RxmRAWXMeas
This is a ROS message definition.
Source
# see message RxmRAWX
#
float64 pr_mes # Pseudorange measurement [m]. GLONASS inter frequency
# channel delays are compensated with an internal
# calibration table.
float64 cp_mes # Carrier phase measurement [L1 cycles]. The carrier
# phase initial ambiguity is initialized using an
# approximate value to make the magnitude of
# the phase close to the pseudorange
# measurement. Clock resets are applied to both
# phase and code measurements in accordance
# with the RINEX specification.
float32 do_mes # Doppler measurement [Hz] (positive sign for
# approaching satellites)
uint8 gnss_id # GNSS identifier (see CfgGNSS for constants)
uint8 sv_id # Satellite identifier (see Satellite Numbering)
uint8 reserved0 # Reserved
uint8 freq_id # Only used for GLONASS: This is the frequency
# slot + 7 (range from 0 to 13)
uint16 locktime # Carrier phase locktime counter [ms]
# (maximum 64500 ms)
int8 cno # Carrier-to-noise density ratio (signal strength)
# [dB-Hz]
uint8 pr_stdev # Estimated pseudorange measurement standard
# deviation [m / 0.01*2^n]
uint8 cp_stdev # Estimated carrier phase measurement standard
# deviation (note a raw value of 0x0F indicates the
# value is invalid) [cycles / 0.004]
uint8 do_stdev # Estimated Doppler measurement standard deviation
# [Hz / 0.002*2^n]
uint8 trk_stat # Tracking status bitfield
uint8 TRK_STAT_PR_VALID = 1 # Pseudorange valid
uint8 TRK_STAT_CP_VALID = 2 # Carrier phase valid
uint8 TRK_STAT_HALF_CYC = 4 # Half cycle valid
uint8 TRK_STAT_SUB_HALF_CYC = 8 # Half cycle subtracted from phase
uint8 reserved1 # Reserved