demo-simple2.cpp

Go to the documentation of this file.

//======================================================================
//======================================================================
 
#include <iostream>
#include <vector>
 
 
// Include the cSDH interface
#include "sdh/sdh.h"
#include "sdh/util.h"
#include "sdh/sdhlibrary_settings.h"
#include "sdh/basisdef.h"
#include "sdhoptions.h"
 
USING_NAMESPACE_SDH
 
char const* __help__      =
    "Move proximal and distal joints of finger 1 three times by 10 degrees, stop movement when halfway done.\n(C++ demo application using the SDHLibrary-CPP library.)\n"
    "\n"
    "- Example usage:\n"
    "  - Make SDH connected via Ethernet move.\n"
    "    The SDH has IP-Address 192.168.1.42 and is attached to TCP port 23.\n"
    "    (Requires at least SDH-firmware v0.0.3.1)\n"
    "    > demo-simple2 --tcp=192.168.1.42:23\n"
    "     \n"
    "  - Make SDH connected to port 2 = COM3 move:\n"
    "    > demo-simple2 -p 2\n"
    "     \n"
    "  - Make SDH connected to USB to RS232 converter 0 move:\n"
    "    > demo-simple2 --sdh_rs_device=/dev/ttyUSB0 \n"
    "     \n"
    "  - Get the version info of both the joint controllers and the tactile \n"
    "    sensor firmware from an SDH connected via Ethernet.\n"
    "    The joint controllers and the tactile sensors have a common IP-Address,\n"
    "    here 192.168.1.42. The SDH controller is attached to the \n"
    "    default TCP port 23 and the tactile sensors to the default TCP port 13000.\n"
    "    (Requires at least SDH-firmware v0.0.3.2)\n"
    "    > demo-simple2 --tcp=192.168.1.42 --dsa_tcp -v\n"
    "     \n"
    "  - Get the version info of an SDH connected to port 2 = COM3 \n"
    "    > demo-simple2 --port=2 -v\n";
char const* __author__    = "Dirk Osswald: dirk.osswald@de.schunk.com";
char const* __url__       = "http://www.schunk.com";
char const* __version__   = "$Id: demo-simple2.cpp 10351 2013-06-18 16:28:14Z Osswald2 $";
char const* __copyright__ = "Copyright (c) 2007 SCHUNK GmbH & Co. KG";
 
//  end of doxygen name group sdhlibrary_cpp_demo_simple2_cpp_vars
//  @}
 
 
 
int main( int argc, char** argv )
{
    SDH_ASSERT_TYPESIZES();
 
    //---------------------
    // handle command line options: set defaults first then overwrite by parsing actual command line
    cSDHOptions options;
 
    options.Parse( argc, argv, __help__, "demo-simple2", __version__, cSDH::GetLibraryName(), cSDH::GetLibraryRelease() );
    //
    //---------------------
 
    //---------------------
    // initialize debug message printing:
    cDBG cdbg( options.debug_level > 0, "red", options.debuglog );
    g_sdh_debug_log = options.debuglog;
 
    cdbg << "Debug messages of " << argv[0] << " are printed like this.\n";
 
    // reduce debug level for subsystems
    options.debug_level-=1;
    //---------------------
 
    int    iFinger        = 0;     // The index of the finger to move
 
    try
    {
        // Create an instance "hand" of the class cSDH:
        cSDH hand( options.use_radians, options.use_fahrenheit, options.debug_level );
        cdbg << "Successfully created cSDH instance\n";
 
        // Open configured communication to the SDH device
        options.OpenCommunication( hand );
        cdbg << "Successfully opened communication to SDH\n";
 
        // Switch to "pose" controller mode and set default velocities first:
        hand.SetController( hand.eCT_POSE );
        hand.SetAxisTargetVelocity( hand.All, 40.0 );
 
        // save current velocity profile and set velocity profile to ramp
        cSDH::eVelocityProfile old_profile = hand.GetVelocityProfile();
        hand.SetVelocityProfile( cSDH::eVP_RAMP );
 
        // Now perform some action:
        //   get the current actual axis angles of finger iFinger:
        std::vector<double> faa = hand.GetFingerActualAngle( iFinger );
 
        //   sometimes the actual angles are reported slightly out of range
        //   (Like -0.001 for axis 0 ). So limit the angles to the allowed range:
        ToRange( faa, hand.GetFingerMinAngle( iFinger ), hand.GetFingerMaxAngle( iFinger ) );
 
 
        //   modify faa by decrementing the proximal and the distal axis angles
        //   (make a copy fta of faa and modify that to keep actual pose available)
        std::vector<double> fta = faa;
 
        fta[1] -= 40.0;
        fta[2] -= 40.0;
 
        //   keep fta in range too:
        ToRange( fta, hand.GetFingerMinAngle( iFinger ), hand.GetFingerMaxAngle( iFinger ) );
 
        std::cout << "Moving finger " << iFinger << " between faa=" << faa << " and fta=" << fta << "\n";
 
        //   now move for 3 times between these two poses:
        for (int i=0; i<3; i++ )
        {
            // set a new target angles
            hand.SetFingerTargetAngle( iFinger, fta );
 
            // and make the finger move there, but call non-sequentially (i.e. return immediately):
            double t = hand.MoveFinger( iFinger, false );
            // The last call returned immediately, the finger is now moving for t seconds
 
            // So wait until that movement is half finished:
            SleepSec( t/2 );
 
            // Then stop the finger in the middle of the movement:
            // (necessary for velocity profile "sin square" not for "ramp"
            hand.Stop();
            std::cout << "Stopped at:" << hand.GetFingerActualAngle(iFinger) << "\n";
 
 
            // set a new target angles
            hand.SetFingerTargetAngle( iFinger, faa );
 
            // and make the finger move there:
            hand.MoveFinger( iFinger );
 
        }
 
        // restore previous velocity profile
        hand.SetVelocityProfile( old_profile );
 
        // Finally close connection to SDH again, this switches the axis controllers off
        hand.Close();
    }
    catch (cSDHLibraryException* e)
    {
        std::cerr << "demo-simple2 main(): An exception was caught: " << e->what() << "\n";
        delete e;
    }
}
//----------------------------------------------------------------------
 
 
//======================================================================
/*
  Here are some settings for the emacs/xemacs editor (and can be safely ignored)
  (e.g. to explicitely set C++ mode for *.h header files)
 
  Local Variables:
  mode:C++
  mode:ELSE
  End:
*/
//======================================================================]