This file provides all the ADC firmware functions. More...
Include dependency graph for stm32f10x_adc.c:
Go to the source code of this file.
Macros | |
| #define | CR1_AWDCH_Reset ((uint32_t)0xFFFFFFE0) |
| #define | CR1_AWDMode_Reset ((uint32_t)0xFF3FFDFF) |
| #define | CR1_CLEAR_Mask ((uint32_t)0xFFF0FEFF) |
| #define | CR1_DISCEN_Reset ((uint32_t)0xFFFFF7FF) |
| #define | CR1_DISCEN_Set ((uint32_t)0x00000800) |
| #define | CR1_DISCNUM_Reset ((uint32_t)0xFFFF1FFF) |
| #define | CR1_JAUTO_Reset ((uint32_t)0xFFFFFBFF) |
| #define | CR1_JAUTO_Set ((uint32_t)0x00000400) |
| #define | CR1_JDISCEN_Reset ((uint32_t)0xFFFFEFFF) |
| #define | CR1_JDISCEN_Set ((uint32_t)0x00001000) |
| #define | CR2_ADON_Reset ((uint32_t)0xFFFFFFFE) |
| #define | CR2_ADON_Set ((uint32_t)0x00000001) |
| #define | CR2_CAL_Set ((uint32_t)0x00000004) |
| #define | CR2_CLEAR_Mask ((uint32_t)0xFFF1F7FD) |
| #define | CR2_DMA_Reset ((uint32_t)0xFFFFFEFF) |
| #define | CR2_DMA_Set ((uint32_t)0x00000100) |
| #define | CR2_EXTTRIG_Reset ((uint32_t)0xFFEFFFFF) |
| #define | CR2_EXTTRIG_Set ((uint32_t)0x00100000) |
| #define | CR2_EXTTRIG_SWSTART_Reset ((uint32_t)0xFFAFFFFF) |
| #define | CR2_EXTTRIG_SWSTART_Set ((uint32_t)0x00500000) |
| #define | CR2_JEXTSEL_Reset ((uint32_t)0xFFFF8FFF) |
| #define | CR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF) |
| #define | CR2_JEXTTRIG_JSWSTART_Set ((uint32_t)0x00208000) |
| #define | CR2_JEXTTRIG_Reset ((uint32_t)0xFFFF7FFF) |
| #define | CR2_JEXTTRIG_Set ((uint32_t)0x00008000) |
| #define | CR2_JSWSTART_Set ((uint32_t)0x00200000) |
| #define | CR2_RSTCAL_Set ((uint32_t)0x00000008) |
| #define | CR2_SWSTART_Set ((uint32_t)0x00400000) |
| #define | CR2_TSVREFE_Reset ((uint32_t)0xFF7FFFFF) |
| #define | CR2_TSVREFE_Set ((uint32_t)0x00800000) |
| #define | DR_ADDRESS ((uint32_t)0x4001244C) |
| #define | JDR_Offset ((uint8_t)0x28) |
| #define | JSQR_JL_Reset ((uint32_t)0xFFCFFFFF) |
| #define | JSQR_JL_Set ((uint32_t)0x00300000) |
| #define | JSQR_JSQ_Set ((uint32_t)0x0000001F) |
| #define | SMPR1_SMP_Set ((uint32_t)0x00000007) |
| #define | SMPR2_SMP_Set ((uint32_t)0x00000007) |
| #define | SQR1_CLEAR_Mask ((uint32_t)0xFF0FFFFF) |
| #define | SQR1_SQ_Set ((uint32_t)0x0000001F) |
| #define | SQR2_SQ_Set ((uint32_t)0x0000001F) |
| #define | SQR3_SQ_Set ((uint32_t)0x0000001F) |
Functions | |
| void | ADC_AnalogWatchdogCmd (ADC_TypeDef *ADCx, uint32_t ADC_AnalogWatchdog) |
| Enables or disables the analog watchdog on single/all regular or injected channels. More... | |
| void | ADC_AnalogWatchdogSingleChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel) |
| Configures the analog watchdog guarded single channel. More... | |
| void | ADC_AnalogWatchdogThresholdsConfig (ADC_TypeDef *ADCx, uint16_t HighThreshold, uint16_t LowThreshold) |
| Configures the high and low thresholds of the analog watchdog. More... | |
| void | ADC_AutoInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState) |
| Enables or disables the selected ADC automatic injected group conversion after regular one. More... | |
| void | ADC_ClearFlag (ADC_TypeDef *ADCx, uint8_t ADC_FLAG) |
| Clears the ADCx's pending flags. More... | |
| void | ADC_ClearITPendingBit (ADC_TypeDef *ADCx, uint16_t ADC_IT) |
| Clears the ADCx's interrupt pending bits. More... | |
| void | ADC_Cmd (ADC_TypeDef *ADCx, FunctionalState NewState) |
| Enables or disables the specified ADC peripheral. More... | |
| void | ADC_DeInit (ADC_TypeDef *ADCx) |
| Deinitializes the ADCx peripheral registers to their default reset values. More... | |
| void | ADC_DiscModeChannelCountConfig (ADC_TypeDef *ADCx, uint8_t Number) |
| Configures the discontinuous mode for the selected ADC regular group channel. More... | |
| void | ADC_DiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState) |
| Enables or disables the discontinuous mode on regular group channel for the specified ADC. More... | |
| void | ADC_DMACmd (ADC_TypeDef *ADCx, FunctionalState NewState) |
| Enables or disables the specified ADC DMA request. More... | |
| void | ADC_ExternalTrigConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState) |
| Enables or disables the ADCx conversion through external trigger. More... | |
| void | ADC_ExternalTrigInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState) |
| Enables or disables the ADCx injected channels conversion through external trigger. More... | |
| void | ADC_ExternalTrigInjectedConvConfig (ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConv) |
| Configures the ADCx external trigger for injected channels conversion. More... | |
| FlagStatus | ADC_GetCalibrationStatus (ADC_TypeDef *ADCx) |
| Gets the selected ADC calibration status. More... | |
| uint16_t | ADC_GetConversionValue (ADC_TypeDef *ADCx) |
| Returns the last ADCx conversion result data for regular channel. More... | |
| uint32_t | ADC_GetDualModeConversionValue (void) |
| Returns the last ADC1 and ADC2 conversion result data in dual mode. More... | |
| FlagStatus | ADC_GetFlagStatus (ADC_TypeDef *ADCx, uint8_t ADC_FLAG) |
| Checks whether the specified ADC flag is set or not. More... | |
| uint16_t | ADC_GetInjectedConversionValue (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel) |
| Returns the ADC injected channel conversion result. More... | |
| ITStatus | ADC_GetITStatus (ADC_TypeDef *ADCx, uint16_t ADC_IT) |
| Checks whether the specified ADC interrupt has occurred or not. More... | |
| FlagStatus | ADC_GetResetCalibrationStatus (ADC_TypeDef *ADCx) |
| Gets the selected ADC reset calibration registers status. More... | |
| FlagStatus | ADC_GetSoftwareStartConvStatus (ADC_TypeDef *ADCx) |
| Gets the selected ADC Software start conversion Status. More... | |
| FlagStatus | ADC_GetSoftwareStartInjectedConvCmdStatus (ADC_TypeDef *ADCx) |
| Gets the selected ADC Software start injected conversion Status. More... | |
| void | ADC_Init (ADC_TypeDef *ADCx, ADC_InitTypeDef *ADC_InitStruct) |
| Initializes the ADCx peripheral according to the specified parameters in the ADC_InitStruct. More... | |
| void | ADC_InjectedChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) |
| Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time. More... | |
| void | ADC_InjectedDiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState) |
| Enables or disables the discontinuous mode for injected group channel for the specified ADC. More... | |
| void | ADC_InjectedSequencerLengthConfig (ADC_TypeDef *ADCx, uint8_t Length) |
| Configures the sequencer length for injected channels. More... | |
| void | ADC_ITConfig (ADC_TypeDef *ADCx, uint16_t ADC_IT, FunctionalState NewState) |
| Enables or disables the specified ADC interrupts. More... | |
| void | ADC_RegularChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) |
| Configures for the selected ADC regular channel its corresponding rank in the sequencer and its sample time. More... | |
| void | ADC_ResetCalibration (ADC_TypeDef *ADCx) |
| Resets the selected ADC calibration registers. More... | |
| void | ADC_SetInjectedOffset (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset) |
| Set the injected channels conversion value offset. More... | |
| void | ADC_SoftwareStartConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState) |
| Enables or disables the selected ADC software start conversion . More... | |
| void | ADC_SoftwareStartInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState) |
| Enables or disables the selected ADC start of the injected channels conversion. More... | |
| void | ADC_StartCalibration (ADC_TypeDef *ADCx) |
| Starts the selected ADC calibration process. More... | |
| void | ADC_StructInit (ADC_InitTypeDef *ADC_InitStruct) |
| Fills each ADC_InitStruct member with its default value. More... | |
| void | ADC_TempSensorVrefintCmd (FunctionalState NewState) |
| Enables or disables the temperature sensor and Vrefint channel. More... | |
Detailed Description
This file provides all the ADC firmware functions.
- Version
- V3.5.0
- Date
- 11-March-2011
- Attention
THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
© COPYRIGHT 2011 STMicroelectronics
Definition in file stm32f10x_adc.c.