#include <pr2_base_controller2.h>

Inheritance diagram for controller::Pr2BaseController2:

Public Member Functions
geometry_msgs::Twist	getCommand ()
	Returns the current position command.
bool	init (pr2_mechanism_model::RobotState *robot, ros::NodeHandle &n)
	Pr2BaseController2 ()
	Default Constructor of the Pr2BaseController2 class.
void	setCommand (const geometry_msgs::Twist &cmd_vel)
void	setDesiredCasterSteer ()
	set the desired caster steer
void	setJointCommands ()
	set the joint commands
void	starting ()
void	update ()
	(a) Updates commands to caster and wheels. Called every timestep in realtime
	~Pr2BaseController2 ()
	Destructor of the Pr2BaseController2 class.
Public Attributes
BaseKinematics	base_kinematics_
	class where the robot's information is computed and stored
pthread_mutex_t	pr2_base_controller_lock_
	mutex lock for setting and getting commands
Private Member Functions
void	commandCallback (const geometry_msgs::TwistConstPtr &msg)
	deal with Twist commands
void	computeDesiredCasterSteer (const double &dT)
	computes the desired caster speeds given the desired base speed
void	computeDesiredWheelSpeeds (const double &dT)
	computes the desired wheel speeds given the desired base speed
void	computeJointCommands (const double &dT)
	computes the desired caster steers and wheel speeds
geometry_msgs::Twist	interpolateCommand (const geometry_msgs::Twist &start, const geometry_msgs::Twist &end, const geometry_msgs::Twist &max_rate, const double &dT)
	interpolates velocities within a given time based on maximum accelerations
void	publishState (const ros::Time &current_time)
	Publish the state.
void	setDesiredWheelSpeeds ()
	sends the desired wheel speeds to the wheel controllers
void	updateJointControllers ()
	tells the wheel and caster controllers to update their speeds
Private Attributes
double	alpha_stall_
	low pass filter value used for finding stalls
geometry_msgs::Twist	base_vel_msg_
	callback message, used to remember where the base is commanded to go
std::vector< boost::shared_ptr < JointVelocityController > >	caster_controller_
	vector that stores the caster controllers
std::vector< control_toolbox::Pid >	caster_position_pid_
	The pid controllers for caster position.
filters::MultiChannelTransferFunctionFilter < double >	caster_vel_filter_
ros::Time	cmd_received_timestamp_
	timestamp corresponding to when the command received by the node
ros::Subscriber	cmd_sub_
ros::Subscriber	cmd_sub_deprecated_
geometry_msgs::Twist	cmd_vel_
	speed command vector used internally to represent the current commanded speed
double	cmd_vel_rot_eps_
	minimum rotational velocity value allowable
geometry_msgs::Twist	cmd_vel_t_
	Input speed command vector represents the desired speed requested by the node. Note that this may differ from the current commanded speed due to acceleration limits imposed by the controller.
double	cmd_vel_trans_eps_
	minimum tranlational velocity value allowable
geometry_msgs::Twist	desired_vel_
	Input speed command vector represents the desired speed requested by the node.
double	eps_
	generic epsilon value that is used as a minimum or maximum allowable input value
std::vector< double >	filtered_velocity_
std::vector< double >	filtered_wheel_velocity_
double	kp_caster_steer_
	local gain used for speed control of the caster (to achieve resultant position control)
ros::Time	last_publish_time_
	Time interval between state publishing.
ros::Time	last_time_
	time corresponding to when update was last called
geometry_msgs::Twist	max_accel_
	acceleration limits specified externally
double	max_rotational_velocity_
	maximum rotational velocity magnitude allowable
double	max_translational_velocity_
	maximum translational velocity magnitude allowable
geometry_msgs::Twist	max_vel_
	velocity limits specified externally
bool	new_cmd_available_
	true when new command received by node
ros::NodeHandle	node_
bool	publish_state_
ros::NodeHandle	root_handle_
double	state_publish_rate_
double	state_publish_time_
	Time interval between state publishing.
boost::scoped_ptr < realtime_tools::RealtimePublisher < pr2_mechanism_controllers::BaseControllerState2 > >	state_publisher_
	publishes information about the caster and wheel controllers
double	timeout_
	timeout specifying time that the controller waits before setting the current velocity command to zero
std::vector< boost::shared_ptr < JointVelocityController > >	wheel_controller_
	vector that stores the wheel controllers
std::vector< control_toolbox::Pid >	wheel_pid_controllers_
	The pid controllers for caster position.
filters::MultiChannelTransferFunctionFilter < double >	wheel_vel_filter_

Detailed Description

Definition at line 55 of file pr2_base_controller2.h.

Constructor & Destructor Documentation

controller::Pr2BaseController2::Pr2BaseController2 ( )

Default Constructor of the Pr2BaseController2 class.

Definition at line 47 of file pr2_base_controller2.cpp.

controller::Pr2BaseController2::~Pr2BaseController2 ( )

Destructor of the Pr2BaseController2 class.

Definition at line 68 of file pr2_base_controller2.cpp.

Member Function Documentation

void controller::Pr2BaseController2::commandCallback ( const geometry_msgs::TwistConstPtr & msg ) [private]

deal with Twist commands

Definition at line 494 of file pr2_base_controller2.cpp.

void controller::Pr2BaseController2::computeDesiredCasterSteer ( const double & dT ) [private]

computes the desired caster speeds given the desired base speed

Definition at line 381 of file pr2_base_controller2.cpp.

void controller::Pr2BaseController2::computeDesiredWheelSpeeds ( const double & dT ) [private]

computes the desired wheel speeds given the desired base speed

Definition at line 437 of file pr2_base_controller2.cpp.

void controller::Pr2BaseController2::computeJointCommands ( const double & dT ) [private]

computes the desired caster steers and wheel speeds

Definition at line 365 of file pr2_base_controller2.cpp.

geometry_msgs::Twist controller::Pr2BaseController2::getCommand ( )

Returns the current position command.

Returns:: Current velocity command

Definition at line 260 of file pr2_base_controller2.cpp.

bool controller::Pr2BaseController2::init	(	pr2_mechanism_model::RobotState *	robot,
		ros::NodeHandle &	n
	)		`[virtual]`

Implements pr2_controller_interface::Controller.

Definition at line 74 of file pr2_base_controller2.cpp.

geometry_msgs::Twist controller::Pr2BaseController2::interpolateCommand	(	const geometry_msgs::Twist &	start,
		const geometry_msgs::Twist &	end,
		const geometry_msgs::Twist &	max_rate,
		const double &	dT
	)		`[private]`

interpolates velocities within a given time based on maximum accelerations

Definition at line 221 of file pr2_base_controller2.cpp.

void controller::Pr2BaseController2::publishState ( const ros::Time & current_time ) [private]

Publish the state.

Definition at line 324 of file pr2_base_controller2.cpp.

void controller::Pr2BaseController2::setCommand ( const geometry_msgs::Twist & cmd_vel )

Definition at line 188 of file pr2_base_controller2.cpp.

void controller::Pr2BaseController2::setDesiredCasterSteer ( )

set the desired caster steer

Definition at line 429 of file pr2_base_controller2.cpp.

void controller::Pr2BaseController2::setDesiredWheelSpeeds ( ) [private]

sends the desired wheel speeds to the wheel controllers

Definition at line 478 of file pr2_base_controller2.cpp.

void controller::Pr2BaseController2::setJointCommands ( )

set the joint commands

Definition at line 374 of file pr2_base_controller2.cpp.

void controller::Pr2BaseController2::starting ( ) [virtual]

Reimplemented from pr2_controller_interface::Controller.

Definition at line 271 of file pr2_base_controller2.cpp.

void controller::Pr2BaseController2::update ( void ) [virtual]

(a) Updates commands to caster and wheels. Called every timestep in realtime

Implements pr2_controller_interface::Controller.

Definition at line 285 of file pr2_base_controller2.cpp.

void controller::Pr2BaseController2::updateJointControllers ( ) [private]

tells the wheel and caster controllers to update their speeds

Definition at line 486 of file pr2_base_controller2.cpp.

Member Data Documentation

double controller::Pr2BaseController2::alpha_stall_ [private]

low pass filter value used for finding stalls

Definition at line 192 of file pr2_base_controller2.h.

BaseKinematics controller::Pr2BaseController2::base_kinematics_

class where the robot's information is computed and stored

Returns:: BaseKinematic instance that is being used by this controller

Definition at line 95 of file pr2_base_controller2.h.

geometry_msgs::Twist controller::Pr2BaseController2::base_vel_msg_ [private]

callback message, used to remember where the base is commanded to go

Definition at line 247 of file pr2_base_controller2.h.

std::vector<boost::shared_ptr<JointVelocityController> > controller::Pr2BaseController2::caster_controller_ [private]

vector that stores the caster controllers

Definition at line 202 of file pr2_base_controller2.h.

std::vector<control_toolbox::Pid> controller::Pr2BaseController2::caster_position_pid_ [private]

The pid controllers for caster position.

Definition at line 285 of file pr2_base_controller2.h.

filters::MultiChannelTransferFunctionFilter<double> controller::Pr2BaseController2::caster_vel_filter_ [private]

Definition at line 287 of file pr2_base_controller2.h.

ros::Time controller::Pr2BaseController2::cmd_received_timestamp_ [private]

timestamp corresponding to when the command received by the node

Definition at line 146 of file pr2_base_controller2.h.

ros::Subscriber controller::Pr2BaseController2::cmd_sub_ [private]

Definition at line 124 of file pr2_base_controller2.h.

ros::Subscriber controller::Pr2BaseController2::cmd_sub_deprecated_ [private]

Definition at line 126 of file pr2_base_controller2.h.

geometry_msgs::Twist controller::Pr2BaseController2::cmd_vel_ [private]

speed command vector used internally to represent the current commanded speed

Definition at line 157 of file pr2_base_controller2.h.

double controller::Pr2BaseController2::cmd_vel_rot_eps_ [private]

minimum rotational velocity value allowable

Definition at line 257 of file pr2_base_controller2.h.

geometry_msgs::Twist controller::Pr2BaseController2::cmd_vel_t_ [private]

Input speed command vector represents the desired speed requested by the node. Note that this may differ from the current commanded speed due to acceleration limits imposed by the controller.

Definition at line 152 of file pr2_base_controller2.h.

double controller::Pr2BaseController2::cmd_vel_trans_eps_ [private]

minimum tranlational velocity value allowable

Definition at line 272 of file pr2_base_controller2.h.

geometry_msgs::Twist controller::Pr2BaseController2::desired_vel_ [private]

Input speed command vector represents the desired speed requested by the node.

Definition at line 162 of file pr2_base_controller2.h.

double controller::Pr2BaseController2::eps_ [private]

generic epsilon value that is used as a minimum or maximum allowable input value

Definition at line 252 of file pr2_base_controller2.h.

std::vector<double> controller::Pr2BaseController2::filtered_velocity_ [private]

Definition at line 289 of file pr2_base_controller2.h.