Initialization and Configuration functions. More...

Collaboration diagram for Initialization and Configuration functions:

Functions
void	CRYP_Cmd (FunctionalState NewState)
	Enables or disables the CRYP peripheral. More...

void	CRYP_DeInit (void)
	Deinitializes the CRYP peripheral registers to their default reset values. More...

void	CRYP_FIFOFlush (void)
	Flushes the IN and OUT FIFOs (that is read and write pointers of the FIFOs are reset) More...

void	CRYP_Init (CRYP_InitTypeDef *CRYP_InitStruct)
	Initializes the CRYP peripheral according to the specified parameters in the CRYP_InitStruct. More...

void	CRYP_IVInit (CRYP_IVInitTypeDef *CRYP_IVInitStruct)
	Initializes the CRYP Initialization Vectors(IV) according to the specified parameters in the CRYP_IVInitStruct. More...

void	CRYP_IVStructInit (CRYP_IVInitTypeDef *CRYP_IVInitStruct)
	Fills each CRYP_IVInitStruct member with its default value. More...

void	CRYP_KeyInit (CRYP_KeyInitTypeDef *CRYP_KeyInitStruct)
	Initializes the CRYP Keys according to the specified parameters in the CRYP_KeyInitStruct. More...

void	CRYP_KeyStructInit (CRYP_KeyInitTypeDef *CRYP_KeyInitStruct)
	Fills each CRYP_KeyInitStruct member with its default value. More...

void	CRYP_PhaseConfig (uint32_t CRYP_Phase)
	Configures the AES-CCM and AES-GCM phases. More...

void	CRYP_StructInit (CRYP_InitTypeDef *CRYP_InitStruct)
	Fills each CRYP_InitStruct member with its default value. More...

Detailed Description

Initialization and Configuration functions.

 ===============================================================================
             ##### Initialization and Configuration functions #####
 ===============================================================================  
 [..] This section provides functions allowing to 
   (+) Initialize the cryptographic Processor using CRYP_Init() function 
       (++)  Encrypt or Decrypt 
       (++)  mode : TDES-ECB, TDES-CBC, 
                    DES-ECB, DES-CBC, 
                    AES-ECB, AES-CBC, AES-CTR, AES-Key, AES-GCM, AES-CCM 
       (++) DataType :  32-bit data, 16-bit data, bit data or bit-string
       (++) Key Size (only in AES modes)
   (+) Configure the Encrypt or Decrypt Key using CRYP_KeyInit() function 
   (+) Configure the Initialization Vectors(IV) for CBC and CTR modes using 
       CRYP_IVInit() function.  
   (+) Flushes the IN and OUT FIFOs : using CRYP_FIFOFlush() function.                         
   (+) Enable or disable the CRYP Processor using CRYP_Cmd() function

Function Documentation

void CRYP_Cmd ( FunctionalState NewState )

Enables or disables the CRYP peripheral.

Parameters

NewState new state of the CRYP peripheral. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 403 of file stm32f4xx_cryp.c.

void CRYP_DeInit ( void )

Deinitializes the CRYP peripheral registers to their default reset values.

Parameters

None

Return values

None

Definition at line 219 of file stm32f4xx_cryp.c.

void CRYP_FIFOFlush ( void )

Flushes the IN and OUT FIFOs (that is read and write pointers of the FIFOs are reset)

Note: The FIFOs must be flushed only when BUSY flag is reset.

Parameters

None

Return values

None

Definition at line 391 of file stm32f4xx_cryp.c.

void CRYP_Init ( CRYP_InitTypeDef * CRYP_InitStruct )

Initializes the CRYP peripheral according to the specified parameters in the CRYP_InitStruct.

Parameters

CRYP_InitStruct pointer to a CRYP_InitTypeDef structure that contains the configuration information for the CRYP peripheral.

Return values

None

Definition at line 235 of file stm32f4xx_cryp.c.

void CRYP_IVInit ( CRYP_IVInitTypeDef * CRYP_IVInitStruct )

Initializes the CRYP Initialization Vectors(IV) according to the specified parameters in the CRYP_IVInitStruct.

Parameters

CRYP_IVInitStruct pointer to a CRYP_IVInitTypeDef structure that contains the configuration information for the CRYP Initialization Vectors(IV).

Return values

None

Definition at line 333 of file stm32f4xx_cryp.c.

void CRYP_IVStructInit ( CRYP_IVInitTypeDef * CRYP_IVInitStruct )

Fills each CRYP_IVInitStruct member with its default value.

Parameters

CRYP_IVInitStruct pointer to a CRYP_IVInitTypeDef Initialization Vectors(IV) structure which will be initialized.

Return values

None

Definition at line 347 of file stm32f4xx_cryp.c.

void CRYP_KeyInit ( CRYP_KeyInitTypeDef * CRYP_KeyInitStruct )

Initializes the CRYP Keys according to the specified parameters in the CRYP_KeyInitStruct.

Parameters

CRYP_KeyInitStruct pointer to a CRYP_KeyInitTypeDef structure that contains the configuration information for the CRYP Keys.

Return values

None

Definition at line 296 of file stm32f4xx_cryp.c.

void CRYP_KeyStructInit ( CRYP_KeyInitTypeDef * CRYP_KeyInitStruct )

Fills each CRYP_KeyInitStruct member with its default value.

Parameters

CRYP_KeyInitStruct pointer to a CRYP_KeyInitTypeDef structure which will be initialized.

Return values

None

Definition at line 315 of file stm32f4xx_cryp.c.

void CRYP_PhaseConfig ( uint32_t CRYP_Phase )

Configures the AES-CCM and AES-GCM phases.

Note: This function is used only with AES-CCM or AES-GCM Algorithms

Parameters

CRYP_Phase

specifies the CRYP AES-CCM and AES-GCM phase to be configured. This parameter can be one of the following values:

CRYP_Phase_Init: Initialization phase
CRYP_Phase_Header: Header phase
CRYP_Phase_Payload: Payload phase
CRYP_Phase_Final: Final phase

Return values

None

Definition at line 366 of file stm32f4xx_cryp.c.

void CRYP_StructInit ( CRYP_InitTypeDef * CRYP_InitStruct )

Fills each CRYP_InitStruct member with its default value.

Parameters

CRYP_InitStruct pointer to a CRYP_InitTypeDef structure which will be initialized.

Return values

None

Definition at line 274 of file stm32f4xx_cryp.c.

Functions

Detailed Description

Function Documentation