libsub.h File Reference

Go to the source code of this file.

Classes

struct  sub_cfg_vpd
union  sub_mdio_frame
struct  sub_version

Defines

#define __SUB_DECL__   extern
#define ADC_ENABLE   0x8000
#define ADC_REF_2_56   0x00C0
#define ADC_REF_VCC   0x0040
#define BB_I2C_FAST   0x01
#define BB_I2C_FAST_P   0x00
#define BB_I2C_STD   0x03
#define DEF_SUB_ERROR(NAME, VAL, DESCR)   NAME=VAL,
#define ETIMEDOUT   116
#define FIFO_CLEAR   0x100
#define FIFO_READ_FULL   0x200
#define FIFO_SELECT_I2C   0x10
#define FIFO_SELECT_SPI   0x01
#define FIFO_SELECT_UART   0x02
#define FPWM_EN0   0x8000
#define FPWM_EN1   0x2000
#define FPWM_EN2   0x0800
#define FPWM_ENABLE   0x0001
#define I2C_GCE   0x01
#define IR_ROW_MODE   0x01
#define IR_UART_MODE   0x00
#define RS_CHAR_5   0x00
#define RS_CHAR_6   0x02
#define RS_CHAR_7   0x04
#define RS_CHAR_8   0x06
#define RS_CHAR_9   0x07
#define RS_PARITY_EVEN   0x20
#define RS_PARITY_NONE   0x00
#define RS_PARITY_ODD   0x30
#define RS_RX_AFTER_TX   0x02
#define RS_RX_BEFORE_TX   0x01
#define RS_RX_ENABLE   0x80
#define RS_STOP_1   0x00
#define RS_STOP_2   0x08
#define RS_TX_ENABLE   0x40
#define SPI_CLK_125KHZ   0x03
#define SPI_CLK_1MHZ   0x01
#define SPI_CLK_250KHZ   0x02
#define SPI_CLK_2MHZ   0x81
#define SPI_CLK_4MHZ   0x00
#define SPI_CLK_500KHZ   0x82
#define SPI_CLK_8MHZ   0x80
#define SPI_CPOL_FALL   0x08
#define SPI_CPOL_RISE   0x00
#define SPI_ENABLE   0x40
#define SPI_LSB_FIRST   0x20
#define SPI_MSB_FIRST   0x00
#define SPI_SETUP_SMPL   0x04
#define SPI_SLAVE   0x10
#define SPI_SMPL_SETUP   0x00
#define SS_CONF(SS_N, SS_MODE)   ((SS_N)<<4)|((SS_MODE)&0x0F)
#define SS_H   0x0F
#define SS_HHHHL   0x0C
#define SS_HHHL   0x0B
#define SS_HHL   0x0A
#define SS_HI   0x0D
#define SS_HiZ   0x08
#define SS_HL   0x09
#define SS_L   0x07
#define SS_LH   0x01
#define SS_LLH   0x02
#define SS_LLLH   0x03
#define SS_LLLLH   0x04
#define SS_LO   0x05
#define SUB_BOOT_MODE   0
#define SUB_ERRORS
#define SUB_MDIO22   0x80
#define SUB_MDIO22_READ   (0x02|SUB_MDIO22)
#define SUB_MDIO22_WRITE   (0x01|SUB_MDIO22)
#define SUB_MDIO45_ADDR   0x00
#define SUB_MDIO45_PRIA   0x02
#define SUB_MDIO45_READ   0x03
#define SUB_MDIO45_WRITE   0x01

Typedefs

typedef void * sub_device
typedef void * sub_handle
typedef int sub_int32_t

Enumerations

enum  { SUB_LASTERROR }
enum  {
  ADC_S0, ADC_S1, ADC_S2, ADC_S3,
  ADC_S4, ADC_S5, ADC_S6, ADC_S7,
  ADC_D10_10X = 9, ADC_D10_200X = 11, ADC_D32_10X = 13, ADC_D32_200X = 15,
  ADC_D01 = 16, ADC_D21 = 18, ADC_D31 = 19, ADC_D41 = 20,
  ADC_D51 = 21, ADC_D61 = 22, ADC_D71 = 23, ADC_D02 = 24,
  ADC_D12 = 25, ADC_D32 = 27, ADC_D42 = 28, ADC_D52 = 29,
  ADC_1_1V = 30, ADC_GND = 31
}

Functions

int sub_adc_config (sub_handle hndl, int flags)
int sub_adc_read (sub_handle hndl, int *data, int *mux, int reads)
int sub_adc_single (sub_handle hndl, int *data, int mux)
int sub_bb_i2c_config (sub_handle hndl, int mode, int stretch_ms)
int sub_bb_i2c_read (sub_handle hndl, int channel, int sa, sub_int32_t ma, int ma_sz, char *buf, int sz)
int sub_bb_i2c_scan (sub_handle hndl, int channel, int *slave_cnt, char *slave_buf)
int sub_bb_i2c_write (sub_handle hndl, int channel, int sa, sub_int32_t ma, int ma_sz, char *buf, int sz)
int sub_close (sub_handle hndl)
int sub_control_request (sub_handle hndl, int type, int request, int value, int index, char *buf, int sz, int timeout)
int sub_fifo_config (sub_handle hndl, int config)
int sub_fifo_read (sub_handle hndl, char *buf, int sz, int to_ms)
int sub_fifo_write (sub_handle hndl, char *buf, int sz, int to_ms)
sub_device sub_find_devices (sub_device first)
int sub_fpwm_config (sub_handle hndl, double freq_hz, int flags)
int sub_fpwm_set (sub_handle hndl, int pwm_n, double duty)
struct sub_cfg_vpd * sub_get_cfg_vpd (sub_handle hndl)
int sub_get_errno (void)
int sub_get_i2c_status (void)
int sub_get_mode (sub_handle hndl, int *boot)
int sub_get_product_id (sub_handle hndl, char *buf, int sz)
int sub_get_serial_number (sub_handle hndl, char *buf, int sz)
struct sub_version * sub_get_version (sub_handle hndl)
int sub_gpio_config (sub_handle hndl, sub_int32_t set, sub_int32_t *get, sub_int32_t mask)
int sub_gpio_read (sub_handle hndl, sub_int32_t *get)
int sub_gpio_write (sub_handle hndl, sub_int32_t set, sub_int32_t *get, sub_int32_t mask)
int sub_gpiob_config (sub_handle hndl, sub_int32_t set, sub_int32_t *get, sub_int32_t mask)
int sub_gpiob_read (sub_handle hndl, sub_int32_t *get)
int sub_gpiob_write (sub_handle hndl, sub_int32_t set, sub_int32_t *get, sub_int32_t mask)
int sub_i2c_config (sub_handle hndl, int sa, int flags)
int sub_i2c_freq (sub_handle hndl, sub_int32_t *freq)
int sub_i2c_read (sub_handle hndl, int sa, sub_int32_t ma, int ma_sz, char *buf, int sz)
int sub_i2c_scan (sub_handle hndl, int *slave_cnt, char *slave_buf)
int sub_i2c_start (sub_handle hndl)
int sub_i2c_stop (sub_handle hndl)
int sub_i2c_write (sub_handle hndl, int sa, sub_int32_t ma, int ma_sz, char *buf, int sz)
int sub_ir_config (sub_handle hndl, int carrier, int duty, int mode,...)
int sub_ir_tx (sub_handle hndl, int sz, char *buf)
int sub_lcd_write (sub_handle hndl, char *str)
int sub_mdio22 (sub_handle hndl, int op, int phyad, int regad, int data, int *content)
int sub_mdio45 (sub_handle hndl, int op, int prtad, int devad, int data, int *content)
int sub_mdio_xfer (sub_handle hndl, int count, union sub_mdio_frame *mdios)
int sub_mdio_xfer_ex (sub_handle hndl, int channel, int count, union sub_mdio_frame *mdios)
sub_handle sub_open (sub_device dev)
int sub_pwm_config (sub_handle hndl, int res_us, int limit)
int sub_pwm_set (sub_handle hndl, int pwm_n, int duty)
int sub_rs_get_config (sub_handle hndl, int *config, sub_int32_t *baud)
int sub_rs_set_config (sub_handle hndl, int config, sub_int32_t baud)
int sub_rs_timing (sub_handle hndl, int flags, int tx_space_us, int rx_msg_us, int rx_byte_us)
int sub_rs_xfer (sub_handle hndl, char *tx_buf, int tx_sz, char *rx_buf, int rx_sz)
int sub_sdio_transfer (sub_handle hndl, char *out_buf, char *in_buf, int out_sz, int in_sz, int ss_config)
int sub_set_debug_level (int level)
int sub_spi_config (sub_handle hndl, int cfg_set, int *cfg_get)
int sub_spi_transfer (sub_handle hndl, char *out_buf, char *in_buf, int sz, int ss_config)
char * sub_strerror (int errnum)
int usb_transaction (sub_handle hndl, char *out_buf, int out_sz, char *in_buf, int in_sz, int timeout)

Variables

__SUB_DECL__ int sub_errno
__SUB_DECL__ int sub_i2c_status

Define Documentation

#define __SUB_DECL__   extern

Definition at line 160 of file libsub.h.

#define ADC_ENABLE   0x8000

Definition at line 249 of file libsub.h.

#define ADC_REF_2_56   0x00C0

Definition at line 251 of file libsub.h.

#define ADC_REF_VCC   0x0040

Definition at line 250 of file libsub.h.

#define BB_I2C_FAST   0x01

Definition at line 179 of file libsub.h.

#define BB_I2C_FAST_P   0x00

Definition at line 178 of file libsub.h.

#define BB_I2C_STD   0x03

Definition at line 180 of file libsub.h.

#define DEF_SUB_ERROR ( NAME,
VAL,
DESCR   )     NAME=VAL,

Definition at line 133 of file libsub.h.

#define ETIMEDOUT   116

Definition at line 137 of file libsub.h.

#define FIFO_CLEAR   0x100

Definition at line 316 of file libsub.h.

#define FIFO_READ_FULL   0x200

Definition at line 317 of file libsub.h.

#define FIFO_SELECT_I2C   0x10

Definition at line 315 of file libsub.h.

#define FIFO_SELECT_SPI   0x01

Definition at line 313 of file libsub.h.

#define FIFO_SELECT_UART   0x02

Definition at line 314 of file libsub.h.

#define FPWM_EN0   0x8000

Definition at line 242 of file libsub.h.

#define FPWM_EN1   0x2000

Definition at line 243 of file libsub.h.

#define FPWM_EN2   0x0800

Definition at line 244 of file libsub.h.

#define FPWM_ENABLE   0x0001

Definition at line 241 of file libsub.h.

#define I2C_GCE   0x01

Definition at line 175 of file libsub.h.

#define IR_ROW_MODE   0x01

Definition at line 308 of file libsub.h.

#define IR_UART_MODE   0x00

Definition at line 307 of file libsub.h.

#define RS_CHAR_5   0x00

Definition at line 287 of file libsub.h.

#define RS_CHAR_6   0x02

Definition at line 288 of file libsub.h.

#define RS_CHAR_7   0x04

Definition at line 289 of file libsub.h.

#define RS_CHAR_8   0x06

Definition at line 290 of file libsub.h.

#define RS_CHAR_9   0x07

Definition at line 291 of file libsub.h.

#define RS_PARITY_EVEN   0x20

Definition at line 295 of file libsub.h.

#define RS_PARITY_NONE   0x00

Definition at line 294 of file libsub.h.

#define RS_PARITY_ODD   0x30

Definition at line 296 of file libsub.h.

#define RS_RX_AFTER_TX   0x02

Definition at line 304 of file libsub.h.

#define RS_RX_BEFORE_TX   0x01

Definition at line 303 of file libsub.h.

#define RS_RX_ENABLE   0x80

Definition at line 283 of file libsub.h.

#define RS_STOP_1   0x00

Definition at line 299 of file libsub.h.

#define RS_STOP_2   0x08

Definition at line 300 of file libsub.h.

#define RS_TX_ENABLE   0x40

Definition at line 284 of file libsub.h.

#define SPI_CLK_125KHZ   0x03

Definition at line 209 of file libsub.h.

#define SPI_CLK_1MHZ   0x01

Definition at line 206 of file libsub.h.

#define SPI_CLK_250KHZ   0x02

Definition at line 208 of file libsub.h.

#define SPI_CLK_2MHZ   0x81

Definition at line 205 of file libsub.h.

#define SPI_CLK_4MHZ   0x00

Definition at line 204 of file libsub.h.

#define SPI_CLK_500KHZ   0x82

Definition at line 207 of file libsub.h.

#define SPI_CLK_8MHZ   0x80

Definition at line 203 of file libsub.h.

#define SPI_CPOL_FALL   0x08

Definition at line 189 of file libsub.h.

#define SPI_CPOL_RISE   0x00

Definition at line 188 of file libsub.h.

#define SPI_ENABLE   0x40

Definition at line 185 of file libsub.h.

#define SPI_LSB_FIRST   0x20

Definition at line 199 of file libsub.h.

#define SPI_MSB_FIRST   0x00

Definition at line 200 of file libsub.h.

#define SPI_SETUP_SMPL   0x04

Definition at line 193 of file libsub.h.

#define SPI_SLAVE   0x10

Definition at line 196 of file libsub.h.

#define SPI_SMPL_SETUP   0x00

Definition at line 192 of file libsub.h.

#define SS_CONF ( SS_N,
SS_MODE   )     ((SS_N)<<4)|((SS_MODE)&0x0F)

Definition at line 212 of file libsub.h.

#define SS_H   0x0F

Definition at line 213 of file libsub.h.

#define SS_HHHHL   0x0C

Definition at line 217 of file libsub.h.

#define SS_HHHL   0x0B

Definition at line 216 of file libsub.h.

#define SS_HHL   0x0A

Definition at line 215 of file libsub.h.

#define SS_HI   0x0D

Definition at line 218 of file libsub.h.

#define SS_HiZ   0x08

Definition at line 225 of file libsub.h.

#define SS_HL   0x09

Definition at line 214 of file libsub.h.

#define SS_L   0x07

Definition at line 219 of file libsub.h.

#define SS_LH   0x01

Definition at line 220 of file libsub.h.

#define SS_LLH   0x02

Definition at line 221 of file libsub.h.

#define SS_LLLH   0x03

Definition at line 222 of file libsub.h.

#define SS_LLLLH   0x04

Definition at line 223 of file libsub.h.

#define SS_LO   0x05

Definition at line 224 of file libsub.h.

#define SUB_BOOT_MODE   0

Definition at line 325 of file libsub.h.

#define SUB_ERRORS
Value:
DEF_SUB_ERROR( SE_OK,                   0,      "OK"                                                                    )\
DEF_SUB_ERROR( SE_NODEV,                1,      "SUB Device not found"                                  )\
DEF_SUB_ERROR( SE_OPEN,                 2,      "Can't open SUB device"                                 )\
DEF_SUB_ERROR( SE_SETCONF,          3,  "Can't set configuration"                               )\
DEF_SUB_ERROR( SE_CLAIM,            4,  "Can't claim interface"                                 )\
DEF_SUB_ERROR( SE_SETA,             5,  "Failed to setup async transaction"             )\
DEF_SUB_ERROR( SE_SUBMIT,           6,  "Failed to submit async transaction"    )\
DEF_SUB_ERROR( SE_BULKOUT,          7,  "Bulk write failed"                                             )\
DEF_SUB_ERROR( SE_BULKIN_RC,    8,      "Bulk read failed"                                              )\
DEF_SUB_ERROR( SE_BULKIN_SZ,    9,      "Bulk read incomplete"                                  )\
DEF_SUB_ERROR( SE_OUT_OVF,      10,     "Out buffer overflow"                                   )\
DEF_SUB_ERROR( SE_I2C,                  11,     "I2C error"                                                             )\
DEF_SUB_ERROR( SE_TAG_CODE,     12,     "Wrong tag code in response"                    )\
DEF_SUB_ERROR( SE_TAG_SIZE,     13,     "Wrong tag size in response"                    )\
DEF_SUB_ERROR( SE_PARAM,        14,     "Wrong parameters"                                              )\
DEF_SUB_ERROR( SE_SPI_DIS,      15,     "SPI Disabled"                                                  )\
DEF_SUB_ERROR( SE_NSUPPORTED,   16,     "Feature not supported"                                 )\
DEF_SUB_ERROR( SE_TIMEOUT,      17,     "Timeout"                                                               )\
DEF_SUB_ERROR( SE_INIT,                 18,     "Init Failed"                                                   )\
DEF_SUB_ERROR( SE_BAD_HNDL,             19,     "Bad Handle"                                                    )\
DEF_SUB_ERROR( SE_IR,                   20,     "InfraRed Failure"                                              )

Definition at line 110 of file libsub.h.

#define SUB_MDIO22   0x80

Definition at line 230 of file libsub.h.

#define SUB_MDIO22_READ   (0x02|SUB_MDIO22)

Definition at line 231 of file libsub.h.

#define SUB_MDIO22_WRITE   (0x01|SUB_MDIO22)

Definition at line 232 of file libsub.h.

#define SUB_MDIO45_ADDR   0x00

Definition at line 233 of file libsub.h.

#define SUB_MDIO45_PRIA   0x02

Definition at line 235 of file libsub.h.

#define SUB_MDIO45_READ   0x03

Definition at line 236 of file libsub.h.

#define SUB_MDIO45_WRITE   0x01

Definition at line 234 of file libsub.h.

Typedef Documentation

typedef void* sub_device

Definition at line 44 of file libsub.h.

typedef void* sub_handle

Definition at line 45 of file libsub.h.

typedef int sub_int32_t

Definition at line 41 of file libsub.h.

Enumeration Type Documentation

anonymous enum
Enumerator:
SUB_LASTERROR 

Definition at line 134 of file libsub.h.

anonymous enum
Enumerator:
ADC_S0 
ADC_S1 
ADC_S2 
ADC_S3 
ADC_S4 
ADC_S5 
ADC_S6 
ADC_S7 
ADC_D10_10X 
ADC_D10_200X 
ADC_D32_10X 
ADC_D32_200X 
ADC_D01 
ADC_D21 
ADC_D31 
ADC_D41 
ADC_D51 
ADC_D61 
ADC_D71 
ADC_D02 
ADC_D12 
ADC_D32 
ADC_D42 
ADC_D52 
ADC_1_1V 
ADC_GND 

Definition at line 253 of file libsub.h.

Function Documentation

int sub_adc_config ( sub_handle  hndl,
int  flags 
)

Definition at line 1442 of file lib/libsub.c.

int sub_adc_read ( sub_handle  hndl,
int *  data,
int *  mux,
int  reads 
)

Definition at line 1461 of file lib/libsub.c.

int sub_adc_single ( sub_handle  hndl,
int *  data,
int  mux 
)

Definition at line 1457 of file lib/libsub.c.

int sub_bb_i2c_config ( sub_handle  hndl,
int  mode,
int  stretch_ms 
)

Definition at line 1624 of file lib/libsub.c.

int sub_bb_i2c_read ( sub_handle  hndl,
int  channel,
int  sa,
sub_int32_t  ma,
int  ma_sz,
char *  buf,
int  sz 
)

Definition at line 1664 of file lib/libsub.c.

int sub_bb_i2c_scan ( sub_handle  hndl,
int  channel,
int *  slave_cnt,
char *  slave_buf 
)

Definition at line 1642 of file lib/libsub.c.

int sub_bb_i2c_write ( sub_handle  hndl,
int  channel,
int  sa,
sub_int32_t  ma,
int  ma_sz,
char *  buf,
int  sz 
)

Definition at line 1710 of file lib/libsub.c.

int sub_close ( sub_handle  hndl  ) 

Definition at line 485 of file lib/libsub.c.

int sub_control_request ( sub_handle  hndl,
int  type,
int  request,
int  value,
int  index,
char *  buf,
int  sz,
int  timeout 
)

Definition at line 2189 of file lib/libsub.c.

int sub_fifo_config ( sub_handle  hndl,
int  config 
)

Definition at line 1936 of file lib/libsub.c.

int sub_fifo_read ( sub_handle  hndl,
char *  buf,
int  sz,
int  to_ms 
)

Definition at line 1869 of file lib/libsub.c.

int sub_fifo_write ( sub_handle  hndl,
char *  buf,
int  sz,
int  to_ms 
)

Definition at line 1836 of file lib/libsub.c.

sub_device sub_find_devices ( sub_device  first  ) 

Definition at line 238 of file lib/libsub.c.

int sub_fpwm_config ( sub_handle  hndl,
double  freq_hz,
int  flags 
)

Definition at line 1259 of file lib/libsub.c.

int sub_fpwm_set ( sub_handle  hndl,
int  pwm_n,
double  duty 
)

Definition at line 1319 of file lib/libsub.c.

struct sub_cfg_vpd* sub_get_cfg_vpd ( sub_handle  hndl  )  [read]

Definition at line 582 of file lib/libsub.c.

int sub_get_errno ( void   ) 

Definition at line 2378 of file lib/libsub.c.

int sub_get_i2c_status ( void   ) 

Definition at line 2383 of file lib/libsub.c.

int sub_get_mode ( sub_handle  hndl,
int *  boot 
)

Definition at line 505 of file lib/libsub.c.

int sub_get_product_id ( sub_handle  hndl,
char *  buf,
int  sz 
)

Definition at line 2218 of file lib/libsub.c.

int sub_get_serial_number ( sub_handle  hndl,
char *  buf,
int  sz 
)

Definition at line 2206 of file lib/libsub.c.

struct sub_version* sub_get_version ( sub_handle  hndl  )  [read]

Definition at line 530 of file lib/libsub.c.

int sub_gpio_config ( sub_handle  hndl,
sub_int32_t  set,
sub_int32_t *  get,
sub_int32_t  mask 
)

Definition at line 1151 of file lib/libsub.c.

int sub_gpio_read ( sub_handle  hndl,
sub_int32_t *  get 
)

Definition at line 1168 of file lib/libsub.c.

int sub_gpio_write ( sub_handle  hndl,
sub_int32_t  set,
sub_int32_t *  get,
sub_int32_t  mask 
)

Definition at line 1183 of file lib/libsub.c.

int sub_gpiob_config ( sub_handle  hndl,
sub_int32_t  set,
sub_int32_t *  get,
sub_int32_t  mask 
)

Definition at line 1205 of file lib/libsub.c.

int sub_gpiob_read ( sub_handle  hndl,
sub_int32_t *  get 
)

Definition at line 1222 of file lib/libsub.c.

int sub_gpiob_write ( sub_handle  hndl,
sub_int32_t  set,
sub_int32_t *  get,
sub_int32_t  mask 
)

Definition at line 1237 of file lib/libsub.c.

int sub_i2c_config ( sub_handle  hndl,
int  sa,
int  flags 
)

Definition at line 672 of file lib/libsub.c.

int sub_i2c_freq ( sub_handle  hndl,
sub_int32_t *  freq 
)

Definition at line 617 of file lib/libsub.c.

int sub_i2c_read ( sub_handle  hndl,
int  sa,
sub_int32_t  ma,
int  ma_sz,
char *  buf,
int  sz 
)

Definition at line 759 of file lib/libsub.c.

int sub_i2c_scan ( sub_handle  hndl,
int *  slave_cnt,
char *  slave_buf 
)

Definition at line 727 of file lib/libsub.c.

int sub_i2c_start ( sub_handle  hndl  ) 

Definition at line 687 of file lib/libsub.c.

int sub_i2c_stop ( sub_handle  hndl  ) 

Definition at line 708 of file lib/libsub.c.

int sub_i2c_write ( sub_handle  hndl,
int  sa,
sub_int32_t  ma,
int  ma_sz,
char *  buf,
int  sz 
)

Definition at line 827 of file lib/libsub.c.

int sub_ir_config ( sub_handle  hndl,
int  carrier,
int  duty,
int  mode,
  ... 
)

Definition at line 1751 of file lib/libsub.c.

int sub_ir_tx ( sub_handle  hndl,
int  sz,
char *  buf 
)

Definition at line 1804 of file lib/libsub.c.

int sub_lcd_write ( sub_handle  hndl,
char *  str 
)

Definition at line 1498 of file lib/libsub.c.

int sub_mdio22 ( sub_handle  hndl,
int  op,
int  phyad,
int  regad,
int  data,
int *  content 
)

Definition at line 1041 of file lib/libsub.c.

int sub_mdio45 ( sub_handle  hndl,
int  op,
int  prtad,
int  devad,
int  data,
int *  content 
)

Definition at line 1057 of file lib/libsub.c.

int sub_mdio_xfer ( sub_handle  hndl,
int  count,
union sub_mdio_frame *  mdios 
)

Definition at line 1096 of file lib/libsub.c.

int sub_mdio_xfer_ex ( sub_handle  hndl,
int  channel,
int  count,
union sub_mdio_frame *  mdios 
)

Definition at line 1073 of file lib/libsub.c.

sub_handle sub_open ( sub_device  dev  ) 

Definition at line 363 of file lib/libsub.c.

int sub_pwm_config ( sub_handle  hndl,
int  res_us,
int  limit 
)

Definition at line 1349 of file lib/libsub.c.

int sub_pwm_set ( sub_handle  hndl,
int  pwm_n,
int  duty 
)

Definition at line 1410 of file lib/libsub.c.

int sub_rs_get_config ( sub_handle  hndl,
int *  config,
sub_int32_t *  baud 
)

Definition at line 1550 of file lib/libsub.c.

int sub_rs_set_config ( sub_handle  hndl,
int  config,
sub_int32_t  baud 
)

Definition at line 1524 of file lib/libsub.c.

int sub_rs_timing ( sub_handle  hndl,
int  flags,
int  tx_space_us,
int  rx_msg_us,
int  rx_byte_us 
)

Definition at line 1573 of file lib/libsub.c.

int sub_rs_xfer ( sub_handle  hndl,
char *  tx_buf,
int  tx_sz,
char *  rx_buf,
int  rx_sz 
)

Definition at line 1597 of file lib/libsub.c.

int sub_sdio_transfer ( sub_handle  hndl,
char *  out_buf,
char *  in_buf,
int  out_sz,
int  in_sz,
int  ss_config 
)

Definition at line 1009 of file lib/libsub.c.

int sub_set_debug_level ( int  level  ) 
int sub_spi_config ( sub_handle  hndl,
int  cfg_set,
int *  cfg_get 
)

Definition at line 891 of file lib/libsub.c.

int sub_spi_transfer ( sub_handle  hndl,
char *  out_buf,
char *  in_buf,
int  sz,
int  ss_config 
)

Definition at line 915 of file lib/libsub.c.

char* sub_strerror ( int  errnum  ) 

Definition at line 2173 of file lib/libsub.c.

int usb_transaction ( sub_handle  hndl,
char *  out_buf,
int  out_sz,
char *  in_buf,
int  in_sz,
int  timeout 
)

Definition at line 2022 of file lib/libsub.c.

Variable Documentation

__SUB_DECL__ int sub_errno

Definition at line 164 of file libsub.h.

__SUB_DECL__ int sub_i2c_status

Definition at line 164 of file libsub.h.

 All Classes Files Functions Variables Typedefs Enumerator Defines

sub20
Author(s): Sebastian Haug
autogenerated on Fri Jan 11 09:59:56 2013