geometric_shape_to_BVH_model.h
Go to the documentation of this file.
1 /*
2  * Software License Agreement (BSD License)
3  *
4  * Copyright (c) 2011-2014, Willow Garage, Inc.
5  * Copyright (c) 2014-2016, Open Source Robotics Foundation
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  *
12  * * Redistributions of source code must retain the above copyright
13  * notice, this list of conditions and the following disclaimer.
14  * * Redistributions in binary form must reproduce the above
15  * copyright notice, this list of conditions and the following
16  * disclaimer in the documentation and/or other materials provided
17  * with the distribution.
18  * * Neither the name of Open Source Robotics Foundation nor the names of its
19  * contributors may be used to endorse or promote products derived
20  * from this software without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
23  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
24  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
25  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
26  * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
27  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
28  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
30  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
32  * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
33  * POSSIBILITY OF SUCH DAMAGE.
34  */
35 
38 #ifndef FCL_SHAPE_GEOMETRICSHAPETOBVHMODEL_H
39 #define FCL_SHAPE_GEOMETRICSHAPETOBVHMODEL_H
40 
42 #include "fcl/geometry/shape/box.h"
52 
53 namespace fcl
54 {
59 enum class FinalizeModel{
60  DO,
61  DONT
62 };
63 
64 
84 template<typename BV>
86 int generateBVHModel(BVHModel<BV>& model, const Box<typename BV::S>& shape, const Transform3<typename BV::S>& pose, FinalizeModel finalize_model = FinalizeModel::DO);
87 
93 template<typename BV>
94 int generateBVHModel(BVHModel<BV>& model, const Sphere<typename BV::S>& shape, const Transform3<typename BV::S>& pose, unsigned int seg, unsigned int ring, FinalizeModel finalize_model = FinalizeModel::DO);
95 
102 template<typename BV>
103 int generateBVHModel(BVHModel<BV>& model, const Sphere<typename BV::S>& shape, const Transform3<typename BV::S>& pose, unsigned int n_faces_for_unit_sphere, FinalizeModel finalize_model = FinalizeModel::DO);
104 
110 template<typename BV>
111 int generateBVHModel(BVHModel<BV>& model, const Ellipsoid<typename BV::S>& shape, const Transform3<typename BV::S>& pose, unsigned int seg, unsigned int ring, FinalizeModel finalize_model = FinalizeModel::DO);
112 
120 template<typename BV>
121 int generateBVHModel(BVHModel<BV>& model, const Ellipsoid<typename BV::S>& shape, const Transform3<typename BV::S>& pose, unsigned int n_faces_for_unit_ellipsoid, FinalizeModel finalize_model = FinalizeModel::DO);
122 
128 template<typename BV>
129 int generateBVHModel(BVHModel<BV>& model, const Cylinder<typename BV::S>& shape, const Transform3<typename BV::S>& pose, unsigned int circle_split_tot, unsigned int h_num, FinalizeModel finalize_model = FinalizeModel::DO);
130 
137 template<typename BV>
138 int generateBVHModel(BVHModel<BV>& model, const Cylinder<typename BV::S>& shape, const Transform3<typename BV::S>& pose, unsigned int circle_split_tot_for_unit_cylinder, FinalizeModel finalize_model = FinalizeModel::DO);
139 
140 
146 template<typename BV>
147 int generateBVHModel(BVHModel<BV>& model, const Cone<typename BV::S>& shape, const Transform3<typename BV::S>& pose, unsigned int circle_split_tot, unsigned int h_num, FinalizeModel finalize_model = FinalizeModel::DO);
148 
155 template<typename BV>
156 int generateBVHModel(BVHModel<BV>& model, const Cone<typename BV::S>& shape, const Transform3<typename BV::S>& pose, unsigned int circle_split_tot_for_unit_cone, FinalizeModel finalize_model = FinalizeModel::DO);
157  // end of doxygen group generateBVHModel
159 
160 } // namespace fcl
161 
163 
164 #endif
triangle_p.h
sphere.h
fcl::FinalizeModel::DONT
@ DONT
geometric_shape_to_BVH_model-inl.h
halfspace.h
BVH_model.h
fcl::FinalizeModel
FinalizeModel
enum class used to indicate whether we simply want to add more primitives to the model or finalize it...
Definition: geometric_shape_to_BVH_model.h:59
plane.h
box.h
cone.h
ellipsoid.h
convex.h
capsule.h
fcl::FinalizeModel::DO
@ DO
fcl::generateBVHModel
int generateBVHModel(BVHModel< BV > &model, const Box< typename BV::S > &shape, const Transform3< typename BV::S > &pose, FinalizeModel finalize_model)
Generate BVH model from box.
Definition: geometric_shape_to_BVH_model-inl.h:69
fcl
Main namespace.
Definition: broadphase_bruteforce-inl.h:45
cylinder.h


fcl
Author(s):
autogenerated on Tue Dec 5 2023 03:40:48