Provides low level IO with the Dynamixel servos through pyserial. Has the ability to write instruction packets, request and read register value packets, send and receive a response to a ping packet, and send a SYNC WRITE multi-servo instruction packet.
Definition at line 55 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.__init__ | ( | self, | |
| port, | |||
| baudrate, | |||
readback_echo = False |
|||
| ) |
Constructor takes serial port and baudrate as arguments.
Definition at line 62 of file dynamixel_io.py.
Destructor calls DynamixelIO.close
Definition at line 75 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.__read_response | ( | self, | |
| servo_id | |||
| ) | [private] |
Definition at line 95 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.__write_serial | ( | self, | |
| data | |||
| ) | [private] |
Definition at line 88 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.close | ( | self | ) |
Be nice, close the serial port.
Definition at line 79 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.exception_on_error | ( | self, | |
| error_code, | |||
| servo_id, | |||
| command_failed | |||
| ) |
Definition at line 951 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.get_angle_limits | ( | self, | |
| servo_id | |||
| ) |
Returns the min and max angle limits from the specified servo.
Definition at line 828 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.get_current | ( | self, | |
| servo_id | |||
| ) |
Reads the servo's current consumption (if supported by model)
Definition at line 889 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.get_drive_mode | ( | self, | |
| servo_id | |||
| ) |
Reads the servo's drive mode.
Definition at line 843 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.get_feedback | ( | self, | |
| servo_id | |||
| ) |
Returns the id, goal, position, error, speed, load, voltage, temperature and moving values from the specified servo.
Definition at line 913 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.get_firmware_version | ( | self, | |
| servo_id | |||
| ) |
Reads the servo's firmware version.
Definition at line 814 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.get_model_number | ( | self, | |
| servo_id | |||
| ) |
Servo status access functions #.
Reads the servo's model number (e.g. 12 for AX-12+).
Definition at line 807 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.get_position | ( | self, | |
| servo_id | |||
| ) |
Reads the servo's position value from its registers.
Definition at line 864 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.get_return_delay_time | ( | self, | |
| servo_id | |||
| ) |
Reads the servo's return delay time.
Definition at line 821 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.get_speed | ( | self, | |
| servo_id | |||
| ) |
Reads the servo's speed value from its registers.
Definition at line 872 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.get_voltage | ( | self, | |
| servo_id | |||
| ) |
Reads the servo's voltage.
Definition at line 882 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.get_voltage_limits | ( | self, | |
| servo_id | |||
| ) |
Returns the min and max voltage limits from the specified servo.
Definition at line 850 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.ping | ( | self, | |
| servo_id | |||
| ) |
Ping the servo with "servo_id". This causes the servo to return a "status packet". This can tell us if the servo is attached and powered, and if so, if there are any errors.
Definition at line 218 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.read | ( | self, | |
| servo_id, | |||
| address, | |||
| size | |||
| ) |
Read "size" bytes of data from servo with "servo_id" starting at the
register with "address". "address" is an integer between 0 and 57. It is
recommended to use the constants in module dynamixel_const for readability.
To read the position from servo with id 1, the method should be called
like:
read(1, DXL_GOAL_POSITION_L, 2)
Definition at line 112 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_acceleration | ( | self, | |
| servo_id, | |||
| acceleration | |||
| ) |
Sets the acceleration. The unit is 8.583 Degree / sec^2. 0 - acceleration control disabled, 1-254 - valid range for acceleration.
Definition at line 510 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_angle_limit_ccw | ( | self, | |
| servo_id, | |||
| angle_ccw | |||
| ) |
Set the max (CCW) angle of rotation limit.
Definition at line 304 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_angle_limit_cw | ( | self, | |
| servo_id, | |||
| angle_cw | |||
| ) |
Set the min (CW) angle of rotation limit.
Definition at line 292 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_angle_limits | ( | self, | |
| servo_id, | |||
| min_angle, | |||
| max_angle | |||
| ) |
Set the min (CW) and max (CCW) angle of rotation limits.
Definition at line 316 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_baud_rate | ( | self, | |
| servo_id, | |||
| baud_rate | |||
| ) |
Sets servo communication speed. The range from 0 to 254.
Definition at line 272 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_compliance_margin_ccw | ( | self, | |
| servo_id, | |||
| margin | |||
| ) |
The error between goal position and present position in CCW direction. The range of the value is 0 to 255, and the unit is the same as Goal Position. The greater the value, the more difference occurs.
Definition at line 414 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_compliance_margin_cw | ( | self, | |
| servo_id, | |||
| margin | |||
| ) |
The error between goal position and present position in CW direction. The range of the value is 0 to 255, and the unit is the same as Goal Position. The greater the value, the more difference occurs.
Definition at line 403 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_compliance_margins | ( | self, | |
| servo_id, | |||
| margin_cw, | |||
| margin_ccw | |||
| ) |
The error between goal position and present position in CCW direction. The range of the value is 0 to 255, and the unit is the same as Goal Position. The greater the value, the more difference occurs.
Definition at line 425 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_compliance_slope_ccw | ( | self, | |
| servo_id, | |||
| slope | |||
| ) |
Sets the level of Torque near the goal position in CCW direction. Compliance Slope is set in 7 steps, the higher the value, the more flexibility is obtained.
Definition at line 446 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_compliance_slope_cw | ( | self, | |
| servo_id, | |||
| slope | |||
| ) |
Sets the level of Torque near the goal position in CW direction. Compliance Slope is set in 7 steps, the higher the value, the more flexibility is obtained.
Definition at line 436 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_compliance_slopes | ( | self, | |
| servo_id, | |||
| slope_cw, | |||
| slope_ccw | |||
| ) |
Sets the level of Torque near the goal position in CW/CCW direction. Compliance Slope is set in 7 steps, the higher the value, the more flexibility is obtained.
Definition at line 456 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_d_gain | ( | self, | |
| servo_id, | |||
| d_gain | |||
| ) |
Sets the value of derivative action of PID controller. Gain value is in range 0 to 254.
Definition at line 466 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_drive_mode | ( | self, | |
| servo_id, | |||
is_slave = False, |
|||
is_reverse = False |
|||
| ) |
Sets the drive mode for EX-106 motors
Definition at line 331 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_goal_torque | ( | self, | |
| servo_id, | |||
| torque | |||
| ) |
Set the servo to torque control mode (similar to wheel mode, but controlling the torque) Valid values are from -1023 to 1023. Anything outside this range or 'None' disables torque control.
Definition at line 575 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_i_gain | ( | self, | |
| servo_id, | |||
| i_gain | |||
| ) |
Sets the value of integral action of PID controller. Gain value is in range 0 to 254.
Definition at line 476 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_id | ( | self, | |
| old_id, | |||
| new_id | |||
| ) |
These function modify EEPROM data which persists after power cycle #.
Sets a new unique number to identify a motor. The range from 1 to 253 (0xFD) can be used.
Definition at line 262 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_compliance_margin_ccw | ( | self, | |
| valueTuples | |||
| ) |
Set different CCW compliance margin for multiple servos. Should be called as such: set_multi_compliance_margin_ccw( ( (id1, margin1), (id2, margin2), (id3, margin3) ) )
Definition at line 649 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_compliance_margin_cw | ( | self, | |
| valueTuples | |||
| ) |
Set different CW compliance margin for multiple servos. Should be called as such: set_multi_compliance_margin_cw( ( (id1, margin1), (id2, margin2), (id3, margin3) ) )
Definition at line 641 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_compliance_margins | ( | self, | |
| valueTuples | |||
| ) |
Set different CW and CCW compliance margins for multiple servos. Should be called as such: set_multi_compliance_margins( ( (id1, cw_margin1, ccw_margin1), (id2, cw_margin2, ccw_margin2) ) )
Definition at line 657 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_compliance_slope_ccw | ( | self, | |
| valueTuples | |||
| ) |
Set different CCW compliance slope for multiple servos. Should be called as such: set_multi_compliance_slope_ccw( ( (id1, slope1), (id2, slope2), (id3, slope3) ) )
Definition at line 673 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_compliance_slope_cw | ( | self, | |
| valueTuples | |||
| ) |
Set different CW compliance slope for multiple servos. Should be called as such: set_multi_compliance_slope_cw( ( (id1, slope1), (id2, slope2), (id3, slope3) ) )
Definition at line 665 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_compliance_slopes | ( | self, | |
| valueTuples | |||
| ) |
Set different CW and CCW compliance slopes for multiple servos. Should be called as such: set_multi_compliance_slopes( ( (id1, cw_slope1, ccw_slope1), (id2, cw_slope2, ccw_slope2) ) )
Definition at line 681 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_position | ( | self, | |
| valueTuples | |||
| ) |
Set different positions for multiple servos. Should be called as such: set_multi_position( ( (id1, position1), (id2, position2), (id3, position3) ) )
Definition at line 708 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_position_and_speed | ( | self, | |
| valueTuples | |||
| ) |
Set different positions and speeds for multiple servos. Should be called as such: set_multi_position_and_speed( ( (id1, position1, speed1), (id2, position2, speed2), (id3, position3, speed3) ) )
Definition at line 772 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_punch | ( | self, | |
| valueTuples | |||
| ) |
Set different punch values for multiple servos. NOTE: according to documentation, currently this value is not being used. Should be called as such: set_multi_punch( ( (id1, punch1), (id2, punch2), (id3, punch3) ) )
Definition at line 689 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_speed | ( | self, | |
| valueTuples | |||
| ) |
Set different speeds for multiple servos. Should be called as such: set_multi_speed( ( (id1, speed1), (id2, speed2), (id3, speed3) ) )
Definition at line 728 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_torque_enabled | ( | self, | |
| valueTuples | |||
| ) |
These functions can send multiple commands to multiple servos # These commands are used in ROS wrapper as they don't send a # response packet, ROS wrapper gets motor states at a set rate #.
Method to set multiple servos torque enabled. Should be called as such: set_multi_servos_to_torque_enabled( (id1, True), (id2, True), (id3, True) )
Definition at line 632 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_multi_torque_limit | ( | self, | |
| valueTuples | |||
| ) |
Set different torque limits for multiple servos. Should be called as such: set_multi_torque_limit( ( (id1, torque1), (id2, torque2), (id3, torque3) ) )
Definition at line 754 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_p_gain | ( | self, | |
| servo_id, | |||
| p_gain | |||
| ) |
Sets the value of proportional action of PID controller. Gain value is in range 0 to 254.
Definition at line 486 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_position | ( | self, | |
| servo_id, | |||
| position | |||
| ) |
Set the servo with servo_id to the specified goal position. Position value must be positive.
Definition at line 528 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_position_and_speed | ( | self, | |
| servo_id, | |||
| position, | |||
| speed | |||
| ) |
Set the servo with servo_id to specified position and speed. Speed can be negative only if the dynamixel is in "freespin" mode.
Definition at line 603 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_punch | ( | self, | |
| servo_id, | |||
| punch | |||
| ) |
Sets the limit value of torque being reduced when the output torque is decreased in the Compliance Slope area. In other words, it is the mimimum torque. The initial value is 32 (0x20) and can be extended up to 1023 (0x3FF). (Refer to Compliance margin & Slope)
Definition at line 496 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_return_delay_time | ( | self, | |
| servo_id, | |||
| delay | |||
| ) |
Sets the delay time from the transmission of Instruction Packet until the return of Status Packet. 0 to 254 (0xFE) can be used, and the delay time per data value is 2 usec.
Definition at line 281 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_speed | ( | self, | |
| servo_id, | |||
| speed | |||
| ) |
Set the servo with servo_id to the specified goal speed. Speed can be negative only if the dynamixel is in "freespin" mode.
Definition at line 541 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_torque_enabled | ( | self, | |
| servo_id, | |||
| enabled | |||
| ) |
These functions can send a single command to a single servo #.
Sets the value of the torque enabled register to 1 or 0. When the torque is disabled the servo can be moved manually while the motor is still powered.
Definition at line 392 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_torque_limit | ( | self, | |
| servo_id, | |||
| torque | |||
| ) |
Sets the value of the maximum torque limit for servo with id servo_id. Valid values are 0 to 1023 (0x3FF), and the unit is about 0.1%. For example, if the value is 512 only 50% of the maximum torque will be used. If the power is turned on, the value of Max Torque (Address 14, 15) is used as the initial value.
Definition at line 560 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_voltage_limit_max | ( | self, | |
| servo_id, | |||
| max_voltage | |||
| ) |
Set the maximum voltage limit. NOTE: the absolute min is 25v
Definition at line 356 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_voltage_limit_min | ( | self, | |
| servo_id, | |||
| min_voltage | |||
| ) |
Set the minimum voltage limit. NOTE: the absolute min is 5v
Definition at line 342 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.set_voltage_limits | ( | self, | |
| servo_id, | |||
| min_voltage, | |||
| max_voltage | |||
| ) |
Set the min and max voltage limits. NOTE: the absolute min is 5v and the absolute max is 25v
Definition at line 370 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.sync_write | ( | self, | |
| address, | |||
| data | |||
| ) |
Use Broadcast message to send multiple servos instructions at the
same time. No "status packet" will be returned from any servos.
"address" is an integer between 0 and 49. It is recommended to use the
constants in module dynamixel_const for readability. "data" is a tuple of
tuples. Each tuple in "data" must contain the servo id followed by the
data that should be written from the starting address. The amount of
data can be as long as needed.
To set servo with id 1 to position 276 and servo with id 2 to position
550, the method should be called like:
sync_write(DXL_GOAL_POSITION_L, ( (1, 20, 1), (2 ,38, 2) ))
Definition at line 185 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.test_bit | ( | self, | |
| number, | |||
| offset | |||
| ) |
Definition at line 253 of file dynamixel_io.py.
| def dynamixel_driver.dynamixel_io.DynamixelIO.write | ( | self, | |
| servo_id, | |||
| address, | |||
| data | |||
| ) |
Write the values from the "data" list to the servo with "servo_id"
starting with data[0] at "address", continuing through data[n-1] at
"address" + (n-1), where n = len(data). "address" is an integer between
0 and 49. It is recommended to use the constants in module dynamixel_const
for readability. "data" is a list/tuple of integers.
To set servo with id 1 to position 276, the method should be called
like:
write(1, DXL_GOAL_POSITION_L, (20, 1))
Definition at line 146 of file dynamixel_io.py.
Definition at line 62 of file dynamixel_io.py.
Definition at line 62 of file dynamixel_io.py.
Definition at line 62 of file dynamixel_io.py.
Definition at line 62 of file dynamixel_io.py.