This file contains all the functions prototypes for the RTC firmware library. More...
#include "stm32f10x.h"
Include dependency graph for stm32f10x_rtc.h:
This graph shows which files directly or indirectly include this file:
Go to the source code of this file.
Macros | |
| #define | IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00)) |
| #define | IS_RTC_GET_FLAG(FLAG) |
| #define | IS_RTC_GET_IT(IT) |
| #define | IS_RTC_IT(IT) ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00)) |
| #define | IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF) |
| #define | RTC_FLAG_ALR ((uint16_t)0x0002) |
| #define | RTC_FLAG_OW ((uint16_t)0x0004) |
| #define | RTC_FLAG_RSF ((uint16_t)0x0008) |
| #define | RTC_FLAG_RTOFF ((uint16_t)0x0020) |
| #define | RTC_FLAG_SEC ((uint16_t)0x0001) |
| #define | RTC_IT_ALR ((uint16_t)0x0002) |
| #define | RTC_IT_OW ((uint16_t)0x0004) |
| #define | RTC_IT_SEC ((uint16_t)0x0001) |
Functions | |
| void | RTC_ClearFlag (uint16_t RTC_FLAG) |
| Clears the RTC's pending flags. More... | |
| void | RTC_ClearITPendingBit (uint16_t RTC_IT) |
| Clears the RTC's interrupt pending bits. More... | |
| void | RTC_EnterConfigMode (void) |
| Enters the RTC configuration mode. More... | |
| void | RTC_ExitConfigMode (void) |
| Exits from the RTC configuration mode. More... | |
| uint32_t | RTC_GetCounter (void) |
| Gets the RTC counter value. More... | |
| uint32_t | RTC_GetDivider (void) |
| Gets the RTC divider value. More... | |
| FlagStatus | RTC_GetFlagStatus (uint16_t RTC_FLAG) |
| Checks whether the specified RTC flag is set or not. More... | |
| ITStatus | RTC_GetITStatus (uint16_t RTC_IT) |
| Checks whether the specified RTC interrupt has occurred or not. More... | |
| void | RTC_ITConfig (uint16_t RTC_IT, FunctionalState NewState) |
| Enables or disables the specified RTC interrupts. More... | |
| void | RTC_SetAlarm (uint32_t AlarmValue) |
| Sets the RTC alarm value. More... | |
| void | RTC_SetCounter (uint32_t CounterValue) |
| Sets the RTC counter value. More... | |
| void | RTC_SetPrescaler (uint32_t PrescalerValue) |
| Sets the RTC prescaler value. More... | |
| void | RTC_WaitForLastTask (void) |
| Waits until last write operation on RTC registers has finished. More... | |
| void | RTC_WaitForSynchro (void) |
| Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are synchronized with RTC APB clock. More... | |
Detailed Description
This file contains all the functions prototypes for the RTC firmware library.
- Version
- V3.5.0
- Date
- 11-March-2011
- Attention
THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
© COPYRIGHT 2011 STMicroelectronics
Definition in file stm32f10x_rtc.h.