$search

main.c

Go to the documentation of this file.

/*
        Aseba - an event-based framework for distributed robot control
        Copyright (C) 2007--2010:
                Stephane Magnenat <stephane at magnenat dot net>
                (http://stephane.magnenat.net)
                and other contributors, see authors.txt for details
        
        This program is free software: you can redistribute it and/or modify
        it under the terms of the GNU Lesser General Public License as published
        by the Free Software Foundation, version 3 of the License.
        
        This program is distributed in the hope that it will be useful,
        but WITHOUT ANY WARRANTY; without even the implied warranty of
        MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        GNU Lesser General Public License for more details.
        
        You should have received a copy of the GNU Lesser General Public License
        along with this program. If not, see <http://www.gnu.org/licenses/>.
*/

#include "hardware.h"
#include <transport/can/can-net.h>
#include <common/consts.h>
#include <can/can.h>
#include <dma/dma.h>
#include <gpio/gpio.h>
#include <uart/uart-software-fc.h>
#include <clock/clock.h>
#include <error/error.h>
#include <types/types.h>
#include <timer/timer.h>
#include <ei/ei.h>
#include <adc/adc.h>

#include "morse.h"


_FWDT(FWDTEN_OFF);              // Watchdog Timer disabled
_FOSCSEL(FNOSC_FRCPLL); // override oscillator configuration bits
_FOSC(POSCMD_NONE & OSCIOFNC_ON);
// ICD communicates on PGC1/EMUC1 and disable JTAG
_FICD(ICS_PGD1 & JTAGEN_OFF);

#define PRIO_CAN 5
#define PRIO_UART 5
#define PRIO_UART_TH 6

#define TIMER_UART TIMER_1

/* buffers for can-net */
#define SEND_QUEUE_SIZE 260
static  __attribute((far)) CanFrame sendQueue[SEND_QUEUE_SIZE];
#define RECV_QUEUE_SIZE 1100
static  __attribute((far)) CanFrame recvQueue[RECV_QUEUE_SIZE];

/* buffers for uart */
static __attribute((far)) __attribute((aligned(2))) unsigned char uartSendBuffer[ASEBA_MAX_OUTER_PACKET_SIZE];
static unsigned uartSendPos;
static unsigned uartSendSize;
static __attribute((far))  __attribute((aligned(2))) unsigned char uartRecvBuffer[ASEBA_MAX_OUTER_PACKET_SIZE];
static unsigned uartRecvPos;



volatile int global_flag = 0;

#define OUTPUT_ERROR(err)  do{ for(;;) output_error(err,LED0,0,1); }while(0)

static void can_tx_cb(void)
{
        if(global_flag)
                OUTPUT_ERROR(global_flag);
        global_flag = 1;

        AsebaCanFrameSent();
        
        // A message is waiting on the uart (it's complete but still waiting because we were full)
        // Check if we can send it now
        if ((uartRecvPos >= 6) && (uartRecvPos == 6 + ((uint16 *)uartRecvBuffer)[0])) 
        {
                uint16 source = ((uint16 *)uartRecvBuffer)[1];
                if (AsebaCanSendSpecificSource(uartRecvBuffer+4, uartRecvPos-4, source) == 1)
                {
                        uartRecvPos = 0;
                        uart_read_pending_data(U_UART);
                } 
        }
        global_flag = 0;
}

static void can_rx_cb(const can_frame* frame)
{
        if(global_flag)
                OUTPUT_ERROR(global_flag);
        global_flag = 2;
        
        // we do a nasty cast because the two data structure are compatible, i.e. they have the same leading members
        AsebaCanFrameReceived((CanFrame *) frame);
        
        uint16 source;
                
        if(uartSendPos == uartSendSize) 
        {
                int amount = AsebaCanRecv(uartSendBuffer+4, ASEBA_MAX_INNER_PACKET_SIZE, &source);
                if (amount > 0)
                {
                        ((uint16 *)uartSendBuffer)[0] = (uint16)amount - 2;
                        ((uint16 *)uartSendBuffer)[1] = source;
                        uartSendSize = (unsigned)amount + 4;

                        if(uart_transmit_byte(U_UART, uartSendBuffer[0]))
                                uartSendPos = 1;
                        else
                                uartSendPos = 0;
                }
        }
        global_flag = 0;
        
}

static bool uart_rx_cb(int __attribute((unused)) uart_id, unsigned char data, void * __attribute((unused)) user_data)
{
        if(global_flag)
                OUTPUT_ERROR(global_flag);
        global_flag = 3;
        
        // TODO: in case of bug, we might want to test for overflow here, but it should never happen if higher layer conform to specification
        uartRecvBuffer[uartRecvPos++] = data;
        
        // if we have received the header and all the message payload data forward it to the can layer
        if ((uartRecvPos >= 6) && (uartRecvPos == 6 + ((uint16 *)uartRecvBuffer)[0])) 
        {
                        
                uint16 source = ((uint16 *)uartRecvBuffer)[1];
                if (AsebaCanSendSpecificSource(uartRecvBuffer+4, uartRecvPos-4, source) == 1)
                {
                        // Was able to queue frame to can layer. Setup the buffer pointer for next reception
                        uartRecvPos = 0;
                        global_flag = 0;
                        return true;
                } else {
                        // Stop reception, flow control will help us to not lose any packet
                        global_flag = 0;
                        return false;
                }
        }
        global_flag = 0;
        return true;
}

static bool uart_tx_cb(int __attribute((unused)) uart_id, unsigned char* data, void*  __attribute((unused)) user_data)
{
        if(global_flag)
                OUTPUT_ERROR(global_flag);
        global_flag = 4;
        
        if (uartSendPos < uartSendSize)
        {
                *data = uartSendBuffer[uartSendPos++];
                global_flag = 0;
                return true;
        }
        else
        {
                // We finished sending the previous packet
        
                // ...and if there is a new message on CAN, read it
                uint16 source;
                        
                int amount = AsebaCanRecv(uartSendBuffer+4, ASEBA_MAX_INNER_PACKET_SIZE, &source);
                if (amount > 0)
                {
                        ((uint16 *)uartSendBuffer)[0] = (uint16)amount - 2;
                        ((uint16 *)uartSendBuffer)[1] = source;
                        uartSendSize = (unsigned)amount + 4;
                        uartSendPos = 1;
                        *data = uartSendBuffer[0];
                        global_flag = 0;
                        return true;
                }
        
                global_flag = 0;
                return false;
        }
}

void AsebaIdle(void) {
        // Should NEVER be called
        OUTPUT_ERROR(5);
}

uint16 AsebaShouldDropPacket(uint16 source, const uint8* data) {
        return 0;
}       

static void received_packet_dropped(void)
{
        // light a LED, we have dropped an aseba message from the CAN because we were not able to send previous ones fast enough on UART
        gpio_write(LED1, 0);
}

static void sent_packet_dropped(void)
{
        // light a LED, the packet is in fact not dropped because UART has flow control and the translator will try again later
        gpio_write(LED1, 0);
}

void __attribute__((noreturn)) error_handler(const char __attribute((unused))  * file, int __attribute((unused)) line, int id, void* __attribute((unused)) arg) {
        OUTPUT_ERROR(id);       
}

/* initialization and main loop */
int main(void)
{
        int i;
                        
        if(_POR) {
                _POR = 0;
                asm __volatile("reset");
        }
        
        clock_init_internal_rc_30();
        
        // Wait about 1 s before really starting. The Bluetooth chip need a LOT of time before 
        // having stable output (else we recieve "Phantom" character on uart)
        
        for(i = 0; i < 1000; i++) 
                clock_delay_us(1000);
        
        gpio_write(LED0, 1);
        gpio_write(LED1, 1);
        gpio_set_dir(LED0, GPIO_OUTPUT);
        gpio_set_dir(LED1, GPIO_OUTPUT);

        error_register_callback(error_handler);


        adc1_init_simple(NULL, 1, 0x0UL, 30);
        
        can_init(can_rx_cb, can_tx_cb, DMA_CHANNEL_0, DMA_CHANNEL_1, CAN_SELECT_MODE, 1000, PRIO_CAN);
        uart_init(U_UART, 921600, UART_CTS, UART_RTS, TIMER_UART, uart_rx_cb, uart_tx_cb, PRIO_UART_TH, PRIO_UART, NULL);

        AsebaCanInit(0, (AsebaCanSendFrameFP)can_send_frame, can_is_frame_room, received_packet_dropped, sent_packet_dropped, sendQueue, SEND_QUEUE_SIZE, recvQueue, RECV_QUEUE_SIZE);

        
        while (1)
        {
                // Sleep until something happens
                Idle();
        };
}

---

aseba
Author(s): Stéphane Magnenat
autogenerated on Sat Mar 2 12:31:37 2013