You're reading the documentation for an older, but still supported, version of ROS 2. For information on the latest version, please have a look at Jazzy.

Release Track

What is a Track?

Bloom requires the user to enter configuration information when releasing packages for the first time. It is beneficial to store such configurations in the release repository so we don’t have to manually enter configurations that won’t change for subsequent releases.

Since some of the configurations will differ when releasing the package for different ROS distributions, bloom uses release tracks to store the configurations for releasing per distribution. By convention you should create tracks with the same name as the ROS distro you are releasing for.

All release track configurations are stored in tracks.yaml on the master branch of your release repository.

Track Configurations

Track configurations are explained in more detail along with the prompts from bloom.

Release Repository url

This is the url of your release repository, and should be of form https://github.com/ros2-gbp/my_repo-release.git if your release repository is hosted on ros2-gbp.

No reasonable default release repository url could be determined from previous releases.
Release repository url [press enter to abort]:

Paste your release repository URL and press Enter.

Bloom may additionally ask you about initializing the new repository, as following:

Freshly initialized git repository detected.
An initial empty commit is going to be made.
Continue [Y/n]?

Simply press Enter to accept the default of yes.

Repository Name

The repository name is trivial, but it is recommended to set this to the name of your project.

Repository Name:
   upstream
      Default value, leave this as upstream if you are unsure
   <name>
      Name of the repository (used in the archive name)
   ['upstream']:

Type the name of your project (eg. my_project) and press Enter.

Upstream Repository URI

The upstream repository is the repository where your source code is. This is most likely an https link to your project hosted on a git hosting service such as GitHub or GitLab.

Upstream Repository URI:
   <uri>
      Any valid URI. This variable can be templated, for example an svn url
      can be templated as such: "https://svn.foo.com/foo/tags/foo-:{version}"
      where the :{version} token will be replaced with the version for this release.
   [None]:

Make sure you use the https address (eg. https://github.com/my_organization/my_repo.git) and not the ssh address.

Upstream VCS Type

This is the Upstream Repository URI’s version control system (VCS) type. You must specify the type of vcs your repository is using, from svn, git, hg or tar.

Upstream VCS Type:
   svn
      Upstream URI is a svn repository
   git
      Upstream URI is a git repository
   hg
      Upstream URI is a hg repository
   tar
      Upstream URI is a tarball
   ['git']:

Most repositories will be using git, but some legacy repositories might be using hg or svn.

Version

This is the version of the package you are releasing. (eg. 1.0.3)

Version:
   :{ask}
      This means that the user will be prompted for the version each release.
      This also means that the upstream devel will be ignored.
   :{auto}
      This means the version will be guessed from the devel branch.
      This means that the devel branch must be set, the devel branch must exist,
      and there must be a valid package.xml in the upstream devel branch.
   <version>
      This will be the version used.
      It must be updated for each new upstream version.
   [':{auto}']:

Setting this to :{auto} (the default, and recommended setup) will automatically determine the version from the devel branch’s package.xml.

Setting this to :{ask} will bring up a prompt asking for the version every time you run a release with bloom.

Release Tag

The Release Tag refers to which tag or branch you want to import the code from.

Release Tag:
   :{version}
      This means that the release tag will match the :{version} tag.
      This can be further templated, for example: "foo-:{version}" or "v:{version}"

      This can describe any vcs reference. For git that means {tag, branch, hash},
      for hg that means {tag, branch, hash}, for svn that means a revision number.
      For tar this value doubles as the sub directory (if the repository is
      in foo/ of the tar ball, putting foo here will cause the contents of
      foo/ to be imported to upstream instead of foo itself).
   :{ask}
      This means the user will be prompted for the release tag on each release.
   :{none}
      For svn and tar only you can set the release tag to :{none}, so that
      it is ignored.  For svn this means no revision number is used.
   [':{version}']:

Setting this to :{version} (the default, and recommended setup) will make the release tag match the version tag.

A less common setup is to set this to a branch name to always pull in that branch at the time of release from the upstream project.

Alternatively, if you want to be prompted to enter a different tag every time you do a release, enter :{ask}. :{ask} is useful if the upstream project has frequent tagged releases and you want to refer to the new tag every time you’re releasing.

Upstream Devel Branch

The upstream devel branch is the name of the branch in your upstream repository. If you use separate branches for each ROS distribution, this field would be different for each release track. It is used to determine the version of the package you are releasing when Version is set to :{auto}.

Upstream Devel Branch:
   <vcs reference>
      Branch in upstream repository on which to search for the version.
      This is used only when version is set to ':{auto}'.
   [None]:

To release from a branch called humble, enter humble. Leaving this as None would result in the version being determined from the default branch of your repository (this is not recommended).

ROS Distro

This is the distribution you’re planning on releasing the package into.

ROS Distro:
   <ROS distro>
      This can be any valid ROS distro, e.g. indigo, kinetic, lunar, melodic
   ['indigo']:

If you plan on releasing into ROS humble, enter humble.

Patches Directory

This is the directory where any additional patches to the releases are.

Patches Directory:
   <path in bloom branch>
      This can be any valid relative path in the bloom branch. The contents
      of this folder will be overlaid onto the upstream branch after each
      import-upstream.  Additionally, any package.xml files found in the
      overlay will have the :{version} string replaced with the current
      version being released.
   :{none}
      Use this if you want to disable overlaying of files.
   [None]:

Adding additional patches to a release is a rarely used feature. For almost all packages, this should be left as the default None.

Release Repository Push URL

Release Repository Push URL:
   :{none}
      This indicates that the default release url should be used.
   <url>
      (optional) Used when pushing to remote release repositories. This is only
      needed when the release uri which is in the rosdistro file is not writable.
      This is useful, for example, when a releaser would like to use a ssh url
      to push rather than a https:// url.
   [None]:

Can be left as the default in most cases.