sbgEComCmdGnss.c

Go to the documentation of this file.

/* sbgCommonLib headers */
#include <sbgCommon.h>
#include <streamBuffer/sbgStreamBuffer.h>
 
/* Project headers */
 
/* Local headers */
#include "sbgEComCmdGnss.h"
#include "transfer/sbgEComTransfer.h"
 
//----------------------------------------------------------------------//
//- Private methods                                                    -//
//----------------------------------------------------------------------//
 
static SbgErrorCode sbgEComCmdGnssSetModelId(SbgEComHandle *pHandle, uint32_t id, SbgEComCmd cmdId)
{
        assert(pHandle);
 
        //
        // Call generic function with specific command name
        //
        return sbgEComCmdGenericSetModelId(pHandle, SBG_ECOM_CLASS_LOG_CMD_0, cmdId, id);
}
 
static SbgErrorCode sbgEComCmdGnssGetModelInfo(SbgEComHandle *pHandle, SbgEComModelInfo *pModelInfo, SbgEComCmd cmdId)
{
        assert(pHandle);
        assert(pModelInfo);
 
        //
        // Call generic function with specific command name
        //
        return sbgEComCmdGenericGetModelInfo(pHandle, SBG_ECOM_CLASS_LOG_CMD_0, cmdId, pModelInfo);
}
 
static SbgErrorCode sbgEComCmdGnssInstallationGet(SbgEComHandle *pHandle, SbgEComGnssInstallation *pGnssInstallation, SbgEComCmd cmdId)
{
        SbgErrorCode            errorCode = SBG_NO_ERROR;
        uint32_t                        trial;
        size_t                          receivedSize;
        uint8_t                         receivedBuffer[SBG_ECOM_MAX_BUFFER_SIZE];
        SbgStreamBuffer         inputStream;
 
        assert(pHandle);
        assert(pGnssInstallation);
 
        //
        // Send the command three times
        //
        for (trial = 0; trial < pHandle->numTrials; trial++)
        {
                //
                // Send the command only since this is a no-payload command
                //
                errorCode = sbgEComProtocolSend(&pHandle->protocolHandle, SBG_ECOM_CLASS_LOG_CMD_0, cmdId, NULL, 0);
 
                //
                // Make sure that the command has been sent
                //
                if (errorCode == SBG_NO_ERROR)
                {
                        //
                        // Try to read the device answer for 500 ms
                        //
                        errorCode = sbgEComReceiveCmd(pHandle, SBG_ECOM_CLASS_LOG_CMD_0, cmdId, receivedBuffer, &receivedSize, sizeof(receivedBuffer), pHandle->cmdDefaultTimeOut);
 
                        //
                        // Test if we have received a valid answer
                        //
                        if (errorCode == SBG_NO_ERROR)
                        {
                                //
                                // Initialize stream buffer to read parameters
                                //
                                sbgStreamBufferInitForRead(&inputStream, receivedBuffer, receivedSize);
 
                                //
                                // Read parameters
                                //
                                pGnssInstallation->leverArmPrimary[0]           = sbgStreamBufferReadFloatLE(&inputStream);
                                pGnssInstallation->leverArmPrimary[1]           = sbgStreamBufferReadFloatLE(&inputStream);
                                pGnssInstallation->leverArmPrimary[2]           = sbgStreamBufferReadFloatLE(&inputStream);
                                pGnssInstallation->leverArmPrimaryPrecise       = sbgStreamBufferReadBooleanLE(&inputStream);
 
                                pGnssInstallation->leverArmSecondary[0]         = sbgStreamBufferReadFloatLE(&inputStream);
                                pGnssInstallation->leverArmSecondary[1]         = sbgStreamBufferReadFloatLE(&inputStream);
                                pGnssInstallation->leverArmSecondary[2]         = sbgStreamBufferReadFloatLE(&inputStream);
                                pGnssInstallation->leverArmSecondaryMode        = (SbgEComGnssInstallationMode)sbgStreamBufferReadUint8LE(&inputStream);
                                
                                //
                                // The command has been executed successfully so return
                                //
                                break;
                        }
                }
                else
                {
                        //
                        // We have a write error so exit the try loop
                        //
                        break;
                }
        }
        
        return errorCode;
}
 
static SbgErrorCode sbgEComCmdGnssInstallationSet(SbgEComHandle *pHandle, const SbgEComGnssInstallation *pGnssInstallation, SbgEComCmd cmdId)
{
        SbgErrorCode            errorCode = SBG_NO_ERROR;
        uint32_t                        trial;
        uint8_t                         outputBuffer[SBG_ECOM_MAX_BUFFER_SIZE];
        SbgStreamBuffer         outputStream;
 
        assert(pHandle);
        assert(pGnssInstallation);
 
        //
        // Send the command three times
        //
        for (trial = 0; trial < pHandle->numTrials; trial++)
        {
                //
                // Initialize stream buffer for output
                //
                sbgStreamBufferInitForWrite(&outputStream, outputBuffer, sizeof(outputBuffer));
 
                //
                // Build payload
                //
                sbgStreamBufferWriteFloatLE(&outputStream, pGnssInstallation->leverArmPrimary[0]);
                sbgStreamBufferWriteFloatLE(&outputStream, pGnssInstallation->leverArmPrimary[1]);
                sbgStreamBufferWriteFloatLE(&outputStream, pGnssInstallation->leverArmPrimary[2]);
                sbgStreamBufferWriteBooleanLE(&outputStream, pGnssInstallation->leverArmPrimaryPrecise);
 
                sbgStreamBufferWriteFloatLE(&outputStream, pGnssInstallation->leverArmSecondary[0]);
                sbgStreamBufferWriteFloatLE(&outputStream, pGnssInstallation->leverArmSecondary[1]);
                sbgStreamBufferWriteFloatLE(&outputStream, pGnssInstallation->leverArmSecondary[2]);
                sbgStreamBufferWriteUint8LE(&outputStream, pGnssInstallation->leverArmSecondaryMode);
 
                //
                // Send the payload over ECom
                //
                errorCode = sbgEComProtocolSend(&pHandle->protocolHandle, SBG_ECOM_CLASS_LOG_CMD_0, cmdId, sbgStreamBufferGetLinkedBuffer(&outputStream), sbgStreamBufferGetLength(&outputStream));
 
                //
                // Make sure that the command has been sent
                //
                if (errorCode == SBG_NO_ERROR)
                {
                        //
                        // Try to read the device answer for 500 ms
                        //
                        errorCode = sbgEComWaitForAck(pHandle, SBG_ECOM_CLASS_LOG_CMD_0, cmdId, pHandle->cmdDefaultTimeOut);
 
                        //
                        // Test if we have received a valid ACK
                        //
                        if (errorCode == SBG_NO_ERROR)
                        {
                                //
                                // The command has been executed successfully so return
                                //
                                break;
                        }
                }
                else
                {
                        //
                        // We have a write error so exit the try loop
                        //
                        break;
                }
        }
        
        return errorCode;
}
 
static SbgErrorCode sbgEComCmdGnssGetRejection(SbgEComHandle *pHandle, SbgEComGnssRejectionConf *pRejectConf, SbgEComCmd cmdId)
{
        SbgErrorCode            errorCode = SBG_NO_ERROR;
        uint32_t                        trial;
        size_t                          receivedSize;
        uint8_t                         receivedBuffer[SBG_ECOM_MAX_BUFFER_SIZE];
        SbgStreamBuffer         inputStream;
 
        assert(pHandle);
        assert(pRejectConf);
 
        //
        // Send the command three times
        //
        for (trial = 0; trial < pHandle->numTrials; trial++)
        {
                //
                // Send the command only since this is a no-payload command
                //
                errorCode = sbgEComProtocolSend(&pHandle->protocolHandle, SBG_ECOM_CLASS_LOG_CMD_0, cmdId, NULL, 0);
 
                //
                // Make sure that the command has been sent
                //
                if (errorCode == SBG_NO_ERROR)
                {
                        //
                        // Try to read the device answer for 500 ms
                        //
                        errorCode = sbgEComReceiveCmd(pHandle, SBG_ECOM_CLASS_LOG_CMD_0, cmdId, receivedBuffer, &receivedSize, sizeof(receivedBuffer), pHandle->cmdDefaultTimeOut);
 
                        //
                        // Test if we have received a SBG_ECOM_CMD_GNSS_1_REJECT_MODES command
                        //
                        if (errorCode == SBG_NO_ERROR)
                        {
                                //
                                // Initialize stream buffer to read parameters
                                //
                                sbgStreamBufferInitForRead(&inputStream, receivedBuffer, receivedSize);
 
                                //
                                // Read parameters
                                //
                                pRejectConf->position   = (SbgEComRejectionMode)sbgStreamBufferReadUint8LE(&inputStream);
                                pRejectConf->velocity   = (SbgEComRejectionMode)sbgStreamBufferReadUint8LE(&inputStream);
                                sbgStreamBufferReadUint8LE(&inputStream);                                                                                                       // Skipped for backward compatibility
                                pRejectConf->hdt                = (SbgEComRejectionMode)sbgStreamBufferReadUint8LE(&inputStream);
 
                                //
                                // The command has been executed successfully so return
                                //
                                break;
                        }
                }
                else
                {
                        //
                        // We have a write error so exit the try loop
                        //
                        break;
                }
        }
        
        return errorCode;
}
 
static SbgErrorCode sbgEComCmdGnssSetRejection(SbgEComHandle *pHandle, const SbgEComGnssRejectionConf *pRejectConf, SbgEComCmd cmdId)
{
        SbgErrorCode            errorCode = SBG_NO_ERROR;
        uint32_t                        trial;
        uint8_t                         outputBuffer[SBG_ECOM_MAX_BUFFER_SIZE];
        SbgStreamBuffer         outputStream;
 
        assert(pHandle);
        assert(pRejectConf);
 
        //
        // Send the command three times
        //
        for (trial = 0; trial < pHandle->numTrials; trial++)
        {
                //
                // Init stream buffer for output
                //
                sbgStreamBufferInitForWrite(&outputStream, outputBuffer, sizeof(outputBuffer));
 
                //
                // Build payload
                //
                sbgStreamBufferWriteUint8LE(&outputStream, (uint8_t)pRejectConf->position);
                sbgStreamBufferWriteUint8LE(&outputStream, (uint8_t)pRejectConf->velocity);
                sbgStreamBufferWriteUint8LE(&outputStream, (uint8_t)SBG_ECOM_NEVER_ACCEPT_MODE);                // Reserved parameter
                sbgStreamBufferWriteUint8LE(&outputStream, (uint8_t)pRejectConf->hdt);
 
                //
                // Send the payload over ECom
                //
                errorCode = sbgEComProtocolSend(&pHandle->protocolHandle, SBG_ECOM_CLASS_LOG_CMD_0, cmdId, sbgStreamBufferGetLinkedBuffer(&outputStream), sbgStreamBufferGetLength(&outputStream));
 
                //
                // Make sure that the command has been sent
                //
                if (errorCode == SBG_NO_ERROR)
                {
                        //
                        // Try to read the device answer for 500 ms
                        //
                        errorCode = sbgEComWaitForAck(pHandle, SBG_ECOM_CLASS_LOG_CMD_0, cmdId, pHandle->cmdDefaultTimeOut);
 
                        //
                        // Test if we have received a valid ACK
                        //
                        if (errorCode == SBG_NO_ERROR)
                        {
                                //
                                // The command has been executed successfully so return
                                //
                                break;
                        }
                }
                else
                {
                        //
                        // We have a write error so exit the try loop
                        //
                        break;
                }
        }
        
        return errorCode;
}
 
//----------------------------------------------------------------------//
//- GNSS public commands                                                       -//
//----------------------------------------------------------------------//
 
SbgErrorCode sbgEComCmdGnss1SetModelId(SbgEComHandle *pHandle, uint32_t id)
{
        assert(pHandle);
 
        return sbgEComCmdGnssSetModelId(pHandle, id, SBG_ECOM_CMD_GNSS_1_MODEL_ID);
}
 
SbgErrorCode sbgEComCmdGnss1GetModelInfo(SbgEComHandle *pHandle, SbgEComModelInfo *pModelInfo)
{
        assert(pHandle);
        assert(pModelInfo);
 
        return sbgEComCmdGnssGetModelInfo(pHandle, pModelInfo, SBG_ECOM_CMD_GNSS_1_MODEL_ID);
}
 
SbgErrorCode sbgEComCmdGnss1GetLeverArmAlignment(SbgEComHandle *pHandle, SbgEComGnssAlignmentInfo *pAlignConf)
{
        SbgErrorCode            errorCode = SBG_NO_ERROR;
        uint32_t                        trial;
        size_t                          receivedSize;
        uint8_t                         receivedBuffer[SBG_ECOM_MAX_BUFFER_SIZE];
        SbgStreamBuffer         inputStream;
 
        assert(pHandle);
        assert(pAlignConf);
 
        //
        // Send the command three times
        //
        for (trial = 0; trial < pHandle->numTrials; trial++)
        {
                //
                // Send the command only since this is a no-payload command
                //
                errorCode = sbgEComProtocolSend(&pHandle->protocolHandle, SBG_ECOM_CLASS_LOG_CMD_0, SBG_ECOM_CMD_GNSS_1_LEVER_ARM_ALIGNMENT, NULL, 0);
 
                //
                // Make sure that the command has been sent
                //
                if (errorCode == SBG_NO_ERROR)
                {
                        //
                        // Try to read the device answer for 500 ms
                        //
                        errorCode = sbgEComReceiveCmd(pHandle, SBG_ECOM_CLASS_LOG_CMD_0, SBG_ECOM_CMD_GNSS_1_LEVER_ARM_ALIGNMENT, receivedBuffer, &receivedSize, sizeof(receivedBuffer), pHandle->cmdDefaultTimeOut);
 
                        //
                        // Test if we have received a SBG_ECOM_CMD_GNSS_1_LEVER_ARM_ALIGNMENT command
                        //
                        if (errorCode == SBG_NO_ERROR)
                        {
                                //
                                // Initialize stream buffer to read parameters
                                //
                                sbgStreamBufferInitForRead(&inputStream, receivedBuffer, receivedSize);
 
                                //
                                // Read parameters
                                //
                                pAlignConf->leverArmX = sbgStreamBufferReadFloatLE(&inputStream);
                                pAlignConf->leverArmY = sbgStreamBufferReadFloatLE(&inputStream);
                                pAlignConf->leverArmZ = sbgStreamBufferReadFloatLE(&inputStream);
                                pAlignConf->pitchOffset = sbgStreamBufferReadFloatLE(&inputStream);
                                pAlignConf->yawOffset = sbgStreamBufferReadFloatLE(&inputStream);
                                pAlignConf->antennaDistance = sbgStreamBufferReadFloatLE(&inputStream);
 
                                //
                                // The command has been executed successfully so return
                                //
                                break;
                        }
                }
                else
                {
                        //
                        // We have a write error so exit the try loop
                        //
                        break;
                }
        }
        
        return errorCode;
}
 
SbgErrorCode sbgEComCmdGnss1SetLeverArmAlignment(SbgEComHandle *pHandle, const SbgEComGnssAlignmentInfo *pAlignConf)
{
        SbgErrorCode            errorCode = SBG_NO_ERROR;
        uint32_t                        trial;
        uint8_t                         outputBuffer[SBG_ECOM_MAX_BUFFER_SIZE];
        SbgStreamBuffer         outputStream;
 
        assert(pHandle);
        assert(pAlignConf);
 
        //
        // Send the command three times
        //
        for (trial = 0; trial < pHandle->numTrials; trial++)
        {
                //
                // Initialize stream buffer for output
                //
                sbgStreamBufferInitForWrite(&outputStream, outputBuffer, sizeof(outputBuffer));
 
                //
                // Build payload
                //
                sbgStreamBufferWriteFloatLE(&outputStream, pAlignConf->leverArmX);
                sbgStreamBufferWriteFloatLE(&outputStream, pAlignConf->leverArmY);
                sbgStreamBufferWriteFloatLE(&outputStream, pAlignConf->leverArmZ);
                sbgStreamBufferWriteFloatLE(&outputStream, pAlignConf->pitchOffset);
                sbgStreamBufferWriteFloatLE(&outputStream, pAlignConf->yawOffset);
                sbgStreamBufferWriteFloatLE(&outputStream, pAlignConf->antennaDistance);
 
                //
                // Send the payload over ECom
                //
                errorCode = sbgEComProtocolSend(&pHandle->protocolHandle, SBG_ECOM_CLASS_LOG_CMD_0, SBG_ECOM_CMD_GNSS_1_LEVER_ARM_ALIGNMENT, sbgStreamBufferGetLinkedBuffer(&outputStream), sbgStreamBufferGetLength(&outputStream));
 
                //
                // Make sure that the command has been sent
                //
                if (errorCode == SBG_NO_ERROR)
                {
                        //
                        // Try to read the device answer for 500 ms
                        //
                        errorCode = sbgEComWaitForAck(pHandle, SBG_ECOM_CLASS_LOG_CMD_0, SBG_ECOM_CMD_GNSS_1_LEVER_ARM_ALIGNMENT, pHandle->cmdDefaultTimeOut);
 
                        //
                        // Test if we have received a valid ACK
                        //
                        if (errorCode == SBG_NO_ERROR)
                        {
                                //
                                // The command has been executed successfully so return
                                //
                                break;
                        }
                }
                else
                {
                        //
                        // We have a write error so exit the try loop
                        //
                        break;
                }
        }
        
        return errorCode;
}
 
SbgErrorCode sbgEComCmdGnss1InstallationGet(SbgEComHandle *pHandle, SbgEComGnssInstallation *pGnssInstallation)
{
        assert(pHandle);
        assert(pGnssInstallation);
 
        return sbgEComCmdGnssInstallationGet(pHandle, pGnssInstallation, SBG_ECOM_CMD_GNSS_1_INSTALLATION);
}
 
SbgErrorCode sbgEComCmdGnss1InstallationSet(SbgEComHandle *pHandle, const SbgEComGnssInstallation *pGnssInstallation)
{
        assert(pHandle);
        assert(pGnssInstallation);
 
        return sbgEComCmdGnssInstallationSet(pHandle, pGnssInstallation, SBG_ECOM_CMD_GNSS_1_INSTALLATION);
}
 
SbgErrorCode sbgEComCmdGnss1GetRejection(SbgEComHandle *pHandle, SbgEComGnssRejectionConf *pRejectConf)
{
        assert(pHandle);
        assert(pRejectConf);
 
        return sbgEComCmdGnssGetRejection(pHandle, pRejectConf, SBG_ECOM_CMD_GNSS_1_REJECT_MODES);
}
 
SbgErrorCode sbgEComCmdGnss1SetRejection(SbgEComHandle *pHandle, const SbgEComGnssRejectionConf *pRejectConf)
{
        assert(pHandle);
        assert(pRejectConf);
 
        return sbgEComCmdGnssSetRejection(pHandle, pRejectConf, SBG_ECOM_CMD_GNSS_1_REJECT_MODES);
}