Defines
#define	EEFC_ERROR_FLAGS (EEFC_FSR_FLOCKE \| EEFC_FSR_FCMDE)
#define	FWP_KEY 0x5Au
#define	READ_BUFF_ADDR0 IFLASH0_ADDR
#define	READ_BUFF_ADDR1 IFLASH1_ADDR
Functions
void	efc_disable_frdy_interrupt (Efc *p_efc)
	Disable the flash ready interrupt.
void	efc_enable_frdy_interrupt (Efc *p_efc)
	Enable the flash ready interrupt.
uint32_t	efc_get_flash_access_mode (Efc *p_efc)
	Get flash access mode.
uint32_t	efc_get_result (Efc *p_efc)
	Get the result of the last executed command.
uint32_t	efc_get_status (Efc *p_efc)
	Get the current status of the EEFC.
uint32_t	efc_get_wait_state (Efc *p_efc)
	Get flash wait state.
uint32_t	efc_init (Efc *p_efc, uint32_t ul_access_mode, uint32_t ul_fws)
	Initialize the EFC controller.
uint32_t	efc_perform_command (Efc *p_efc, uint32_t ul_command, uint32_t ul_argument)
	Perform the given command and wait until its completion (or an error).
uint32_t	efc_perform_fcr (Efc *p_efc, uint32_t ul_fcr)
	Perform command.
RAMFUNC uint32_t	efc_perform_read_sequence (Efc p_efc, uint32_t ul_cmd_st, uint32_t ul_cmd_sp, uint32_t p_ul_buf, uint32_t ul_size)
	Perform read sequence. Supported sequences are read Unique ID and read User Signature.
void	efc_set_flash_access_mode (Efc *p_efc, uint32_t ul_mode)
	Set flash access mode.
void	efc_set_wait_state (Efc *p_efc, uint32_t ul_fws)
	Set flash wait state.
void	efc_write_fmr (Efc *p_efc, uint32_t ul_fmr)
	Set mode register.

Detailed Description

The Enhanced Embedded Flash Controller ensures the interface of the Flash block with the 32-bit internal bus.

Define Documentation

#define EEFC_ERROR_FLAGS (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE)

Definition at line 75 of file efc.cpp.

#define FWP_KEY 0x5Au

Definition at line 68 of file efc.cpp.

#define READ_BUFF_ADDR0 IFLASH0_ADDR

Definition at line 64 of file efc.cpp.

#define READ_BUFF_ADDR1 IFLASH1_ADDR

Definition at line 65 of file efc.cpp.

Function Documentation

void efc_disable_frdy_interrupt ( Efc * p_efc )

Disable the flash ready interrupt.

Parameters:

p_efc Pointer to an EFC instance.

Definition at line 118 of file efc.cpp.

void efc_enable_frdy_interrupt ( Efc * p_efc )

Enable the flash ready interrupt.

Parameters:

p_efc Pointer to an EFC instance.

Definition at line 106 of file efc.cpp.

uint32_t efc_get_flash_access_mode ( Efc * p_efc )

Get flash access mode.

Parameters:

p_efc Pointer to an EFC instance.

Returns:: 0 for 128-bit or EEFC_FMR_FAM for 64-bit.

Definition at line 145 of file efc.cpp.

uint32_t efc_get_result ( Efc * p_efc )

Get the result of the last executed command.

Parameters:

p_efc Pointer to an EFC instance.

Returns:: The result of the last executed command.

Definition at line 230 of file efc.cpp.

uint32_t efc_get_status ( Efc * p_efc )

Get the current status of the EEFC.

Note:: This function clears the value of some status bits (FLOCKE, FCMDE).

Parameters:

p_efc Pointer to an EFC instance.

Returns:: The current status.

Definition at line 218 of file efc.cpp.

uint32_t efc_get_wait_state ( Efc * p_efc )

Get flash wait state.

Parameters:

p_efc Pointer to an EFC instance.

Returns:: The number of wait states in cycle (no shift).

Definition at line 170 of file efc.cpp.

uint32_t efc_init	(	Efc *	p_efc,
		uint32_t	ul_access_mode,
		uint32_t	ul_fws
	)

Initialize the EFC controller.

Parameters:

ul_access_mode	0 for 128-bit, EEFC_FMR_FAM for 64-bit.
ul_fws	The number of wait states in cycle (no shift).

Returns:: 0 if successful.

Definition at line 95 of file efc.cpp.

uint32_t efc_perform_command	(	Efc *	p_efc,
		uint32_t	ul_command,
		uint32_t	ul_argument
	)

Perform the given command and wait until its completion (or an error).

Note:: Unique ID commands are not supported, use efc_read_unique_id.

Parameters:

p_efc	Pointer to an EFC instance.
ul_command	Command to perform.
ul_argument	Optional command argument.

Note:: This function will automatically choose to use IAP function.

Returns:: 0 if successful, otherwise returns an error code.

Definition at line 188 of file efc.cpp.

RAMFUNC uint32_t efc_perform_fcr	(	Efc *	p_efc,
		uint32_t	ul_fcr
	)

Perform command.

Parameters:

p_efc	Pointer to an EFC instance.
ul_fcr	Flash command.

Returns:: The current status.

Definition at line 320 of file efc.cpp.

RAMFUNC uint32_t efc_perform_read_sequence	(	Efc *	p_efc,
		uint32_t	ul_cmd_st,
		uint32_t	ul_cmd_sp,
		uint32_t *	p_ul_buf,
		uint32_t	ul_size
	)

Perform read sequence. Supported sequences are read Unique ID and read User Signature.

Parameters:

p_efc	Pointer to an EFC instance.
ul_cmd_st	Start command to perform.
ul_cmd_sp	Stop command to perform.
p_ul_buf	Pointer to an data buffer.
ul_size	Buffer size.

Returns:: 0 if successful, otherwise returns an error code.

Definition at line 248 of file efc.cpp.

void efc_set_flash_access_mode	(	Efc *	p_efc,
		uint32_t	ul_mode
	)

Set flash access mode.

Parameters:

p_efc	Pointer to an EFC instance.
ul_mode	0 for 128-bit, EEFC_FMR_FAM for 64-bit.

Definition at line 131 of file efc.cpp.

void efc_set_wait_state	(	Efc *	p_efc,
		uint32_t	ul_fws
	)

Set flash wait state.

Parameters:

p_efc	Pointer to an EFC instance.
ul_fws	The number of wait states in cycle (no shift).

Definition at line 156 of file efc.cpp.

RAMFUNC void efc_write_fmr	(	Efc *	p_efc,
		uint32_t	ul_fmr
	)

Set mode register.

Parameters:

p_efc	Pointer to an EFC instance.
ul_fmr	Value of mode register

Definition at line 306 of file efc.cpp.

Defines

Functions

Detailed Description

Define Documentation

Function Documentation