optimal_planner.cpp

Go to the documentation of this file.

/*********************************************************************
 *
 * Software License Agreement (BSD License)
 *
 *  Copyright (c) 2016,
 *  TU Dortmund - Institute of Control Theory and Systems Engineering.
 *  All rights reserved.
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions
 *  are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials provided
 *     with the distribution.
 *   * Neither the name of the institute nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 *  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 *  COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 *  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 *  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 *  ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 *  POSSIBILITY OF SUCH DAMAGE.
 *
 * Author: Christoph Rösmann
 *********************************************************************/

#include <teb_local_planner/optimal_planner.h>
#include <map>
#include <limits>


namespace teb_local_planner
{

// ============== Implementation ===================

TebOptimalPlanner::TebOptimalPlanner() : cfg_(NULL), obstacles_(NULL), via_points_(NULL), cost_(HUGE_VAL), prefer_rotdir_(RotType::none),
                                         robot_model_(new PointRobotFootprint()), initialized_(false), optimized_(false)
{    
}
  
TebOptimalPlanner::TebOptimalPlanner(const TebConfig& cfg, ObstContainer* obstacles, RobotFootprintModelPtr robot_model, TebVisualizationPtr visual, const ViaPointContainer* via_points)
{    
  initialize(cfg, obstacles, robot_model, visual, via_points);
}

TebOptimalPlanner::~TebOptimalPlanner()
{
  clearGraph();
  // free dynamically allocated memory
  //if (optimizer_) 
  //  g2o::Factory::destroy();
  //g2o::OptimizationAlgorithmFactory::destroy();
  //g2o::HyperGraphActionLibrary::destroy();
}

void TebOptimalPlanner::initialize(const TebConfig& cfg, ObstContainer* obstacles, RobotFootprintModelPtr robot_model, TebVisualizationPtr visual, const ViaPointContainer* via_points)
{    
  // init optimizer (set solver and block ordering settings)
  optimizer_ = initOptimizer();
  
  cfg_ = &cfg;
  obstacles_ = obstacles;
  robot_model_ = robot_model;
  via_points_ = via_points;
  cost_ = HUGE_VAL;
  prefer_rotdir_ = RotType::none;
  setVisualization(visual);
  
  vel_start_.first = true;
  vel_start_.second.linear.x = 0;
  vel_start_.second.linear.y = 0;
  vel_start_.second.angular.z = 0;

  vel_goal_.first = true;
  vel_goal_.second.linear.x = 0;
  vel_goal_.second.linear.y = 0;
  vel_goal_.second.angular.z = 0;
  initialized_ = true;
}


void TebOptimalPlanner::setVisualization(TebVisualizationPtr visualization)
{
  visualization_ = visualization;
}

void TebOptimalPlanner::visualize()
{
  if (!visualization_)
    return;
 
  visualization_->publishLocalPlanAndPoses(teb_);
  
  if (teb_.sizePoses() > 0)
    visualization_->publishRobotFootprintModel(teb_.Pose(0), *robot_model_);
  
  if (cfg_->trajectory.publish_feedback)
    visualization_->publishFeedbackMessage(*this, *obstacles_);
 
}


/*
 * registers custom vertices and edges in g2o framework
 */
void TebOptimalPlanner::registerG2OTypes()
{
  g2o::Factory* factory = g2o::Factory::instance();
  factory->registerType("VERTEX_POSE", new g2o::HyperGraphElementCreator<VertexPose>);
  factory->registerType("VERTEX_TIMEDIFF", new g2o::HyperGraphElementCreator<VertexTimeDiff>);

  factory->registerType("EDGE_TIME_OPTIMAL", new g2o::HyperGraphElementCreator<EdgeTimeOptimal>);
  factory->registerType("EDGE_SHORTEST_PATH", new g2o::HyperGraphElementCreator<EdgeShortestPath>);
  factory->registerType("EDGE_VELOCITY", new g2o::HyperGraphElementCreator<EdgeVelocity>);
  factory->registerType("EDGE_VELOCITY_HOLONOMIC", new g2o::HyperGraphElementCreator<EdgeVelocityHolonomic>);
  factory->registerType("EDGE_ACCELERATION", new g2o::HyperGraphElementCreator<EdgeAcceleration>);
  factory->registerType("EDGE_ACCELERATION_START", new g2o::HyperGraphElementCreator<EdgeAccelerationStart>);
  factory->registerType("EDGE_ACCELERATION_GOAL", new g2o::HyperGraphElementCreator<EdgeAccelerationGoal>);
  factory->registerType("EDGE_ACCELERATION_HOLONOMIC", new g2o::HyperGraphElementCreator<EdgeAccelerationHolonomic>);
  factory->registerType("EDGE_ACCELERATION_HOLONOMIC_START", new g2o::HyperGraphElementCreator<EdgeAccelerationHolonomicStart>);
  factory->registerType("EDGE_ACCELERATION_HOLONOMIC_GOAL", new g2o::HyperGraphElementCreator<EdgeAccelerationHolonomicGoal>);
  factory->registerType("EDGE_KINEMATICS_DIFF_DRIVE", new g2o::HyperGraphElementCreator<EdgeKinematicsDiffDrive>);
  factory->registerType("EDGE_KINEMATICS_CARLIKE", new g2o::HyperGraphElementCreator<EdgeKinematicsCarlike>);
  factory->registerType("EDGE_OBSTACLE", new g2o::HyperGraphElementCreator<EdgeObstacle>);
  factory->registerType("EDGE_INFLATED_OBSTACLE", new g2o::HyperGraphElementCreator<EdgeInflatedObstacle>);
  factory->registerType("EDGE_DYNAMIC_OBSTACLE", new g2o::HyperGraphElementCreator<EdgeDynamicObstacle>);
  factory->registerType("EDGE_VIA_POINT", new g2o::HyperGraphElementCreator<EdgeViaPoint>);
  factory->registerType("EDGE_PREFER_ROTDIR", new g2o::HyperGraphElementCreator<EdgePreferRotDir>);
  return;
}

/*
 * initialize g2o optimizer. Set solver settings here.
 * Return: pointer to new SparseOptimizer Object.
 */
boost::shared_ptr<g2o::SparseOptimizer> TebOptimalPlanner::initOptimizer()
{
  // Call register_g2o_types once, even for multiple TebOptimalPlanner instances (thread-safe)
  static boost::once_flag flag = BOOST_ONCE_INIT;
  boost::call_once(&registerG2OTypes, flag);  

  // allocating the optimizer
  boost::shared_ptr<g2o::SparseOptimizer> optimizer = boost::make_shared<g2o::SparseOptimizer>();
  TEBLinearSolver* linearSolver = new TEBLinearSolver(); // see typedef in optimization.h
  linearSolver->setBlockOrdering(true);
  TEBBlockSolver* blockSolver = new TEBBlockSolver(linearSolver);
  g2o::OptimizationAlgorithmLevenberg* solver = new g2o::OptimizationAlgorithmLevenberg(blockSolver);

  optimizer->setAlgorithm(solver);
  
  optimizer->initMultiThreading(); // required for >Eigen 3.1
  
  return optimizer;
}


bool TebOptimalPlanner::optimizeTEB(int iterations_innerloop, int iterations_outerloop, bool compute_cost_afterwards,
                                    double obst_cost_scale, double viapoint_cost_scale, bool alternative_time_cost)
{
  if (cfg_->optim.optimization_activate==false) 
    return false;
  
  bool success = false;
  optimized_ = false;
  
  double weight_multiplier = 1.0;

  // TODO(roesmann): we introduced the non-fast mode with the support of dynamic obstacles
  //                (which leads to better results in terms of x-y-t homotopy planning).
  //                 however, we have not tested this mode intensively yet, so we keep
  //                 the legacy fast mode as default until we finish our tests.
  bool fast_mode = !cfg_->obstacles.include_dynamic_obstacles;
  
  for(int i=0; i<iterations_outerloop; ++i)
  {
    if (cfg_->trajectory.teb_autosize)
    {
      //teb_.autoResize(cfg_->trajectory.dt_ref, cfg_->trajectory.dt_hysteresis, cfg_->trajectory.min_samples, cfg_->trajectory.max_samples);
      teb_.autoResize(cfg_->trajectory.dt_ref, cfg_->trajectory.dt_hysteresis, cfg_->trajectory.min_samples, cfg_->trajectory.max_samples, fast_mode);

    }

    success = buildGraph(weight_multiplier);
    if (!success) 
    {
        clearGraph();
        return false;
    }
    success = optimizeGraph(iterations_innerloop, false);
    if (!success) 
    {
        clearGraph();
        return false;
    }
    optimized_ = true;
    
    if (compute_cost_afterwards && i==iterations_outerloop-1) // compute cost vec only in the last iteration
      computeCurrentCost(obst_cost_scale, viapoint_cost_scale, alternative_time_cost);
      
    clearGraph();
    
    weight_multiplier *= cfg_->optim.weight_adapt_factor;
  }

  return true;
}

void TebOptimalPlanner::setVelocityStart(const geometry_msgs::Twist& vel_start)
{
  vel_start_.first = true;
  vel_start_.second.linear.x = vel_start.linear.x;
  vel_start_.second.linear.y = vel_start.linear.y;
  vel_start_.second.angular.z = vel_start.angular.z;
}

void TebOptimalPlanner::setVelocityGoal(const geometry_msgs::Twist& vel_goal)
{
  vel_goal_.first = true;
  vel_goal_.second = vel_goal;
}

bool TebOptimalPlanner::plan(const std::vector<geometry_msgs::PoseStamped>& initial_plan, const geometry_msgs::Twist* start_vel, bool free_goal_vel)
{    
  ROS_ASSERT_MSG(initialized_, "Call initialize() first.");
  if (!teb_.isInit())
  {
    // init trajectory
    teb_.initTrajectoryToGoal(initial_plan, cfg_->robot.max_vel_x, cfg_->trajectory.global_plan_overwrite_orientation, cfg_->trajectory.min_samples, cfg_->trajectory.allow_init_with_backwards_motion);
  } 
  else // warm start
  {
    PoseSE2 start_(initial_plan.front().pose);
    PoseSE2 goal_(initial_plan.back().pose);
    if (teb_.sizePoses()>0
        && (goal_.position() - teb_.BackPose().position()).norm() < cfg_->trajectory.force_reinit_new_goal_dist
        && fabs(g2o::normalize_theta(goal_.theta() - teb_.BackPose().theta())) < cfg_->trajectory.force_reinit_new_goal_angular) // actual warm start!
      teb_.updateAndPruneTEB(start_, goal_, cfg_->trajectory.min_samples); // update TEB
    else // goal too far away -> reinit
    {
      ROS_DEBUG("New goal: distance to existing goal is higher than the specified threshold. Reinitalizing trajectories.");
      teb_.clearTimedElasticBand();
      teb_.initTrajectoryToGoal(initial_plan, cfg_->robot.max_vel_x, true, cfg_->trajectory.min_samples, cfg_->trajectory.allow_init_with_backwards_motion);
    }
  }
  if (start_vel)
    setVelocityStart(*start_vel);
  if (free_goal_vel)
    setVelocityGoalFree();
  else
    vel_goal_.first = true; // we just reactivate and use the previously set velocity (should be zero if nothing was modified)
  
  // now optimize
  return optimizeTEB(cfg_->optim.no_inner_iterations, cfg_->optim.no_outer_iterations);
}


bool TebOptimalPlanner::plan(const tf::Pose& start, const tf::Pose& goal, const geometry_msgs::Twist* start_vel, bool free_goal_vel)
{
  PoseSE2 start_(start);
  PoseSE2 goal_(goal);
  return plan(start_, goal_, start_vel);
}

bool TebOptimalPlanner::plan(const PoseSE2& start, const PoseSE2& goal, const geometry_msgs::Twist* start_vel, bool free_goal_vel)
{       
  ROS_ASSERT_MSG(initialized_, "Call initialize() first.");
  if (!teb_.isInit())
  {
    // init trajectory
    teb_.initTrajectoryToGoal(start, goal, 0, cfg_->robot.max_vel_x, cfg_->trajectory.min_samples, cfg_->trajectory.allow_init_with_backwards_motion); // 0 intermediate samples, but dt=1 -> autoResize will add more samples before calling first optimization
  }
  else // warm start
  {
    if (teb_.sizePoses() > 0
        && (goal.position() - teb_.BackPose().position()).norm() < cfg_->trajectory.force_reinit_new_goal_dist
        && fabs(g2o::normalize_theta(goal.theta() - teb_.BackPose().theta())) < cfg_->trajectory.force_reinit_new_goal_angular) // actual warm start!
      teb_.updateAndPruneTEB(start, goal, cfg_->trajectory.min_samples);
    else // goal too far away -> reinit
    {
      ROS_DEBUG("New goal: distance to existing goal is higher than the specified threshold. Reinitalizing trajectories.");
      teb_.clearTimedElasticBand();
      teb_.initTrajectoryToGoal(start, goal, 0, cfg_->robot.max_vel_x, cfg_->trajectory.min_samples, cfg_->trajectory.allow_init_with_backwards_motion);
    }
  }
  if (start_vel)
    setVelocityStart(*start_vel);
  if (free_goal_vel)
    setVelocityGoalFree();
  else
    vel_goal_.first = true; // we just reactivate and use the previously set velocity (should be zero if nothing was modified)
      
  // now optimize
  return optimizeTEB(cfg_->optim.no_inner_iterations, cfg_->optim.no_outer_iterations);
}


bool TebOptimalPlanner::buildGraph(double weight_multiplier)
{
  if (!optimizer_->edges().empty() || !optimizer_->vertices().empty())
  {
    ROS_WARN("Cannot build graph, because it is not empty. Call graphClear()!");
    return false;
  }
  
  // add TEB vertices
  AddTEBVertices();
  
  // add Edges (local cost functions)
  if (cfg_->obstacles.legacy_obstacle_association)
    AddEdgesObstaclesLegacy(weight_multiplier);
  else
    AddEdgesObstacles(weight_multiplier);

  if (cfg_->obstacles.include_dynamic_obstacles)
    AddEdgesDynamicObstacles();
  
  AddEdgesViaPoints();
  
  AddEdgesVelocity();
  
  AddEdgesAcceleration();

  AddEdgesTimeOptimal();        

  AddEdgesShortestPath();
  
  if (cfg_->robot.min_turning_radius == 0 || cfg_->optim.weight_kinematics_turning_radius == 0)
    AddEdgesKinematicsDiffDrive(); // we have a differential drive robot
  else
    AddEdgesKinematicsCarlike(); // we have a carlike robot since the turning radius is bounded from below.

    
  AddEdgesPreferRotDir();
    
  return true;  
}

bool TebOptimalPlanner::optimizeGraph(int no_iterations,bool clear_after)
{
  if (cfg_->robot.max_vel_x<0.01)
  {
    ROS_WARN("optimizeGraph(): Robot Max Velocity is smaller than 0.01m/s. Optimizing aborted...");
    if (clear_after) clearGraph();
    return false;       
  }
  
  if (!teb_.isInit() || teb_.sizePoses() < cfg_->trajectory.min_samples)
  {
    ROS_WARN("optimizeGraph(): TEB is empty or has too less elements. Skipping optimization.");
    if (clear_after) clearGraph();
    return false;       
  }
  
  optimizer_->setVerbose(cfg_->optim.optimization_verbose);
  optimizer_->initializeOptimization();

  int iter = optimizer_->optimize(no_iterations);

  // Save Hessian for visualization
  //  g2o::OptimizationAlgorithmLevenberg* lm = dynamic_cast<g2o::OptimizationAlgorithmLevenberg*> (optimizer_->solver());
  //  lm->solver()->saveHessian("~/MasterThesis/Matlab/Hessian.txt");

  if(!iter)
  {
        ROS_ERROR("optimizeGraph(): Optimization failed! iter=%i", iter);
        return false;
  }

  if (clear_after) clearGraph();        
    
  return true;
}

void TebOptimalPlanner::clearGraph()
{
  // clear optimizer states
  if (optimizer_)
  {
    //optimizer.edges().clear(); // optimizer.clear deletes edges!!! Therefore do not run optimizer.edges().clear()
    optimizer_->vertices().clear();  // neccessary, because optimizer->clear deletes pointer-targets (therefore it deletes TEB states!)
    optimizer_->clear();
  }
}



void TebOptimalPlanner::AddTEBVertices()
{
  // add vertices to graph
  ROS_DEBUG_COND(cfg_->optim.optimization_verbose, "Adding TEB vertices ...");
  unsigned int id_counter = 0; // used for vertices ids
  for (int i=0; i<teb_.sizePoses(); ++i)
  {
    teb_.PoseVertex(i)->setId(id_counter++);
    optimizer_->addVertex(teb_.PoseVertex(i));
    if (teb_.sizeTimeDiffs()!=0 && i<teb_.sizeTimeDiffs())
    {
      teb_.TimeDiffVertex(i)->setId(id_counter++);
      optimizer_->addVertex(teb_.TimeDiffVertex(i));
    }
  } 
}


void TebOptimalPlanner::AddEdgesObstacles(double weight_multiplier)
{
  if (cfg_->optim.weight_obstacle==0 || weight_multiplier==0 || obstacles_==nullptr )
    return; // if weight equals zero skip adding edges!
    
  
  bool inflated = cfg_->obstacles.inflation_dist > cfg_->obstacles.min_obstacle_dist;

  Eigen::Matrix<double,1,1> information;
  information.fill(cfg_->optim.weight_obstacle * weight_multiplier);
  
  Eigen::Matrix<double,2,2> information_inflated;
  information_inflated(0,0) = cfg_->optim.weight_obstacle * weight_multiplier;
  information_inflated(1,1) = cfg_->optim.weight_inflation;
  information_inflated(0,1) = information_inflated(1,0) = 0;
    
  // iterate all teb points (skip first and last)
  for (int i=1; i < teb_.sizePoses()-1; ++i)
  {    
      double left_min_dist = std::numeric_limits<double>::max();
      double right_min_dist = std::numeric_limits<double>::max();
      Obstacle* left_obstacle = nullptr;
      Obstacle* right_obstacle = nullptr;
      
      std::vector<Obstacle*> relevant_obstacles;
      
      const Eigen::Vector2d pose_orient = teb_.Pose(i).orientationUnitVec();
      
      // iterate obstacles
      for (const ObstaclePtr& obst : *obstacles_)
      {
        // we handle dynamic obstacles differently below
        if(cfg_->obstacles.include_dynamic_obstacles && obst->isDynamic())
          continue;

          // calculate distance to robot model
          double dist = robot_model_->calculateDistance(teb_.Pose(i), obst.get());
          
          // force considering obstacle if really close to the current pose
        if (dist < cfg_->obstacles.min_obstacle_dist*cfg_->obstacles.obstacle_association_force_inclusion_factor)
          {
              relevant_obstacles.push_back(obst.get());
              continue;
          }
          // cut-off distance
          if (dist > cfg_->obstacles.min_obstacle_dist*cfg_->obstacles.obstacle_association_cutoff_factor)
            continue;
          
          // determine side (left or right) and assign obstacle if closer than the previous one
          if (cross2d(pose_orient, obst->getCentroid()) > 0) // left
          {
              if (dist < left_min_dist)
              {
                  left_min_dist = dist;
                  left_obstacle = obst.get();
              }
          }
          else
          {
              if (dist < right_min_dist)
              {
                  right_min_dist = dist;
                  right_obstacle = obst.get();
              }
          }
      }   
      
      // create obstacle edges
      if (left_obstacle)
      {
            if (inflated)
            {
                EdgeInflatedObstacle* dist_bandpt_obst = new EdgeInflatedObstacle;
                dist_bandpt_obst->setVertex(0,teb_.PoseVertex(i));
                dist_bandpt_obst->setInformation(information_inflated);
                dist_bandpt_obst->setParameters(*cfg_, robot_model_.get(), left_obstacle);
                optimizer_->addEdge(dist_bandpt_obst);
            }
            else
            {
                EdgeObstacle* dist_bandpt_obst = new EdgeObstacle;
                dist_bandpt_obst->setVertex(0,teb_.PoseVertex(i));
                dist_bandpt_obst->setInformation(information);
                dist_bandpt_obst->setParameters(*cfg_, robot_model_.get(), left_obstacle);
                optimizer_->addEdge(dist_bandpt_obst);
            }
      }
      
      if (right_obstacle)
      {
            if (inflated)
            {
                EdgeInflatedObstacle* dist_bandpt_obst = new EdgeInflatedObstacle;
                dist_bandpt_obst->setVertex(0,teb_.PoseVertex(i));
                dist_bandpt_obst->setInformation(information_inflated);
                dist_bandpt_obst->setParameters(*cfg_, robot_model_.get(), right_obstacle);
                optimizer_->addEdge(dist_bandpt_obst);
            }
            else
            {
                EdgeObstacle* dist_bandpt_obst = new EdgeObstacle;
                dist_bandpt_obst->setVertex(0,teb_.PoseVertex(i));
                dist_bandpt_obst->setInformation(information);
                dist_bandpt_obst->setParameters(*cfg_, robot_model_.get(), right_obstacle);
                optimizer_->addEdge(dist_bandpt_obst);
            }   
      }
      
      for (const Obstacle* obst : relevant_obstacles)
      {
            if (inflated)
            {
                EdgeInflatedObstacle* dist_bandpt_obst = new EdgeInflatedObstacle;
                dist_bandpt_obst->setVertex(0,teb_.PoseVertex(i));
                dist_bandpt_obst->setInformation(information_inflated);
                dist_bandpt_obst->setParameters(*cfg_, robot_model_.get(), obst);
                optimizer_->addEdge(dist_bandpt_obst);
            }
            else
            {
                EdgeObstacle* dist_bandpt_obst = new EdgeObstacle;
                dist_bandpt_obst->setVertex(0,teb_.PoseVertex(i));
                dist_bandpt_obst->setInformation(information);
                dist_bandpt_obst->setParameters(*cfg_, robot_model_.get(), obst);
                optimizer_->addEdge(dist_bandpt_obst);
            }   
      }
  }  
        
}


void TebOptimalPlanner::AddEdgesObstaclesLegacy(double weight_multiplier)
{
  if (cfg_->optim.weight_obstacle==0 || weight_multiplier==0 || obstacles_==nullptr)
    return; // if weight equals zero skip adding edges!

  Eigen::Matrix<double,1,1> information; 
  information.fill(cfg_->optim.weight_obstacle * weight_multiplier);
    
  Eigen::Matrix<double,2,2> information_inflated;
  information_inflated(0,0) = cfg_->optim.weight_obstacle * weight_multiplier;
  information_inflated(1,1) = cfg_->optim.weight_inflation;
  information_inflated(0,1) = information_inflated(1,0) = 0;
  
  bool inflated = cfg_->obstacles.inflation_dist > cfg_->obstacles.min_obstacle_dist;
    
  for (ObstContainer::const_iterator obst = obstacles_->begin(); obst != obstacles_->end(); ++obst)
  {
    if (cfg_->obstacles.include_dynamic_obstacles && (*obst)->isDynamic()) // we handle dynamic obstacles differently below
      continue; 
    
    int index;
    
    if (cfg_->obstacles.obstacle_poses_affected >= teb_.sizePoses())
      index =  teb_.sizePoses() / 2;
    else
      index = teb_.findClosestTrajectoryPose(*(obst->get()));
     
    
    // check if obstacle is outside index-range between start and goal
    if ( (index <= 1) || (index > teb_.sizePoses()-2) ) // start and goal are fixed and findNearestBandpoint finds first or last conf if intersection point is outside the range
            continue; 
        
    if (inflated)
    {
        EdgeInflatedObstacle* dist_bandpt_obst = new EdgeInflatedObstacle;
        dist_bandpt_obst->setVertex(0,teb_.PoseVertex(index));
        dist_bandpt_obst->setInformation(information_inflated);
        dist_bandpt_obst->setParameters(*cfg_, robot_model_.get(), obst->get());
        optimizer_->addEdge(dist_bandpt_obst);
    }
    else
    {
        EdgeObstacle* dist_bandpt_obst = new EdgeObstacle;
        dist_bandpt_obst->setVertex(0,teb_.PoseVertex(index));
        dist_bandpt_obst->setInformation(information);
        dist_bandpt_obst->setParameters(*cfg_, robot_model_.get(), obst->get());
        optimizer_->addEdge(dist_bandpt_obst);
    }

    for (int neighbourIdx=0; neighbourIdx < floor(cfg_->obstacles.obstacle_poses_affected/2); neighbourIdx++)
    {
      if (index+neighbourIdx < teb_.sizePoses())
      {
            if (inflated)
            {
                EdgeInflatedObstacle* dist_bandpt_obst_n_r = new EdgeInflatedObstacle;
                dist_bandpt_obst_n_r->setVertex(0,teb_.PoseVertex(index+neighbourIdx));
                dist_bandpt_obst_n_r->setInformation(information_inflated);
                dist_bandpt_obst_n_r->setParameters(*cfg_, robot_model_.get(), obst->get());
                optimizer_->addEdge(dist_bandpt_obst_n_r);
            }
            else
            {
                EdgeObstacle* dist_bandpt_obst_n_r = new EdgeObstacle;
                dist_bandpt_obst_n_r->setVertex(0,teb_.PoseVertex(index+neighbourIdx));
                dist_bandpt_obst_n_r->setInformation(information);
                dist_bandpt_obst_n_r->setParameters(*cfg_, robot_model_.get(), obst->get());
                optimizer_->addEdge(dist_bandpt_obst_n_r);
            }
      }
      if ( index - neighbourIdx >= 0) // needs to be casted to int to allow negative values
      {
            if (inflated)
            {
                EdgeInflatedObstacle* dist_bandpt_obst_n_l = new EdgeInflatedObstacle;
                dist_bandpt_obst_n_l->setVertex(0,teb_.PoseVertex(index-neighbourIdx));
                dist_bandpt_obst_n_l->setInformation(information_inflated);
                dist_bandpt_obst_n_l->setParameters(*cfg_, robot_model_.get(), obst->get());
                optimizer_->addEdge(dist_bandpt_obst_n_l);
            }
            else
            {
                EdgeObstacle* dist_bandpt_obst_n_l = new EdgeObstacle;
                dist_bandpt_obst_n_l->setVertex(0,teb_.PoseVertex(index-neighbourIdx));
                dist_bandpt_obst_n_l->setInformation(information);
                dist_bandpt_obst_n_l->setParameters(*cfg_, robot_model_.get(), obst->get());
                optimizer_->addEdge(dist_bandpt_obst_n_l);
            }
      }
    } 
    
  }
}


void TebOptimalPlanner::AddEdgesDynamicObstacles(double weight_multiplier)
{
  if (cfg_->optim.weight_obstacle==0 || weight_multiplier==0 || obstacles_==NULL )
    return; // if weight equals zero skip adding edges!

  Eigen::Matrix<double,2,2> information;
  information(0,0) = cfg_->optim.weight_dynamic_obstacle * weight_multiplier;
  information(1,1) = cfg_->optim.weight_dynamic_obstacle_inflation;
  information(0,1) = information(1,0) = 0;
  
  for (ObstContainer::const_iterator obst = obstacles_->begin(); obst != obstacles_->end(); ++obst)
  {
    if (!(*obst)->isDynamic())
      continue;

    // Skip first and last pose, as they are fixed
    double time = teb_.TimeDiff(0);
    for (int i=1; i < teb_.sizePoses() - 1; ++i)
    {
      EdgeDynamicObstacle* dynobst_edge = new EdgeDynamicObstacle(time);
      dynobst_edge->setVertex(0,teb_.PoseVertex(i));
      dynobst_edge->setInformation(information);
      dynobst_edge->setParameters(*cfg_, robot_model_.get(), obst->get());
      optimizer_->addEdge(dynobst_edge);
      time += teb_.TimeDiff(i); // we do not need to check the time diff bounds, since we iterate to "< sizePoses()-1".
    }
  }
}

void TebOptimalPlanner::AddEdgesViaPoints()
{
  if (cfg_->optim.weight_viapoint==0 || via_points_==NULL || via_points_->empty() )
    return; // if weight equals zero skip adding edges!

  int start_pose_idx = 0;
  
  int n = teb_.sizePoses();
  if (n<3) // we do not have any degrees of freedom for reaching via-points
    return;
  
  for (ViaPointContainer::const_iterator vp_it = via_points_->begin(); vp_it != via_points_->end(); ++vp_it)
  {
    
    int index = teb_.findClosestTrajectoryPose(*vp_it, NULL, start_pose_idx);
    if (cfg_->trajectory.via_points_ordered)
      start_pose_idx = index+2; // skip a point to have a DOF inbetween for further via-points
     
    // check if point conicides with goal or is located behind it
    if ( index > n-2 ) 
      index = n-2; // set to a pose before the goal, since we can move it away!
    // check if point coincides with start or is located before it
    if ( index < 1)
    {
      if (cfg_->trajectory.via_points_ordered)
      {
        index = 1; // try to connect the via point with the second (and non-fixed) pose. It is likely that autoresize adds new poses inbetween later.
      }
      else
      {
        ROS_DEBUG("TebOptimalPlanner::AddEdgesViaPoints(): skipping a via-point that is close or behind the current robot pose.");
        continue; // skip via points really close or behind the current robot pose
      }
    }
    Eigen::Matrix<double,1,1> information;
    information.fill(cfg_->optim.weight_viapoint);
    
    EdgeViaPoint* edge_viapoint = new EdgeViaPoint;
    edge_viapoint->setVertex(0,teb_.PoseVertex(index));
    edge_viapoint->setInformation(information);
    edge_viapoint->setParameters(*cfg_, &(*vp_it));
    optimizer_->addEdge(edge_viapoint);   
  }
}

void TebOptimalPlanner::AddEdgesVelocity()
{
  if (cfg_->robot.max_vel_y == 0) // non-holonomic robot
  {
    if ( cfg_->optim.weight_max_vel_x==0 && cfg_->optim.weight_max_vel_theta==0)
      return; // if weight equals zero skip adding edges!

    int n = teb_.sizePoses();
    Eigen::Matrix<double,2,2> information;
    information(0,0) = cfg_->optim.weight_max_vel_x;
    information(1,1) = cfg_->optim.weight_max_vel_theta;
    information(0,1) = 0.0;
    information(1,0) = 0.0;

    for (int i=0; i < n - 1; ++i)
    {
      EdgeVelocity* velocity_edge = new EdgeVelocity;
      velocity_edge->setVertex(0,teb_.PoseVertex(i));
      velocity_edge->setVertex(1,teb_.PoseVertex(i+1));
      velocity_edge->setVertex(2,teb_.TimeDiffVertex(i));
      velocity_edge->setInformation(information);
      velocity_edge->setTebConfig(*cfg_);
      optimizer_->addEdge(velocity_edge);
    }
  }
  else // holonomic-robot
  {
    if ( cfg_->optim.weight_max_vel_x==0 && cfg_->optim.weight_max_vel_y==0 && cfg_->optim.weight_max_vel_theta==0)
      return; // if weight equals zero skip adding edges!
      
    int n = teb_.sizePoses();
    Eigen::Matrix<double,3,3> information;
    information.fill(0);
    information(0,0) = cfg_->optim.weight_max_vel_x;
    information(1,1) = cfg_->optim.weight_max_vel_y;
    information(2,2) = cfg_->optim.weight_max_vel_theta;

    for (int i=0; i < n - 1; ++i)
    {
      EdgeVelocityHolonomic* velocity_edge = new EdgeVelocityHolonomic;
      velocity_edge->setVertex(0,teb_.PoseVertex(i));
      velocity_edge->setVertex(1,teb_.PoseVertex(i+1));
      velocity_edge->setVertex(2,teb_.TimeDiffVertex(i));
      velocity_edge->setInformation(information);
      velocity_edge->setTebConfig(*cfg_);
      optimizer_->addEdge(velocity_edge);
    } 
    
  }
}

void TebOptimalPlanner::AddEdgesAcceleration()
{
  if (cfg_->optim.weight_acc_lim_x==0  && cfg_->optim.weight_acc_lim_theta==0) 
    return; // if weight equals zero skip adding edges!

  int n = teb_.sizePoses();  
    
  if (cfg_->robot.max_vel_y == 0 || cfg_->robot.acc_lim_y == 0) // non-holonomic robot
  {
    Eigen::Matrix<double,2,2> information;
    information.fill(0);
    information(0,0) = cfg_->optim.weight_acc_lim_x;
    information(1,1) = cfg_->optim.weight_acc_lim_theta;
    
    // check if an initial velocity should be taken into accound
    if (vel_start_.first)
    {
      EdgeAccelerationStart* acceleration_edge = new EdgeAccelerationStart;
      acceleration_edge->setVertex(0,teb_.PoseVertex(0));
      acceleration_edge->setVertex(1,teb_.PoseVertex(1));
      acceleration_edge->setVertex(2,teb_.TimeDiffVertex(0));
      acceleration_edge->setInitialVelocity(vel_start_.second);
      acceleration_edge->setInformation(information);
      acceleration_edge->setTebConfig(*cfg_);
      optimizer_->addEdge(acceleration_edge);
    }

    // now add the usual acceleration edge for each tuple of three teb poses
    for (int i=0; i < n - 2; ++i)
    {
      EdgeAcceleration* acceleration_edge = new EdgeAcceleration;
      acceleration_edge->setVertex(0,teb_.PoseVertex(i));
      acceleration_edge->setVertex(1,teb_.PoseVertex(i+1));
      acceleration_edge->setVertex(2,teb_.PoseVertex(i+2));
      acceleration_edge->setVertex(3,teb_.TimeDiffVertex(i));
      acceleration_edge->setVertex(4,teb_.TimeDiffVertex(i+1));
      acceleration_edge->setInformation(information);
      acceleration_edge->setTebConfig(*cfg_);
      optimizer_->addEdge(acceleration_edge);
    }
    
    // check if a goal velocity should be taken into accound
    if (vel_goal_.first)
    {
      EdgeAccelerationGoal* acceleration_edge = new EdgeAccelerationGoal;
      acceleration_edge->setVertex(0,teb_.PoseVertex(n-2));
      acceleration_edge->setVertex(1,teb_.PoseVertex(n-1));
      acceleration_edge->setVertex(2,teb_.TimeDiffVertex( teb_.sizeTimeDiffs()-1 ));
      acceleration_edge->setGoalVelocity(vel_goal_.second);
      acceleration_edge->setInformation(information);
      acceleration_edge->setTebConfig(*cfg_);
      optimizer_->addEdge(acceleration_edge);
    }  
  }
  else // holonomic robot
  {
    Eigen::Matrix<double,3,3> information;
    information.fill(0);
    information(0,0) = cfg_->optim.weight_acc_lim_x;
    information(1,1) = cfg_->optim.weight_acc_lim_y;
    information(2,2) = cfg_->optim.weight_acc_lim_theta;
    
    // check if an initial velocity should be taken into accound
    if (vel_start_.first)
    {
      EdgeAccelerationHolonomicStart* acceleration_edge = new EdgeAccelerationHolonomicStart;
      acceleration_edge->setVertex(0,teb_.PoseVertex(0));
      acceleration_edge->setVertex(1,teb_.PoseVertex(1));
      acceleration_edge->setVertex(2,teb_.TimeDiffVertex(0));
      acceleration_edge->setInitialVelocity(vel_start_.second);
      acceleration_edge->setInformation(information);
      acceleration_edge->setTebConfig(*cfg_);
      optimizer_->addEdge(acceleration_edge);
    }

    // now add the usual acceleration edge for each tuple of three teb poses
    for (int i=0; i < n - 2; ++i)
    {
      EdgeAccelerationHolonomic* acceleration_edge = new EdgeAccelerationHolonomic;
      acceleration_edge->setVertex(0,teb_.PoseVertex(i));
      acceleration_edge->setVertex(1,teb_.PoseVertex(i+1));
      acceleration_edge->setVertex(2,teb_.PoseVertex(i+2));
      acceleration_edge->setVertex(3,teb_.TimeDiffVertex(i));
      acceleration_edge->setVertex(4,teb_.TimeDiffVertex(i+1));
      acceleration_edge->setInformation(information);
      acceleration_edge->setTebConfig(*cfg_);
      optimizer_->addEdge(acceleration_edge);
    }
    
    // check if a goal velocity should be taken into accound
    if (vel_goal_.first)
    {
      EdgeAccelerationHolonomicGoal* acceleration_edge = new EdgeAccelerationHolonomicGoal;
      acceleration_edge->setVertex(0,teb_.PoseVertex(n-2));
      acceleration_edge->setVertex(1,teb_.PoseVertex(n-1));
      acceleration_edge->setVertex(2,teb_.TimeDiffVertex( teb_.sizeTimeDiffs()-1 ));
      acceleration_edge->setGoalVelocity(vel_goal_.second);
      acceleration_edge->setInformation(information);
      acceleration_edge->setTebConfig(*cfg_);
      optimizer_->addEdge(acceleration_edge);
    }  
  }
}



void TebOptimalPlanner::AddEdgesTimeOptimal()
{
  if (cfg_->optim.weight_optimaltime==0) 
    return; // if weight equals zero skip adding edges!

  Eigen::Matrix<double,1,1> information;
  information.fill(cfg_->optim.weight_optimaltime);

  for (int i=0; i < teb_.sizeTimeDiffs(); ++i)
  {
    EdgeTimeOptimal* timeoptimal_edge = new EdgeTimeOptimal;
    timeoptimal_edge->setVertex(0,teb_.TimeDiffVertex(i));
    timeoptimal_edge->setInformation(information);
    timeoptimal_edge->setTebConfig(*cfg_);
    optimizer_->addEdge(timeoptimal_edge);
  }
}

void TebOptimalPlanner::AddEdgesShortestPath()
{
  if (cfg_->optim.weight_shortest_path==0)
    return; // if weight equals zero skip adding edges!

  Eigen::Matrix<double,1,1> information;
  information.fill(cfg_->optim.weight_shortest_path);

  for (int i=0; i < teb_.sizePoses()-1; ++i)
  {
    EdgeShortestPath* shortest_path_edge = new EdgeShortestPath;
    shortest_path_edge->setVertex(0,teb_.PoseVertex(i));
    shortest_path_edge->setVertex(1,teb_.PoseVertex(i+1));
    shortest_path_edge->setInformation(information);
    shortest_path_edge->setTebConfig(*cfg_);
    optimizer_->addEdge(shortest_path_edge);
  }
}



void TebOptimalPlanner::AddEdgesKinematicsDiffDrive()
{
  if (cfg_->optim.weight_kinematics_nh==0 && cfg_->optim.weight_kinematics_forward_drive==0)
    return; // if weight equals zero skip adding edges!
  
  // create edge for satisfiying kinematic constraints
  Eigen::Matrix<double,2,2> information_kinematics;
  information_kinematics.fill(0.0);
  information_kinematics(0, 0) = cfg_->optim.weight_kinematics_nh;
  information_kinematics(1, 1) = cfg_->optim.weight_kinematics_forward_drive;
  
  for (int i=0; i < teb_.sizePoses()-1; i++) // ignore twiced start only
  {
    EdgeKinematicsDiffDrive* kinematics_edge = new EdgeKinematicsDiffDrive;
    kinematics_edge->setVertex(0,teb_.PoseVertex(i));
    kinematics_edge->setVertex(1,teb_.PoseVertex(i+1));      
    kinematics_edge->setInformation(information_kinematics);
    kinematics_edge->setTebConfig(*cfg_);
    optimizer_->addEdge(kinematics_edge);
  }      
}

void TebOptimalPlanner::AddEdgesKinematicsCarlike()
{
  if (cfg_->optim.weight_kinematics_nh==0 && cfg_->optim.weight_kinematics_turning_radius==0)
    return; // if weight equals zero skip adding edges!

  // create edge for satisfiying kinematic constraints
  Eigen::Matrix<double,2,2> information_kinematics;
  information_kinematics.fill(0.0);
  information_kinematics(0, 0) = cfg_->optim.weight_kinematics_nh;
  information_kinematics(1, 1) = cfg_->optim.weight_kinematics_turning_radius;
  
  for (int i=0; i < teb_.sizePoses()-1; i++) // ignore twiced start only
  {
    EdgeKinematicsCarlike* kinematics_edge = new EdgeKinematicsCarlike;
    kinematics_edge->setVertex(0,teb_.PoseVertex(i));
    kinematics_edge->setVertex(1,teb_.PoseVertex(i+1));      
    kinematics_edge->setInformation(information_kinematics);
    kinematics_edge->setTebConfig(*cfg_);
    optimizer_->addEdge(kinematics_edge);
  }  
}


void TebOptimalPlanner::AddEdgesPreferRotDir()
{
  //TODO(roesmann): Note, these edges can result in odd predictions, in particular
  //                we can observe a substantional mismatch between open- and closed-loop planning
  //                leading to a poor control performance.
  //                At the moment, we keep these functionality for oscillation recovery:
  //                Activating the edge for a short time period might not be crucial and
  //                could move the robot to a new oscillation-free state.
  //                This needs to be analyzed in more detail!
  if (prefer_rotdir_ == RotType::none || cfg_->optim.weight_prefer_rotdir==0)
    return; // if weight equals zero skip adding edges!

  if (prefer_rotdir_ != RotType::right && prefer_rotdir_ != RotType::left)
  {
    ROS_WARN("TebOptimalPlanner::AddEdgesPreferRotDir(): unsupported RotType selected. Skipping edge creation.");
    return;
  }

  // create edge for satisfiying kinematic constraints
  Eigen::Matrix<double,1,1> information_rotdir;
  information_rotdir.fill(cfg_->optim.weight_prefer_rotdir);
  
  for (int i=0; i < teb_.sizePoses()-1 && i < 3; ++i) // currently: apply to first 3 rotations
  {
    EdgePreferRotDir* rotdir_edge = new EdgePreferRotDir;
    rotdir_edge->setVertex(0,teb_.PoseVertex(i));
    rotdir_edge->setVertex(1,teb_.PoseVertex(i+1));      
    rotdir_edge->setInformation(information_rotdir);
    
    if (prefer_rotdir_ == RotType::left)
        rotdir_edge->preferLeft();
    else if (prefer_rotdir_ == RotType::right)
        rotdir_edge->preferRight();
    
    optimizer_->addEdge(rotdir_edge);
  }
}

void TebOptimalPlanner::computeCurrentCost(double obst_cost_scale, double viapoint_cost_scale, bool alternative_time_cost)
{ 
  // check if graph is empty/exist  -> important if function is called between buildGraph and optimizeGraph/clearGraph
  bool graph_exist_flag(false);
  if (optimizer_->edges().empty() && optimizer_->vertices().empty())
  {
    // here the graph is build again, for time efficiency make sure to call this function 
    // between buildGraph and Optimize (deleted), but it depends on the application
    buildGraph();       
    optimizer_->initializeOptimization();
  }
  else
  {
    graph_exist_flag = true;
  }
  
  optimizer_->computeInitialGuess();
  
  cost_ = 0;

  if (alternative_time_cost)
  {
    cost_ += teb_.getSumOfAllTimeDiffs();
    // TEST we use SumOfAllTimeDiffs() here, because edge cost depends on number of samples, which is not always the same for similar TEBs,
    // since we are using an AutoResize Function with hysteresis.
  }
  
  // now we need pointers to all edges -> calculate error for each edge-type
  // since we aren't storing edge pointers, we need to check every edge
  for (std::vector<g2o::OptimizableGraph::Edge*>::const_iterator it = optimizer_->activeEdges().begin(); it!= optimizer_->activeEdges().end(); it++)
  {
    double cur_cost = (*it)->chi2();

    if (dynamic_cast<EdgeObstacle*>(*it) != nullptr
        || dynamic_cast<EdgeInflatedObstacle*>(*it) != nullptr
        || dynamic_cast<EdgeDynamicObstacle*>(*it) != nullptr)
    {
      cur_cost *= obst_cost_scale;
    }
    else if (dynamic_cast<EdgeViaPoint*>(*it) != nullptr)
    {
      cur_cost *= viapoint_cost_scale;
    }
    else if (dynamic_cast<EdgeTimeOptimal*>(*it) != nullptr && alternative_time_cost)
    {
      continue; // skip these edges if alternative_time_cost is active
    }
    cost_ += cur_cost;
  }

  // delete temporary created graph
  if (!graph_exist_flag) 
    clearGraph();
}


void TebOptimalPlanner::extractVelocity(const PoseSE2& pose1, const PoseSE2& pose2, double dt, double& vx, double& vy, double& omega) const
{
  if (dt == 0)
  {
    vx = 0;
    vy = 0;
    omega = 0;
    return;
  }
  
  Eigen::Vector2d deltaS = pose2.position() - pose1.position();
  
  if (cfg_->robot.max_vel_y == 0) // nonholonomic robot
  {
    Eigen::Vector2d conf1dir( cos(pose1.theta()), sin(pose1.theta()) );
    // translational velocity
    double dir = deltaS.dot(conf1dir);
    vx = (double) g2o::sign(dir) * deltaS.norm()/dt;
    vy = 0;
  }
  else // holonomic robot
  {
    // transform pose 2 into the current robot frame (pose1)
    // for velocities only the rotation of the direction vector is necessary.
    // (map->pose1-frame: inverse 2d rotation matrix)
    double cos_theta1 = std::cos(pose1.theta());
    double sin_theta1 = std::sin(pose1.theta());
    double p1_dx =  cos_theta1*deltaS.x() + sin_theta1*deltaS.y();
    double p1_dy = -sin_theta1*deltaS.x() + cos_theta1*deltaS.y();
    vx = p1_dx / dt;
    vy = p1_dy / dt;    
  }
  
  // rotational velocity
  double orientdiff = g2o::normalize_theta(pose2.theta() - pose1.theta());
  omega = orientdiff/dt;
}

bool TebOptimalPlanner::getVelocityCommand(double& vx, double& vy, double& omega, int look_ahead_poses) const
{
  if (teb_.sizePoses()<2)
  {
    ROS_ERROR("TebOptimalPlanner::getVelocityCommand(): The trajectory contains less than 2 poses. Make sure to init and optimize/plan the trajectory fist.");
    vx = 0;
    vy = 0;
    omega = 0;
    return false;
  }
  look_ahead_poses = std::max(1, std::min(look_ahead_poses, teb_.sizePoses() - 1));
  double dt = 0.0;
  for(int counter = 0; counter < look_ahead_poses; ++counter)
  {
    dt += teb_.TimeDiff(counter);
    if(dt >= cfg_->trajectory.dt_ref * look_ahead_poses)  // TODO: change to look-ahead time? Refine trajectory?
    {
        look_ahead_poses = counter + 1;
        break;
    }
  }
  if (dt<=0)
  {     
    ROS_ERROR("TebOptimalPlanner::getVelocityCommand() - timediff<=0 is invalid!");
    vx = 0;
    vy = 0;
    omega = 0;
    return false;
  }
          
  // Get velocity from the first two configurations
  extractVelocity(teb_.Pose(0), teb_.Pose(look_ahead_poses), dt, vx, vy, omega);
  return true;
}

void TebOptimalPlanner::getVelocityProfile(std::vector<geometry_msgs::Twist>& velocity_profile) const
{
  int n = teb_.sizePoses();
  velocity_profile.resize( n+1 );

  // start velocity 
  velocity_profile.front().linear.z = 0;
  velocity_profile.front().angular.x = velocity_profile.front().angular.y = 0;  
  velocity_profile.front().linear.x = vel_start_.second.linear.x;
  velocity_profile.front().linear.y = vel_start_.second.linear.y;
  velocity_profile.front().angular.z = vel_start_.second.angular.z;
  
  for (int i=1; i<n; ++i)
  {
    velocity_profile[i].linear.z = 0;
    velocity_profile[i].angular.x = velocity_profile[i].angular.y = 0;
    extractVelocity(teb_.Pose(i-1), teb_.Pose(i), teb_.TimeDiff(i-1), velocity_profile[i].linear.x, velocity_profile[i].linear.y, velocity_profile[i].angular.z);
  }
  
  // goal velocity
  velocity_profile.back().linear.z = 0;
  velocity_profile.back().angular.x = velocity_profile.back().angular.y = 0;  
  velocity_profile.back().linear.x = vel_goal_.second.linear.x;
  velocity_profile.back().linear.y = vel_goal_.second.linear.y;
  velocity_profile.back().angular.z = vel_goal_.second.angular.z;
}

void TebOptimalPlanner::getFullTrajectory(std::vector<TrajectoryPointMsg>& trajectory) const
{
  int n = teb_.sizePoses();
  
  trajectory.resize(n);
  
  if (n == 0)
    return;
     
  double curr_time = 0;
  
  // start
  TrajectoryPointMsg& start = trajectory.front();
  teb_.Pose(0).toPoseMsg(start.pose);
  start.velocity.linear.z = 0;
  start.velocity.angular.x = start.velocity.angular.y = 0;
  start.velocity.linear.x = vel_start_.second.linear.x;
  start.velocity.linear.y = vel_start_.second.linear.y;
  start.velocity.angular.z = vel_start_.second.angular.z;
  start.time_from_start.fromSec(curr_time);
  
  curr_time += teb_.TimeDiff(0);
  
  // intermediate points
  for (int i=1; i < n-1; ++i)
  {
    TrajectoryPointMsg& point = trajectory[i];
    teb_.Pose(i).toPoseMsg(point.pose);
    point.velocity.linear.z = 0;
    point.velocity.angular.x = point.velocity.angular.y = 0;
    double vel1_x, vel1_y, vel2_x, vel2_y, omega1, omega2;
    extractVelocity(teb_.Pose(i-1), teb_.Pose(i), teb_.TimeDiff(i-1), vel1_x, vel1_y, omega1);
    extractVelocity(teb_.Pose(i), teb_.Pose(i+1), teb_.TimeDiff(i), vel2_x, vel2_y, omega2);
    point.velocity.linear.x = 0.5*(vel1_x+vel2_x);
    point.velocity.linear.y = 0.5*(vel1_y+vel2_y);
    point.velocity.angular.z = 0.5*(omega1+omega2);    
    point.time_from_start.fromSec(curr_time);
    
    curr_time += teb_.TimeDiff(i);
  }
  
  // goal
  TrajectoryPointMsg& goal = trajectory.back();
  teb_.BackPose().toPoseMsg(goal.pose);
  goal.velocity.linear.z = 0;
  goal.velocity.angular.x = goal.velocity.angular.y = 0;
  goal.velocity.linear.x = vel_goal_.second.linear.x;
  goal.velocity.linear.y = vel_goal_.second.linear.y;
  goal.velocity.angular.z = vel_goal_.second.angular.z;
  goal.time_from_start.fromSec(curr_time);
}


bool TebOptimalPlanner::isTrajectoryFeasible(base_local_planner::CostmapModel* costmap_model, const std::vector<geometry_msgs::Point>& footprint_spec,
                                             double inscribed_radius, double circumscribed_radius, int look_ahead_idx)
{
  if (look_ahead_idx < 0 || look_ahead_idx >= teb().sizePoses())
    look_ahead_idx = teb().sizePoses() - 1;
  
  for (int i=0; i <= look_ahead_idx; ++i)
  {           
    if ( costmap_model->footprintCost(teb().Pose(i).x(), teb().Pose(i).y(), teb().Pose(i).theta(), footprint_spec, inscribed_radius, circumscribed_radius) < 0 )
    {
      if (visualization_)
      {
        visualization_->publishInfeasibleRobotPose(teb().Pose(i), *robot_model_);
      }
      return false;
    }
    // Checks if the distance between two poses is higher than the robot radius or the orientation diff is bigger than the specified threshold
    // and interpolates in that case.
    // (if obstacles are pushing two consecutive poses away, the center between two consecutive poses might coincide with the obstacle ;-)!
    if (i<look_ahead_idx)
    {
      double delta_rot = g2o::normalize_theta(g2o::normalize_theta(teb().Pose(i+1).theta()) -
                                              g2o::normalize_theta(teb().Pose(i).theta()));
      Eigen::Vector2d delta_dist = teb().Pose(i+1).position()-teb().Pose(i).position();
      if(fabs(delta_rot) > cfg_->trajectory.min_resolution_collision_check_angular || delta_dist.norm() > inscribed_radius)
      {
        int n_additional_samples = std::max(std::ceil(fabs(delta_rot) / cfg_->trajectory.min_resolution_collision_check_angular), 
                                            std::ceil(delta_dist.norm() / inscribed_radius)) - 1;
        PoseSE2 intermediate_pose = teb().Pose(i);
        for(int step = 0; step < n_additional_samples; ++step)
        {
          intermediate_pose.position() = intermediate_pose.position() + delta_dist / (n_additional_samples + 1.0);
          intermediate_pose.theta() = g2o::normalize_theta(intermediate_pose.theta() + 
                                                           delta_rot / (n_additional_samples + 1.0));
          if ( costmap_model->footprintCost(intermediate_pose.x(), intermediate_pose.y(), intermediate_pose.theta(),
            footprint_spec, inscribed_radius, circumscribed_radius) == -1 )
          {
            if (visualization_) 
            {
              visualization_->publishInfeasibleRobotPose(intermediate_pose, *robot_model_);
            }
            return false;
          }
        }
      }
    }
  }
  return true;
}

} // namespace teb_local_planner