of source code must retain the above copyright
*     notice, this list of conditions and the following disclaimer.
*   * Redistributions in binary form must reproduce the above
*     copyright notice, this list of conditions and the following
*     disclaimer in the documentation and/or other materials provided
*     with the distribution.
*   * Neither the name of the Willow Garage nor the names of its
*     contributors may be used to endorse or promote products derived
*     from this software without specific prior written permission.
* 
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
*  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
*  COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
*  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
*  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
*  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
*  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
*  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
*  ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
*  POSSIBILITY OF SUCH DAMAGE.
*********************************************************************/
#include <boost/version.hpp>
#if ((BOOST_VERSION / 100) % 1000) >= 53
#include <boost/thread/lock_guard.hpp>
#endif
 
#include <ros/ros.h>
#include <nodelet/nodelet.h>
#include <image_transport/image_transport.h>
#include <image_transport/subscriber_filter.h>
#include <message_filters/subscriber.h>
#include <message_filters/synchronizer.h>
#include <message_filters/sync_policies/approximate_time.h>
#include <sensor_msgs/image_encodings.h>
#include <sensor_msgs/point_cloud2_iterator.h>
#include <sensor_msgs/PointCloud2.h>
#include <image_geometry/pinhole_camera_model.h>
#include <depth_image_proc/depth_traits.h>
#include <cv_bridge/cv_bridge.h>
#include <opencv2/imgproc/imgproc.hpp>
 
namespace depth_image_proc {
 
using namespace message_filters::sync_policies;
namespace enc = sensor_msgs::image_encodings;
 
class PointCloudXyziNodelet : public nodelet::Nodelet
{
  ros::NodeHandlePtr intensity_nh_;
  boost::shared_ptr<image_transport::ImageTransport> intensity_it_, depth_it_;
  
  // Subscriptions
  image_transport::SubscriberFilter sub_depth_, sub_intensity_;
  message_filters::Subscriber<sensor_msgs::CameraInfo> sub_info_;
  typedef ApproximateTime<sensor_msgs::Image, sensor_msgs::Image, sensor_msgs::CameraInfo> SyncPolicy;
  typedef message_filters::Synchronizer<SyncPolicy> Synchronizer;
  boost::shared_ptr<Synchronizer> sync_;
 
  // Publications
  boost::mutex connect_mutex_;
  typedef sensor_msgs::PointCloud2 PointCloud;
  ros::Publisher pub_point_cloud_;
 
  image_geometry::PinholeCameraModel model_;
 
  virtual void onInit();
 
  void connectCb();
 
  void imageCb(const sensor_msgs::ImageConstPtr& depth_msg,
               const sensor_msgs::ImageConstPtr& intensity_msg,
               const sensor_msgs::CameraInfoConstPtr& info_msg);
 
  template<typename T, typename T2>
  void convert(const sensor_msgs::ImageConstPtr& depth_msg,
               const sensor_msgs::ImageConstPtr& intensity_msg,
               const PointCloud::Ptr& cloud_msg);
};
 
void PointCloudXyziNodelet::onInit()
{
  ros::NodeHandle& nh         = getNodeHandle();
  ros::NodeHandle& private_nh = getPrivateNodeHandle();
  intensity_nh_.reset( new ros::NodeHandle(nh, "intensity") );
  ros::NodeHandle depth_nh(nh, "depth");
  intensity_it_  .reset( new image_transport::ImageTransport(*intensity_nh_) );
  depth_it_.reset( new image_transport::ImageTransport(depth_nh) );
 
  // Read parameters
  int queue_size;
  private_nh.param("queue_size", queue_size, 5);
 
  // Synchronize inputs. Topic subscriptions happen on demand in the connection callback.
  sync_.reset( new Synchronizer(SyncPolicy(queue_size), sub_depth_, sub_intensity_, sub_info_) );
  sync_->registerCallback(boost::bind(&PointCloudXyziNodelet::imageCb, this, boost::placeholders::_1, boost::placeholders::_2, boost::placeholders::_3));
  
  // Monitor whether anyone is subscribed to the output
  ros::SubscriberStatusCallback connect_cb = boost::bind(&PointCloudXyziNodelet::connectCb, this);
  // Make sure we don't enter connectCb() between advertising and assigning to pub_point_cloud_
  boost::lock_guard<boost::mutex> lock(connect_mutex_);
  pub_point_cloud_ = depth_nh.advertise<PointCloud>("points", 1, connect_cb, connect_cb);
}
 
// Handles (un)subscribing when clients (un)subscribe
void PointCloudXyziNodelet::connectCb()
{
  boost::lock_guard<boost::mutex> lock(connect_mutex_);
  if (pub_point_cloud_.getNumSubscribers() == 0)
  {
    sub_depth_.unsubscribe();
    sub_intensity_  .unsubscribe();
    sub_info_ .unsubscribe();
  }
  else if (!sub_depth_.getSubscriber())
  {
    ros::NodeHandle& private_nh = getPrivateNodeHandle();
    // parameter for depth_image_transport hint
    std::string depth_image_transport_param = "depth_image_transport";
 
    // depth image can use different transport.(e.g. compressedDepth)
    image_transport::TransportHints depth_hints("raw",ros::TransportHints(), private_nh, depth_image_transport_param);
    sub_depth_.subscribe(*depth_it_, "image_rect",       1, depth_hints);
 
    // intensity uses normal ros transport hints.
    image_transport::TransportHints hints("raw", ros::TransportHints(), private_nh);
    sub_intensity_.subscribe(*intensity_it_,   "image_rect", 1, hints);
    sub_info_.subscribe(*intensity_nh_,   "camera_info",      1);
  }
}
 
void PointCloudXyziNodelet::imageCb(const sensor_msgs::ImageConstPtr& depth_msg,
                                      const sensor_msgs::ImageConstPtr& intensity_msg_in,
                                      const sensor_msgs::CameraInfoConstPtr& info_msg)
{
  // Check for bad inputs
  if (depth_msg->header.frame_id != intensity_msg_in->header.frame_id)
  {
    NODELET_ERROR_THROTTLE(5, "Depth image frame id [%s] doesn't match image frame id [%s]",
                           depth_msg->header.frame_id.c_str(), intensity_msg_in->header.frame_id.c_str());
    return;
  }
 
  // Update camera model
  model_.fromCameraInfo(info_msg);
 
  // Check if the input image has to be resized
  sensor_msgs::ImageConstPtr intensity_msg = intensity_msg_in;
  if (depth_msg->width != intensity_msg->width || depth_msg->height != intensity_msg->height)
  {
    sensor_msgs::CameraInfo info_msg_tmp = *info_msg;
    info_msg_tmp.width = depth_msg->width;
    info_msg_tmp.height = depth_msg->height;
    float ratio = float(depth_msg->width)/float(intensity_msg->width);
    info_msg_tmp.K[0] *= ratio;
    info_msg_tmp.K[2] *= ratio;
    info_msg_tmp.K[4] *= ratio;
    info_msg_tmp.K[5] *= ratio;
    info_msg_tmp.P[0] *= ratio;
    info_msg_tmp.P[2] *= ratio;
    info_msg_tmp.P[5] *= ratio;
    info_msg_tmp.P[6] *= ratio;
    model_.fromCameraInfo(info_msg_tmp);
 
    cv_bridge::CvImageConstPtr cv_ptr;
    try
    {
      cv_ptr = cv_bridge::toCvShare(intensity_msg, intensity_msg->encoding);
    }
    catch (cv_bridge::Exception& e)
    {
      ROS_ERROR("cv_bridge exception: %s", e.what());
      return;
    }
    cv_bridge::CvImage cv_rsz;
    cv_rsz.header = cv_ptr->header;
    cv_rsz.encoding = cv_ptr->encoding;
    cv::resize(cv_ptr->image.rowRange(0,depth_msg->height/ratio), cv_rsz.image, cv::Size(depth_msg->width, depth_msg->height));
    if ((intensity_msg->encoding == enc::MONO8) || (intensity_msg->encoding == enc::MONO16))
      intensity_msg = cv_rsz.toImageMsg();
    else
      intensity_msg = cv_bridge::toCvCopy(cv_rsz.toImageMsg(), enc::MONO8)->toImageMsg();
 
    //NODELET_ERROR_THROTTLE(5, "Depth resolution (%ux%u) does not match resolution (%ux%u)",
    //                       depth_msg->width, depth_msg->height, rgb_msg->width, rgb_msg->height);
    //return;
  } else
    intensity_msg = intensity_msg_in;
 
  // Supported color encodings: MONO8, MONO16
  if (intensity_msg->encoding != enc::MONO8 && intensity_msg->encoding != enc::MONO16)
  {
    try
    {
      intensity_msg = cv_bridge::toCvCopy(intensity_msg, enc::MONO8)->toImageMsg();
    }
    catch (cv_bridge::Exception& e)
    {
      NODELET_ERROR_THROTTLE(5, "Unsupported encoding [%s]: %s", intensity_msg->encoding.c_str(), e.what());
      return;
    }
  }
 
  // Allocate new point cloud message
  PointCloud::Ptr cloud_msg (new PointCloud);
  cloud_msg->header = depth_msg->header; // Use depth image time stamp
  cloud_msg->height = depth_msg->height;
  cloud_msg->width  = depth_msg->width;
  cloud_msg->is_dense = false;
  cloud_msg->is_bigendian = false;
 
  sensor_msgs::PointCloud2Modifier pcd_modifier(*cloud_msg);
//  pcd_modifier.setPointCloud2FieldsByString(2, "xyz", "i");
  pcd_modifier.setPointCloud2Fields(4,
   "x", 1, sensor_msgs::PointField::FLOAT32,
   "y", 1, sensor_msgs::PointField::FLOAT32,
   "z", 1, sensor_msgs::PointField::FLOAT32,
   "intensity", 1, sensor_msgs::PointField::FLOAT32);
 
 
  if (depth_msg->encoding == enc::TYPE_16UC1 && 
      intensity_msg->encoding == enc::MONO8)
  {
    convert<uint16_t, uint8_t>(depth_msg, intensity_msg, cloud_msg);
  }
  else if (depth_msg->encoding == enc::TYPE_16UC1 && 
      intensity_msg->encoding == enc::MONO16)
  {
    convert<uint16_t, uint16_t>(depth_msg, intensity_msg, cloud_msg);
  }
  else if (depth_msg->encoding == enc::TYPE_16UC1 &&
      intensity_msg->encoding == enc::TYPE_32FC1)
  {
    convert<uint16_t,float>(depth_msg, intensity_msg, cloud_msg);
  }
  else if (depth_msg->encoding == enc::TYPE_32FC1 &&
      intensity_msg->encoding == enc::MONO8)
  {
    convert<float, uint8_t>(depth_msg, intensity_msg, cloud_msg);
  }
  else if (depth_msg->encoding == enc::TYPE_32FC1 &&
      intensity_msg->encoding == enc::MONO16)
  {
    convert<float, uint16_t>(depth_msg, intensity_msg, cloud_msg);
  }
  else if (depth_msg->encoding == enc::TYPE_32FC1 &&
      intensity_msg->encoding == enc::TYPE_32FC1)
  {
    convert<float,float>(depth_msg, intensity_msg, cloud_msg);
  }
  else
  {
    NODELET_ERROR_THROTTLE(5, "Depth image has unsupported encoding [%s]", depth_msg->encoding.c_str());
    return;
  }
 
  pub_point_cloud_.publish (cloud_msg);
}
 
template<typename T, typename T2>
void PointCloudXyziNodelet::convert(const sensor_msgs::ImageConstPtr& depth_msg,
                                      const sensor_msgs::ImageConstPtr& intensity_msg,
                                      const PointCloud::Ptr& cloud_msg)
{
  // Use correct principal point from calibration
  float center_x = model_.cx();
  float center_y = model_.cy();
 
  // Combine unit conversion (if necessary) with scaling by focal length for computing (X,Y)
  double unit_scaling = DepthTraits<T>::toMeters( T(1) );
  float constant_x = unit_scaling / model_.fx();
  float constant_y = unit_scaling / model_.fy();
  float bad_point = std::numeric_limits<float>::quiet_NaN ();
  
  const T* depth_row = reinterpret_cast<const T*>(&depth_msg->data[0]);
  int row_step = depth_msg->step / sizeof(T);
 
  const T2* inten_row = reinterpret_cast<const T2*>(&intensity_msg->data[0]);
  int inten_row_step  = intensity_msg->step / sizeof(T2);
 
  sensor_msgs::PointCloud2Iterator<float> iter_x(*cloud_msg, "x");
  sensor_msgs::PointCloud2Iterator<float> iter_y(*cloud_msg, "y");
  sensor_msgs::PointCloud2Iterator<float> iter_z(*cloud_msg, "z");
  sensor_msgs::PointCloud2Iterator<float> iter_i(*cloud_msg, "intensity");
 
  for (int v = 0; v < int(cloud_msg->height); ++v, depth_row += row_step, inten_row += inten_row_step)
  {
    for (int u = 0; u < int(cloud_msg->width); ++u, ++iter_x, ++iter_y, ++iter_z, ++iter_i)
    {
      T depth = depth_row[u];
      T2 inten = inten_row[u];
      // Check for invalid measurements
      if (!DepthTraits<T>::valid(depth))
      {
        *iter_x = *iter_y = *iter_z = bad_point;
      }
      else
      {
        // Fill in XYZ
        *iter_x = (u - center_x) * depth * constant_x;
        *iter_y = (v - center_y) * depth * constant_y;
        *iter_z = DepthTraits<T>::toMeters(depth);
      }
 
      // Fill in intensity
      *iter_i = inten;
    }
  }
}
 
} // namespace depth_image_proc
 
// Register as nodelet
#include <pluginlib/class_list_macros.hpp>
PLUGINLIB_EXPORT_CLASS(depth_image_proc::PointCloudXyziNodelet,nodelet::Nodelet);