ADC driver modules. More...

Collaboration diagram for ADC:

Modules
	ADC_Exported_Constants

	ADC_Private_Functions

	ADC_Exported_Types

	ADC_Exported_Macros

	ADC_Exported_Functions

	ADC_Private_TypesDefinitions

	ADC_Private_Defines

	ADC_Private_Macros

	ADC_Private_Variables

	ADC_Private_FunctionPrototypes

	HRTIM_Exported_Constants

Classes
struct	ADC_CommonInitTypeDef
	ADC Common Init structure definition. More...

struct	ADC_InitTypeDef
	ADC Init structure definition. More...

struct	HRTIM_ADCTriggerCfgTypeDef
	ADC trigger configuration definition. More...

struct	HRTIM_BaseInitTypeDef
	HRTIM Configuration Structure definition - Time base related parameters. More...

struct	HRTIM_BasicCaptureChannelCfgTypeDef
	Basic capture mode configuration definition. More...

struct	HRTIM_BasicOCChannelCfgTypeDef
	Basic output compare mode configuration definition. More...

struct	HRTIM_BasicOnePulseChannelCfgTypeDef
	Basic One Pulse mode configuration definition. More...

struct	HRTIM_BasicPWMChannelCfgTypeDef
	Basic PWM output mode configuration definition. More...

struct	HRTIM_BurstModeCfgTypeDef
	Burst mode configuration definition. More...

struct	HRTIM_CaptureCfgTypeDef
	Capture unit configuration definition. More...

struct	HRTIM_ChopperModeCfgTypeDef
	Chopper mode configuration definition. More...

struct	HRTIM_CompareCfgTypeDef
	Compare unit configuration definition. More...

struct	HRTIM_DeadTimeCfgTypeDef
	Dead time feature configuration definition. More...

struct	HRTIM_EventCfgTypeDef
	External event channel configuration definition. More...

struct	HRTIM_FaultCfgTypeDef
	Fault channel configuration definition. More...

struct	HRTIM_OutputCfgTypeDef
	Output configuration definition. More...

struct	HRTIM_SynchroCfgTypeDef
	Master synchronization configuration definition. More...

struct	HRTIM_TimerCfgTypeDef
	Timer configuration definition. More...

struct	HRTIM_TimerEventFilteringCfgTypeDef
	External event filtering in timing units configuration definition. More...

struct	HRTIM_TimerInitTypeDef
	Waveform mode initialization parameters definition. More...

Macros
#define	__HRTIM_DISABLE(__HANDLE__, __TIMERS__)

#define	__HRTIM_ENABLE(__HANDLE__, __TIMERS__) ((__HANDLE__)->HRTIM_MASTER.MCR \|= (__TIMERS__))
	Enables or disables the timer counter(s) More...

#define	CCR_CLEAR_MASK ((uint32_t)0xFFFC10E0)

#define	CDR_ADDRESS ((uint32_t)0x40012308)

#define	CFGR_CLEAR_Mask ((uint32_t)0xFDFFC007)

#define	CR1_AWDCH_RESET ((uint32_t)0xFFFFFFE0)

#define	CR1_AWDMode_RESET ((uint32_t)0xFF3FFDFF)

#define	CR1_CLEAR_MASK ((uint32_t)0xFCFFFEFF)

#define	CR1_DISCNUM_RESET ((uint32_t)0xFFFF1FFF)

#define	CR2_CLEAR_MASK ((uint32_t)0xC0FFF7FD)

#define	CR2_EXTEN_RESET ((uint32_t)0xCFFFFFFF)

#define	CR2_JEXTEN_RESET ((uint32_t)0xFFCFFFFF)

#define	CR2_JEXTSEL_RESET ((uint32_t)0xFFF0FFFF)

#define	CR_CLEAR_MASK ((uint32_t)0xFFFC30E0)

#define	HRTIM_TAOEN_MASK (HRTIM_OENR_TA2OEN \| HRTIM_OENR_TA1OEN)

#define	HRTIM_TBOEN_MASK (HRTIM_OENR_TB2OEN \| HRTIM_OENR_TB1OEN)

#define	HRTIM_TCOEN_MASK (HRTIM_OENR_TC2OEN \| HRTIM_OENR_TC1OEN)

#define	HRTIM_TDOEN_MASK (HRTIM_OENR_TD2OEN \| HRTIM_OENR_TD1OEN)

#define	HRTIM_TEOEN_MASK (HRTIM_OENR_TE2OEN \| HRTIM_OENR_TE1OEN)

#define	JDR_Offset ((uint8_t)0x80)

#define	JDR_OFFSET ((uint8_t)0x28)

#define	JSQR_CLEAR_Mask ((uint32_t)0x00000000)

#define	JSQR_JL_RESET ((uint32_t)0xFFCFFFFF)

#define	JSQR_JL_SET ((uint32_t)0x00300000)

#define	JSQR_JSQ_SET ((uint32_t)0x0000001F)

#define	SMPR1_SMP_SET ((uint32_t)0x00000007)

#define	SMPR2_SMP_SET ((uint32_t)0x00000007)

#define	SQR1_L_RESET ((uint32_t)0xFF0FFFFF)

#define	SQR1_SQ_SET ((uint32_t)0x0000001F)

#define	SQR2_SQ_SET ((uint32_t)0x0000001F)

#define	SQR3_SQ_SET ((uint32_t)0x0000001F)

Functions
void	ADC_AnalogWatchdogSingleChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel)
	Configures the analog watchdog guarded single channel. More...

void	ADC_AnalogWatchdogThresholdsConfig (ADC_TypeDef *ADCx, uint16_t HighThreshold, uint16_t LowThreshold)
	Configures the high and low thresholds of the analog watchdog. More...

void	ADC_ClearFlag (ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
	Clears the ADCx's pending flags. More...

void	ADC_ClearITPendingBit (ADC_TypeDef *ADCx, uint16_t ADC_IT)
	Clears the ADCx's interrupt pending bits. More...

void	ADC_CommonInit (ADC_CommonInitTypeDef *ADC_CommonInitStruct)
	Initializes the ADCs peripherals according to the specified parameters in the ADC_CommonInitStruct. More...

void	ADC_ContinuousModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the ADC continuous conversion mode. More...

void	ADC_DeInit (void)
	Deinitializes all ADCs peripherals registers to their default reset values. More...

void	ADC_DMARequestAfterLastTransferCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the ADC DMA request after last transfer (Single-ADC mode) More...

void	ADC_EOCOnEachRegularChannelCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
	Enables or disables the EOC on each regular channel conversion. More...

void	ADC_ExternalTrigInjectedConvConfig (ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConv)
	Configures the ADCx external trigger for injected channels conversion. More...

void	ADC_ExternalTrigInjectedConvEdgeConfig (ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConvEdge)
	Configures the ADCx external trigger edge for injected channels conversion. More...

FlagStatus	ADC_GetFlagStatus (ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
	Checks whether the specified ADC flag is set or not. More...

ITStatus	ADC_GetITStatus (ADC_TypeDef *ADCx, uint16_t ADC_IT)
	Checks whether the specified ADC interrupt has occurred or not. More...

uint32_t	ADC_GetMultiModeConversionValue (void)
	Returns the last ADC1, ADC2 and ADC3 regular conversions results data in the selected multi mode. More...

FlagStatus	ADC_GetSoftwareStartConvStatus (ADC_TypeDef *ADCx)
	Gets the selected ADC Software start regular conversion Status. More...

FlagStatus	ADC_GetSoftwareStartInjectedConvCmdStatus (ADC_TypeDef *ADCx)
	Gets the selected ADC Software start injected conversion Status. More...

void	ADC_InjectedChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
	Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time. More...

void	ADC_InjectedSequencerLengthConfig (ADC_TypeDef *ADCx, uint8_t Length)
	Configures the sequencer length for injected channels. More...

void	ADC_ITConfig (ADC_TypeDef *ADCx, uint16_t ADC_IT, FunctionalState NewState)
	Enables or disables the specified ADC interrupts. More...

void	ADC_MultiModeDMARequestAfterLastTransferCmd (FunctionalState NewState)
	Enables or disables the ADC DMA request after last transfer in multi ADC mode. More...

void	ADC_SetInjectedOffset (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset)
	Set the injected channels conversion value offset. More...

void	ADC_SoftwareStartConv (ADC_TypeDef *ADCx)
	Enables the selected ADC software start conversion of the regular channels. More...

void	ADC_SoftwareStartInjectedConv (ADC_TypeDef *ADCx)
	Enables the selected ADC software start conversion of the injected channels. More...

void	ADC_TempSensorVrefintCmd (FunctionalState NewState)
	Enables or disables the temperature sensor and Vrefint channels. More...

void	ADC_VBATCmd (FunctionalState NewState)
	Enables or disables the VBAT (Voltage Battery) channel. More...

void	HRTIM_ADCTriggerConfig (HRTIM_TypeDef HRTIMx, uint32_t ADCTrigger, HRTIM_ADCTriggerCfgTypeDef pADCTriggerCfg)
	Configures both the ADC trigger register update source and the ADC trigger source. More...

void	HRTIM_BurstDMAConfig (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t RegistersToUpdate)
	Configures the burst DMA controller for a timer. More...

void	HRTIM_BurstModeConfig (HRTIM_TypeDef HRTIMx, HRTIM_BurstModeCfgTypeDef pBurstModeCfg)
	Configures the burst mode feature of the HRTIMx. More...

void	HRTIM_BurstModeCtl (HRTIM_TypeDef *HRTIMx, uint32_t Enable)
	Enables or disables the HRTIMx burst mode controller. More...

void	HRTIM_ChopperModeConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, HRTIM_ChopperModeCfgTypeDef pChopperModeCfg)
	Configures the chopper mode feature for a timer. More...

void	HRTIM_ClearCommonFlag (HRTIM_TypeDef *HRTIMx, uint32_t HRTIM_CommonFLAG)
	Clears the common interrupt flags. More...

void	HRTIM_ClearCommonITPendingBit (HRTIM_TypeDef *HRTIMx, uint32_t HRTIM_CommonIT)
	Clears the common interrupt pending bits. More...

void	HRTIM_ClearFlag (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t HRTIM_FLAG)
	Clears the Master and slaves interrupt flags. More...

void	HRTIM_ClearITPendingBit (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t HRTIM_IT)
	Clears the Master and slaves interrupt request pending bits. More...

void	HRTIM_DeadTimeConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, HRTIM_DeadTimeCfgTypeDef pDeadTimeCfg)
	Configures the dead time insertion feature for a timer. More...

void	HRTIM_DeInit (HRTIM_TypeDef *HRTIMx)
	De-initializes a timer operating in all mode. More...

void	HRTIM_DLLCalibrationStart (HRTIM_TypeDef *HRTIMx, uint32_t CalibrationRate)
	Starts the DLL calibration. More...

void	HRTIM_DMACmd (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t HRTIM_DMA, FunctionalState NewState)
	Enables or disables the HRTIMx's DMA Requests. More...

void	HRTIM_EventConfig (HRTIM_TypeDef HRTIMx, uint32_t Event, HRTIM_EventCfgTypeDef pEventCfg)
	Configures the conditioning of an external event. More...

void	HRTIM_EventPrescalerConfig (HRTIM_TypeDef *HRTIMx, uint32_t Prescaler)
	Configures the external event conditioning block prescaler. More...

void	HRTIM_FaultConfig (HRTIM_TypeDef hrtim, HRTIM_FaultCfgTypeDef pFaultCfg, uint32_t Fault)
	Configures the conditioning of fault input. More...

void	HRTIM_FaultModeCtl (HRTIM_TypeDef *HRTIMx, uint32_t Fault, uint32_t Enable)
	Enables or disables the HRTIMx Fault mode. More...

void	HRTIM_FaultPrescalerConfig (HRTIM_TypeDef *HRTIMx, uint32_t Prescaler)
	Configures the fault conditioning block prescaler. More...

uint32_t	HRTIM_GetBurstStatus (HRTIM_TypeDef *HRTIMx)
	Returns the actual status (active or inactive) of the burst mode controller. More...

uint32_t	HRTIM_GetCapturedValue (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t CaptureUnit)
	Returns actual value of the capture register of the designated capture unit. More...

FlagStatus	HRTIM_GetCommonFlagStatus (HRTIM_TypeDef *HRTIMx, uint32_t HRTIM_CommonFLAG)
	Checks whether the specified HRTIM common flag is set or not. More...

ITStatus	HRTIM_GetCommonITStatus (HRTIM_TypeDef *HRTIMx, uint32_t HRTIM_CommonIT)
	Checks whether the specified HRTIM common interrupt has occurred or not. More...

uint32_t	HRTIM_GetCurrentPushPullStatus (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx)
	Indicates on which output the signal is currently active (when the push pull mode is enabled) More...

uint32_t	HRTIM_GetDelayedProtectionStatus (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t Output)
	Returns the level (active or inactive) of the designated output when the delayed protection was triggered. More...

FlagStatus	HRTIM_GetFlagStatus (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t HRTIM_FLAG)
	Checks whether the specified HRTIM flag is set or not. More...

uint32_t	HRTIM_GetIdlePushPullStatus (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx)
	Indicates on which output the signal was applied, in push-pull mode balanced fault mode or delayed idle mode, when the protection was triggered. More...

ITStatus	HRTIM_GetITStatus (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t HRTIM_IT)
	Checks whether the specified HRTIM interrupt has occurred or not. More...

void	HRTIM_ITCommonConfig (HRTIM_TypeDef *HRTIMx, uint32_t HRTIM_CommonIT, FunctionalState NewState)
	Enables or disables the common interrupt request. More...

void	HRTIM_ITConfig (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t HRTIM_TIM_IT, FunctionalState NewState)
	Enables or disables the Master and slaves interrupt request. More...

void	HRTIM_MasterSetCompare (HRTIM_TypeDef *HRTIMx, uint32_t CompareUnit, uint32_t Compare)
	Sets the HRTIMx Master Comparex Register value. More...

void	HRTIM_SimpleBase_Init (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, HRTIM_BaseInitTypeDef HRTIM_BaseInitStruct)
	Initializes the HRTIMx timer in basic time base mode. More...

void	HRTIM_SimpleBaseStart (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx)
	Starts the counter of a timer operating in basic time base mode. More...

void	HRTIM_SimpleBaseStop (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx)
	Stops the counter of a timer operating in basic time base mode. More...

void	HRTIM_SimpleCapture_Init (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, HRTIM_BaseInitTypeDef HRTIM_BaseInitStruct)
	Initializes a timer operating in basic capture mode. More...

void	HRTIM_SimpleCaptureChannelConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, uint32_t CaptureChannel, HRTIM_BasicCaptureChannelCfgTypeDef pBasicCaptureChannelCfg)
	Configures a basic capture. More...

void	HRTIM_SimpleCaptureStart (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t CaptureChannel)
	Enables a basic capture on the designed capture unit. More...

void	HRTIM_SimpleCaptureStop (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t CaptureChannel)
	Disables a basic capture on the designed capture unit. More...

void	HRTIM_SimpleOC_Init (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, HRTIM_BaseInitTypeDef HRTIM_BaseInitStruct)
	Initializes the HRTIMx timer in basic output compare mode. More...

void	HRTIM_SimpleOCChannelConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, uint32_t OCChannel, HRTIM_BasicOCChannelCfgTypeDef pBasicOCChannelCfg)
	Configures an output in basic output compare mode. More...

void	HRTIM_SimpleOCStart (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t OCChannel)
	Starts the output compare signal generation on the designed timer output. More...

void	HRTIM_SimpleOCStop (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t OCChannel)
	Stops the output compare signal generation on the designed timer output. More...

void	HRTIM_SimpleOnePulse_Init (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, HRTIM_BaseInitTypeDef HRTIM_BaseInitStruct)
	Initializes the HRTIMx timer in basic one pulse mode. More...

void	HRTIM_SimpleOnePulseChannelConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, uint32_t OnePulseChannel, HRTIM_BasicOnePulseChannelCfgTypeDef pBasicOnePulseChannelCfg)
	Configures an output basic one pulse mode. More...

void	HRTIM_SimpleOnePulseStart (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t OnePulseChannel)
	Enables the basic one pulse signal generation on the designed output. More...

void	HRTIM_SimpleOnePulseStop (HRTIM_TypeDef *HRTIM_, uint32_t TimerIdx, uint32_t OnePulseChannel)
	Disables the basic one pulse signal generation on the designed output. More...

void	HRTIM_SimplePWM_Init (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, HRTIM_BaseInitTypeDef HRTIM_BaseInitStruct)
	Initializes the HRTIMx timer in basic PWM mode. More...

void	HRTIM_SimplePWMChannelConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, uint32_t PWMChannel, HRTIM_BasicPWMChannelCfgTypeDef pBasicPWMChannelCfg)
	Configures an output in basic PWM mode. More...

void	HRTIM_SimplePWMStart (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t PWMChannel)
	Starts the PWM output signal generation on the designed timer output. More...

void	HRTIM_SimplePWMStop (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t PWMChannel)
	Stops the PWM output signal generation on the designed timer output. More...

void	HRTIM_SlaveSetCompare (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t CompareUnit, uint32_t Compare)
	Sets the HRTIMx Slave Comparex Register value. More...

void	HRTIM_SoftwareCapture (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t CaptureUnit)
	Triggers a software capture on the designed capture unit. More...

void	HRTIM_SoftwareReset (HRTIM_TypeDef *HRTIMx, uint32_t TimersToReset)
	Triggers the reset of one or several timers. More...

void	HRTIM_SoftwareUpdate (HRTIM_TypeDef *HRTIMx, uint32_t TimersToUpdate)
	Triggers the update of the registers of one or several timers. More...

void	HRTIM_SynchronizationConfig (HRTIM_TypeDef HRTIMx, HRTIM_SynchroCfgTypeDef pSynchroCfg)
	Configures the external input/output synchronization of the HRTIMx. More...

void	HRTIM_TimerEventFilteringConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, uint32_t Event, HRTIM_TimerEventFilteringCfgTypeDef pTimerEventFilteringCfg)
	Configures the event filtering capabilities of a timer (blanking, windowing) More...

void	HRTIM_Waveform_Init (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, HRTIM_BaseInitTypeDef HRTIM_BaseInitStruct, HRTIM_TimerInitTypeDef *HRTIM_TimerInitStruct)
	Initializes a timer operating in waveform mode. More...

void	HRTIM_WaveformCaptureConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, uint32_t CaptureUnit, HRTIM_CaptureCfgTypeDef pCaptureCfg)
	Configures the capture unit of a timer operating in waveform mode. More...

void	HRTIM_WaveformCompareConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, uint32_t CompareUnit, HRTIM_CompareCfgTypeDef pCompareCfg)
	Configures the compare unit of a timer operating in waveform mode. More...

void	HRTIM_WaveformCounterStart (HRTIM_TypeDef *HRTIMx, uint32_t TimersToStart)
	Starts the counter of the designated timer(s) operating in waveform mode Timers can be combined (ORed) to allow for simultaneous counter start. More...

void	HRTIM_WaveformCounterStop (HRTIM_TypeDef *HRTIMx, uint32_t TimersToStop)
	Stops the counter of the designated timer(s) operating in waveform mode Timers can be combined (ORed) to allow for simultaneous counter stop. More...

uint32_t	HRTIM_WaveformGetOutputLevel (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t Output)
	Returns actual level (active or inactive) of the designated output. More...

uint32_t	HRTIM_WaveformGetOutputState (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t Output)
	Returns actual state (RUN, IDLE, FAULT) of the designated output. More...

void	HRTIM_WaveformOuputConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, uint32_t Output, HRTIM_OutputCfgTypeDef pOutputCfg)

void	HRTIM_WaveformOutputConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, uint32_t Output, HRTIM_OutputCfgTypeDef pOutputCfg)
	Configures the output of a timer operating in waveform mode. More...

void	HRTIM_WaveformOutputStart (HRTIM_TypeDef *HRTIMx, uint32_t OuputsToStart)
	Enables the generation of the waveform signal on the designated output(s) Outputs can be combined (ORed) to allow for simultaneous output enabling. More...

void	HRTIM_WaveformOutputStop (HRTIM_TypeDef *HRTIM_, uint32_t OuputsToStop)
	Disables the generation of the waveform signal on the designated output(s) Outputs can be combined (ORed) to allow for simultaneous output disabling. More...

void	HRTIM_WaveformSetOutputLevel (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t Output, uint32_t OutputLevel)
	Forces the timer output to its active or inactive state. More...

void	HRTIM_WaveformTimerConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, HRTIM_TimerCfgTypeDef HRTIM_TimerCfgStruct)
	Configures the general behavior of a timer operating in waveform mode. More...

Detailed Description

ADC driver modules.

Macro Definition Documentation

#define __HRTIM_DISABLE	(	__HANDLE__,
		__TIMERS__
	)

Definition at line 2470 of file stm32f30x_hrtim.h.

#define __HRTIM_ENABLE	(	__HANDLE__,
		__TIMERS__
	)	((__HANDLE__)->HRTIM_MASTER.MCR \|= (__TIMERS__))

Enables or disables the timer counter(s)

Parameters

<strong>HANDLE</strong>	specifies the HRTIM Handle.
<strong>TIMERS</strong>	timersto enable/disable This parameter can be any combinations of the following values: HRTIM_TIMERID_MASTER: Master timer identifier HRTIM_TIMERID_TIMER_A: Timer A identifier HRTIM_TIMERID_TIMER_B: Timer B identifier HRTIM_TIMERID_TIMER_C: Timer C identifier HRTIM_TIMERID_TIMER_D: Timer D identifier HRTIM_TIMERID_TIMER_E: Timer E identifier

Return values

None

Definition at line 2461 of file stm32f30x_hrtim.h.

#define CCR_CLEAR_MASK ((uint32_t)0xFFFC10E0)

Definition at line 98 of file stm32f30x_adc.c.

#define CDR_ADDRESS ((uint32_t)0x40012308)

Definition at line 168 of file stm32f4xx_adc.c.

#define CFGR_CLEAR_Mask ((uint32_t)0xFDFFC007)

Definition at line 92 of file stm32f30x_adc.c.

#define CR1_AWDCH_RESET ((uint32_t)0xFFFFFFE0)

Definition at line 125 of file stm32f4xx_adc.c.

#define CR1_AWDMode_RESET ((uint32_t)0xFF3FFDFF)

Definition at line 128 of file stm32f4xx_adc.c.

#define CR1_CLEAR_MASK ((uint32_t)0xFCFFFEFF)

Definition at line 131 of file stm32f4xx_adc.c.

#define CR1_DISCNUM_RESET ((uint32_t)0xFFFF1FFF)

Definition at line 122 of file stm32f4xx_adc.c.

#define CR2_CLEAR_MASK ((uint32_t)0xC0FFF7FD)

Definition at line 143 of file stm32f4xx_adc.c.

#define CR2_EXTEN_RESET ((uint32_t)0xCFFFFFFF)

Definition at line 134 of file stm32f4xx_adc.c.

#define CR2_JEXTEN_RESET ((uint32_t)0xFFCFFFFF)

Definition at line 137 of file stm32f4xx_adc.c.

#define CR2_JEXTSEL_RESET ((uint32_t)0xFFF0FFFF)

Definition at line 140 of file stm32f4xx_adc.c.

#define CR_CLEAR_MASK ((uint32_t)0xFFFC30E0)

Definition at line 171 of file stm32f4xx_adc.c.

#define HRTIM_TAOEN_MASK (HRTIM_OENR_TA2OEN | HRTIM_OENR_TA1OEN)

Definition at line 2465 of file stm32f30x_hrtim.h.

#define HRTIM_TBOEN_MASK (HRTIM_OENR_TB2OEN | HRTIM_OENR_TB1OEN)

Definition at line 2466 of file stm32f30x_hrtim.h.

#define HRTIM_TCOEN_MASK (HRTIM_OENR_TC2OEN | HRTIM_OENR_TC1OEN)

Definition at line 2467 of file stm32f30x_hrtim.h.

#define HRTIM_TDOEN_MASK (HRTIM_OENR_TD2OEN | HRTIM_OENR_TD1OEN)

Definition at line 2468 of file stm32f30x_hrtim.h.

#define HRTIM_TEOEN_MASK (HRTIM_OENR_TE2OEN | HRTIM_OENR_TE1OEN)

Definition at line 2469 of file stm32f30x_hrtim.h.

#define JDR_Offset ((uint8_t)0x80)

Definition at line 101 of file stm32f30x_adc.c.

#define JDR_OFFSET ((uint8_t)0x28)

Definition at line 165 of file stm32f4xx_adc.c.

#define JSQR_CLEAR_Mask ((uint32_t)0x00000000)

Definition at line 95 of file stm32f30x_adc.c.

#define JSQR_JL_RESET ((uint32_t)0xFFCFFFFF)

Definition at line 158 of file stm32f4xx_adc.c.

#define JSQR_JL_SET ((uint32_t)0x00300000)

Definition at line 157 of file stm32f4xx_adc.c.

#define JSQR_JSQ_SET ((uint32_t)0x0000001F)

Definition at line 154 of file stm32f4xx_adc.c.

#define SMPR1_SMP_SET ((uint32_t)0x00000007)

Definition at line 161 of file stm32f4xx_adc.c.

#define SMPR2_SMP_SET ((uint32_t)0x00000007)

Definition at line 162 of file stm32f4xx_adc.c.

#define SQR1_L_RESET ((uint32_t)0xFF0FFFFF)

Definition at line 151 of file stm32f4xx_adc.c.

#define SQR1_SQ_SET ((uint32_t)0x0000001F)

Definition at line 148 of file stm32f4xx_adc.c.

#define SQR2_SQ_SET ((uint32_t)0x0000001F)

Definition at line 147 of file stm32f4xx_adc.c.

#define SQR3_SQ_SET ((uint32_t)0x0000001F)

Definition at line 146 of file stm32f4xx_adc.c.

Function Documentation

void ADC_AnalogWatchdogSingleChannelConfig	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_Channel
	)

Configures the analog watchdog guarded single channel.

Parameters

ADCx where x can be 1, 2 or 3 to select the ADC peripheral.

ADC_Channel

the ADC channel to configure for the analog watchdog. This parameter can be one of the following values:

ADC_Channel_0: ADC Channel0 selected
ADC_Channel_1: ADC Channel1 selected
ADC_Channel_2: ADC Channel2 selected
ADC_Channel_3: ADC Channel3 selected
ADC_Channel_4: ADC Channel4 selected
ADC_Channel_5: ADC Channel5 selected
ADC_Channel_6: ADC Channel6 selected
ADC_Channel_7: ADC Channel7 selected
ADC_Channel_8: ADC Channel8 selected
ADC_Channel_9: ADC Channel9 selected
ADC_Channel_10: ADC Channel10 selected
ADC_Channel_11: ADC Channel11 selected
ADC_Channel_12: ADC Channel12 selected
ADC_Channel_13: ADC Channel13 selected
ADC_Channel_14: ADC Channel14 selected
ADC_Channel_15: ADC Channel15 selected
ADC_Channel_16: ADC Channel16 selected
ADC_Channel_17: ADC Channel17 selected
ADC_Channel_18: ADC Channel18 selected

Return values

None

Parameters

ADCx where x can be 1, 2 or 3 to select the ADC peripheral.

ADC_Channel

the ADC channel to configure for the analog watchdog. This parameter can be one of the following values:

ADC_Channel_0: ADC Channel0 selected
ADC_Channel_1: ADC Channel1 selected
ADC_Channel_2: ADC Channel2 selected
ADC_Channel_3: ADC Channel3 selected
ADC_Channel_4: ADC Channel4 selected
ADC_Channel_5: ADC Channel5 selected
ADC_Channel_6: ADC Channel6 selected
ADC_Channel_7: ADC Channel7 selected
ADC_Channel_8: ADC Channel8 selected
ADC_Channel_9: ADC Channel9 selected
ADC_Channel_10: ADC Channel10 selected
ADC_Channel_11: ADC Channel11 selected
ADC_Channel_12: ADC Channel12 selected
ADC_Channel_13: ADC Channel13 selected
ADC_Channel_14: ADC Channel14 selected
ADC_Channel_15: ADC Channel15 selected
ADC_Channel_16: ADC Channel16 selected
ADC_Channel_17: ADC Channel17 selected

Return values

None

Definition at line 525 of file stm32f4xx_adc.c.

void ADC_AnalogWatchdogThresholdsConfig	(	ADC_TypeDef *	ADCx,
		uint16_t	HighThreshold,
		uint16_t	LowThreshold
	)

Configures the high and low thresholds of the analog watchdog.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
HighThreshold	the ADC analog watchdog High threshold value. This parameter must be a 12-bit value.
LowThreshold	the ADC analog watchdog Low threshold value. This parameter must be a 12-bit value.

Return values

None

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
HighThreshold	the ADC analog watchdog High threshold value. This parameter must be a 12bit value.
LowThreshold	the ADC analog watchdog Low threshold value. This parameter must be a 12bit value.

Return values

None

Definition at line 484 of file stm32f4xx_adc.c.

void ADC_ClearFlag	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_FLAG
	)

Clears the ADCx's pending flags.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_FLAG	specifies the flag to clear. This parameter can be any combination of the following values: ADC_FLAG_AWD: Analog watchdog flag ADC_FLAG_EOC: End of conversion flag ADC_FLAG_JEOC: End of injected group conversion flag ADC_FLAG_JSTRT: Start of injected group conversion flag ADC_FLAG_STRT: Start of regular group conversion flag ADC_FLAG_OVR: Overrun flag

Return values

None

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_FLAG	specifies the flag to clear. This parameter can be any combination of the following values: ADC_FLAG_AWD: Analog watchdog flag ADC_FLAG_EOC: End of conversion flag ADC_FLAG_JEOC: End of injected group conversion flag ADC_FLAG_JSTRT: Start of injected group conversion flag ADC_FLAG_STRT: Start of regular group conversion flag

Return values

None

Definition at line 1652 of file stm32f4xx_adc.c.

void ADC_ClearITPendingBit	(	ADC_TypeDef *	ADCx,
		uint16_t	ADC_IT
	)

Clears the ADCx's interrupt pending bits.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_IT	specifies the ADC interrupt pending bit to clear. This parameter can be one of the following values: ADC_IT_EOC: End of conversion interrupt mask ADC_IT_AWD: Analog watchdog interrupt mask ADC_IT_JEOC: End of injected conversion interrupt mask ADC_IT_OVR: Overrun interrupt mask

Return values

None

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_IT	specifies the ADC interrupt pending bit to clear. This parameter can be any combination of the following values: ADC_IT_EOC: End of conversion interrupt mask ADC_IT_AWD: Analog watchdog interrupt mask ADC_IT_JEOC: End of injected conversion interrupt mask

Return values

None

Definition at line 1714 of file stm32f4xx_adc.c.

void ADC_CommonInit ( ADC_CommonInitTypeDef * ADC_CommonInitStruct )

Initializes the ADCs peripherals according to the specified parameters in the ADC_CommonInitStruct.

Parameters

ADC_CommonInitStruct pointer to an ADC_CommonInitTypeDef structure that contains the configuration information for All ADCs peripherals.

Return values

None

Definition at line 341 of file stm32f4xx_adc.c.

void ADC_ContinuousModeCmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the ADC continuous conversion mode.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
NewState	new state of the selected ADC continuous conversion mode This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 900 of file stm32f4xx_adc.c.

void ADC_DeInit ( void )

Deinitializes all ADCs peripherals registers to their default reset values.

Parameters

None

Return values

None

Definition at line 213 of file stm32f4xx_adc.c.

void ADC_DMARequestAfterLastTransferCmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the ADC DMA request after last transfer (Single-ADC mode)

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
NewState	new state of the selected ADC DMA request after last transfer. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 1072 of file stm32f4xx_adc.c.

void ADC_EOCOnEachRegularChannelCmd	(	ADC_TypeDef *	ADCx,
		FunctionalState	NewState
	)

Enables or disables the EOC on each regular channel conversion.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
NewState	new state of the selected ADC EOC flag rising This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 875 of file stm32f4xx_adc.c.

void ADC_ExternalTrigInjectedConvConfig	(	ADC_TypeDef *	ADCx,
		uint32_t	ADC_ExternalTrigInjecConv
	)

Configures the ADCx external trigger for injected channels conversion.

Parameters

ADCx where x can be 1, 2 or 3 to select the ADC peripheral.

ADC_ExternalTrigInjecConv

specifies the ADC trigger to start injected conversion. This parameter can be one of the following values:

ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected
ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected
ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected
ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected
ADC_ExternalTrigInjecConv_T3_CC2: Timer3 capture compare2 selected
ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected
ADC_ExternalTrigInjecConv_T4_CC1: Timer4 capture compare1 selected
ADC_ExternalTrigInjecConv_T4_CC2: Timer4 capture compare2 selected
ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected
ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected
ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected
ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected
ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected
ADC_ExternalTrigInjecConv_T8_CC3: Timer8 capture compare3 selected
ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected
ADC_ExternalTrigInjecConv_Ext_IT15: External interrupt line 15 event selected

Return values

None

Parameters

ADCx where x can be 1, 2 or 3 to select the ADC peripheral.

ADC_ExternalTrigInjecConv

specifies the ADC trigger to start injected conversion. This parameter can be one of the following values:

ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3)
ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3)
ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2)
ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2)
ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2)
ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2)
ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8 capture compare4 event selected (for ADC1 and ADC2)
ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only)
ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only)
ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only)
ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only)
ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only)
ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not by external trigger (for ADC1, ADC2 and ADC3)

Return values

None

Definition at line 1322 of file stm32f4xx_adc.c.

void ADC_ExternalTrigInjectedConvEdgeConfig	(	ADC_TypeDef *	ADCx,
		uint32_t	ADC_ExternalTrigInjecConvEdge
	)

Configures the ADCx external trigger edge for injected channels conversion.

Parameters

ADCx where x can be 1, 2 or 3 to select the ADC peripheral.

ADC_ExternalTrigInjecConvEdge

specifies the ADC external trigger edge to start injected conversion. This parameter can be one of the following values:

ADC_ExternalTrigInjecConvEdge_None: external trigger disabled for injected conversion
ADC_ExternalTrigInjecConvEdge_Rising: detection on rising edge
ADC_ExternalTrigInjecConvEdge_Falling: detection on falling edge
ADC_ExternalTrigInjecConvEdge_RisingFalling: detection on both rising and falling edge

Return values

None

Definition at line 1356 of file stm32f4xx_adc.c.

FlagStatus ADC_GetFlagStatus	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_FLAG
	)

Checks whether the specified ADC flag is set or not.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_FLAG	specifies the flag to check. This parameter can be one of the following values: ADC_FLAG_AWD: Analog watchdog flag ADC_FLAG_EOC: End of conversion flag ADC_FLAG_JEOC: End of injected group conversion flag ADC_FLAG_JSTRT: Start of injected group conversion flag ADC_FLAG_STRT: Start of regular group conversion flag ADC_FLAG_OVR: Overrun flag

Return values

The	new state of ADC_FLAG (SET or RESET).

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_FLAG	specifies the flag to check. This parameter can be one of the following values: ADC_FLAG_AWD: Analog watchdog flag ADC_FLAG_EOC: End of conversion flag ADC_FLAG_JEOC: End of injected group conversion flag ADC_FLAG_JSTRT: Start of injected group conversion flag ADC_FLAG_STRT: Start of regular group conversion flag

Return values

The	new state of ADC_FLAG (SET or RESET).

Definition at line 1617 of file stm32f4xx_adc.c.

ITStatus ADC_GetITStatus	(	ADC_TypeDef *	ADCx,
		uint16_t	ADC_IT
	)

Checks whether the specified ADC interrupt has occurred or not.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_IT	specifies the ADC interrupt source to check. This parameter can be one of the following values: ADC_IT_EOC: End of conversion interrupt mask ADC_IT_AWD: Analog watchdog interrupt mask ADC_IT_JEOC: End of injected conversion interrupt mask ADC_IT_OVR: Overrun interrupt mask

Return values

The	new state of ADC_IT (SET or RESET).

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_IT	specifies the ADC interrupt source to check. This parameter can be one of the following values: ADC_IT_EOC: End of conversion interrupt mask ADC_IT_AWD: Analog watchdog interrupt mask ADC_IT_JEOC: End of injected conversion interrupt mask

Return values

The	new state of ADC_IT (SET or RESET).

Definition at line 1673 of file stm32f4xx_adc.c.

uint32_t ADC_GetMultiModeConversionValue ( void )

Returns the last ADC1, ADC2 and ADC3 regular conversions results data in the selected multi mode.

Parameters

None

Return values

The	Data conversion value.

Note: In dual mode, the value returned by this function is as following Data[15:0] : these bits contain the regular data of ADC1. Data[31:16]: these bits contain the regular data of ADC2.; In triple mode, the value returned by this function is as following Data[15:0] : these bits contain alternatively the regular data of ADC1, ADC3 and ADC2. Data[31:16]: these bits contain alternatively the regular data of ADC2, ADC1 and ADC3.

Definition at line 1002 of file stm32f4xx_adc.c.

FlagStatus ADC_GetSoftwareStartConvStatus ( ADC_TypeDef * ADCx )

Gets the selected ADC Software start regular conversion Status.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

The	new state of ADC software start conversion (SET or RESET).

Gets the selected ADC Software start regular conversion Status.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

The	new state of ADC software start conversion (SET or RESET).

Definition at line 845 of file stm32f4xx_adc.c.

FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus ( ADC_TypeDef * ADCx )

Gets the selected ADC Software start injected conversion Status.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

The	new state of ADC software start injected conversion (SET or RESET).

Definition at line 1390 of file stm32f4xx_adc.c.

void ADC_InjectedChannelConfig	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_Channel,
		uint8_t	Rank,
		uint8_t	ADC_SampleTime
	)

Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_Channel	the ADC channel to configure. This parameter can be one of the following values: ADC_Channel_0: ADC Channel0 selected ADC_Channel_1: ADC Channel1 selected ADC_Channel_2: ADC Channel2 selected ADC_Channel_3: ADC Channel3 selected ADC_Channel_4: ADC Channel4 selected ADC_Channel_5: ADC Channel5 selected ADC_Channel_6: ADC Channel6 selected ADC_Channel_7: ADC Channel7 selected ADC_Channel_8: ADC Channel8 selected ADC_Channel_9: ADC Channel9 selected ADC_Channel_10: ADC Channel10 selected ADC_Channel_11: ADC Channel11 selected ADC_Channel_12: ADC Channel12 selected ADC_Channel_13: ADC Channel13 selected ADC_Channel_14: ADC Channel14 selected ADC_Channel_15: ADC Channel15 selected ADC_Channel_16: ADC Channel16 selected ADC_Channel_17: ADC Channel17 selected ADC_Channel_18: ADC Channel18 selected
Rank	The rank in the injected group sequencer. This parameter must be between 1 to 4.
ADC_SampleTime	The sample time value to be set for the selected channel. This parameter can be one of the following values: ADC_SampleTime_3Cycles: Sample time equal to 3 cycles ADC_SampleTime_15Cycles: Sample time equal to 15 cycles ADC_SampleTime_28Cycles: Sample time equal to 28 cycles ADC_SampleTime_56Cycles: Sample time equal to 56 cycles ADC_SampleTime_84Cycles: Sample time equal to 84 cycles ADC_SampleTime_112Cycles: Sample time equal to 112 cycles ADC_SampleTime_144Cycles: Sample time equal to 144 cycles ADC_SampleTime_480Cycles: Sample time equal to 480 cycles

Return values

None

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_Channel	the ADC channel to configure. This parameter can be one of the following values: ADC_Channel_0: ADC Channel0 selected ADC_Channel_1: ADC Channel1 selected ADC_Channel_2: ADC Channel2 selected ADC_Channel_3: ADC Channel3 selected ADC_Channel_4: ADC Channel4 selected ADC_Channel_5: ADC Channel5 selected ADC_Channel_6: ADC Channel6 selected ADC_Channel_7: ADC Channel7 selected ADC_Channel_8: ADC Channel8 selected ADC_Channel_9: ADC Channel9 selected ADC_Channel_10: ADC Channel10 selected ADC_Channel_11: ADC Channel11 selected ADC_Channel_12: ADC Channel12 selected ADC_Channel_13: ADC Channel13 selected ADC_Channel_14: ADC Channel14 selected ADC_Channel_15: ADC Channel15 selected ADC_Channel_16: ADC Channel16 selected ADC_Channel_17: ADC Channel17 selected
Rank	The rank in the injected group sequencer. This parameter must be between 1 and 4.
ADC_SampleTime	The sample time value to be set for the selected channel. This parameter can be one of the following values: ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles

Return values

None

Definition at line 1186 of file stm32f4xx_adc.c.

void ADC_InjectedSequencerLengthConfig	(	ADC_TypeDef *	ADCx,
		uint8_t	Length
	)

Configures the sequencer length for injected channels.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
Length	The sequencer length. This parameter must be a number between 1 to 4.

Return values

None

Definition at line 1249 of file stm32f4xx_adc.c.

void ADC_ITConfig	(	ADC_TypeDef *	ADCx,
		uint16_t	ADC_IT,
		FunctionalState	NewState
	)

Enables or disables the specified ADC interrupts.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_IT	specifies the ADC interrupt sources to be enabled or disabled. This parameter can be one of the following values: ADC_IT_EOC: End of conversion interrupt mask ADC_IT_AWD: Analog watchdog interrupt mask ADC_IT_JEOC: End of injected conversion interrupt mask ADC_IT_OVR: Overrun interrupt enable
NewState	new state of the specified ADC interrupts. This parameter can be: ENABLE or DISABLE.

Return values

None

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_IT	specifies the ADC interrupt sources to be enabled or disabled. This parameter can be any combination of the following values: ADC_IT_EOC: End of conversion interrupt mask ADC_IT_AWD: Analog watchdog interrupt mask ADC_IT_JEOC: End of injected conversion interrupt mask
NewState	new state of the specified ADC interrupts. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 1580 of file stm32f4xx_adc.c.

void ADC_MultiModeDMARequestAfterLastTransferCmd ( FunctionalState NewState )

Enables or disables the ADC DMA request after last transfer in multi ADC mode.

Parameters

NewState new state of the selected ADC DMA request after last transfer. This parameter can be: ENABLE or DISABLE.

Note: if Enabled, DMA requests are issued as long as data are converted and DMA mode for multi ADC mode (selected using ADC_CommonInit() function by ADC_CommonInitStruct.ADC_DMAAccessMode structure member) is ADC_DMAAccessMode_1, ADC_DMAAccessMode_2 or ADC_DMAAccessMode_3.

Return values

None

Definition at line 1099 of file stm32f4xx_adc.c.

void ADC_SetInjectedOffset	(	ADC_TypeDef *	ADCx,
		uint8_t	ADC_InjectedChannel,
		uint16_t	Offset
	)

Set the injected channels conversion value offset.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.
ADC_InjectedChannel	the ADC injected channel to set its offset. This parameter can be one of the following values: ADC_InjectedChannel_1: Injected Channel1 selected ADC_InjectedChannel_2: Injected Channel2 selected ADC_InjectedChannel_3: Injected Channel3 selected ADC_InjectedChannel_4: Injected Channel4 selected
Offset	the offset value for the selected ADC injected channel This parameter must be a 12bit value.

Return values

None

Definition at line 1284 of file stm32f4xx_adc.c.

void ADC_SoftwareStartConv ( ADC_TypeDef * ADCx )

Enables the selected ADC software start conversion of the regular channels.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

None

Definition at line 831 of file stm32f4xx_adc.c.

void ADC_SoftwareStartInjectedConv ( ADC_TypeDef * ADCx )

Enables the selected ADC software start conversion of the injected channels.

Parameters

ADCx	where x can be 1, 2 or 3 to select the ADC peripheral.

Return values

None

Definition at line 1377 of file stm32f4xx_adc.c.

void ADC_TempSensorVrefintCmd ( FunctionalState NewState )

Enables or disables the temperature sensor and Vrefint channels.

Parameters

NewState new state of the temperature sensor and Vrefint channels. This parameter can be: ENABLE or DISABLE.

Return values

None	Enables or disables the temperature sensor and Vrefint channels.

Parameters

NewState new state of the temperature sensor. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 589 of file stm32f4xx_adc.c.

void ADC_VBATCmd ( FunctionalState NewState )

Enables or disables the VBAT (Voltage Battery) channel.

Parameters

NewState new state of the VBAT channel. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 611 of file stm32f4xx_adc.c.

void HRTIM_ADCTriggerConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	ADCTrigger,
		HRTIM_ADCTriggerCfgTypeDef *	pADCTriggerCfg
	)

Configures both the ADC trigger register update source and the ADC trigger source.

Parameters

HRTIMx	pointer to HRTIMx peripheral
ADC	trigger: ADC trigger to configure This parameter can be one of the following values: HRTIM_ADCTRIGGER_1: ADC trigger 1 HRTIM_ADCTRIGGER_2: ADC trigger 2 HRTIM_ADCTRIGGER_3: ADC trigger 3 HRTIM_ADCTRIGGER_4: ADC trigger 4
pADCTriggerCfg	pointer to the ADC trigger configuration structure

Return values

None

Definition at line 2814 of file stm32f30x_hrtim.c.

void HRTIM_BurstDMAConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	RegistersToUpdate
	)

Configures the burst DMA controller for a timer.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x5 for master timer 0x0 to 0x4 for timers A to E
RegistersToUpdate	registers to be written by DMA This parameter can be any combination of the following values: HRTIM_BURSTDMA_CR: HRTIM_MCR or HRTIM_TIMxCR HRTIM_BURSTDMA_ICR: HRTIM_MICR or HRTIM_TIMxICR HRTIM_BURSTDMA_DIER: HRTIM_MDIER or HRTIM_TIMxDIER HRTIM_BURSTDMA_CNT: HRTIM_MCNT or HRTIM_TIMxCNT HRTIM_BURSTDMA_PER: HRTIM_MPER or HRTIM_TIMxPER HRTIM_BURSTDMA_REP: HRTIM_MREP or HRTIM_TIMxREP HRTIM_BURSTDMA_CMP1: HRTIM_MCMP1 or HRTIM_TIMxCMP1 HRTIM_BURSTDMA_CMP2: HRTIM_MCMP2 or HRTIM_TIMxCMP2 HRTIM_BURSTDMA_CMP3: HRTIM_MCMP3 or HRTIM_TIMxCMP3 HRTIM_BURSTDMA_CMP4: HRTIM_MCMP4 or HRTIM_TIMxCMP4 HRTIM_BURSTDMA_DTR: HRTIM_TIMxDTR HRTIM_BURSTDMA_SET1R: HRTIM_TIMxSET1R HRTIM_BURSTDMA_RST1R: HRTIM_TIMxRST1R HRTIM_BURSTDMA_SET2R: HRTIM_TIMxSET2R HRTIM_BURSTDMA_RST2R: HRTIM_TIMxRST2R HRTIM_BURSTDMA_EEFR1: HRTIM_TIMxEEFR1 HRTIM_BURSTDMA_EEFR2: HRTIM_TIMxEEFR2 HRTIM_BURSTDMA_RSTR: HRTIM_TIMxRSTR HRTIM_BURSTDMA_CHPR: HRTIM_TIMxCHPR HRTIM_BURSTDMA_OUTR: HRTIM_TIMxOUTR HRTIM_BURSTDMA_FLTR: HRTIM_TIMxFLTR

Return values

None

Definition at line 2428 of file stm32f30x_hrtim.c.

void HRTIM_BurstModeConfig	(	HRTIM_TypeDef *	HRTIMx,
		HRTIM_BurstModeCfgTypeDef *	pBurstModeCfg
	)

Configures the burst mode feature of the HRTIMx.

Parameters

HRTIMx	pointer to HRTIMx peripheral
pBurstModeCfg	pointer to the burst mode configuration structure

Return values

None

Definition at line 2512 of file stm32f30x_hrtim.c.

void HRTIM_BurstModeCtl	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	Enable
	)

Enables or disables the HRTIMx burst mode controller.

Parameters

HRTIMx	pointer to HRTIMx peripheral
Enable	Burst mode controller enabling This parameter can be one of the following values: HRTIM_BURSTMODECTL_ENABLED: Burst mode enabled HRTIM_BURSTMODECTL_DISABLED: Burst mode disabled

Return values

None

Definition at line 2882 of file stm32f30x_hrtim.c.

void HRTIM_ChopperModeConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		HRTIM_ChopperModeCfgTypeDef *	pChopperModeCfg
	)

Configures the chopper mode feature for a timer.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
pChopperModeCfg	pointer to the chopper mode configuration structure

Return values

None

Definition at line 2373 of file stm32f30x_hrtim.c.

void HRTIM_ClearCommonFlag	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	HRTIM_CommonFLAG
	)

Clears the common interrupt flags.

Parameters

HRTIMx pointer to HRTIMx peripheral

HRTIM_FLAG

specifies the HRTIM flags to be cleared. This parameter can be any combination of the following values:

HRTIM_FLAG_FLT1: Fault 1 interrupt flag
HRTIM_FLAG_FLT2: Fault 2 interrupt flag
HRTIM_FLAG_FLT3: Fault 3 interrupt Interrupt flag
HRTIM_FLAG_FLT4: Fault 4 Interrupt flag
HRTIM_FLAG_FLT5: Fault 5 Interrupt flag
HRTIM_FLAG_SYSFLT: System Fault Interrupt flag
HRTIM_FLAG_DLLRDY: DLL ready Interrupt flag
HRTIM_FLAG_BMPER: Burst mode period Interrupt flag

Return values

None

Definition at line 1035 of file stm32f30x_hrtim.c.

void HRTIM_ClearCommonITPendingBit	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	HRTIM_CommonIT
	)

Clears the common interrupt pending bits.

Parameters

HRTIMx pointer to HRTIMx peripheral

HRTIM_IT

specifies the HRTIM interrupts sources to be cleared. This parameter can be any combination of the following values:

HRTIM_IT_FLT1: Fault 1 interrupt source
HRTIM_IT_FLT2: Fault 2 interrupt source
HRTIM_IT_FLT3: Fault 3 interrupt Interrupt source
HRTIM_IT_FLT4: Fault 4 Interrupt source
HRTIM_IT_FLT5: Fault 5 Interrupt source
HRTIM_IT_SYSFLT: System Fault Interrupt source
HRTIM_IT_DLLRDY: DLL ready Interrupt source
HRTIM_IT_BMPER: Burst mode period Interrupt source

Return values

None

Definition at line 1112 of file stm32f30x_hrtim.c.

void HRTIM_ClearFlag	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	HRTIM_FLAG
	)

Clears the Master and slaves interrupt flags.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
HRTIM_FLAG	specifies the HRTIM flags sources to be cleared. This parameter can be any combination of the following values: HRTIM_MASTER_FLAG_MCMP1: Master compare 1 interrupt flag HRTIM_MASTER_FLAG_MCMP2: Master compare 2 interrupt flag HRTIM_MASTER_FLAG_MCMP3: Master compare 3 interrupt Interrupt flag HRTIM_MASTER_FLAG_MCMP4: Master compare 4 Interrupt flag HRTIM_MASTER_FLAG_MREP: Master Repetition Interrupt flag HRTIM_MASTER_FLAG_SYNC: Synchronization input Interrupt flag HRTIM_MASTER_FLAG_MUPD: Master update Interrupt flag HRTIM_TIM_FLAG_CMP1: Timer compare 1 Interrupt flag HRTIM_TIM_FLAG_CMP2: Timer compare 2 Interrupt flag HRTIM_TIM_FLAG_CMP3: Timer compare 3 Interrupt flag HRTIM_TIM_FLAG_CMP4: Timer compare 4 Interrupt flag HRTIM_TIM_FLAG_REP: Timer repetition Interrupt flag HRTIM_TIM_FLAG_UPD: Timer update Interrupt flag HRTIM_TIM_FLAG_CPT1: Timer capture 1 Interrupt flag HRTIM_TIM_FLAG_CPT2: Timer capture 2 Interrupt flag HRTIM_TIM_FLAG_SET1: Timer output 1 set Interrupt flag HRTIM_TIM_FLAG_RST1: Timer output 1 reset Interrupt flag HRTIM_TIM_FLAG_SET2: Timer output 2 set Interrupt flag HRTIM_TIM_FLAG_RST2: Timer output 2 reset Interrupt flag HRTIM_TIM_FLAG_RST: Timer reset Interrupt flag HRTIM_TIM_FLAG_DLYPRT1: Timer delay protection Interrupt flag

Return values

None

Definition at line 994 of file stm32f30x_hrtim.c.

void HRTIM_ClearITPendingBit	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	HRTIM_IT
	)

Clears the Master and slaves interrupt request pending bits.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
HRTIM_IT	specifies the HRTIM interrupts sources to be enabled or disabled. This parameter can be any combination of the following values: HRTIM_MASTER_IT_MCMP1: Master compare 1 interrupt source HRTIM_MASTER_IT_MCMP2: Master compare 2 interrupt source HRTIM_MASTER_IT_MCMP3: Master compare 3 interrupt Interrupt source HRTIM_MASTER_IT_MCMP4: Master compare 4 Interrupt source HRTIM_MASTER_IT_MREP: Master Repetition Interrupt source HRTIM_MASTER_IT_SYNC: Synchronization input Interrupt source HRTIM_MASTER_IT_MUPD: Master update Interrupt source HRTIM_TIM_IT_CMP1: Timer compare 1 Interrupt source HRTIM_TIM_IT_CMP2: Timer compare 2 Interrupt source HRTIM_TIM_IT_CMP3: Timer compare 3 Interrupt source HRTIM_TIM_IT_CMP4: Timer compare 4 Interrupt source HRTIM_TIM_IT_REP: Timer repetition Interrupt source HRTIM_TIM_IT_UPD: Timer update Interrupt source HRTIM_TIM_IT_CPT1: Timer capture 1 Interrupt source HRTIM_TIM_IT_CPT2: Timer capture 2 Interrupt source HRTIM_TIM_IT_SET1: Timer output 1 set Interrupt source HRTIM_TIM_IT_RST1: Timer output 1 reset Interrupt source HRTIM_TIM_IT_SET2: Timer output 2 set Interrupt source HRTIM_TIM_IT_RST2: Timer output 2 reset Interrupt source HRTIM_TIM_IT_RST: Timer reset Interrupt source HRTIM_TIM_IT_DLYPRT: Timer delay protection Interrupt source

Return values

None

Definition at line 1071 of file stm32f30x_hrtim.c.

void HRTIM_DeadTimeConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		HRTIM_DeadTimeCfgTypeDef *	pDeadTimeCfg
	)

Configures the dead time insertion feature for a timer.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
pDeadTimeCfg	pointer to the dead time insertion configuration structure

Return values

None

Definition at line 2327 of file stm32f30x_hrtim.c.

void HRTIM_DeInit ( HRTIM_TypeDef * HRTIMx )

De-initializes a timer operating in all mode.

Parameters

HRTIMx pointer to HRTIMx peripheral

Return values

None

Definition at line 255 of file stm32f30x_hrtim.c.

void HRTIM_DLLCalibrationStart	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	CalibrationRate
	)

Starts the DLL calibration.

Parameters

HRTIMx	pointer to HRTIMx peripheral
CalibrationRate	DLL calibration period This parameter can be one of the following values: HRTIM_SINGLE_CALIBRATION: One shot DLL calibration HRTIM_CALIBRATIONRATE_7300: 7.3 ms HRTIM_CALIBRATIONRATE_910: 910 us HRTIM_CALIBRATIONRATE_114: 114 us HRTIM_CALIBRATIONRATE_14: 14 us

Return values

None

Definition at line 424 of file stm32f30x_hrtim.c.

void HRTIM_DMACmd	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	HRTIM_DMA,
		FunctionalState	NewState
	)

Enables or disables the HRTIMx's DMA Requests.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
HRTIM_DMA	specifies the DMA Request sources. This parameter can be any combination of the following values: HRTIM_MASTER_DMA_MCMP1: Master compare 1 DMA request source HRTIM_MASTER_DMA_MCMP2: Master compare 2 DMA request source HRTIM_MASTER_DMA_MCMP3: Master compare 3 DMA request source HRTIM_MASTER_DMA_MCMP4: Master compare 4 DMA request source HRTIM_MASTER_DMA_MREP: Master Repetition DMA request source HRTIM_MASTER_DMA_SYNC: Synchronization input DMA request source HRTIM_MASTER_DMA_MUPD:Master update DMA request source HRTIM_TIM_DMA_CMP1: Timer compare 1 DMA request source HRTIM_TIM_DMA_CMP2: Timer compare 2 DMA request source HRTIM_TIM_DMA_CMP3: Timer compare 3 DMA request source HRTIM_TIM_DMA_CMP4: Timer compare 4 DMA request source HRTIM_TIM_DMA_REP: Timer repetition DMA request source HRTIM_TIM_DMA_UPD: Timer update DMA request source HRTIM_TIM_DMA_CPT1: Timer capture 1 DMA request source HRTIM_TIM_DMA_CPT2: Timer capture 2 DMA request source HRTIM_TIM_DMA_SET1: Timer output 1 set DMA request source HRTIM_TIM_DMA_RST1: Timer output 1 reset DMA request source HRTIM_TIM_DMA_SET2: Timer output 2 set DMA request source HRTIM_TIM_DMA_RST2: Timer output 2 reset DMA request source HRTIM_TIM_DMA_RST: Timer reset DMA request source HRTIM_TIM_DMA_DLYPRT: Timer delay protection DMA request source
NewState	new state of the DMA Request sources. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 1373 of file stm32f30x_hrtim.c.

void HRTIM_EventConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	Event,
		HRTIM_EventCfgTypeDef *	pEventCfg
	)

Configures the conditioning of an external event.

Parameters

HRTIMx	pointer to HRTIMx peripheral
Event	external event to configure This parameter can be one of the following values: HRTIM_EVENT_1: External event 1 HRTIM_EVENT_2: External event 2 HRTIM_EVENT_3: External event 3 HRTIM_EVENT_4: External event 4 HRTIM_EVENT_5: External event 5 HRTIM_EVENT_6: External event 6 HRTIM_EVENT_7: External event 7 HRTIM_EVENT_8: External event 8 HRTIM_EVENT_9: External event 9 HRTIM_EVENT_10: External event 10
pEventCfg	pointer to the event conditioning configuration structure

Return values

None

Definition at line 2572 of file stm32f30x_hrtim.c.

void HRTIM_EventPrescalerConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	Prescaler
	)

Configures the external event conditioning block prescaler.

Parameters

HRTIMx	pointer to HRTIMx peripheral
Prescaler	Prescaler value This parameter can be one of the following values: HRTIM_EVENTPRESCALER_DIV1: fEEVS=fHRTIMx HRTIM_EVENTPRESCALER_DIV2: fEEVS=fHRTIMx / 2 HRTIM_EVENTPRESCALER_DIV4: fEEVS=fHRTIMx / 4 HRTIM_EVENTPRESCALER_DIV8: fEEVS=fHRTIMx / 8

Return values

None

Definition at line 2599 of file stm32f30x_hrtim.c.

void HRTIM_FaultConfig	(	HRTIM_TypeDef *	HRTIMx,
		HRTIM_FaultCfgTypeDef *	pFaultCfg,
		uint32_t	Fault
	)

Configures the conditioning of fault input.

Parameters

HRTIMx	pointer to HRTIMx peripheral
Fault	fault input to configure This parameter can be one of the following values: HRTIM_FAULT_1: Fault input 1 HRTIM_FAULT_2: Fault input 2 HRTIM_FAULT_3: Fault input 3 HRTIM_FAULT_4: Fault input 4 HRTIM_FAULT_5: Fault input 5
pFaultCfg	pointer to the fault conditioning configuration structure

Return values

None

Definition at line 2629 of file stm32f30x_hrtim.c.

void HRTIM_FaultModeCtl	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	Fault,
		uint32_t	Enable
	)

Enables or disables the HRTIMx Fault mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
Fault	fault input to configure This parameter can be one of the following values: HRTIM_FAULT_1: Fault input 1 HRTIM_FAULT_2: Fault input 2 HRTIM_FAULT_3: Fault input 3 HRTIM_FAULT_4: Fault input 4 HRTIM_FAULT_5: Fault input 5
Enable	Fault mode controller enabling This parameter can be one of the following values: HRTIM_FAULT_ENABLED: Fault mode enabled HRTIM_FAULT_DISABLED: Fault mode disabled

Return values

None

Definition at line 2747 of file stm32f30x_hrtim.c.

void HRTIM_FaultPrescalerConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	Prescaler
	)

Configures the fault conditioning block prescaler.

Parameters

HRTIMx	pointer to HRTIMx peripheral
Prescaler	Prescaler value This parameter can be one of the following values: HRTIM_FAULTPRESCALER_DIV1: fFLTS=fHRTIMx HRTIM_FAULTPRESCALER_DIV2: fFLTS=fHRTIMx / 2 HRTIM_FAULTPRESCALER_DIV4: fFLTS=fHRTIMx / 4 HRTIM_FAULTPRESCALER_DIV8: fFLTS=fHRTIMx / 8

Return values

None

Definition at line 2714 of file stm32f30x_hrtim.c.

uint32_t HRTIM_GetBurstStatus ( HRTIM_TypeDef * HRTIMx )

Returns the actual status (active or inactive) of the burst mode controller.

Parameters

HRTIMx pointer to HRTIMx peripheral

Return values

Burst mode controller status

Definition at line 3401 of file stm32f30x_hrtim.c.

uint32_t HRTIM_GetCapturedValue	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	CaptureUnit
	)

Returns actual value of the capture register of the designated capture unit.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
CaptureUnit	Capture unit to trig This parameter can be one of the following values: HRTIM_CAPTUREUNIT_1: Capture unit 1 HRTIM_CAPTUREUNIT_2: Capture unit 2

Return values

Captured value

Definition at line 3101 of file stm32f30x_hrtim.c.

FlagStatus HRTIM_GetCommonFlagStatus	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	HRTIM_CommonFLAG
	)

Checks whether the specified HRTIM common flag is set or not.

Parameters

HRTIMx pointer to HRTIMx peripheral

HRTIM_FLAG

specifies the HRTIM flags to check. This parameter can be any combination of the following values:

HRTIM_FLAG_FLT1: Fault 1 interrupt flag
HRTIM_FLAG_FLT2: Fault 2 interrupt flag
HRTIM_FLAG_FLT3: Fault 3 interrupt Interrupt flag
HRTIM_FLAG_FLT4: Fault 4 Interrupt flag
HRTIM_FLAG_FLT5: Fault 5 Interrupt flag
HRTIM_FLAG_SYSFLT: System Fault Interrupt flag
HRTIM_FLAG_DLLRDY: DLL ready Interrupt flag
HRTIM_FLAG_BMPER: Burst mode period Interrupt flag

Return values

The	new state of HRTIM_FLAG (SET or RESET).

Definition at line 1208 of file stm32f30x_hrtim.c.

ITStatus HRTIM_GetCommonITStatus	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	HRTIM_CommonIT
	)

Checks whether the specified HRTIM common interrupt has occurred or not.

Parameters

HRTIMx pointer to HRTIMx peripheral

HRTIM_IT

specifies the HRTIM interrupt source to check. This parameter can be any combination of the following values:

HRTIM_IT_FLT1: Fault 1 interrupt
HRTIM_IT_FLT2: Fault 2 interrupt
HRTIM_IT_FLT3: Fault 3 interrupt Interrupt
HRTIM_IT_FLT4: Fault 4 Interrupt
HRTIM_IT_FLT5: Fault 5 Interrupt
HRTIM_IT_SYSFLT: System Fault Interrupt
HRTIM_IT_DLLRDY: DLL ready Interrupt flag
HRTIM_IT_BMPER: Burst mode period Interrupt

Return values

The	new state of HRTIM_FLAG (SET or RESET).

Definition at line 1320 of file stm32f30x_hrtim.c.

uint32_t HRTIM_GetCurrentPushPullStatus	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx
	)

Indicates on which output the signal is currently active (when the push pull mode is enabled)

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E

Return values

Burst mode controller status

Definition at line 3420 of file stm32f30x_hrtim.c.

uint32_t HRTIM_GetDelayedProtectionStatus	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Output
	)

Returns the level (active or inactive) of the designated output when the delayed protection was triggered.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
Output	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TD1: Timer E - Output 1 HRTIM_OUTPUT_TD2: Timer E - Output 2

Return values

Delayed protection status

Definition at line 3341 of file stm32f30x_hrtim.c.

FlagStatus HRTIM_GetFlagStatus	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	HRTIM_FLAG
	)

Checks whether the specified HRTIM flag is set or not.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
HRTIM_FLAG	specifies the HRTIM flags to check. This parameter can be any combination of the following values: HRTIM_MASTER_FLAG_MCMP1: Master compare 1 interrupt flag HRTIM_MASTER_FLAG_MCMP2: Master compare 2 interrupt flag HRTIM_MASTER_FLAG_MCMP3: Master compare 3 interrupt Interrupt flag HRTIM_MASTER_FLAG_MCMP4: Master compare 4 Interrupt flag HRTIM_MASTER_FLAG_MREP: Master Repetition Interrupt flag HRTIM_MASTER_FLAG_SYNC: Synchronization input Interrupt flag HRTIM_MASTER_FLAG_MUPD: Master update Interrupt flag HRTIM_TIM_FLAG_CMP1: Timer compare 1 Interrupt flag HRTIM_TIM_FLAG_CMP2: Timer compare 2 Interrupt flag HRTIM_TIM_FLAG_CMP3: Timer compare 3 Interrupt flag HRTIM_TIM_FLAG_CMP4: Timer compare 4 Interrupt flag HRTIM_TIM_FLAG_REP: Timer repetition Interrupt flag HRTIM_TIM_FLAG_UPD: Timer update Interrupt flag HRTIM_TIM_FLAG_CPT1: Timer capture 1 Interrupt flag HRTIM_TIM_FLAG_CPT2: Timer capture 2 Interrupt flag HRTIM_TIM_FLAG_SET1: Timer output 1 set Interrupt flag HRTIM_TIM_FLAG_RST1: Timer output 1 reset Interrupt flag HRTIM_TIM_FLAG_SET2: Timer output 2 set Interrupt flag HRTIM_TIM_FLAG_RST2: Timer output 2 reset Interrupt flag HRTIM_TIM_FLAG_RST: Timer reset Interrupt flag HRTIM_TIM_FLAG_DLYPRT: Timer delay protection Interrupt flag

Return values

The	new state of HRTIM_FLAG (SET or RESET).

Definition at line 1149 of file stm32f30x_hrtim.c.

uint32_t HRTIM_GetIdlePushPullStatus	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx
	)

Indicates on which output the signal was applied, in push-pull mode balanced fault mode or delayed idle mode, when the protection was triggered.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E

Return values

Idle	Push Pull Status

Definition at line 3444 of file stm32f30x_hrtim.c.

ITStatus HRTIM_GetITStatus	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	HRTIM_IT
	)

Checks whether the specified HRTIM interrupt has occurred or not.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
HRTIM_IT	specifies the HRTIM flags sources to be cleared. This parameter can be any combination of the following values: HRTIM_MASTER_IT_MCMP1: Master compare 1 interrupt HRTIM_MASTER_IT_MCMP2: Master compare 2 interrupt HRTIM_MASTER_IT_MCMP3: Master compare 3 interrupt Interrupt HRTIM_MASTER_IT_MCMP4: Master compare 4 Interrupt HRTIM_MASTER_IT_MREP: Master Repetition Interrupt HRTIM_MASTER_IT_SYNC: Synchronization input Interrupt HRTIM_MASTER_IT_MUPD: Master update Interrupt HRTIM_TIM_IT_CMP1: Timer compare 1 Interrupt HRTIM_TIM_IT_CMP2: Timer compare 2 Interrupt HRTIM_TIM_IT_CMP3: Timer compare 3 Interrupt HRTIM_TIM_IT_CMP4: Timer compare 4 Interrupt HRTIM_TIM_IT_REP: Timer repetition Interrupt HRTIM_TIM_IT_UPD: Timer update Interrupt HRTIM_TIM_IT_CPT1: Timer capture 1 Interrupt HRTIM_TIM_IT_CPT2: Timer capture 2 Interrupt HRTIM_TIM_IT_SET1: Timer output 1 set Interrupt HRTIM_TIM_IT_RST1: Timer output 1 reset Interrupt HRTIM_TIM_IT_SET2: Timer output 2 set Interrupt HRTIM_TIM_IT_RST2: Timer output 2 reset Interrupt HRTIM_TIM_IT_RST: Timer reset Interrupt HRTIM_TIM_IT_DLYPRT: Timer delay protection Interrupt

Return values

The	new state of the HRTIM_IT(SET or RESET).

Definition at line 1254 of file stm32f30x_hrtim.c.

void HRTIM_ITCommonConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	HRTIM_CommonIT,
		FunctionalState	NewState
	)

Enables or disables the common interrupt request.

Parameters

HRTIMx	pointer to HRTIMx peripheral
HRTIM_IT	specifies the HRTIM interrupts sources to be enabled or disabled. This parameter can be any combination of the following values: HRTIM_IT_FLT1: Fault 1 interrupt source HRTIM_IT_FLT2: Fault 2 interrupt source HRTIM_IT_FLT3: Fault 3 interrupt Interrupt source HRTIM_IT_FLT4: Fault 4 Interrupt source HRTIM_IT_FLT5: Fault 5 Interrupt source HRTIM_IT_SYSFLT: System Fault Interrupt source HRTIM_IT_DLLRDY: DLL ready Interrupt source HRTIM_IT_BMPER: Burst mode period Interrupt source
NewState	new state of the TIM interrupts. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 951 of file stm32f30x_hrtim.c.

void HRTIM_ITConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	HRTIM_IT,
		FunctionalState	NewState
	)

Enables or disables the Master and slaves interrupt request.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
HRTIM_IT	specifies the HRTIM interrupts sources to be enabled or disabled. This parameter can be any combination of the following values: HRTIM_MASTER_IT_MCMP1: Master compare 1 interrupt source HRTIM_MASTER_IT_MCMP2: Master compare 2 interrupt source HRTIM_MASTER_IT_MCMP3: Master compare 3 interrupt Interrupt source HRTIM_MASTER_IT_MCMP4: Master compare 4 Interrupt source HRTIM_MASTER_IT_MREP: Master Repetition Interrupt source HRTIM_MASTER_IT_SYNC: Synchronization input Interrupt source HRTIM_MASTER_IT_MUPD: Master update Interrupt source HRTIM_TIM_IT_CMP1: Timer compare 1 Interrupt source HRTIM_TIM_IT_CMP2: Timer compare 2 Interrupt source HRTIM_TIM_IT_CMP3: Timer compare 3 Interrupt source HRTIM_TIM_IT_CMP4: Timer compare 4 Interrupt source HRTIM_TIM_IT_REP: Timer repetition Interrupt source HRTIM_TIM_IT_UPD: Timer update Interrupt source HRTIM_TIM_IT_CPT1: Timer capture 1 Interrupt source HRTIM_TIM_IT_CPT2: Timer capture 2 Interrupt source HRTIM_TIM_IT_SET1: Timer output 1 set Interrupt source HRTIM_TIM_IT_RST1: Timer output 1 reset Interrupt source HRTIM_TIM_IT_SET2: Timer output 2 set Interrupt source HRTIM_TIM_IT_RST2: Timer output 2 reset Interrupt source HRTIM_TIM_IT_RST: Timer reset Interrupt source HRTIM_TIM_IT_DLYPRT1: Timer delay protection Interrupt source
NewState	new state of the TIM interrupts. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 894 of file stm32f30x_hrtim.c.

void HRTIM_MasterSetCompare	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	CompareUnit,
		uint32_t	Compare
	)

Sets the HRTIMx Master Comparex Register value.

Parameters

HRTIMx	pointer to HRTIMx peripheral
CompareUnit	Compare unit to configure This parameter can be one of the following values: HRTIM_COMPAREUNIT_1: Compare unit 1 HRTIM_COMPAREUNIT_2: Compare unit 2 HRTIM_COMPAREUNIT_3: Compare unit 3 HRTIM_COMPAREUNIT_4: Compare unit 4
Compare	specifies the Comparex register new value

Return values

None

Definition at line 2025 of file stm32f30x_hrtim.c.

void HRTIM_SimpleBase_Init	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		HRTIM_BaseInitTypeDef *	HRTIM_BaseInitStruct
	)

Initializes the HRTIMx timer in basic time base mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 for master timer 0x1 to 0x5 for timers A to E

Note: The time-base unit initialization parameters specify: The timer counter operating mode (continuous, one shot) The timer clock prescaler The timer period The timer repetition counter.

Return values

None

Definition at line 228 of file stm32f30x_hrtim.c.

void HRTIM_SimpleBaseStart	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx
	)

Starts the counter of a timer operating in basic time base mode.

Parameters

HRTIMx	pointer to HRTIM peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x5 for master timer 0x0 to 0x4 for timers A to E

Return values

None

Definition at line 460 of file stm32f30x_hrtim.c.

void HRTIM_SimpleBaseStop	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx
	)

Stops the counter of a timer operating in basic time base mode.

Parameters

HRTIMx	pointer to HRTIM peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x5 for master timer 0x0 to 0x4 for timers A to E

Return values

None

Definition at line 478 of file stm32f30x_hrtim.c.

void HRTIM_SimpleCapture_Init	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		HRTIM_BaseInitTypeDef *	HRTIM_BaseInitStruct
	)

Initializes a timer operating in basic capture mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x1 to 0x5 for timers A to E

Return values

None

Definition at line 313 of file stm32f30x_hrtim.c.

void HRTIM_SimpleCaptureChannelConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	CaptureChannel,
		HRTIM_BasicCaptureChannelCfgTypeDef *	pBasicCaptureChannelCfg
	)

Configures a basic capture.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
CaptureChannel	Capture unit This parameter can be one of the following values: HRTIM_CAPTUREUNIT_1: Capture unit 1 HRTIM_CAPTUREUNIT_2: Capture unit 2
pBasicCaptureChannelCfg	pointer to the basic capture configuration structure

Note: When the timer operates in basic capture mode the capture is triggered by the designated external event and GPIO input is implicitly used as event source. The cature can be triggered by a rising edge, a falling edge or both edges on event channel.

Return values

None

Definition at line 1678 of file stm32f30x_hrtim.c.

void HRTIM_SimpleCaptureStart	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	CaptureChannel
	)

Enables a basic capture on the designed capture unit.

Parameters

HRTIMx	pointer to HRTIM peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
CaptureChannel	Timer output This parameter can be one of the following values: HRTIM_CAPTUREUNIT_1: Capture unit 1 HRTIM_CAPTUREUNIT_2: Capture unit 2

Return values

None

Note: The external event triggering the capture is available for all timing units. It can be used directly and is active as soon as the timing unit counter is enabled.

Definition at line 643 of file stm32f30x_hrtim.c.

void HRTIM_SimpleCaptureStop	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	CaptureChannel
	)

Disables a basic capture on the designed capture unit.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
CaptureChannel	Timer output This parameter can be one of the following values: HRTIM_CAPTUREUNIT_1: Capture unit 1 HRTIM_CAPTUREUNIT_2: Capture unit 2

Return values

None

Definition at line 667 of file stm32f30x_hrtim.c.

void HRTIM_SimpleOC_Init	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		HRTIM_BaseInitTypeDef *	HRTIM_BaseInitStruct
	)

Initializes the HRTIMx timer in basic output compare mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x1 to 0x5 for timers A to E

Note: Initializes the time-base unit of the timer and prepare it to operate in output compare mode

Return values

None

Definition at line 275 of file stm32f30x_hrtim.c.

void HRTIM_SimpleOCChannelConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	OCChannel,
		HRTIM_BasicOCChannelCfgTypeDef *	pBasicOCChannelCfg
	)

Configures an output in basic output compare mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
OCChannel	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2
pBasicOCChannelCfg	pointer to the basic output compare output configuration structure

Note: When the timer operates in basic output compare mode: Output 1 is implicitely controled by the compare unit 1 Output 2 is implicitely controled by the compare unit 2 Output Set/Reset crossbar is set according to the selected output compare mode: Toggle: SETxyR = RSTxyR = CMPy Active: SETxyR = CMPy, RSTxyR = 0 Inactive: SETxy =0, RSTxy = CMPy

Return values

None

Definition at line 1460 of file stm32f30x_hrtim.c.

void HRTIM_SimpleOCStart	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	OCChannel
	)

Starts the output compare signal generation on the designed timer output.

Parameters

HRTIMx	pointer to HRTIM peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
OCChannel	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

None

Definition at line 507 of file stm32f30x_hrtim.c.

void HRTIM_SimpleOCStop	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	OCChannel
	)

Stops the output compare signal generation on the designed timer output.

Parameters

HRTIMx	pointer to HRTIM peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
OCChannel	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

None

Definition at line 542 of file stm32f30x_hrtim.c.

void HRTIM_SimpleOnePulse_Init	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		HRTIM_BaseInitTypeDef *	HRTIM_BaseInitStruct
	)

Initializes the HRTIMx timer in basic one pulse mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x1 to 0x5 for timers A to E

Note: Initializes the time-base unit of the timer and prepare it to operate in one pulse mode. In this mode the counter operates in single shot mode (retriggerable or not)

Return values

None

Definition at line 334 of file stm32f30x_hrtim.c.

void HRTIM_SimpleOnePulseChannelConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	OnePulseChannel,
		HRTIM_BasicOnePulseChannelCfgTypeDef *	pBasicOnePulseChannelCfg
	)

Configures an output basic one pulse mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
OnePulseChannel	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2
pBasicOnePulseChannelCfg	pointer to the basic one pulse output configuration structure

Note: When the timer operates in basic one pulse mode: the timer counter is implicitly started by the reset event, the reset of the timer counter is triggered by the designated external event GPIO input is implicitly used as event source, Output 1 is implicitly controled by the compare unit 1, Output 2 is implicitly controled by the compare unit 2. Output Set/Reset crossbar is set as follows: Output 1: SETx1R = CMP1, RSTx1R = PER Output 2: SETx2R = CMP2, RST2R = PER The counter mode should be HRTIM_MODE_SINGLESHOT_RETRIGGERABLE

Return values

None

Definition at line 1742 of file stm32f30x_hrtim.c.

void HRTIM_SimpleOnePulseStart	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	OnePulseChannel
	)

Enables the basic one pulse signal generation on the designed output.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
OnePulseChannel	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

None

Definition at line 721 of file stm32f30x_hrtim.c.

void HRTIM_SimpleOnePulseStop	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	OnePulseChannel
	)

Disables the basic one pulse signal generation on the designed output.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
OnePulseChannel	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

None

Definition at line 755 of file stm32f30x_hrtim.c.

void HRTIM_SimplePWM_Init	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		HRTIM_BaseInitTypeDef *	HRTIM_BaseInitStruct
	)

Initializes the HRTIMx timer in basic PWM mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x1 to 0x5 for timers A to E

Note: Initializes the time-base unit of the timer and prepare it to operate in capture mode

Return values

None

Definition at line 295 of file stm32f30x_hrtim.c.

void HRTIM_SimplePWMChannelConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	PWMChannel,
		HRTIM_BasicPWMChannelCfgTypeDef *	pBasicPWMChannelCfg
	)

Configures an output in basic PWM mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
PWMChannel	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2
pBasicPWMChannelCfg	pointer to the basic PWM output configuration structure

Note: When the timer operates in basic PWM output mode: Output 1 is implicitly controled by the compare unit 1 Output 2 is implicitly controled by the compare unit 2 Output Set/Reset crossbar is set as follows: Output 1: SETx1R = CMP1, RSTx1R = PER Output 2: SETx2R = CMP2, RST2R = PER

Return values

None

Definition at line 1592 of file stm32f30x_hrtim.c.

void HRTIM_SimplePWMStart	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	PWMChannel
	)

Starts the PWM output signal generation on the designed timer output.

Parameters

HRTIMx	pointer to HRTIM peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
PWMChannel	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

None

Definition at line 576 of file stm32f30x_hrtim.c.

void HRTIM_SimplePWMStop	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	PWMChannel
	)

Stops the PWM output signal generation on the designed timer output.

Parameters

HRTIMx	pointer to HRTIM peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
PWMChannel	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

None

Definition at line 610 of file stm32f30x_hrtim.c.

void HRTIM_SlaveSetCompare	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	CompareUnit,
		uint32_t	Compare
	)

Sets the HRTIMx Slave Comparex Register value.

Parameters

HRTIMx	pointer to HRTIMx peripheral
CompareUnit	Compare unit to configure This parameter can be one of the following values: HRTIM_COMPAREUNIT_1: Compare unit 1 HRTIM_COMPAREUNIT_2: Compare unit 2 HRTIM_COMPAREUNIT_3: Compare unit 3 HRTIM_COMPAREUNIT_4: Compare unit 4
Compare	specifies the Comparex register new value

Return values

None

Definition at line 2076 of file stm32f30x_hrtim.c.

void HRTIM_SoftwareCapture	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	CaptureUnit
	)

Triggers a software capture on the designed capture unit.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
CaptureUnit	Capture unit to trig This parameter can be one of the following values: HRTIM_CAPTUREUNIT_1: Capture unit 1 HRTIM_CAPTUREUNIT_2: Capture unit 2

Return values

None

Note: The 'software capture' bit in the capure configuration register is automatically reset by hardware

Definition at line 2912 of file stm32f30x_hrtim.c.

void HRTIM_SoftwareReset	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimersToReset
	)

Triggers the reset of one or several timers.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimersToUpdate	timers concerned with the software counter reset This parameter can be any combination of the following values: HRTIM_TIMER_MASTER HRTIM_TIMER_A HRTIM_TIMER_B HRTIM_TIMER_C HRTIM_TIMER_D HRTIM_TIMER_E

Return values

None

Note: The 'software reset' bits in the HRTIMx control register 2 are automatically reset by hardware

Definition at line 2979 of file stm32f30x_hrtim.c.

void HRTIM_SoftwareUpdate	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimersToUpdate
	)

Triggers the update of the registers of one or several timers.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimersToUpdate	timers concerned with the software register update This parameter can be any combination of the following values: HRTIM_TIMERUPDATE_MASTER HRTIM_TIMERUPDATE_A HRTIM_TIMERUPDATE_B HRTIM_TIMERUPDATE_C HRTIM_TIMERUPDATE_D HRTIM_TIMERUPDATE_E

Return values

None

Note: The 'software update' bits in the HRTIMx control register 2 register are automatically reset by hardware

Definition at line 2953 of file stm32f30x_hrtim.c.

void HRTIM_SynchronizationConfig	(	HRTIM_TypeDef *	HRTIMx,
		HRTIM_SynchroCfgTypeDef *	pSynchroCfg
	)

Configures the external input/output synchronization of the HRTIMx.

Parameters

HRTIMx	pointer to HRTIMx peripheral
pSynchroCfg	pointer to the input/output synchronization configuration structure

Return values

None

Definition at line 2479 of file stm32f30x_hrtim.c.

void HRTIM_TimerEventFilteringConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Event,
		HRTIM_TimerEventFilteringCfgTypeDef *	pTimerEventFilteringCfg
	)

Configures the event filtering capabilities of a timer (blanking, windowing)

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
Event	external event for which timer event filtering must be configured This parameter can be one of the following values: HRTIM_EVENT_1: External event 1 HRTIM_EVENT_2: External event 2 HRTIM_EVENT_3: External event 3 HRTIM_EVENT_4: External event 4 HRTIM_EVENT_5: External event 5 HRTIM_EVENT_6: External event 6 HRTIM_EVENT_7: External event 7 HRTIM_EVENT_8: External event 8 HRTIM_EVENT_9: External event 9 HRTIM_EVENT_10: External event 10
pTimerEventFilteringCfg	pointer to the timer event filtering configuration structure

Return values

None

Definition at line 2211 of file stm32f30x_hrtim.c.

void HRTIM_Waveform_Init	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		HRTIM_BaseInitTypeDef *	HRTIM_BaseInitStruct,
		HRTIM_TimerInitTypeDef *	HRTIM_TimerInitStruct
	)

Initializes a timer operating in waveform mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 for master timer 0x1 to 0x5 for timers A to E
pTimerInit	pointer to the timer initialization data structure

Return values

None

Definition at line 354 of file stm32f30x_hrtim.c.

void HRTIM_WaveformCaptureConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	CaptureUnit,
		HRTIM_CaptureCfgTypeDef *	pCaptureCfg
	)

Configures the capture unit of a timer operating in waveform mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
CaptureChannel	Capture unit to configure This parameter can be one of the following values: HRTIM_CAPTUREUNIT_1: Capture unit 1 HRTIM_CAPTUREUNIT_2: Capture unit 2
pCaptureCfg	pointer to the compare unit configuration structure

Return values

None

Definition at line 2128 of file stm32f30x_hrtim.c.

void HRTIM_WaveformCompareConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	CompareUnit,
		HRTIM_CompareCfgTypeDef *	pCompareCfg
	)

Configures the compare unit of a timer operating in waveform mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index 0xFF for master timer This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
CompareUnit	Compare unit to configure This parameter can be one of the following values: HRTIM_COMPAREUNIT_1: Compare unit 1 HRTIM_COMPAREUNIT_2: Compare unit 2 HRTIM_COMPAREUNIT_3: Compare unit 3 HRTIM_COMPAREUNIT_4: Compare unit 4
pCompareCfg	pointer to the compare unit configuration structure

Note: When auto delayed mode is required for compare unit 2 or compare unit 4, application has to configure separately the capture unit. Capture unit to configure in that case depends on the compare unit auto delayed mode is applied to (see below): Auto delayed on output compare 2: capture unit 1 must be configured Auto delayed on output compare 4: capture unit 2 must be configured

Return values

None

Definition at line 1932 of file stm32f30x_hrtim.c.

void HRTIM_WaveformCounterStart	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimersToStart
	)

Starts the counter of the designated timer(s) operating in waveform mode Timers can be combined (ORed) to allow for simultaneous counter start.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimersToStart	Timer counter(s) to start This parameter can be any combination of the following values: HRTIM_TIMERID_MASTER HRTIM_TIMERID_TIMER_A HRTIM_TIMERID_TIMER_B HRTIM_TIMERID_TIMER_C HRTIM_TIMERID_TIMER_D HRTIM_TIMERID_TIMER_E

Return values

None

Definition at line 783 of file stm32f30x_hrtim.c.

void HRTIM_WaveformCounterStop	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimersToStop
	)

Stops the counter of the designated timer(s) operating in waveform mode Timers can be combined (ORed) to allow for simultaneous counter stop.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimersToStop	Timer counter(s) to stop This parameter can be any combination of the following values: HRTIM_TIMERID_MASTER HRTIM_TIMERID_TIMER_A HRTIM_TIMERID_TIMER_B HRTIM_TIMERID_TIMER_C HRTIM_TIMERID_TIMER_D HRTIM_TIMERID_TIMER_E

Return values

None

Definition at line 804 of file stm32f30x_hrtim.c.

uint32_t HRTIM_WaveformGetOutputLevel	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Output
	)

Returns actual level (active or inactive) of the designated output.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
Output	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

Output level

Note: Returned output level is taken before the output stage (chopper, polarity).

Definition at line 3153 of file stm32f30x_hrtim.c.

uint32_t HRTIM_WaveformGetOutputState	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Output
	)

Returns actual state (RUN, IDLE, FAULT) of the designated output.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
Output	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

Output state

Definition at line 3228 of file stm32f30x_hrtim.c.

void HRTIM_WaveformOuputConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Output,
		HRTIM_OutputCfgTypeDef *	pOutputCfg
	)

void HRTIM_WaveformOutputConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Output,
		HRTIM_OutputCfgTypeDef *	pOutputCfg
	)

Configures the output of a timer operating in waveform mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
Output	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2
pOutputCfg	pointer to the timer output configuration structure

Return values

None

Definition at line 2172 of file stm32f30x_hrtim.c.

void HRTIM_WaveformOutputStart	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	OutputsToStart
	)

Enables the generation of the waveform signal on the designated output(s) Outputs can be combined (ORed) to allow for simultaneous output enabling.

Parameters

HRTIMx pointer to HRTIMx peripheral

OutputsToStart

Timer output(s) to enable This parameter can be any combination of the following values:

HRTIM_OUTPUT_TA1: Timer A - Output 1
HRTIM_OUTPUT_TA2: Timer A - Output 2
HRTIM_OUTPUT_TB1: Timer B - Output 1
HRTIM_OUTPUT_TB2: Timer B - Output 2
HRTIM_OUTPUT_TC1: Timer C - Output 1
HRTIM_OUTPUT_TC2: Timer C - Output 2
HRTIM_OUTPUT_TD1: Timer D - Output 1
HRTIM_OUTPUT_TD2: Timer D - Output 2
HRTIM_OUTPUT_TE1: Timer E - Output 1
HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

None

Definition at line 829 of file stm32f30x_hrtim.c.

void HRTIM_WaveformOutputStop	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	OutputsToStop
	)

Disables the generation of the waveform signal on the designated output(s) Outputs can be combined (ORed) to allow for simultaneous output disabling.

Parameters

HRTIMx pointer to HRTIMx peripheral

OutputsToStop

Timer output(s) to disable This parameter can be any combination of the following values:

HRTIM_OUTPUT_TA1: Timer A - Output 1
HRTIM_OUTPUT_TA2: Timer A - Output 2
HRTIM_OUTPUT_TB1: Timer B - Output 1
HRTIM_OUTPUT_TB2: Timer B - Output 2
HRTIM_OUTPUT_TC1: Timer C - Output 1
HRTIM_OUTPUT_TC2: Timer C - Output 2
HRTIM_OUTPUT_TD1: Timer D - Output 1
HRTIM_OUTPUT_TD2: Timer D - Output 2
HRTIM_OUTPUT_TE1: Timer E - Output 1
HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

None

Definition at line 854 of file stm32f30x_hrtim.c.

void HRTIM_WaveformSetOutputLevel	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Output,
		uint32_t	OutputLevel
	)

Forces the timer output to its active or inactive state.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
Output	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2
OutputLevel	indicates whether the output is forced to its active or inactive state This parameter can be one of the following values: HRTIM_OUTPUTLEVEL_ACTIVE: output is forced to its active state HRTIM_OUTPUTLEVEL_INACTIVE: output is forced to its inactive state

Return values

None

Note: The 'software set/reset trigger' bit in the output set/reset registers is automatically reset by hardware

Definition at line 3016 of file stm32f30x_hrtim.c.

void HRTIM_WaveformTimerConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		HRTIM_TimerCfgTypeDef *	pTimerCfg
	)

Configures the general behavior of a timer operating in waveform mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
pTimerCfg	pointer to the timer configuration structure

Note: When the timer operates in waveform mode, all the features supported by the HRTIMx are available without any limitation.

Return values

None

Definition at line 1846 of file stm32f30x_hrtim.c.

Modules

Classes

Macros

Functions

Detailed Description

Macro Definition Documentation

Function Documentation