Macros
stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h File Reference

HAL configuration file. More...

#include "stm32h7xx_hal_rcc.h"
#include "stm32h7xx_hal_gpio.h"
#include "stm32h7xx_hal_dma.h"
#include "stm32h7xx_hal_mdma.h"
#include "stm32h7xx_hal_dma2d.h"
#include "stm32h7xx_hal_dfsdm.h"
#include "stm32h7xx_hal_exti.h"
#include "stm32h7xx_hal_cortex.h"
#include "stm32h7xx_hal_crc.h"
#include "stm32h7xx_hal_flash.h"
#include "stm32h7xx_hal_hsem.h"
#include "stm32h7xx_hal_i2c.h"
#include "stm32h7xx_hal_ltdc.h"
#include "stm32h7xx_hal_ospi.h"
#include "stm32h7xx_hal_pwr.h"
#include "stm32h7xx_hal_sai.h"
#include "stm32h7xx_hal_uart.h"
Include dependency graph for stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h:

Go to the source code of this file.

Macros

#define assert_param(expr)   ((void)0U)
 Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code. More...
 
#define CSI_VALUE   (4000000UL)
 Internal oscillator (CSI) default value. This value is the default CSI value after Reset. More...
 
#define ETH_MAC_ADDR0   (0x02UL)
 
#define ETH_MAC_ADDR1   (0x00UL)
 
#define ETH_MAC_ADDR2   (0x00UL)
 
#define ETH_MAC_ADDR3   (0x00UL)
 
#define ETH_MAC_ADDR4   (0x00UL)
 
#define ETH_MAC_ADDR5   (0x00UL)
 
#define ETH_RX_DESC_CNT   4 /* number of Ethernet Rx DMA descriptors */
 
#define ETH_TX_DESC_CNT   4 /* number of Ethernet Tx DMA descriptors */
 
#define EXTERNAL_CLOCK_VALUE   12288000UL
 External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad. More...
 
#define HAL_CORTEX_MODULE_ENABLED
 
#define HAL_CRC_MODULE_ENABLED
 
#define HAL_DFSDM_MODULE_ENABLED
 
#define HAL_DMA2D_MODULE_ENABLED
 
#define HAL_DMA_MODULE_ENABLED
 
#define HAL_EXTI_MODULE_ENABLED
 
#define HAL_FLASH_MODULE_ENABLED
 
#define HAL_GPIO_MODULE_ENABLED
 
#define HAL_HSEM_MODULE_ENABLED
 
#define HAL_I2C_MODULE_ENABLED
 
#define HAL_LTDC_MODULE_ENABLED
 
#define HAL_MDMA_MODULE_ENABLED
 
#define HAL_MODULE_ENABLED
 This is the list of modules to be used in the HAL driver. More...
 
#define HAL_OSPI_MODULE_ENABLED
 
#define HAL_PWR_MODULE_ENABLED
 
#define HAL_RCC_MODULE_ENABLED
 
#define HAL_SAI_MODULE_ENABLED
 
#define HAL_UART_MODULE_ENABLED
 
#define HSE_STARTUP_TIMEOUT   (100UL)
 
#define HSE_VALUE   (25000000UL)
 Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL). More...
 
#define HSI_VALUE   (64000000UL)
 Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL). More...
 
#define LSE_STARTUP_TIMEOUT   (5000UL)
 
#define LSE_VALUE   (32768UL)
 External Low Speed oscillator (LSE) value. This value is used by the UART, RTC HAL module to compute the system frequency. More...
 
#define LSI_VALUE   (32000UL)
 
#define TICK_INT_PRIORITY   (0UL)
 
#define USE_HAL_ADC_REGISTER_CALLBACKS   0U /* ADC register callback disabled */
 
#define USE_HAL_CEC_REGISTER_CALLBACKS   0U /* CEC register callback disabled */
 
#define USE_HAL_COMP_REGISTER_CALLBACKS   0U /* COMP register callback disabled */
 
#define USE_HAL_CORDIC_REGISTER_CALLBACKS   0U /* CORDIC register callback disabled */
 
#define USE_HAL_CRYP_REGISTER_CALLBACKS   0U /* CRYP register callback disabled */
 
#define USE_HAL_DAC_REGISTER_CALLBACKS   0U /* DAC register callback disabled */
 
#define USE_HAL_DCMI_REGISTER_CALLBACKS   0U /* DCMI register callback disabled */
 
#define USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled */
 
#define USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled */
 
#define USE_HAL_DSI_REGISTER_CALLBACKS   0U /* DSI register callback disabled */
 
#define USE_HAL_DTS_REGISTER_CALLBACKS   0U /* DTS register callback disabled */
 
#define USE_HAL_ETH_REGISTER_CALLBACKS   0U /* ETH register callback disabled */
 
#define USE_HAL_FDCAN_REGISTER_CALLBACKS   0U /* FDCAN register callback disabled */
 
#define USE_HAL_FMAC_REGISTER_CALLBACKS   0U /* FMAC register callback disabled */
 
#define USE_HAL_GFXMMU_REGISTER_CALLBACKS   0U /* GFXMMU register callback disabled */
 
#define USE_HAL_HASH_REGISTER_CALLBACKS   0U /* HASH register callback disabled */
 
#define USE_HAL_HCD_REGISTER_CALLBACKS   0U /* HCD register callback disabled */
 
#define USE_HAL_HRTIM_REGISTER_CALLBACKS   0U /* HRTIM register callback disabled */
 
#define USE_HAL_I2C_REGISTER_CALLBACKS   0U /* I2C register callback disabled */
 
#define USE_HAL_I2S_REGISTER_CALLBACKS   0U /* I2S register callback disabled */
 
#define USE_HAL_IRDA_REGISTER_CALLBACKS   0U /* IRDA register callback disabled */
 
#define USE_HAL_JPEG_REGISTER_CALLBACKS   0U /* JPEG register callback disabled */
 
#define USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled */
 
#define USE_HAL_LTDC_REGISTER_CALLBACKS   0U /* LTDC register callback disabled */
 
#define USE_HAL_MDIOS_REGISTER_CALLBACKS   0U /* MDIO register callback disabled */
 
#define USE_HAL_MMC_REGISTER_CALLBACKS   0U /* MMC register callback disabled */
 
#define USE_HAL_NAND_REGISTER_CALLBACKS   0U /* NAND register callback disabled */
 
#define USE_HAL_NOR_REGISTER_CALLBACKS   0U /* NOR register callback disabled */
 
#define USE_HAL_OPAMP_REGISTER_CALLBACKS   0U /* MDIO register callback disabled */
 
#define USE_HAL_OSPI_REGISTER_CALLBACKS   0U /* OSPI register callback disabled */
 
#define USE_HAL_OTFDEC_REGISTER_CALLBACKS   0U /* OTFDEC register callback disabled */
 
#define USE_HAL_PCD_REGISTER_CALLBACKS   0U /* PCD register callback disabled */
 
#define USE_HAL_QSPI_REGISTER_CALLBACKS   0U /* QSPI register callback disabled */
 
#define USE_HAL_RNG_REGISTER_CALLBACKS   0U /* RNG register callback disabled */
 
#define USE_HAL_RTC_REGISTER_CALLBACKS   0U /* RTC register callback disabled */
 
#define USE_HAL_SAI_REGISTER_CALLBACKS   0U /* SAI register callback disabled */
 
#define USE_HAL_SD_REGISTER_CALLBACKS   0U /* SD register callback disabled */
 
#define USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled */
 
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
 
#define USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled */
 
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS   0U /* SPDIFRX register callback disabled */
 
#define USE_HAL_SPI_REGISTER_CALLBACKS   0U /* SPI register callback disabled */
 
#define USE_HAL_SRAM_REGISTER_CALLBACKS   0U /* SRAM register callback disabled */
 
#define USE_HAL_SWPMI_REGISTER_CALLBACKS   0U /* SWPMI register callback disabled */
 
#define USE_HAL_TIM_REGISTER_CALLBACKS   0U /* TIM register callback disabled */
 
#define USE_HAL_UART_REGISTER_CALLBACKS   0U /* UART register callback disabled */
 
#define USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled */
 
#define USE_HAL_WWDG_REGISTER_CALLBACKS   0U /* WWDG register callback disabled */
 
#define USE_RTOS   0
 
#define USE_SD_TRANSCEIVER   0U
 
#define USE_SPI_CRC   0U
 
#define VDD_VALUE   (3300UL)
 This is the HAL system configuration section. More...
 

Detailed Description

HAL configuration file.

Author
MCD Application Team
Attention

© Copyright (c) 2017 STMicroelectronics. All rights reserved.

This software component is licensed by ST under BSD 3-Clause license, the "License"; You may not use this file except in compliance with the License. You may obtain a copy of the License at: opensource.org/licenses/BSD-3-Clause

Definition in file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

Macro Definition Documentation

◆ assert_param

#define assert_param (   expr)    ((void)0U)

Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code.

Include module's header file

Definition at line 502 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ CSI_VALUE

#define CSI_VALUE   (4000000UL)

Internal oscillator (CSI) default value. This value is the default CSI value after Reset.

Value of the Internal oscillator in Hz

Definition at line 120 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ ETH_MAC_ADDR0

#define ETH_MAC_ADDR0   (0x02UL)

◆ ETH_MAC_ADDR1

#define ETH_MAC_ADDR1   (0x00UL)

◆ ETH_MAC_ADDR2

#define ETH_MAC_ADDR2   (0x00UL)

◆ ETH_MAC_ADDR3

#define ETH_MAC_ADDR3   (0x00UL)

◆ ETH_MAC_ADDR4

#define ETH_MAC_ADDR4   (0x00UL)

◆ ETH_MAC_ADDR5

#define ETH_MAC_ADDR5   (0x00UL)

◆ ETH_RX_DESC_CNT

#define ETH_RX_DESC_CNT   4 /* number of Ethernet Rx DMA descriptors */

◆ ETH_TX_DESC_CNT

#define ETH_TX_DESC_CNT   4 /* number of Ethernet Tx DMA descriptors */

◆ EXTERNAL_CLOCK_VALUE

#define EXTERNAL_CLOCK_VALUE   12288000UL

External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad.

< Value of the Internal Low Speed oscillator in Hz The real value may vary depending on the variations in voltage and temperature. Value of the External clock in Hz

Definition at line 156 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ HAL_CORTEX_MODULE_ENABLED

#define HAL_CORTEX_MODULE_ENABLED

◆ HAL_CRC_MODULE_ENABLED

#define HAL_CRC_MODULE_ENABLED

◆ HAL_DFSDM_MODULE_ENABLED

#define HAL_DFSDM_MODULE_ENABLED

◆ HAL_DMA2D_MODULE_ENABLED

#define HAL_DMA2D_MODULE_ENABLED

◆ HAL_DMA_MODULE_ENABLED

#define HAL_DMA_MODULE_ENABLED

◆ HAL_EXTI_MODULE_ENABLED

#define HAL_EXTI_MODULE_ENABLED

◆ HAL_FLASH_MODULE_ENABLED

#define HAL_FLASH_MODULE_ENABLED

◆ HAL_GPIO_MODULE_ENABLED

#define HAL_GPIO_MODULE_ENABLED

◆ HAL_HSEM_MODULE_ENABLED

#define HAL_HSEM_MODULE_ENABLED

◆ HAL_I2C_MODULE_ENABLED

#define HAL_I2C_MODULE_ENABLED

◆ HAL_LTDC_MODULE_ENABLED

#define HAL_LTDC_MODULE_ENABLED

◆ HAL_MDMA_MODULE_ENABLED

#define HAL_MDMA_MODULE_ENABLED

◆ HAL_MODULE_ENABLED

#define HAL_MODULE_ENABLED

This is the list of modules to be used in the HAL driver.

Definition at line 35 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ HAL_OSPI_MODULE_ENABLED

#define HAL_OSPI_MODULE_ENABLED

◆ HAL_PWR_MODULE_ENABLED

#define HAL_PWR_MODULE_ENABLED

◆ HAL_RCC_MODULE_ENABLED

#define HAL_RCC_MODULE_ENABLED

◆ HAL_SAI_MODULE_ENABLED

#define HAL_SAI_MODULE_ENABLED

◆ HAL_UART_MODULE_ENABLED

#define HAL_UART_MODULE_ENABLED

◆ HSE_STARTUP_TIMEOUT

#define HSE_STARTUP_TIMEOUT   (100UL)

Time out for HSE start up, in ms

Definition at line 112 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ HSE_VALUE

#define HSE_VALUE   (25000000UL)

Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL).

Value of the External oscillator in Hz : FPGA case fixed to 60MHZ

Definition at line 108 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ HSI_VALUE

#define HSI_VALUE   (64000000UL)

Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL).

Value of the Internal oscillator in Hz

Definition at line 129 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ LSE_STARTUP_TIMEOUT

#define LSE_STARTUP_TIMEOUT   (5000UL)

Time out for LSE start up, in ms

Definition at line 141 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ LSE_VALUE

#define LSE_VALUE   (32768UL)

External Low Speed oscillator (LSE) value. This value is used by the UART, RTC HAL module to compute the system frequency.

Value of the External oscillator in Hz

Definition at line 137 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ LSI_VALUE

#define LSI_VALUE   (32000UL)

LSI Typical Value in Hz

Definition at line 145 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ TICK_INT_PRIORITY

#define TICK_INT_PRIORITY   (0UL)

tick interrupt priority

Definition at line 167 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ USE_HAL_ADC_REGISTER_CALLBACKS

#define USE_HAL_ADC_REGISTER_CALLBACKS   0U /* ADC register callback disabled */

◆ USE_HAL_CEC_REGISTER_CALLBACKS

#define USE_HAL_CEC_REGISTER_CALLBACKS   0U /* CEC register callback disabled */

◆ USE_HAL_COMP_REGISTER_CALLBACKS

#define USE_HAL_COMP_REGISTER_CALLBACKS   0U /* COMP register callback disabled */

◆ USE_HAL_CORDIC_REGISTER_CALLBACKS

#define USE_HAL_CORDIC_REGISTER_CALLBACKS   0U /* CORDIC register callback disabled */

◆ USE_HAL_CRYP_REGISTER_CALLBACKS

#define USE_HAL_CRYP_REGISTER_CALLBACKS   0U /* CRYP register callback disabled */

◆ USE_HAL_DAC_REGISTER_CALLBACKS

#define USE_HAL_DAC_REGISTER_CALLBACKS   0U /* DAC register callback disabled */

◆ USE_HAL_DCMI_REGISTER_CALLBACKS

#define USE_HAL_DCMI_REGISTER_CALLBACKS   0U /* DCMI register callback disabled */

◆ USE_HAL_DFSDM_REGISTER_CALLBACKS

#define USE_HAL_DFSDM_REGISTER_CALLBACKS   0U /* DFSDM register callback disabled */

◆ USE_HAL_DMA2D_REGISTER_CALLBACKS

#define USE_HAL_DMA2D_REGISTER_CALLBACKS   0U /* DMA2D register callback disabled */

◆ USE_HAL_DSI_REGISTER_CALLBACKS

#define USE_HAL_DSI_REGISTER_CALLBACKS   0U /* DSI register callback disabled */

◆ USE_HAL_DTS_REGISTER_CALLBACKS

#define USE_HAL_DTS_REGISTER_CALLBACKS   0U /* DTS register callback disabled */

◆ USE_HAL_ETH_REGISTER_CALLBACKS

#define USE_HAL_ETH_REGISTER_CALLBACKS   0U /* ETH register callback disabled */

◆ USE_HAL_FDCAN_REGISTER_CALLBACKS

#define USE_HAL_FDCAN_REGISTER_CALLBACKS   0U /* FDCAN register callback disabled */

◆ USE_HAL_FMAC_REGISTER_CALLBACKS

#define USE_HAL_FMAC_REGISTER_CALLBACKS   0U /* FMAC register callback disabled */

◆ USE_HAL_GFXMMU_REGISTER_CALLBACKS

#define USE_HAL_GFXMMU_REGISTER_CALLBACKS   0U /* GFXMMU register callback disabled */

◆ USE_HAL_HASH_REGISTER_CALLBACKS

#define USE_HAL_HASH_REGISTER_CALLBACKS   0U /* HASH register callback disabled */

◆ USE_HAL_HCD_REGISTER_CALLBACKS

#define USE_HAL_HCD_REGISTER_CALLBACKS   0U /* HCD register callback disabled */

◆ USE_HAL_HRTIM_REGISTER_CALLBACKS

#define USE_HAL_HRTIM_REGISTER_CALLBACKS   0U /* HRTIM register callback disabled */

◆ USE_HAL_I2C_REGISTER_CALLBACKS

#define USE_HAL_I2C_REGISTER_CALLBACKS   0U /* I2C register callback disabled */

◆ USE_HAL_I2S_REGISTER_CALLBACKS

#define USE_HAL_I2S_REGISTER_CALLBACKS   0U /* I2S register callback disabled */

◆ USE_HAL_IRDA_REGISTER_CALLBACKS

#define USE_HAL_IRDA_REGISTER_CALLBACKS   0U /* IRDA register callback disabled */

◆ USE_HAL_JPEG_REGISTER_CALLBACKS

#define USE_HAL_JPEG_REGISTER_CALLBACKS   0U /* JPEG register callback disabled */

◆ USE_HAL_LPTIM_REGISTER_CALLBACKS

#define USE_HAL_LPTIM_REGISTER_CALLBACKS   0U /* LPTIM register callback disabled */

◆ USE_HAL_LTDC_REGISTER_CALLBACKS

#define USE_HAL_LTDC_REGISTER_CALLBACKS   0U /* LTDC register callback disabled */

◆ USE_HAL_MDIOS_REGISTER_CALLBACKS

#define USE_HAL_MDIOS_REGISTER_CALLBACKS   0U /* MDIO register callback disabled */

◆ USE_HAL_MMC_REGISTER_CALLBACKS

#define USE_HAL_MMC_REGISTER_CALLBACKS   0U /* MMC register callback disabled */

◆ USE_HAL_NAND_REGISTER_CALLBACKS

#define USE_HAL_NAND_REGISTER_CALLBACKS   0U /* NAND register callback disabled */

◆ USE_HAL_NOR_REGISTER_CALLBACKS

#define USE_HAL_NOR_REGISTER_CALLBACKS   0U /* NOR register callback disabled */

◆ USE_HAL_OPAMP_REGISTER_CALLBACKS

#define USE_HAL_OPAMP_REGISTER_CALLBACKS   0U /* MDIO register callback disabled */

◆ USE_HAL_OSPI_REGISTER_CALLBACKS

#define USE_HAL_OSPI_REGISTER_CALLBACKS   0U /* OSPI register callback disabled */

◆ USE_HAL_OTFDEC_REGISTER_CALLBACKS

#define USE_HAL_OTFDEC_REGISTER_CALLBACKS   0U /* OTFDEC register callback disabled */

◆ USE_HAL_PCD_REGISTER_CALLBACKS

#define USE_HAL_PCD_REGISTER_CALLBACKS   0U /* PCD register callback disabled */

◆ USE_HAL_QSPI_REGISTER_CALLBACKS

#define USE_HAL_QSPI_REGISTER_CALLBACKS   0U /* QSPI register callback disabled */

◆ USE_HAL_RNG_REGISTER_CALLBACKS

#define USE_HAL_RNG_REGISTER_CALLBACKS   0U /* RNG register callback disabled */

◆ USE_HAL_RTC_REGISTER_CALLBACKS

#define USE_HAL_RTC_REGISTER_CALLBACKS   0U /* RTC register callback disabled */

◆ USE_HAL_SAI_REGISTER_CALLBACKS

#define USE_HAL_SAI_REGISTER_CALLBACKS   0U /* SAI register callback disabled */

◆ USE_HAL_SD_REGISTER_CALLBACKS

#define USE_HAL_SD_REGISTER_CALLBACKS   0U /* SD register callback disabled */

◆ USE_HAL_SDRAM_REGISTER_CALLBACKS

#define USE_HAL_SDRAM_REGISTER_CALLBACKS   0U /* SDRAM register callback disabled */

◆ USE_HAL_SMARTCARD_REGISTER_CALLBACKS

#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */

◆ USE_HAL_SMBUS_REGISTER_CALLBACKS

#define USE_HAL_SMBUS_REGISTER_CALLBACKS   0U /* SMBUS register callback disabled */

◆ USE_HAL_SPDIFRX_REGISTER_CALLBACKS

#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS   0U /* SPDIFRX register callback disabled */

◆ USE_HAL_SPI_REGISTER_CALLBACKS

#define USE_HAL_SPI_REGISTER_CALLBACKS   0U /* SPI register callback disabled */

◆ USE_HAL_SRAM_REGISTER_CALLBACKS

#define USE_HAL_SRAM_REGISTER_CALLBACKS   0U /* SRAM register callback disabled */

◆ USE_HAL_SWPMI_REGISTER_CALLBACKS

#define USE_HAL_SWPMI_REGISTER_CALLBACKS   0U /* SWPMI register callback disabled */

◆ USE_HAL_TIM_REGISTER_CALLBACKS

#define USE_HAL_TIM_REGISTER_CALLBACKS   0U /* TIM register callback disabled */

◆ USE_HAL_UART_REGISTER_CALLBACKS

#define USE_HAL_UART_REGISTER_CALLBACKS   0U /* UART register callback disabled */

◆ USE_HAL_USART_REGISTER_CALLBACKS

#define USE_HAL_USART_REGISTER_CALLBACKS   0U /* USART register callback disabled */

◆ USE_HAL_WWDG_REGISTER_CALLBACKS

#define USE_HAL_WWDG_REGISTER_CALLBACKS   0U /* WWDG register callback disabled */

◆ USE_RTOS

#define USE_RTOS   0

◆ USE_SD_TRANSCEIVER

#define USE_SD_TRANSCEIVER   0U

use uSD Transceiver

Definition at line 169 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ USE_SPI_CRC

#define USE_SPI_CRC   0U

use CRC in SPI

Definition at line 170 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.

◆ VDD_VALUE

#define VDD_VALUE   (3300UL)

This is the HAL system configuration section.

Value of VDD in mv

Definition at line 166 of file stm32h735/stm32h735g-dk/Inc/stm32h7xx_hal_conf.h.



picovoice_driver
Author(s):
autogenerated on Fri Apr 1 2022 02:15:03