#include <stm32f4xx_hal_i2c.h>

Public Attributes
uint32_t	AddressingMode

uint32_t	ClockSpeed

uint32_t	DualAddressMode

uint32_t	DutyCycle

uint32_t	GeneralCallMode

uint32_t	NoStretchMode

uint32_t	OwnAddress1

uint32_t	OwnAddress2

uint32_t	OwnAddress2Masks

uint32_t	Timing

Detailed Description

Definition at line 48 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h.

Member Data Documentation

◆ AddressingMode

uint32_t I2C_InitTypeDef::AddressingMode

Specifies if 7-bit or 10-bit addressing mode is selected. This parameter can be a value of I2C addressing mode

Specifies if 7-bit or 10-bit addressing mode is selected. This parameter can be a value of I2C Addressing Mode

Definition at line 59 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h.

◆ ClockSpeed

uint32_t I2C_InitTypeDef::ClockSpeed

Specifies the clock frequency. This parameter must be set to a value lower than 400kHz

Definition at line 50 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h.

◆ DualAddressMode

uint32_t I2C_InitTypeDef::DualAddressMode

Specifies if dual addressing mode is selected. This parameter can be a value of I2C dual addressing mode

Specifies if dual addressing mode is selected. This parameter can be a value of I2C Dual Addressing Mode

Definition at line 62 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h.

◆ DutyCycle

uint32_t I2C_InitTypeDef::DutyCycle

Specifies the I2C fast mode duty cycle. This parameter can be a value of I2C duty cycle in fast mode

Definition at line 53 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h.

◆ GeneralCallMode

uint32_t I2C_InitTypeDef::GeneralCallMode

Specifies if general call mode is selected. This parameter can be a value of I2C general call addressing mode

Specifies if general call mode is selected. This parameter can be a value of I2C General Call Addressing Mode

Definition at line 68 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h.

◆ NoStretchMode

uint32_t I2C_InitTypeDef::NoStretchMode

Specifies if nostretch mode is selected. This parameter can be a value of I2C nostretch mode

Specifies if nostretch mode is selected. This parameter can be a value of I2C No-Stretch Mode

Definition at line 71 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h.

◆ OwnAddress1

uint32_t I2C_InitTypeDef::OwnAddress1

Specifies the first device own address. This parameter can be a 7-bit or 10-bit address.

Definition at line 56 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h.

◆ OwnAddress2

uint32_t I2C_InitTypeDef::OwnAddress2

Specifies the second device own address if dual addressing mode is selected This parameter can be a 7-bit address.

Definition at line 65 of file stm32f407/stm32f407g-disc1/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h.

◆ OwnAddress2Masks

uint32_t I2C_InitTypeDef::OwnAddress2Masks

Specifies the acknowledge mask address second device own address if dual addressing mode is selected This parameter can be a value of I2C Own Address2 Masks

Definition at line 66 of file stm32f7xx_hal_i2c.h.

◆ Timing

uint32_t I2C_InitTypeDef::Timing

Specifies the I2C_TIMINGR_register value. This parameter calculated by referring to I2C initialization section in Reference manual

Definition at line 50 of file stm32f7xx_hal_i2c.h.

The documentation for this struct was generated from the following files:

Public Attributes