24 #ifndef __STM32F10x_PWR_H 25 #define __STM32F10x_PWR_H 58 #define PWR_PVDLevel_2V2 ((uint32_t)0x00000000) 59 #define PWR_PVDLevel_2V3 ((uint32_t)0x00000020) 60 #define PWR_PVDLevel_2V4 ((uint32_t)0x00000040) 61 #define PWR_PVDLevel_2V5 ((uint32_t)0x00000060) 62 #define PWR_PVDLevel_2V6 ((uint32_t)0x00000080) 63 #define PWR_PVDLevel_2V7 ((uint32_t)0x000000A0) 64 #define PWR_PVDLevel_2V8 ((uint32_t)0x000000C0) 65 #define PWR_PVDLevel_2V9 ((uint32_t)0x000000E0) 66 #define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \ 67 ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \ 68 ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \ 69 ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9)) 78 #define PWR_Regulator_ON ((uint32_t)0x00000000) 79 #define PWR_Regulator_LowPower ((uint32_t)0x00000001) 80 #define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ 81 ((REGULATOR) == PWR_Regulator_LowPower)) 90 #define PWR_STOPEntry_WFI ((uint8_t)0x01) 91 #define PWR_STOPEntry_WFE ((uint8_t)0x02) 92 #define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE)) 102 #define PWR_FLAG_WU ((uint32_t)0x00000001) 103 #define PWR_FLAG_SB ((uint32_t)0x00000002) 104 #define PWR_FLAG_PVDO ((uint32_t)0x00000004) 105 #define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ 106 ((FLAG) == PWR_FLAG_PVDO)) 108 #define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB))
void PWR_WakeUpPinCmd(FunctionalState NewState)
Enables or disables the WakeUp Pin functionality.
void PWR_BackupAccessCmd(FunctionalState NewState)
Enables or disables access to the backup domain (RTC registers, RTC backup data registers and backup ...
void PWR_DeInit(void)
Deinitializes the PWR peripheral registers to their default reset values.
void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry)
Enters STOP mode.
void PWR_EnterSTANDBYMode(void)
Enters STANDBY mode.
FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG)
Checks whether the specified PWR flag is set or not.
void PWR_ClearFlag(uint32_t PWR_FLAG)
Clears the PWR's pending flags.
void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel)
Configures the voltage threshold detected by the Power Voltage Detector(PVD).
void PWR_PVDCmd(FunctionalState NewState)
Enables or disables the Power Voltage Detector(PVD).
CMSIS Cortex-M3 Device Peripheral Access Layer Header File. This file contains all the peripheral reg...