programs/io.c
Go to the documentation of this file.
1 /*
2  * Copyright 1997, Regents of the University of Minnesota
3  *
4  * io.c
5  *
6  * This file contains routines related to I/O
7  *
8  * Started 8/28/94
9  * George
10  *
11  * $Id: io.c 11932 2012-05-10 18:18:23Z dominique $
12  *
13  */
14 
15 #include "metisbin.h"
16 
17 
18 
19 /*************************************************************************/
21 /*************************************************************************/
23 {
24  idx_t i, j, k, l, fmt, ncon, nfields, readew, readvw, readvs, edge, ewgt;
25  idx_t *xadj, *adjncy, *vwgt, *adjwgt, *vsize;
26  char *line=NULL, fmtstr[256], *curstr, *newstr;
27  size_t lnlen=0;
28  FILE *fpin;
29  graph_t *graph;
30 
31  if (!gk_fexists(params->filename))
32  errexit("File %s does not exist!\n", params->filename);
33 
34  graph = CreateGraph();
35 
36  fpin = gk_fopen(params->filename, "r", "ReadGRaph: Graph");
37 
38  /* Skip comment lines until you get to the first valid line */
39  do {
40  if (gk_getline(&line, &lnlen, fpin) == -1)
41  errexit("Premature end of input file: file: %s\n", params->filename);
42  } while (line[0] == '%');
43 
44 
45  fmt = ncon = 0;
46  nfields = sscanf(line, "%"SCIDX" %"SCIDX" %"SCIDX" %"SCIDX,
47  &(graph->nvtxs), &(graph->nedges), &fmt, &ncon);
48 
49  if (nfields < 2)
50  errexit("The input file does not specify the number of vertices and edges.\n");
51 
52  if (graph->nvtxs <= 0 || graph->nedges <= 0)
53  errexit("The supplied nvtxs:%"PRIDX" and nedges:%"PRIDX" must be positive.\n",
54  graph->nvtxs, graph->nedges);
55 
56  if (fmt > 111)
57  errexit("Cannot read this type of file format [fmt=%"PRIDX"]!\n", fmt);
58 
59  sprintf(fmtstr, "%03"PRIDX, fmt%1000);
60  readvs = (fmtstr[0] == '1');
61  readvw = (fmtstr[1] == '1');
62  readew = (fmtstr[2] == '1');
63 
64  /*printf("%s %"PRIDX" %"PRIDX" %"PRIDX"\n", fmtstr, readvs, readvw, readew); */
65 
66 
67  if (ncon > 0 && !readvw)
68  errexit(
69  "------------------------------------------------------------------------------\n"
70  "*** I detected an error in your input file ***\n\n"
71  "You specified ncon=%"PRIDX", but the fmt parameter does not specify vertex weights\n"
72  "Make sure that the fmt parameter is set to either 10 or 11.\n"
73  "------------------------------------------------------------------------------\n", ncon);
74 
75  graph->nedges *=2;
76  ncon = graph->ncon = (ncon == 0 ? 1 : ncon);
77 
78  xadj = graph->xadj = ismalloc(graph->nvtxs+1, 0, "ReadGraph: xadj");
79  adjncy = graph->adjncy = imalloc(graph->nedges, "ReadGraph: adjncy");
80  vwgt = graph->vwgt = ismalloc(ncon*graph->nvtxs, 1, "ReadGraph: vwgt");
81  adjwgt = graph->adjwgt = ismalloc(graph->nedges, 1, "ReadGraph: adjwgt");
82  vsize = graph->vsize = ismalloc(graph->nvtxs, 1, "ReadGraph: vsize");
83 
84 
85  /*----------------------------------------------------------------------
86  * Read the sparse graph file
87  *---------------------------------------------------------------------*/
88  for (xadj[0]=0, k=0, i=0; i<graph->nvtxs; i++) {
89  do {
90  if (gk_getline(&line, &lnlen, fpin) == -1)
91  errexit("Premature end of input file while reading vertex %"PRIDX".\n", i+1);
92  } while (line[0] == '%');
93 
94  curstr = line;
95  newstr = NULL;
96 
97  /* Read vertex sizes */
98  if (readvs) {
99  vsize[i] = strtoidx(curstr, &newstr, 10);
100  if (newstr == curstr)
101  errexit("The line for vertex %"PRIDX" does not have vsize information\n", i+1);
102  if (vsize[i] < 0)
103  errexit("The size for vertex %"PRIDX" must be >= 0\n", i+1);
104  curstr = newstr;
105  }
106 
107 
108  /* Read vertex weights */
109  if (readvw) {
110  for (l=0; l<ncon; l++) {
111  vwgt[i*ncon+l] = strtoidx(curstr, &newstr, 10);
112  if (newstr == curstr)
113  errexit("The line for vertex %"PRIDX" does not have enough weights "
114  "for the %"PRIDX" constraints.\n", i+1, ncon);
115  if (vwgt[i*ncon+l] < 0)
116  errexit("The weight vertex %"PRIDX" and constraint %"PRIDX" must be >= 0\n", i+1, l);
117  curstr = newstr;
118  }
119  }
120 
121  while (1) {
122  edge = strtoidx(curstr, &newstr, 10);
123  if (newstr == curstr)
124  break; /* End of line */
125  curstr = newstr;
126 
127  if (edge < 1 || edge > graph->nvtxs)
128  errexit("Edge %"PRIDX" for vertex %"PRIDX" is out of bounds\n", edge, i+1);
129 
130  ewgt = 1;
131  if (readew) {
132  ewgt = strtoidx(curstr, &newstr, 10);
133  if (newstr == curstr)
134  errexit("Premature end of line for vertex %"PRIDX"\n", i+1);
135  if (ewgt <= 0)
136  errexit("The weight (%"PRIDX") for edge (%"PRIDX", %"PRIDX") must be positive.\n",
137  ewgt, i+1, edge);
138  curstr = newstr;
139  }
140 
141  if (k == graph->nedges)
142  errexit("There are more edges in the file than the %"PRIDX" specified.\n",
143  graph->nedges/2);
144 
145  adjncy[k] = edge-1;
146  adjwgt[k] = ewgt;
147  k++;
148  }
149  xadj[i+1] = k;
150  }
151  gk_fclose(fpin);
152 
153  if (k != graph->nedges) {
154  printf("------------------------------------------------------------------------------\n");
155  printf("*** I detected an error in your input file ***\n\n");
156  printf("In the first line of the file, you specified that the graph contained\n"
157  "%"PRIDX" edges. However, I only found %"PRIDX" edges in the file.\n",
158  graph->nedges/2, k/2);
159  if (2*k == graph->nedges) {
160  printf("\n *> I detected that you specified twice the number of edges that you have in\n");
161  printf(" the file. Remember that the number of edges specified in the first line\n");
162  printf(" counts each edge between vertices v and u only once.\n\n");
163  }
164  printf("Please specify the correct number of edges in the first line of the file.\n");
165  printf("------------------------------------------------------------------------------\n");
166  exit(0);
167  }
168 
169  gk_free((void *)&line, LTERM);
170 
171  return graph;
172 }
173 
174 
175 /*************************************************************************/
177 /*************************************************************************/
179 {
180  idx_t i, j, k, l, nfields, ncon, node;
181  idx_t *eptr, *eind, *ewgt;
182  size_t nlines, ntokens;
183  char *line=NULL, *curstr, *newstr;
184  size_t lnlen=0;
185  FILE *fpin;
186  mesh_t *mesh;
187 
188  if (!gk_fexists(params->filename))
189  errexit("File %s does not exist!\n", params->filename);
190 
191  mesh = CreateMesh();
192 
193  /* get some file stats */
194  gk_getfilestats(params->filename, &nlines, &ntokens, NULL, NULL);
195 
196  fpin = gk_fopen(params->filename, "r", __func__);
197 
198  /* Skip comment lines until you get to the first valid line */
199  do {
200  if (gk_getline(&line, &lnlen, fpin) == -1)
201  errexit("Premature end of input file: file: %s\n", params->filename);
202  } while (line[0] == '%');
203 
204 
205  mesh->ncon = 0;
206  nfields = sscanf(line, "%"SCIDX" %"SCIDX, &(mesh->ne), &(mesh->ncon));
207 
208  if (nfields < 1)
209  errexit("The input file does not specify the number of elements.\n");
210 
211  if (mesh->ne <= 0)
212  errexit("The supplied number of elements:%"PRIDX" must be positive.\n", mesh->ne);
213 
214  if (mesh->ne > nlines)
215  errexit("The file has %zu lines which smaller than the number of "
216  "elements of %"PRIDX" specified in the header line.\n", nlines, mesh->ne);
217 
218  ncon = mesh->ncon;
219  eptr = mesh->eptr = ismalloc(mesh->ne+1, 0, "ReadMesh: eptr");
220  eind = mesh->eind = imalloc(ntokens, "ReadMesh: eind");
221  ewgt = mesh->ewgt = ismalloc((ncon == 0 ? 1 : ncon)*mesh->ne, 1, "ReadMesh: ewgt");
222 
223 
224  /*----------------------------------------------------------------------
225  * Read the mesh file
226  *---------------------------------------------------------------------*/
227  for (eptr[0]=0, k=0, i=0; i<mesh->ne; i++) {
228  do {
229  if (gk_getline(&line, &lnlen, fpin) == -1)
230  errexit("Premature end of input file while reading element %"PRIDX".\n", i+1);
231  } while (line[0] == '%');
232 
233  curstr = line;
234  newstr = NULL;
235 
236  /* Read element weights */
237  for (l=0; l<ncon; l++) {
238  ewgt[i*ncon+l] = strtoidx(curstr, &newstr, 10);
239  if (newstr == curstr)
240  errexit("The line for vertex %"PRIDX" does not have enough weights "
241  "for the %"PRIDX" constraints.\n", i+1, ncon);
242  if (ewgt[i*ncon+l] < 0)
243  errexit("The weight for element %"PRIDX" and constraint %"PRIDX" must be >= 0\n", i+1, l);
244  curstr = newstr;
245  }
246 
247  while (1) {
248  node = strtoidx(curstr, &newstr, 10);
249  if (newstr == curstr)
250  break; /* End of line */
251  curstr = newstr;
252 
253  if (node < 1)
254  errexit("Node %"PRIDX" for element %"PRIDX" is out of bounds\n", node, i+1);
255 
256  eind[k++] = node-1;
257  }
258  eptr[i+1] = k;
259  }
260  gk_fclose(fpin);
261 
262  mesh->ncon = (ncon == 0 ? 1 : ncon);
263  mesh->nn = imax(eptr[mesh->ne], eind)+1;
264 
265  gk_free((void *)&line, LTERM);
266 
267  return mesh;
268 }
269 
270 
271 /*************************************************************************/
274 /*************************************************************************/
276 {
277  idx_t i, j, from, to, fromcnum, tocnum, nleft;
278  real_t awgt=0.0, twgt;
279  char *line=NULL, *curstr, *newstr;
280  size_t lnlen=0;
281  FILE *fpin;
282 
283  params->tpwgts = rsmalloc(params->nparts*ncon, -1.0, "ReadTPwgts: tpwgts");
284 
285  if (params->tpwgtsfile == NULL) {
286  for (i=0; i<params->nparts; i++) {
287  for (j=0; j<ncon; j++)
288  params->tpwgts[i*ncon+j] = 1.0/params->nparts;
289  }
290  return;
291  }
292 
293  if (!gk_fexists(params->tpwgtsfile))
294  errexit("Graph file %s does not exist!\n", params->tpwgtsfile);
295 
296  fpin = gk_fopen(params->tpwgtsfile, "r", "ReadTPwgts: tpwgtsfile");
297 
298  while (gk_getline(&line, &lnlen, fpin) != -1) {
299  gk_strchr_replace(line, " ", "");
300  /* start extracting the fields */
301 
302  curstr = line;
303  newstr = NULL;
304 
305  from = strtoidx(curstr, &newstr, 10);
306  if (newstr == curstr)
307  errexit("The 'from' component of line <%s> in the tpwgts file is incorrect.\n", line);
308  curstr = newstr;
309 
310  if (curstr[0] == '-') {
311  to = strtoidx(curstr+1, &newstr, 10);
312  if (newstr == curstr)
313  errexit("The 'to' component of line <%s> in the tpwgts file is incorrect.\n", line);
314  curstr = newstr;
315  }
316  else {
317  to = from;
318  }
319 
320  if (curstr[0] == ':') {
321  fromcnum = strtoidx(curstr+1, &newstr, 10);
322  if (newstr == curstr)
323  errexit("The 'fromcnum' component of line <%s> in the tpwgts file is incorrect.\n", line);
324  curstr = newstr;
325 
326  if (curstr[0] == '-') {
327  tocnum = strtoidx(curstr+1, &newstr, 10);
328  if (newstr == curstr)
329  errexit("The 'tocnum' component of line <%s> in the tpwgts file is incorrect.\n", line);
330  curstr = newstr;
331  }
332  else {
333  tocnum = fromcnum;
334  }
335  }
336  else {
337  fromcnum = 0;
338  tocnum = ncon-1;
339  }
340 
341  if (curstr[0] == '=') {
342  awgt = strtoreal(curstr+1, &newstr);
343  if (newstr == curstr)
344  errexit("The 'wgt' component of line <%s> in the tpwgts file is incorrect.\n", line);
345  curstr = newstr;
346  }
347  else {
348  errexit("The 'wgt' component of line <%s> in the tpwgts file is missing.\n", line);
349  }
350 
351  /*printf("Read: %"PRIDX"-%"PRIDX":%"PRIDX"-%"PRIDX"=%"PRREAL"\n",
352  from, to, fromcnum, tocnum, awgt);*/
353 
354  if (from < 0 || to < 0 || from >= params->nparts || to >= params->nparts)
355  errexit("Invalid partition range for %"PRIDX":%"PRIDX"\n", from, to);
356  if (fromcnum < 0 || tocnum < 0 || fromcnum >= ncon || tocnum >= ncon)
357  errexit("Invalid constraint number range for %"PRIDX":%"PRIDX"\n",
358  fromcnum, tocnum);
359  if (awgt <= 0.0 || awgt >= 1.0)
360  errexit("Invalid partition weight of %"PRREAL"\n", awgt);
361  for (i=from; i<=to; i++) {
362  for (j=fromcnum; j<=tocnum; j++)
363  params->tpwgts[i*ncon+j] = awgt;
364  }
365  }
366 
367  gk_fclose(fpin);
368 
369  /* Assign weight to the unspecified constraints x partitions */
370  for (j=0; j<ncon; j++) {
371  /* Sum up the specified weights for the jth constraint */
372  for (twgt=0.0, nleft=params->nparts, i=0; i<params->nparts; i++) {
373  if (params->tpwgts[i*ncon+j] > 0) {
374  twgt += params->tpwgts[i*ncon+j];
375  nleft--;
376  }
377  }
378 
379  /* Rescale the weights to be on the safe side */
380  if (nleft == 0)
381  rscale(params->nparts, 1.0/twgt, params->tpwgts+j, ncon);
382 
383  /* Assign the left-over weight to the remaining partitions */
384  if (nleft > 0) {
385  if (twgt > 1)
386  errexit("The total specified target partition weights for constraint #%"PRIDX
387  " of %"PRREAL" exceeds 1.0.\n", j, twgt);
388 
389  awgt = (1.0 - twgt)/nleft;
390  for (i=0; i<params->nparts; i++)
391  params->tpwgts[i*ncon+j] =
392  (params->tpwgts[i*ncon+j] < 0 ? awgt : params->tpwgts[i*ncon+j]);
393  }
394  }
395  #ifdef HAVE_GETLINE
396  free(line);
397  line = NULL; /* set to null to match behavior of gk_free() */
398  #else
399  gk_free((void *)&line, LTERM);
400  #endif
401 }
402 
403 
404 /*************************************************************************/
406 /**************************************************************************/
407 void ReadPOVector(graph_t *graph, char *filename, idx_t *vector)
408 {
409  idx_t i;
410  FILE *fpin;
411 
412  fpin = gk_fopen(filename, "r", __func__);
413  for (i=0; i<graph->nvtxs; i++) {
414  if (fscanf(fpin, "%"SCIDX"\n", vector+i) != 1)
415  errexit("[%s] Premature end of file %s at line %d [nvtxs: %d]\n",
416  __func__, filename, i, graph->nvtxs);
417  }
418  gk_fclose(fpin);
419 }
420 
421 
422 /*************************************************************************/
424 /*************************************************************************/
425 void WritePartition(char *fname, idx_t *part, idx_t n, idx_t nparts)
426 {
427  FILE *fpout;
428  idx_t i;
429  char filename[MAXLINE];
430 
431  sprintf(filename, "%s.part.%"PRIDX, fname, nparts);
432 
433  fpout = gk_fopen(filename, "w", __func__);
434 
435  for (i=0; i<n; i++)
436  fprintf(fpout,"%" PRIDX "\n", part[i]);
437 
438  gk_fclose(fpout);
439 }
440 
441 
442 /*************************************************************************/
444 /*************************************************************************/
445 void WriteMeshPartition(char *fname, idx_t nparts, idx_t ne, idx_t *epart,
446  idx_t nn, idx_t *npart)
447 {
448  FILE *fpout;
449  idx_t i;
450  char filename[256];
451 
452  sprintf(filename,"%s.epart.%"PRIDX,fname, nparts);
453 
454  fpout = gk_fopen(filename, "w", __func__);
455 
456  for (i=0; i<ne; i++)
457  fprintf(fpout,"%" PRIDX "\n", epart[i]);
458 
459  gk_fclose(fpout);
460 
461 
462  sprintf(filename,"%s.npart.%"PRIDX,fname, nparts);
463 
464  fpout = gk_fopen(filename, "w", __func__);
465 
466  for (i=0; i<nn; i++)
467  fprintf(fpout, "%" PRIDX "\n", npart[i]);
468 
469  gk_fclose(fpout);
470 
471 }
472 
473 
474 /*************************************************************************/
476 /*************************************************************************/
477 void WritePermutation(char *fname, idx_t *iperm, idx_t n)
478 {
479  FILE *fpout;
480  idx_t i;
481  char filename[MAXLINE];
482 
483  sprintf(filename, "%s.iperm", fname);
484 
485  fpout = gk_fopen(filename, "w", __func__);
486 
487  for (i=0; i<n; i++)
488  fprintf(fpout, "%" PRIDX "\n", iperm[i]);
489 
490  gk_fclose(fpout);
491 }
492 
493 
494 /*************************************************************************/
496 /*************************************************************************/
498 {
499  idx_t i, j, nvtxs, ncon;
500  idx_t *xadj, *adjncy, *adjwgt, *vwgt, *vsize;
501  int hasvwgt=0, hasewgt=0, hasvsize=0;
502  FILE *fpout;
503 
504  nvtxs = graph->nvtxs;
505  ncon = graph->ncon;
506  xadj = graph->xadj;
507  adjncy = graph->adjncy;
508  vwgt = graph->vwgt;
509  vsize = graph->vsize;
510  adjwgt = graph->adjwgt;
511 
512  /* determine if the graph has non-unity vwgt, vsize, or adjwgt */
513  if (vwgt) {
514  for (i=0; i<nvtxs*ncon; i++) {
515  if (vwgt[i] != 1) {
516  hasvwgt = 1;
517  break;
518  }
519  }
520  }
521  if (vsize) {
522  for (i=0; i<nvtxs; i++) {
523  if (vsize[i] != 1) {
524  hasvsize = 1;
525  break;
526  }
527  }
528  }
529  if (adjwgt) {
530  for (i=0; i<xadj[nvtxs]; i++) {
531  if (adjwgt[i] != 1) {
532  hasewgt = 1;
533  break;
534  }
535  }
536  }
537 
538  fpout = gk_fopen(filename, "w", __func__);
539 
540  /* write the header line */
541  fprintf(fpout, "%"PRIDX" %"PRIDX, nvtxs, xadj[nvtxs]/2);
542  if (hasvwgt || hasvsize || hasewgt) {
543  fprintf(fpout, " %d%d%d", hasvsize, hasvwgt, hasewgt);
544  if (hasvwgt)
545  fprintf(fpout, " %d", (int)graph->ncon);
546  }
547 
548 
549  /* write the rest of the graph */
550  for (i=0; i<nvtxs; i++) {
551  fprintf(fpout, "\n");
552  if (hasvsize)
553  fprintf(fpout, " %"PRIDX, vsize[i]);
554 
555  if (hasvwgt) {
556  for (j=0; j<ncon; j++)
557  fprintf(fpout, " %"PRIDX, vwgt[i*ncon+j]);
558  }
559 
560  for (j=xadj[i]; j<xadj[i+1]; j++) {
561  fprintf(fpout, " %"PRIDX, adjncy[j]+1);
562  if (hasewgt)
563  fprintf(fpout, " %"PRIDX, adjwgt[j]);
564  }
565  }
566 
567  gk_fclose(fpout);
568 }
WritePermutation
void WritePermutation(char *fname, idx_t *iperm, idx_t n)
Definition: programs/io.c:477
MAXLINE
#define MAXLINE
Definition: libmetis/defs.h:19
WriteGraph
void WriteGraph(graph_t *graph, char *filename)
Definition: programs/io.c:497
strtoreal
#define strtoreal
Definition: include/metis.h:146
adjwgt
idx_t idx_t idx_t idx_t idx_t idx_t * adjwgt
Definition: include/metis.h:198
CreateGraph
#define CreateGraph
Definition: rename.h:95
gk_free
void gk_free(void **ptr1,...)
Definition: memory.c:202
mesh_t
Definition: libmetis/struct.h:126
vsize
idx_t idx_t idx_t idx_t idx_t * vsize
Definition: include/metis.h:198
rsmalloc
#define rsmalloc
Definition: gklib_rename.h:114
mesh_t::eptr
idx_t * eptr
Definition: libmetis/struct.h:130
adjncy
idx_t idx_t idx_t * adjncy
Definition: include/metis.h:198
rscale
#define rscale
Definition: gklib_rename.h:112
imalloc
#define imalloc
Definition: gklib_rename.h:42
errexit
void errexit(char *f_str,...)
Definition: error.c:53
gk_fopen
FILE * gk_fopen(char *, char *, const char *)
Definition: GKlib/io.c:24
params_t
Definition: fis.c:15
gk_fclose
void gk_fclose(FILE *)
Definition: GKlib/io.c:44
WriteMeshPartition
void WriteMeshPartition(char *fname, idx_t nparts, idx_t ne, idx_t *epart, idx_t nn, idx_t *npart)
Definition: programs/io.c:445
PRREAL
#define PRREAL
Definition: include/metis.h:135
vanilla::params
static const SmartProjectionParams params
Definition: smartFactorScenarios.h:69
ReadGraph
graph_t * ReadGraph(params_t *params)
Definition: programs/io.c:22
npart
idx_t idx_t idx_t idx_t idx_t idx_t real_t idx_t idx_t idx_t idx_t * npart
Definition: include/metis.h:215
gk_strchr_replace
char * gk_strchr_replace(char *str, char *fromlist, char *tolist)
Replaces certain characters in a string.
Definition: string.c:37
ismalloc
#define ismalloc
Definition: gklib_rename.h:68
n
int n
Definition: BiCGSTAB_simple.cpp:1
strtoidx
#define strtoidx
Definition: include/metis.h:109
ncon
idx_t * ncon
Definition: include/metis.h:197
nparts
idx_t idx_t idx_t idx_t idx_t idx_t idx_t * nparts
Definition: include/metis.h:199
iperm
idx_t idx_t idx_t idx_t idx_t idx_t * iperm
Definition: include/metis.h:223
j
std::ptrdiff_t j
Definition: tut_arithmetic_redux_minmax.cpp:2
relicense.filename
filename
Definition: relicense.py:57
metisbin.h
l
static const Line3 l(Rot3(), 1, 1)
LTERM
#define LTERM
Definition: gk_defs.h:14
ReadPOVector
void ReadPOVector(graph_t *graph, char *filename, idx_t *vector)
Definition: programs/io.c:407
eind
idx_t idx_t idx_t * eind
Definition: include/metis.h:207
gk_getfilestats
void gk_getfilestats(char *fname, size_t *r_nlines, size_t *r_ntokens, size_t *r_max_nlntokens, size_t *r_nbytes)
Definition: fs.c:79
vwgt
idx_t idx_t idx_t idx_t * vwgt
Definition: include/metis.h:198
part
idx_t idx_t idx_t idx_t idx_t idx_t idx_t real_t real_t idx_t idx_t idx_t * part
Definition: include/metis.h:200
ReadTPwgts
void ReadTPwgts(params_t *params, idx_t ncon)
Definition: programs/io.c:275
eptr
idx_t idx_t * eptr
Definition: include/metis.h:207
xadj
idx_t idx_t * xadj
Definition: include/metis.h:197
gk_fexists
int gk_fexists(char *fname)
Definition: fs.c:21
epart
idx_t idx_t idx_t idx_t idx_t idx_t real_t idx_t idx_t idx_t * epart
Definition: include/metis.h:215
mesh_t::eind
idx_t * eind
Definition: libmetis/struct.h:130
PRIDX
#define PRIDX
Definition: include/metis.h:107
real_t
float real_t
Definition: include/metis.h:132
mesh_t::ncon
idx_t ncon
Definition: libmetis/struct.h:128
NULL
#define NULL
Definition: ccolamd.c:609
CreateMesh
#define CreateMesh
Definition: rename.h:153
gk_getline
gk_idx_t gk_getline(char **lineptr, size_t *n, FILE *stream)
Definition: GKlib/io.c:57
graph
NonlinearFactorGraph graph
Definition: doc/Code/OdometryExample.cpp:2
mesh_t::ewgt
idx_t * ewgt
Definition: libmetis/struct.h:131
SCIDX
#define SCIDX
Definition: include/metis.h:106
nn
idx_t * nn
Definition: include/metis.h:207
mesh_t::ne
idx_t ne
Definition: libmetis/struct.h:127
ReadMesh
mesh_t * ReadMesh(params_t *params)
Definition: programs/io.c:178
i
int i
Definition: BiCGSTAB_step_by_step.cpp:9
imax
#define imax
Definition: gklib_rename.h:43
mesh_t::nn
idx_t nn
Definition: libmetis/struct.h:127
WritePartition
void WritePartition(char *fname, idx_t *part, idx_t n, idx_t nparts)
Definition: programs/io.c:425
graph_t
Definition: libmetis/struct.h:82
idx_t
int32_t idx_t
Definition: include/metis.h:101


gtsam
Author(s):
autogenerated on Sat Nov 16 2024 04:02:31