A class for interfacing to an SCIP2.0-compliant Hokuyo laser device. More...

#include <hokuyo.h>

Public Member Functions
long long	calcLatency (bool intensity, double min_ang, double max_ang, int clustering=0, int skip=0, int num=0, int timeout=-1)
	Compute latency between actual hokuyo readings and system time.
void	clearLatency ()
	This method clears the offset that was computed with calcLatency.
void	close ()
	Close the port.
void	getConfig (LaserConfig &config)
	Retrieve the native hokuyo configuration.
std::string	getFirmwareVersion ()
	Return firmware version.
std::string	getID ()
	Return hokuyo serial number.
long long	getLatency ()
std::string	getProductName ()
	Return hokuyo product name.
std::string	getProtocolVersion ()
	Return hokuyo protocol version.
std::string	getStatus ()
	Get status message from the hokuyo.
std::string	getVendorName ()
	Return hokuyo vendor name.
bool	isIntensitySupported ()
	Tries to determine if intensity mode is supported.
	Laser ()
	Constructor.
int	laserFlush ()
	Wrapper around tcflush.
int	laserOff ()
	Turn the laser off.
int	laserOn ()
	Turn the laser on.
int	laserReadline (char *buf, int len, int timeout=-1)
	Read a full line from the hokuyo using fgets.
int	laserWrite (const char *msg)
	Wrapper around fputs.
void	open (const char *port_name)
	Open the port.
int	pollScan (LaserScan &scan, double min_ang, double max_ang, int clustering=0, int timeout=-1)
	Retrieve a single scan from the hokuyo.
bool	portOpen ()
	Check whether the port is open.
void	queryVersionInformation ()
uint64_t	readTime (int timeout=-1)
	Read in a time value.
int	requestScans (bool intensity, double min_ang, double max_ang, int clustering=0, int skip=0, int num=0, int timeout=-1)
	Request a sequence of scans from the hokuyo.
void	reset ()
	Reset the laser to its power on state.
int	sendCmd (const char *cmd, int timeout=-1)
int	serviceScan (LaserScan &scan, int timeout=-1)
	Retrieve a scan if they have been requested.
void	setToSCIP2 ()
	Sends an SCIP2.0 command to the hokuyo device.
int	stopScanning ()
	Stop retrieving scans.
	~Laser ()
	Destructor.
Private Member Functions
bool	checkSum (const char *buf, int buf_len)
	Compute the checksum of a given buffer.
long long int	getHokuyoClockOffset (int reps, int timeout=-1)
	Use the TM command to determine the offset between the PC clock and.
long long int	getHokuyoScanStampToSystemStampOffset (bool intensity, double min_ang, double max_ang, int clustering, int skip, int reps, int timeout=-1)
	Get reps scans and returns the median difference between the system.
char *	laserReadlineAfter (char buf, int len, const char str, int timeout=-1)
	Search for a particular sequence and then read the rest of the line.
void	querySensorConfig ()
	Query the sensor configuration of the hokuyo.
void	readData (LaserScan &scan, bool has_intensity, int timout=-1)
	Read in a scan.
Private Attributes
int	afrt_
int	amax_
int	amin_
int	ares_
int	dmax_
int	dmin_
std::string	firmware_version_
int	laser_fd_
unsigned int	last_time_
long long	offset_
std::string	product_name_
std::string	protocol_version_
int	rate_
char	read_buf [256]
int	read_buf_end
int	read_buf_start
std::string	serial_number_
unsigned int	time_repeat_count_
std::string	vendor_name_
int	wrapped_

Detailed Description

A class for interfacing to an SCIP2.0-compliant Hokuyo laser device.

Almost all methods of this class may throw an exception of type hokuyo::Exception in the event of an error when communicating with the device. This primarily include read/write problems (hokuyo::Exception), communication time-outs (hokuyo:TimeoutException), and corrupted data (hokuyo::CorruptedDataException). However, many methods which wrap commands that are sent to the hokuyo will return a hokuyo-supplied status code as well. These are not "exceptional," in that the device is operating correctly from a communication standpoint, although the return code may still indicate that the device has undergone some sort of failure. In these cases, return codes of 0 are normal operation. For more information on the possible device error codes, consult the hokuyo manual.

Definition at line 123 of file hokuyo.h.

Constructor & Destructor Documentation

hokuyo::Laser::Laser ( )

Constructor.

Definition at line 74 of file hokuyo.cpp.

hokuyo::Laser::~Laser ( )

Destructor.

Definition at line 87 of file hokuyo.cpp.

Member Function Documentation

long long hokuyo::Laser::calcLatency	(	bool	intensity,
		double	min_ang,
		double	max_ang,
		int	clustering = `0`,
		int	skip = `0`,
		int	num = `0`,
		int	timeout = `-1`
	)

Compute latency between actual hokuyo readings and system time.

This function will estimate the latency between when the data is actually acquired by the hokuyo and a read call returns from the hokuyo with the data. This latency is stored in an offset variable and applied to the measurement of system time which occurs immediately after a read. This means that the system_time_stamp variable on LaserScan struct is corrected and accurately reflects the exact time of the hokuyo data in computer system time. This function takes the same arguments as a call to request scans, since this latency may be parameter dependent. NOTE: This method will take approximately 10 seconds to return.

Parameters:

intensity	Whether or not intensity data should be provided
min_ang	Minimal angle of the scan (radians)
max_ang	Maximum angle of the scan (radians)
clustering	Number of adjascent ranges to be clustered into a single measurement
skip	Number of scans to skip between returning measurements
num	Number of times to repeat the measurement 0 for auto.
timeout	Timeout in milliseconds.

Returns:: Median latency in nanoseconds

Definition at line 1047 of file hokuyo.cpp.

bool hokuyo::Laser::checkSum	(	const char *	buf,
		int	buf_len
	)		`[private]`

Compute the checksum of a given buffer.

Definition at line 452 of file hokuyo.cpp.

void hokuyo::Laser::clearLatency ( ) [inline]

This method clears the offset that was computed with calcLatency.

Definition at line 286 of file hokuyo.h.

void hokuyo::Laser::close ( )

Close the port.

This call essentiall wraps fclose.

Definition at line 210 of file hokuyo.cpp.

void hokuyo::Laser::getConfig ( LaserConfig & config )

Retrieve the native hokuyo configuration.

This function will retrieve the native configuration for the laser. In particular, this specifies the smallest possible min, and largest possible maximum values that can be used.

Parameters:

config A reference to the LaserConfig which will be populated

Returns:: Status code returned from hokuyo device.

Definition at line 279 of file hokuyo.cpp.

std::string hokuyo::Laser::getFirmwareVersion ( )

Return firmware version.

Returns:: Firmware version of hokuyo.

Definition at line 919 of file hokuyo.cpp.

long long int hokuyo::Laser::getHokuyoClockOffset	(	int	reps,
		int	timeout = `-1`
	)		`[private]`

Use the TM command to determine the offset between the PC clock and.

Definition at line 998 of file hokuyo.cpp.

long long int hokuyo::Laser::getHokuyoScanStampToSystemStampOffset	(	bool	intensity,
		double	min_ang,
		double	max_ang,
		int	clustering,
		int	skip,
		int	reps,
		int	timeout = `-1`
	)		`[private]`

Get reps scans and returns the median difference between the system.

Definition at line 1019 of file hokuyo.cpp.

std::string hokuyo::Laser::getID ( )

Return hokuyo serial number.

Returns:: Serial number of hokuyo.

Definition at line 908 of file hokuyo.cpp.

long long hokuyo::Laser::getLatency ( ) [inline]

Returns the latency that is in use.

Returns:: Latency in nanoseconds.

Definition at line 293 of file hokuyo.h.

std::string hokuyo::Laser::getProductName ( )

Return hokuyo product name.

Returns:: Product name of hokuyo.

Definition at line 952 of file hokuyo.cpp.

std::string hokuyo::Laser::getProtocolVersion ( )

Return hokuyo protocol version.

Returns:: Protocol version of hokuyo.

Definition at line 930 of file hokuyo.cpp.

std::string hokuyo::Laser::getStatus ( )

Get status message from the hokuyo.

Returns:: Status message

Definition at line 963 of file hokuyo.cpp.

std::string hokuyo::Laser::getVendorName ( )

Return hokuyo vendor name.

Returns:: Vendor name of hokuyo.

Definition at line 941 of file hokuyo.cpp.

bool hokuyo::Laser::isIntensitySupported ( )

Tries to determine if intensity mode is supported.

Returns:: True if intensity mode is supported, false if it is not. hokuyo::Exception if no scan could be read even out of intensity mode.

Definition at line 767 of file hokuyo.cpp.

int hokuyo::Laser::laserFlush ( )

Wrapper around tcflush.

Definition at line 322 of file hokuyo.cpp.

int hokuyo::Laser::laserOff ( )

Turn the laser off.

Returns:: Status code returned from hokuyo device.

Definition at line 718 of file hokuyo.cpp.

int hokuyo::Laser::laserOn ( )

Turn the laser on.

Returns:: Status code returned from hokuyo device.

Definition at line 710 of file hokuyo.cpp.

int hokuyo::Laser::laserReadline	(	char *	buf,
		int	len,
		int	timeout = `-1`
	)

Read a full line from the hokuyo using fgets.

Definition at line 336 of file hokuyo.cpp.

char * hokuyo::Laser::laserReadlineAfter	(	char *	buf,
		int	len,
		const char *	str,
		int	timeout = `-1`
	)		`[private]`

Search for a particular sequence and then read the rest of the line.

Definition at line 393 of file hokuyo.cpp.

int hokuyo::Laser::laserWrite ( const char * msg )

Wrapper around fputs.

Definition at line 293 of file hokuyo.cpp.

void hokuyo::Laser::open ( const char * port_name )

Open the port.

This must be done before the hokuyo can be used. This call essentially wraps fopen, with some additional calls to tcsetattr.

Parameters:

port_name A character array containing the name of the port

Todo:: tcsetattr returns true if at least one attribute was set. Hence, we might not have set everything on success.

Definition at line 96 of file hokuyo.cpp.

int hokuyo::Laser::pollScan	(	hokuyo::LaserScan &	scan,
		double	min_ang,
		double	max_ang,
		int	clustering = `0`,
		int	timeout = `-1`
	)

Retrieve a single scan from the hokuyo.

Parameters:

scan	A reference to the LaserScan which will be populated
min_ang	Minimal angle of the scan
max_ang	Maximum angle of the scan
clustering	Number of adjascent ranges to be clustered into a single measurement.
timeout	Timeout in milliseconds.

Returns:: Status code returned from hokuyo device.

Definition at line 661 of file hokuyo.cpp.

bool hokuyo::Laser::portOpen ( ) [inline]

Check whether the port is open.

Definition at line 157 of file hokuyo.h.

void hokuyo::Laser::querySensorConfig ( ) [private]

Query the sensor configuration of the hokuyo.

Definition at line 414 of file hokuyo.cpp.

void hokuyo::Laser::queryVersionInformation ( )

Call VV and store the returned version information Use other methods to read the information.

Definition at line 870 of file hokuyo.cpp.

void hokuyo::Laser::readData	(	hokuyo::LaserScan &	scan,
		bool	has_intensity,
		int	timout = `-1`
	)		`[private]`

Read in a scan.

<

Todo:: , Should this be an Infinity Instead?

Definition at line 502 of file hokuyo.cpp.

uint64_t hokuyo::Laser::readTime ( int timeout = -1 )

Read in a time value.

Definition at line 467 of file hokuyo.cpp.

int hokuyo::Laser::requestScans	(	bool	intensity,
		double	min_ang,
		double	max_ang,
		int	clustering = `0`,
		int	skip = `0`,
		int	num = `0`,
		int	timeout = `-1`
	)

Request a sequence of scans from the hokuyo.

This function will request a sequence of scans from the hokuyo. If indefinite scans are requested, stop_scanning() must be called to terminate scanning. Service_scan() must be called repeatedly to receive scans as they come in.

Parameters:

intensity	Whether or not intensity data should be provided
min_ang	Minimal angle of the scan (radians)
max_ang	Maximum angle of the scan (radians)
clustering	Number of adjascent ranges to be clustered into a single measurement
skip	Number of scans to skip between returning measurements
num	Number of scans to return (0 for indefinite)
timeout	Timeout in milliseconds.

Returns:: Status code returned from hokuyo device.

Todo:: check that values are within range?

Definition at line 738 of file hokuyo.cpp.

void hokuyo::Laser::reset ( )

Reset the laser to its power on state.

This calls TM2 and RS. Exceptions raised by TM2 are ignored as they are normal in the case where the laser is scanning. Exceptions raised by RS are passed back to the caller.

Definition at line 184 of file hokuyo.cpp.

int hokuyo::Laser::sendCmd	(	const char *	cmd,
		int	timeout = `-1`
	)

This function allows commands to be sent directly to the hokuyo. Possible commands can be found in the hokuyo documentation. It will only read up until the end of the status code. Any additional bytes will be left on the line for parsing.

Parameters: