Configuration of the CRC computation unit functions. More...
|
Functions | |
| void | CRC_DeInit (void) |
| Deinitializes CRC peripheral registers to their default reset values. More... | |
| void | CRC_PolynomialSizeSelect (uint32_t CRC_PolSize) |
| Selects the polynomial size. More... | |
| void | CRC_ResetDR (void) |
| Resets the CRC calculation unit and sets INIT register content in DR register. More... | |
| void | CRC_ReverseInputDataSelect (uint32_t CRC_ReverseInputData) |
| Selects the reverse operation to be performed on input data. More... | |
| void | CRC_ReverseOutputDataCmd (FunctionalState NewState) |
| Enables or disable the reverse operation on output data. The reverse operation on output data is performed on 32-bit. More... | |
| void | CRC_SetInitRegister (uint32_t CRC_InitValue) |
| Initializes the INIT register. More... | |
| void | CRC_SetPolynomial (uint32_t CRC_Pol) |
| Initializes the polynomail coefficients. More... | |
Detailed Description
Configuration of the CRC computation unit functions.
===============================================================================
##### CRC configuration functions #####
=============================================================================== Function Documentation
| void CRC_DeInit | ( | void | ) |
Deinitializes CRC peripheral registers to their default reset values.
- Parameters
-
None
- Return values
-
None
Definition at line 95 of file stm32f30x_crc.c.
| void CRC_PolynomialSizeSelect | ( | uint32_t | CRC_PolSize | ) |
Selects the polynomial size.
- Parameters
-
CRC_PolSize Specifies the polynomial size. This parameter can be: - CRC_PolSize_7: 7-bit polynomial for CRC calculation
- CRC_PolSize_8: 8-bit polynomial for CRC calculation
- CRC_PolSize_16: 16-bit polynomial for CRC calculation
- CRC_PolSize_32: 32-bit polynomial for CRC calculation
- Return values
-
None
Definition at line 130 of file stm32f30x_crc.c.
| void CRC_ResetDR | ( | void | ) |
Resets the CRC calculation unit and sets INIT register content in DR register.
Resets the CRC Data register (DR).
- Parameters
-
None
- Return values
-
None
Definition at line 114 of file stm32f30x_crc.c.
| void CRC_ReverseInputDataSelect | ( | uint32_t | CRC_ReverseInputData | ) |
Selects the reverse operation to be performed on input data.
- Parameters
-
CRC_ReverseInputData Specifies the reverse operation on input data. This parameter can be: - CRC_ReverseInputData_No: No reverse operation is performed
- CRC_ReverseInputData_8bits: reverse operation performed on 8 bits
- CRC_ReverseInputData_16bits: reverse operation performed on 16 bits
- CRC_ReverseInputData_32bits: reverse operation performed on 32 bits
- Return values
-
None
Definition at line 159 of file stm32f30x_crc.c.
| void CRC_ReverseOutputDataCmd | ( | FunctionalState | NewState | ) |
Enables or disable the reverse operation on output data. The reverse operation on output data is performed on 32-bit.
- Parameters
-
NewState new state of the reverse operation on output data. This parameter can be: ENABLE or DISABLE.
- Return values
-
None
Definition at line 185 of file stm32f30x_crc.c.
| void CRC_SetInitRegister | ( | uint32_t | CRC_InitValue | ) |
Initializes the INIT register.
- Note
- After resetting CRC calculation unit, CRC_InitValue is stored in DR register
- Parameters
-
CRC_InitValue Programmable initial CRC value
- Return values
-
None
Definition at line 208 of file stm32f30x_crc.c.
| void CRC_SetPolynomial | ( | uint32_t | CRC_Pol | ) |
Initializes the polynomail coefficients.
- Parameters
-
CRC_Pol Polynomial to be used for CRC calculation.
- Return values
-
None
Definition at line 218 of file stm32f30x_crc.c.