airbourne/airbourne/examples/rc_ppm/main.cpp
Go to the documentation of this file.
1 /*
2  * Copyright (c) 2017, James Jackson
3  *
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *
9  * * Redistributions of source code must retain the above copyright notice, this
10  * list of conditions and the following disclaimer.
11  *
12  * * Redistributions in binary form must reproduce the above copyright notice,
13  * this list of conditions and the following disclaimer in the documentation
14  * and/or other materials provided with the distribution.
15  *
16  * * Neither the name of the copyright holder nor the names of its
17  * contributors may be used to endorse or promote products derived from
18  * this software without specific prior written permission.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
23  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
24  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
25  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
26  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
27  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
28  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
29  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
30  */
31 
32 /* Includes */
33 #include "system.h"
34 #include "vcp.h"
35 #include "printf.h"
36 #include "rc_ppm.h"
37 #include "led.h"
38 
40 
41 static void _putc(void *p, char c)
42 {
43  (void)p; // avoid compiler warning about unused variable
44  uartPtr->put_byte(c);
45 }
46 
47 int main() {
48 
49  systemInit();
50 
51  VCP vcp;
52  vcp.init();
53  uartPtr = &vcp;
55 
56  LED warn;
57  warn.init(LED1_GPIO, LED1_PIN);
58  LED info;
59  info.init(LED2_GPIO, LED2_PIN);
60 
61  RC_PPM rc;
62 
63  rc.init(&pwm_config[10]);
64 
65  while(1)
66  {
67  if (rc.lost())
68  {
69  info.off();
70  warn.on();
71  printf("rc lost\n");
72  }
73  else
74  {
75  warn.off();
76  info.on();
77  for (int i = 0; i < 8; i++)
78  {
79  float val = rc.read(i);
80  printf("%d.%d\t", (int32_t)((1000*val)/1000), ((int32_t)(1000*val)%1000));
81  }
82  printf("\n");
83  }
84  delay(20);
85  }
86 }
void systemInit(void)
Definition: system.c:55
#define printf
Definition: printf.h:119
void init(const pwm_hardware_struct_t *conf)
Definition: rc_ppm.cpp:37
bool lost()
Definition: rc_ppm.cpp:98
void init(GPIO_TypeDef *gpio_port, uint16_t pin)
Definition: led.cpp:34
#define LED2_PIN
Definition: revo_f4.h:134
Definition: rc_ppm.h:37
void init()
Definition: vcp.cpp:24
#define LED2_GPIO
Definition: revo_f4.h:133
Definition: led.h:38
#define LED1_GPIO
Definition: revo_f4.h:131
#define LED1_PIN
Definition: revo_f4.h:132
static void _putc(void *p, char c)
const pwm_hardware_struct_t pwm_config[PWM_NUM_CHANNELS]
Definition: revo_f4.h:149
void put_byte(uint8_t ch) override
Definition: vcp.cpp:106
void on()
Definition: led.cpp:39
Definition: vcp.h:20
void init_printf(void *putp, void(*putf)(void *, char))
Definition: printf.cpp:245
#define NULL
Definition: usbd_def.h:50
float read(uint8_t channel)
Definition: rc_ppm.cpp:93
void off()
Definition: led.cpp:44
void delay(uint32_t ms)
Definition: system.c:98


rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Thu Oct 24 2019 03:17:18