Public Member Functions | Public Attributes | Protected Member Functions | Protected Attributes
sba::SysSBA Class Reference

SysSBA holds a set of nodes and points for sparse bundle adjustment. More...

#include <sba.h>

List of all members.

Public Member Functions

bool addMonoProj (int ci, int pi, Eigen::Vector2d &q)
 Add a projection between point and camera, in setting up the system.
int addNode (Eigen::Matrix< double, 4, 1 > &trans, Eigen::Quaternion< double > &qrot, const fc::CamParams &cp, bool isFixed=false)
 Adds a node to the system.
int addPoint (Point p)
 Adds a point to the system.
void addPointPlaneMatch (int ci0, int pi0, Eigen::Vector3d normal0, int ci1, int pi1, Eigen::Vector3d normal1)
 Adds a pair of point-plane projection matches. Assumes the points have already been added to the system with point-to-point projections; this just takes care of the forward and backward point-to-plane projections.
bool addProj (int ci, int pi, Eigen::Vector3d &q, bool stereo=true)
 Add a projection between point and camera, in setting up the system.
bool addStereoProj (int ci, int pi, Eigen::Vector3d &q)
 Add a projection between point and camera, in setting up the system.
double calcAvgError ()
 Calculates average cost of the system.
double calcCost ()
 Calculate the total cost of the system by adding the squared error over all projections.
double calcCost (double dist)
 Calculates total cost of the system, not counting projections with errors higher than <dist>.
double calcRMSCost (double dist=10000.0)
 Calculates total RMS cost of the system, not counting projections with errors higher than <dist>.
int countBad (double dist)
 Find number of projections with errors over a certain value.
int countProjs ()
 Return total number of projections.
int doSBA (int niter, double lambda=1.0e-4, int useCSparse=0, double initTol=1.0e-8, int maxCGiters=100)
void mergeTracks (std::vector< std::pair< int, int > > &prs)
 merge tracks based on identity pairs
int mergeTracksSt (int tr0, int tr1)
 merge two tracks if possible (no conflicts)
int numBadPoints ()
 Find number of points with Z < 0 (projected behind the camera).
void printStats ()
 Print some system stats.
int reduceLongTracks (double pct)
 get rid of long tracks
int reduceTracks ()
 Reduce tracks by eliminating single tracks and invalid projections.
int remExcessTracks (int minpts)
 removes tracks that aren't needed
int removeBad (double dist)
 Remove projections with too high of an error.
void setConnMat (int minpts)
void setConnMatReduced (int maxconns)
 sets up connectivity matrix by greedy spanning tree
void setProjCovariance (int ci, int pi, Eigen::Matrix3d &covar)
 Sets the covariance matrix of a projection.
void setupSparseSys (double sLambda, int iter, int sparseType)
void setupSys (double sLambda)
 SysSBA ()
 Default constructor.
void updateNormals ()
 Update normals in point-plane matches, if any.
void useCholmod (bool yes)
 use CHOLMOD or CSparse

Public Attributes

Eigen::MatrixXd A
 linear system matrix and vector
Eigen::VectorXd B
std::vector< std::vector< bool > > connMat
CSparse csp
double huber
 Huber parameter; greater than 0.0 for Huber weighting of cost.
double lambda
int nFixed
 Number of fixed nodes (nodes with known poses) from the first node.
std::vector< Node,
Eigen::aligned_allocator< Node > > 
nodes
 Set of nodes (camera frames) for SBA system, indexed by node number.
double sqMinDelta
 Convergence bound (square of minimum acceptable delta change)
long long t0
long long t1
long long t2
long long t3
long long t4
std::vector< Track,
Eigen::aligned_allocator
< Track > > 
tracks
 Set of tracks for each point P (projections onto camera frames).
bool useLocalAngles
 local or global angle coordinates
EIGEN_MAKE_ALIGNED_OPERATOR_NEW int verbose
 How much information to print to console.

Protected Member Functions

vector< map< int, int > > generateConns_ ()
void tsplit (int tri, int len)
 Split a track into random tracks. (What is len?)

Protected Attributes

std::vector< JacobProds,
Eigen::aligned_allocator
< JacobProds > > 
jps
 storage for Jacobian products
std::vector< Point,
Eigen::aligned_allocator
< Point > > 
oldpoints
 Storage for old points, for checking LM step and reverting.
std::vector< Eigen::Vector3d,
Eigen::aligned_allocator
< Eigen::Vector3d > > 
tps
 variables for each track

Detailed Description

SysSBA holds a set of nodes and points for sparse bundle adjustment.

Definition at line 75 of file sba.h.


Constructor & Destructor Documentation

sba::SysSBA::SysSBA ( ) [inline]

Default constructor.

Definition at line 85 of file sba.h.


Member Function Documentation

bool sba::SysSBA::addMonoProj ( int  ci,
int  pi,
Eigen::Vector2d &  q 
)

Add a projection between point and camera, in setting up the system.

Parameters:
cicamera/node index (same as in nodes structure).
pipoint index (same as in tracks structure).
qthe keypoint of the projection in image coordinates as u,v,u-d.
Returns:
whether the projection was added (true) or not (false). Should only fail if the projection is a duplicate of an existing one with a different keypoint (i.e., same point projected to 2 locations in an image).

Definition at line 145 of file sba.cpp.

int sba::SysSBA::addNode ( Eigen::Matrix< double, 4, 1 > &  trans,
Eigen::Quaternion< double > &  qrot,
const fc::CamParams cp,
bool  isFixed = false 
)

Adds a node to the system.

Parameters:
transA 4x1 vector of translation of the camera.
qrotA Quaternion containing the rotatin of the camera.
cpCamera parameters containing the K parameters, including baseline and other camera parameters.
isFixedWhether this camera is fixed in space or not, for sba.
Returns:
the index of the node added.

Definition at line 83 of file sba.cpp.

int sba::SysSBA::addPoint ( Point  p)

Adds a point to the system.

Parameters:
pA point (4x1 Eigen Vector).
Returns:
the index of the point added.

Definition at line 104 of file sba.cpp.

void sba::SysSBA::addPointPlaneMatch ( int  ci0,
int  pi0,
Eigen::Vector3d  normal0,
int  ci1,
int  pi1,
Eigen::Vector3d  normal1 
)

Adds a pair of point-plane projection matches. Assumes the points have already been added to the system with point-to-point projections; this just takes care of the forward and backward point-to-plane projections.

Parameters:
ci0Camera index of the first point in the match.
pi0Point index of the first point in the match.
normal03D normal for the first point in camera0's coordinate frame.
ci1Camera index of the second point in the match.
pi1Point index of the second point in the match.
normal13D normal for the second point in camera1's coordinate frame.

Definition at line 191 of file sba.cpp.

bool sba::SysSBA::addProj ( int  ci,
int  pi,
Eigen::Vector3d &  q,
bool  stereo = true 
)

Add a projection between point and camera, in setting up the system.

Parameters:
cicamera/node index (same as in nodes structure).
pipoint index (same as in tracks structure).
qthe keypoint of the projection in image coordinates as u,v,u-d.
stereowhether the point is stereo or not (true is stereo, false is monocular).
Returns:
whether the projection was added (true) or not (false). Should only fail if the projection is a duplicate of an existing one with a different keypoint (i.e., same point projected to 2 locations in an image).

Definition at line 115 of file sba.cpp.

bool sba::SysSBA::addStereoProj ( int  ci,
int  pi,
Eigen::Vector3d &  q 
)

Add a projection between point and camera, in setting up the system.

Parameters:
cicamera/node index (same as in nodes structure).
pipoint index (same as in tracks structure).
qthe keypoint of the projection in image coordinates as u,v,u-d.
Returns:
whether the projection was added (true) or not (false). Should only fail if the projection is a duplicate of an existing one with a different keypoint (i.e., same point projected to 2 locations in an image).

Definition at line 160 of file sba.cpp.

Calculates average cost of the system.

Returns:
Average error of the system over all projections, in pixels.

Definition at line 365 of file sba.cpp.

Calculate the total cost of the system by adding the squared error over all projections.

Returns:
Total error of the system, in pixels^2.

Definition at line 289 of file sba.cpp.

double sba::SysSBA::calcCost ( double  dist)

Calculates total cost of the system, not counting projections with errors higher than <dist>.

Parameters:
distDistance, in pixels^2, above which projections are considered outliers.
Returns:
Total error of the system, in pixels^2.

Definition at line 310 of file sba.cpp.

double sba::SysSBA::calcRMSCost ( double  dist = 10000.0)

Calculates total RMS cost of the system, not counting projections with errors higher than <dist>.

Parameters:
distRMS distance, in pixels, above which projections are considered outliers.
Returns:
Total RMS error of the system, in pixels.

Definition at line 336 of file sba.cpp.

int sba::SysSBA::countBad ( double  dist)

Find number of projections with errors over a certain value.

Definition at line 417 of file sba.cpp.

Return total number of projections.

Definition at line 275 of file sba.cpp.

int sba::SysSBA::doSBA ( int  niter,
double  sLambda = 1.0e-4,
int  useCSparse = 0,
double  initTol = 1.0e-8,
int  maxCGiter = 100 
)

do LM solution for system; returns number of iterations on finish. Argument is max number of iterations to perform. <lambda> is the LM diagonal factor <useCSparse> is one of SBA_DENSE_CHOLESKY, SBA_SPARSE_CHOLESKY, SBA_GRADIENT, SBA_BLOCK_JACOBIAN_PCG initTol is the initial tolerance for CG iterations

Run the LM algorithm that computes a nonlinear SBA estimate. <niter> is the max number of iterations to perform; returns the number actually performed. <useCSparse> = 0 for dense Cholesky, 1 for sparse system, 2 for gradient system, 3 for block jacobian PCG <initTol> is the initial tolerance for CG

Definition at line 1312 of file sba.cpp.

vector< map< int, int > > sba::SysSBA::generateConns_ ( ) [protected]

Generate a connections map, used for setConnMat() and setConnMatReduced().

Definition at line 659 of file sba.cpp.

void sba::SysSBA::mergeTracks ( std::vector< std::pair< int, int > > &  prs)

merge tracks based on identity pairs

merge tracks based on identity pairs this can be expensive

Definition at line 1592 of file sba.cpp.

int sba::SysSBA::mergeTracksSt ( int  tri0,
int  tri1 
)

merge two tracks if possible (no conflicts)

merge 2 tracks leave 2nd track null; eventually need to clean up null tracks returns merged track index if successful, -1 if tracks are redundant (same cam found on both with different keypts)

Definition at line 1660 of file sba.cpp.

Find number of points with Z < 0 (projected behind the camera).

Definition at line 389 of file sba.cpp.

Print some system stats.

Definition at line 505 of file sba.cpp.

int sba::SysSBA::reduceLongTracks ( double  pct)

get rid of long tracks

Definition at line 867 of file sba.cpp.

Reduce tracks by eliminating single tracks and invalid projections.

Definition at line 472 of file sba.cpp.

int sba::SysSBA::remExcessTracks ( int  minpts)

removes tracks that aren't needed

Definition at line 950 of file sba.cpp.

int sba::SysSBA::removeBad ( double  dist)

Remove projections with too high of an error.

Returns:
Number of projections removed.

Definition at line 446 of file sba.cpp.

void sba::SysSBA::setConnMat ( int  minpts)

Sets up the connectivity matrix by clearing connections with less than minpts.

Definition at line 720 of file sba.cpp.

void sba::SysSBA::setConnMatReduced ( int  maxconns)

sets up connectivity matrix by greedy spanning tree

Definition at line 768 of file sba.cpp.

void sba::SysSBA::setProjCovariance ( int  ci,
int  pi,
Eigen::Matrix3d &  covar 
)

Sets the covariance matrix of a projection.

Parameters:
cicamera/node index (same as in nodes structure).
pipoint index (same as in tracks structure).
covar3x3 covariance matrix that affects the cost of the projection. Instead of the cost being ||err||, the cost is now (err)T*covar*(err).

Definition at line 184 of file sba.cpp.

void sba::SysSBA::setupSparseSys ( double  sLambda,
int  iter,
int  sparseType 
)

Definition at line 1165 of file sba.cpp.

void sba::SysSBA::setupSys ( double  sLambda)

Definition at line 1051 of file sba.cpp.

void sba::SysSBA::tsplit ( int  tri,
int  len 
) [protected]

Split a track into random tracks. (What is len?)

Definition at line 815 of file sba.cpp.

Update normals in point-plane matches, if any.

Definition at line 239 of file sba.cpp.

void sba::SysSBA::useCholmod ( bool  yes) [inline]

use CHOLMOD or CSparse

Definition at line 265 of file sba.h.


Member Data Documentation

Eigen::MatrixXd sba::SysSBA::A

linear system matrix and vector

Definition at line 240 of file sba.h.

Eigen::VectorXd sba::SysSBA::B

Definition at line 241 of file sba.h.

std::vector<std::vector<bool> > sba::SysSBA::connMat

sparse connectivity matrix for each node, holds vector of connecting nodes "true" for don't use connection

Definition at line 246 of file sba.h.

sparse matrix object putting this at the end gets rid of alignment errors when making SBA objects

Definition at line 270 of file sba.h.

Huber parameter; greater than 0.0 for Huber weighting of cost.

Definition at line 113 of file sba.h.

std::vector<JacobProds, Eigen::aligned_allocator<JacobProds> > sba::SysSBA::jps [protected]

storage for Jacobian products

Definition at line 288 of file sba.h.

set up linear system, from Engels and Nister 2006; <sLambda> is the diagonal augmentation for the LM step

Definition at line 148 of file sba.h.

Number of fixed nodes (nodes with known poses) from the first node.

Definition at line 92 of file sba.h.

std::vector<Node, Eigen::aligned_allocator<Node> > sba::SysSBA::nodes

Set of nodes (camera frames) for SBA system, indexed by node number.

Definition at line 89 of file sba.h.

std::vector<Point, Eigen::aligned_allocator<Point> > sba::SysSBA::oldpoints [protected]

Storage for old points, for checking LM step and reverting.

Definition at line 282 of file sba.h.

Convergence bound (square of minimum acceptable delta change)

Definition at line 162 of file sba.h.

long long sba::SysSBA::t0

Definition at line 82 of file sba.h.

long long sba::SysSBA::t1

Definition at line 82 of file sba.h.

long long sba::SysSBA::t2

Definition at line 82 of file sba.h.

long long sba::SysSBA::t3

Definition at line 82 of file sba.h.

long long sba::SysSBA::t4

Definition at line 82 of file sba.h.

std::vector<Eigen::Vector3d, Eigen::aligned_allocator<Eigen::Vector3d> > sba::SysSBA::tps [protected]

variables for each track

Definition at line 285 of file sba.h.

std::vector<Track, Eigen::aligned_allocator<Track> > sba::SysSBA::tracks

Set of tracks for each point P (projections onto camera frames).

Definition at line 95 of file sba.h.

local or global angle coordinates

Definition at line 144 of file sba.h.

EIGEN_MAKE_ALIGNED_OPERATOR_NEW int sba::SysSBA::verbose

How much information to print to console.

Definition at line 81 of file sba.h.


The documentation for this class was generated from the following files:


sba
Author(s): Kurt Konolige, Helen Oleynikova
autogenerated on Thu Jan 2 2014 12:12:09