Definition at line 88 of file pyHand_api.py.
| def pyHand_api.pyHand.__init__ | ( | self, | |
port = '/dev/pcan32' |
|||
| ) |
Creates a PCANBasic object
@param port: CAN port used to communicate with the hand
@type connection: string
Definition at line 90 of file pyHand_api.py.
| def pyHand_api.pyHand.can_init | ( | self | ) |
Initializes the CAN connection. Note that this does not initialize the hand itself.
Definition at line 161 of file pyHand_api.py.
| def pyHand_api.pyHand.can_reset | ( | self | ) |
Resets the CAN connection. Note that this may cause a loss of data, but may also clear unwanted data. Utilize as needed.
Definition at line 140 of file pyHand_api.py.
| def pyHand_api.pyHand.can_status | ( | self | ) |
Returns the status of the CAN connection as specified in PCANBasic's GetStatus method.
Definition at line 153 of file pyHand_api.py.
| def pyHand_api.pyHand.can_uninit | ( | self | ) |
Uninitializes the CAN connection. Rarely used.
Definition at line 170 of file pyHand_api.py.
| def pyHand_api.pyHand.check_error | ( | self, | |
| connection, | |||
| result, | |||
| location_of_error | |||
| ) |
Checks error on the CAN Bus.
@param connection: The connection on which the CAN is talking. For example, PCANBasic()
@type connection: PCANBasic
@param result: The number corresponding to the error returned.
@type resulr: int
@param location_of_error: A description of where the error occurred.
@type location_of_error: str
Definition at line 108 of file pyHand_api.py.
| def pyHand_api.pyHand.clean_read_buffer | ( | self | ) |
Definition at line 1594 of file pyHand_api.py.
| def pyHand_api.pyHand.close_all | ( | self | ) |
Closes every finger at once. Mainly for use in DEMO. WARNING: can be dangerous because it may cause fingers to collide if the hand is in an unknown position.
Definition at line 883 of file pyHand_api.py.
| def pyHand_api.pyHand.close_finger | ( | self, | |
| puckID, | |||
autowait = True |
|||
| ) |
Close finger and wait for completion. @param puckID: Finger to be closed. @type puckID: int @param autowait: calls wait_done_moving if True. Defaults to True. @type autowait: bool
Definition at line 830 of file pyHand_api.py.
| def pyHand_api.pyHand.close_finger_step | ( | self, | |
| puckID, | |||
step = -1, |
|||
autowait = True |
|||
| ) |
Close finger by input decrement.
@param puckID: Finger to be closed.
@type puckID: int
@param step: size of decrement in encoder counts. Defaults to -1.
@type step: int
@param autowait: calls wait_done_moving if True. Defaults to True.
@type autowait: bool
Definition at line 963 of file pyHand_api.py.
| def pyHand_api.pyHand.close_grasp | ( | self | ) |
Closes all fingers to the position encoded by Close Target (CT).
Definition at line 776 of file pyHand_api.py.
| def pyHand_api.pyHand.close_grasp_step | ( | self, | |
step = 0 |
|||
| ) |
Close grasp by input decrement.
@param step: size of decrement in encoder counts. Defaults to 0.
@type step: int
Definition at line 911 of file pyHand_api.py.
| def pyHand_api.pyHand.close_spread | ( | self | ) |
Close spread to position determined by Close Target (CT).
Definition at line 806 of file pyHand_api.py.
| def pyHand_api.pyHand.close_spread_step | ( | self, | |
step = -1 |
|||
| ) |
Close spread by input decrement.
@param step: size of decrement in encoder counts. Defaults to -1.
@type step: int
Definition at line 934 of file pyHand_api.py.
| def pyHand_api.pyHand.deg_to_enc | ( | self, | |
| deg | |||
| ) |
Given a degree measure of an angle, return it in encoder counts.
@param deg: Degrees
@type deg: float
@return: Encoder counts
@rtype: int
Definition at line 1581 of file pyHand_api.py.
| def pyHand_api.pyHand.detect_breakaway | ( | self, | |
| finger | |||
| ) |
@return: True if the finger has broken away, False if it hasn't
Definition at line 745 of file pyHand_api.py.
| def pyHand_api.pyHand.done_moving | ( | self, | |
motors_to_check = ALL_FINGERS |
|||
| ) |
Checks a given list of motors once to see if they have stopped moving, and if so, it returns true
@param motors_to_check: A list of motors to check.
@type motors_to_check: Array[*int]
@rtype: bool
@return: Whether or not the motors are done moving.
Definition at line 720 of file pyHand_api.py.
| def pyHand_api.pyHand.enc_to_deg | ( | self, | |
| enc | |||
| ) |
Given an angle in encoder counts, return the degree measure of the angle that represents.
@param enc: Encoder counts.
@type enc: int
@return: Degrees
@rtype: float
Definition at line 1534 of file pyHand_api.py.
| def pyHand_api.pyHand.enc_to_per | ( | self, | |
| enc | |||
| ) |
Given an angle in encoder counts, return the percentage of the angle that represents.
@param enc: Encoder counts.
@type enc: int
@return: Percentage
@rtype: float
Definition at line 1499 of file pyHand_api.py.
| def pyHand_api.pyHand.enc_to_rad | ( | self, | |
| enc, | |||
type = BASE_TYPE |
|||
| ) |
Given an angle in encoder counts, return the radian measure of the angle that represents.
@param enc: Encoder counts.
@type enc: int
@return: Radians
@rtype: float
Definition at line 1511 of file pyHand_api.py.
| def pyHand_api.pyHand.enum | ( | self | ) |
Finds and returns all of the pucks that are attached to the bus.
@rtype: Array[]
@return: An array containing the pucks attached to the bus.
Definition at line 124 of file pyHand_api.py.
| def pyHand_api.pyHand.get_16 | ( | self, | |
| msgID, | |||
| propID | |||
| ) |
Gets a 16 bit property. Please use get_property instead of this method where applicable.
@param msgID: The puck whose property will be read from.
@type msgID: int
@param propID: The property be read from.
@type propID: int
@rtype: int
@return: The value held in the property.
Definition at line 387 of file pyHand_api.py.
| def pyHand_api.pyHand.get_32 | ( | self, | |
| msgID, | |||
| propID | |||
| ) |
Gets a 32 bit property. Please use get_property instead of this method where applicable.
@param msgID: The puck whose property will be read from.
@type msgID: int
@param propID: The property be read from.
@type propID: int
@rtype: int
@return: The value held in the property.
Definition at line 367 of file pyHand_api.py.
| def pyHand_api.pyHand.get_full_pos_packet | ( | msgID | ) |
Definition at line 982 of file pyHand_api.py.
| def pyHand_api.pyHand.get_full_tact | ( | self, | |
| msgID | |||
| ) |
Unpack all tactile sensor values in an array.
@param msgID: The puck or group to get full tactile array sensor data.
@type msgID: int
@rtype: Array[*data]
@return: An array containing the tactile data from a given puck.
self.set_property(msgID, TACT, TACT_FULL)
#self.write_msg(msgID, [TACT])
output = [0,0,0,0,0]
read_result = self.PCAN.Read(PCAN_USBBUS1)
self.check_error(self.PCAN,read_result[0],"reading full tactile data")
read_result2 = self.PCAN.Read(PCAN_USBBUS1)
self.check_error(self.PCAN,read_result2[0],"reading full tactile data")
read_result3 = self.PCAN.Read(PCAN_USBBUS1)
self.check_error(self.PCAN,read_result3[0],"reading full tactile data")
read_result4 = self.PCAN.Read(PCAN_USBBUS1)
self.check_error(self.PCAN,read_result4[0],"reading full tactile data")
read_result5 = self.PCAN.Read(PCAN_USBBUS1)
self.check_error(self.PCAN,read_result5[0],"reading full tactile data")
output[0] = read_result[1].DATA
output[1] = read_result2[1].DATA
output[2] = read_result3[1].DATA
output[3] = read_result4[1].DATA
output[4] = read_result5[1].DATA
#print 'Init: ID1 = %x, ID2 = %x, ID3 = %x, ID4 = %x, ID5 = %x'%(read_result[1].ID, read_result2[1].ID, read_result3[1].ID, read_result4[1].ID, read_result5[1].ID)
tactileVals = range(0,24)
index_ = 0
for data in output:
index_ = int(data[0]/16) * 5
#print 'index = %d, data[0] = %x'%(index_, data[0])
# Get the bits and then unpack them.
tactileVals[index_ + 0] = round(((data[0]%0x10)*0x100 + data[1])/256.0,2)
tactileVals[index_ + 1] = round((data[2]*0x10 + int(data[3]/0x10))/256.0,2)
tactileVals[index_ + 2] = round(((data[3]%0x10)*0x100 + data[4])/256.0,2)
tactileVals[index_ + 3] = round((data[5]*0x10 + int(data[6]/0x10))/256.0,2)
if index_ != 20:
tactileVals[index_ + 4] = round(((data[6]%0x10)*0x100 + data[7])/256.0,2)
#print 'Return OK : %s'%(tactileVals)
return tactileValsDefinition at line 1106 of file pyHand_api.py.
| def pyHand_api.pyHand.get_mode | ( | self, | |
| msgID | |||
| ) |
Read from MODE property, and return a tuple with the number corresponding to the mode, along with
the string name of the mode.
@param msgID: The puck from which to get the mode.
@type msgID: int
@rtype: Tuple(int, str)
@return: A tuple with the number and name of the mode.
Definition at line 511 of file pyHand_api.py.
| def pyHand_api.pyHand.get_packed_position | ( | self, | |
| msgID | |||
| ) |
Get packed position data and return both P and JP.
@param msgID: The puck or group to get position data.
@type msgID: int
@rtype: (int, int)
@return: The position and joint position of the finger in encoder counts.
Position in radians
Definition at line 1254 of file pyHand_api.py.
| def pyHand_api.pyHand.get_position | ( | self, | |
| msgID, | |||
depth = 0 |
|||
| ) |
Get packed position data and return it.
@param msgID: The puck or group to get position data.
@type msgID: int
@rtype: int
@param depth: number of times get message was retried.
@return: The position of the finger in encoder counts.
Definition at line 1220 of file pyHand_api.py.
| def pyHand_api.pyHand.get_prop_quick | ( | self, | |
| msgID, | |||
| propID, | |||
| speed | |||
| ) |
Gets a property timed at a certain rate.
@param msgID: The puck or group to have its property gotten.
@type msgID: int
@param propID: The property to be saved.
@type propID: int
@param speed: The time delay for the get.
@type speed: float
Definition at line 431 of file pyHand_api.py.
| def pyHand_api.pyHand.get_property | ( | self, | |
| msgID, | |||
| propID | |||
| ) |
Get property from pucks in msgID.
@param msgID: The puck whose property will be read from.
@type msgID: int
@param propID: The property be read from.
@type propID: int
@rtype: int
@return: The value held in the property.
Definition at line 347 of file pyHand_api.py.
| def pyHand_api.pyHand.get_role | ( | self, | |
| msgID | |||
| ) |
Read from ROLE property and return something that makes sense.
Returns an array of holding the following data:
[4-bit Product Identifier,
Internal Thermistor,
20 MHz (vs 32 MHz),
Hall Motor Encoder,
Enc Motor Encoder,
Strain Gauge,
IMU for Force-Torque Sensor,
Optical Motor Encoder]
@param msgID: The puck to get the ROLE from.
@type msgID: int
@rtype: Array[int,bool,bool,bool,bool,bool,bool,bool]
@return: An array holding the above values.
Definition at line 479 of file pyHand_api.py.
| def pyHand_api.pyHand.get_strain | ( | self, | |
| msgID | |||
| ) |
Gets the fingertip torque sensor value.
@param msgID: The puck or group to get fingertip torque sensor data.
@type msgID: int
@rtype: int
@return: Strain Gauge Reading
Definition at line 1187 of file pyHand_api.py.
| def pyHand_api.pyHand.get_tact | ( | self, | |
| msgID, | |||
topOrFull = "TOP10" |
|||
| ) |
Obtain and interpret tactile sensor data.
@param msgID: The puck or group to get full or top 10 tactile array sensor data.
@type msgID: int
@param topOrFull: To get full data, enter "FULL". To get the top 10 values, enter "TOP10". Or anything else, really.
@type topOrFull: str
@return
Definition at line 1155 of file pyHand_api.py.
| def pyHand_api.pyHand.get_temp | ( | self, | |
| msgID | |||
| ) |
Gets temperature value for all pucks in msgID.
@param msgID: The puck or group to get temp.
@type msgID: int
@rtype: int
@return: The value of the TEMP property.
Definition at line 1024 of file pyHand_api.py.
| def pyHand_api.pyHand.get_therm | ( | self, | |
| msgID | |||
| ) |
Gets motor temperature value for all pucks in msgID.
@param msgID: The puck or group to get motor temperature.
@text msgID: int
@rtype: int
@return: The value of the THERM property.
Definition at line 1047 of file pyHand_api.py.
| def pyHand_api.pyHand.get_top_tact | ( | self, | |
| msgID | |||
| ) |
Unpack the top10 values from TACT.
Returns a dictionary with 10 items like (sensor number):(tact value).
@param msgID: The puck or group to get top 10 tactile data.
@type msgID: int
@rtype: Dictionary{sensorID:value}
@return topVals: Dictionary of the top 10 tactile array sensor values.
Definition at line 1069 of file pyHand_api.py.
| def pyHand_api.pyHand.get_velocity | ( | self, | |
| msgID | |||
| ) |
Returns velocity values of finger when in motion. Mostly returns garbage. It's used to help tell when finger is stopped or near to it.
@param msgID: The puck or group to get velocity.
@type msgID: int
@rtype: float
@return: A (garbage) value representing the approximate velocity of the finger.
Definition at line 987 of file pyHand_api.py.
| def pyHand_api.pyHand.init_finger | ( | self, | |
| msgID | |||
| ) |
Sends a command to the puck to wake up the motor attatched to the puck.
@param msgID: The id of the finger to initialize.
@type msgID: int
Definition at line 225 of file pyHand_api.py.
| def pyHand_api.pyHand.init_hand | ( | self | ) |
Initialize all pucks in the hand.
@rtype: Boolean
@return: Succesfully Initialized Hand?
Definition at line 201 of file pyHand_api.py.
| def pyHand_api.pyHand.initialize | ( | self | ) |
Wakes up pucks and initializes the CAN.
This function must be implemented at the beginning of a program for this library to properly work.
@rtype: ROLE
@return: First finger's ROLE property if initialization is successful. Otherwise it returns False.
Definition at line 179 of file pyHand_api.py.
| def pyHand_api.pyHand.load_property | ( | self, | |
| msgID, | |||
| propID | |||
| ) |
Load a property's value for puck's flash memory.
@param msgID: The puck or group to have its property loaded.
@type msgID: int
@param propID: The property to be loaded.
@type propID: int
Definition at line 420 of file pyHand_api.py.
| def pyHand_api.pyHand.move | ( | self | ) |
Moves all fingers/spread to their default.
Definition at line 862 of file pyHand_api.py.
| def pyHand_api.pyHand.move_grasp | ( | self, | |
position = -1 |
|||
| ) |
Moves all fingers to input argument or default position (50).
@param position: position of fingers. Defaults to -1. Valid position range is from 0-195,000 encoder counts.
@type position: int
Definition at line 847 of file pyHand_api.py.
| def pyHand_api.pyHand.move_to | ( | self, | |
| puckID, | |||
| target, | |||
autowait = True |
|||
| ) |
Move the motor to a specific position.
@param puckID: The puck to move.
@type puckID: int
@param target: The end position to move to.
@type target: int
@param autowait: Does the program wait until the motor is done moving?
@type autowait: bool
Definition at line 705 of file pyHand_api.py.
| def pyHand_api.pyHand.new_temp_mail | ( | self, | |
| fingers_to_change | |||
| ) |
Definition at line 1486 of file pyHand_api.py.
| def pyHand_api.pyHand.onescomp | ( | self, | |
| binstr | |||
| ) |
Definition at line 1212 of file pyHand_api.py.
| def pyHand_api.pyHand.open_all | ( | self | ) |
Opens every fingers at once. Mainly used in DEMO. WARNING: can be dangerous because it may cause fingers to collide if the hand is in an unknown position.
Definition at line 869 of file pyHand_api.py.
| def pyHand_api.pyHand.open_finger | ( | self, | |
| puckID, | |||
autowait = True |
|||
| ) |
Open finger and wait for completion.
@param puckID: Finger to be opened.
@type puckID: int
@param autowait: calls wait_done_moving if True. Defaults to True.
@type autowait: bool
Definition at line 813 of file pyHand_api.py.
| def pyHand_api.pyHand.open_finger_step | ( | self, | |
| puckID, | |||
step = -1, |
|||
autowait = True |
|||
| ) |
Open finger by input increment.
@param puckID: Finger to be opened.
@type puckID: int
@param step: size of increment in encoder counts. Defaults to -1.
@type step: int
@param autowait: calls wait_done_moving if True. Defaults to True.
@type autowait: bool
Definition at line 945 of file pyHand_api.py.
| def pyHand_api.pyHand.open_grasp | ( | self | ) |
Opens all fingers to the position encoded by Open Target (OT)
Definition at line 754 of file pyHand_api.py.
| def pyHand_api.pyHand.open_grasp_step | ( | self, | |
step = 0 |
|||
| ) |
Open grasp by input increment.
@param step: size of increment in encoder counts. Defaults to 0.
@type step: int
Definition at line 899 of file pyHand_api.py.
| def pyHand_api.pyHand.open_spread | ( | self | ) |
Open spread to position determined by Open Target (OT).
Definition at line 798 of file pyHand_api.py.
| def pyHand_api.pyHand.open_spread_step | ( | self, | |
step = -1 |
|||
| ) |
Open spread by input increment.
@param step: size of increment in encoder counts. Defaults to -1.
@type step: int
Definition at line 923 of file pyHand_api.py.
| def pyHand_api.pyHand.per_to_enc | ( | self, | |
| per | |||
| ) |
Given a percentage of an angle, return it in encoder counts.
@param per: Percentage
@type per: float
@return: Encoder counts
@rtype: int
Definition at line 1546 of file pyHand_api.py.
| def pyHand_api.pyHand.process_can_messages | ( | self | ) |
Reads and process all the msgs in the bus
Depending on the CAN id, it'll use different methods
Definition at line 1283 of file pyHand_api.py.
| def pyHand_api.pyHand.process_full_tact | ( | self, | |
| msg | |||
| ) |
Process and saves all the messages containing the tactile information
Definition at line 1410 of file pyHand_api.py.
| def pyHand_api.pyHand.process_motor_temp | ( | self, | |
| msg | |||
| ) |
Process the msg and extract the temperature of the motor puck on the CAN ID
Definition at line 1370 of file pyHand_api.py.
| def pyHand_api.pyHand.process_motor_therm | ( | self, | |
| msg | |||
| ) |
Process the msg and extract the temperature of the motor on the CAN ID
Definition at line 1390 of file pyHand_api.py.
| def pyHand_api.pyHand.process_packed_position | ( | self, | |
| msg | |||
| ) |
Process the CAN msgs and saves the position depending on the MSG ID
Definition at line 1316 of file pyHand_api.py.
| def pyHand_api.pyHand.process_strain | ( | self, | |
| msg | |||
| ) |
Process the msg and extract the strain value depending on the CAN ID
Definition at line 1356 of file pyHand_api.py.
| def pyHand_api.pyHand.process_tactile_data | ( | self, | |
| data_array | |||
| ) |
Process the array of data and returns a tactile array
Definition at line 1466 of file pyHand_api.py.
| def pyHand_api.pyHand.rad_to_enc | ( | self, | |
| rad, | |||
type = BASE_TYPE |
|||
| ) |
Given the readian measure of an angle, return it in encoder counts.
@param rad: Radians
@type rad: float
@return: Encoder counts
@rtype: int
Definition at line 1558 of file pyHand_api.py.
| def pyHand_api.pyHand.read_full_tact | ( | self, | |
| msgID | |||
| ) |
Read all tactile sensors
Definition at line 1100 of file pyHand_api.py.
| def pyHand_api.pyHand.read_msg | ( | self | ) |
Read a general message from PCAN_USBBUS1
Typically, msg[1] (where msg is the thing returned), contains the pertinent information.
@rtype: (TPCANStatus, TPCANMsg, TPCANTimestamp)
@return: A tuple containing the status, message, and timestamp.
Definition at line 236 of file pyHand_api.py.
| def pyHand_api.pyHand.read_msg_resilient | ( | self, | |
| expect_puck, | |||
| expect_prop, | |||
max_recurse = 10, |
|||
counter = 0 |
|||
| ) |
Reads message given the puckID and the propertyID.
It will read as normal, until it gets some expected output from the puck.
@param expect_puck: The puck to read from.
@type expect_puck: int
@param expect_prop: The property read from.
@type expect_prop: int
@param max_recurse: The most number of times to repeat the get.
@type max_recurse: int
@param counter: Used internally. Do not set.
@type counter: int
@rtype: int
@return: The value held in the property of the given puck.
Definition at line 449 of file pyHand_api.py.
| def pyHand_api.pyHand.read_packed_position | ( | self, | |
| msgID | |||
| ) |
Get packed position data and return both P and JP.
@param msgID: The puck or group to get position data.
@type msgID: int
@rtype: (int, int)
@return: sends a msg to read the position.
Definition at line 1269 of file pyHand_api.py.
| def pyHand_api.pyHand.read_strain | ( | self, | |
| msgID | |||
| ) |
Sends the message to get the fingertip torque sensor value.
@param msgID: The puck or group to get fingertip torque sensor data.
@type msgID: int
@rtype: int
@return: CAN status
Definition at line 1199 of file pyHand_api.py.
| def pyHand_api.pyHand.read_temp | ( | self, | |
| msgID | |||
| ) |
Sends a message to get the temperature value for all pucks in msgID.
@param msgID: The puck or group to get temp.
@type msgID: int
@rtype: int
@return: The value of the TEMP property.
Definition at line 1036 of file pyHand_api.py.
| def pyHand_api.pyHand.read_therm | ( | self, | |
| msgID | |||
| ) |
Gets motor temperature value for all pucks in msgID.
@param msgID: The puck or group to get motor temperature.
@text msgID: int
@rtype: int
@return: The value of the THERM property.
Definition at line 1058 of file pyHand_api.py.
| def pyHand_api.pyHand.revert_temp_mail | ( | self, | |
| fingers_to_change, | |||
| former | |||
| ) |
Definition at line 1493 of file pyHand_api.py.
| def pyHand_api.pyHand.save_property | ( | self, | |
| msgID, | |||
| propID | |||
| ) |
Save a property.
@param msgID: The puck or group to have its property saved.
@type msgID: int
@param propID: The property to be saved.
@type propID: int
Definition at line 408 of file pyHand_api.py.
| def pyHand_api.pyHand.send_msg | ( | self, | |
| msgID, | |||
| data | |||
| ) |
Send a general message to PCAN_USBBUS1. This can be a get, set, or even garbage.
It does not apply any sleep
@param msgID: The puck or group to which the message will be sent.
@type msgID: int
@param data: The array containing the data for the TPCANMsg.
@type data: Array[]
@return the return status after writing in the bus
Definition at line 273 of file pyHand_api.py.
| def pyHand_api.pyHand.set_16 | ( | self, | |
| msgID, | |||
| propID, | |||
| value | |||
| ) |
Set property to a given value for a 16 bit property.
Avoid usage of this method. Use self.set_property instead.
@param msgID: The puck or group whose property will be set.
@type msgID: int
@param propID: The number corresponding to the property to be set.
@type propID: int
@param value: The value to which the property will be set.
@type value: int
Definition at line 329 of file pyHand_api.py.
| def pyHand_api.pyHand.set_32 | ( | self, | |
| msgID, | |||
| propID, | |||
| value | |||
| ) |
Set property to a given value for a 32 bit property.
Avoid usage of this method. Use self.set_property instead.
@param msgID: The puck or group whose property will be set.
@type msgID: int
@param propID: The number corresponding to the property to be set.
@type propID: int
@param value: The value to which the property will be set.
@type value: int
Definition at line 313 of file pyHand_api.py.
| def pyHand_api.pyHand.set_hand_targets | ( | self, | |
| f1_target, | |||
| f2_target, | |||
| f3_target, | |||
| sp_target | |||
| ) |
Given fingers and spread target values, move the hand to that position.
Will mainly be used to load user-defined hand positions.
Takes Barrett Units as inputs.
@param f1_target: The position (in encoder ticks) for finger 1 to move to.
@type f1_target: int
@param f2_target: The position for finger 2 to move to.
@type f2_target: int
@param f3_target: The position for finger 3 to move to.
@type f3_target: int
@param sp_target: The position for spread to move to.
@type sp_target: int
Definition at line 679 of file pyHand_api.py.
| def pyHand_api.pyHand.set_mode | ( | self, | |
| msgID, | |||
| value | |||
| ) |
Set the mode property using either strings or numbers.
@param msgID: The puck or group to set the mode.
@type msgID: int
@param value: The value to which the mode should be set.
@type value: int
Definition at line 536 of file pyHand_api.py.
| def pyHand_api.pyHand.set_property | ( | self, | |
| msgID, | |||
| propID, | |||
| value | |||
| ) |
Set property to a given value.
@param msgID: The puck or group whose property will be set.
@type msgID: int
@param propID: The number corresponding to the property to be set.
@type propID: int
@param value: The value to which the property will be set.
@type value: int
Definition at line 296 of file pyHand_api.py.
| def pyHand_api.pyHand.set_puck_like | ( | self, | |
| puckID, | |||
| virtID | |||
| ) |
Set the puck to have all the default properties of the indicated puck ID.
@param puckID: The original puck to change.
@type puckID: int
@param virtID: The ID of the puck to load defaults from.
@type virtID: int
Definition at line 552 of file pyHand_api.py.
| def pyHand_api.pyHand.set_velocity | ( | self, | |
| puckID, | |||
| velocity | |||
| ) |
Set the velocity and make the motor move.
@param puckID: The ID of the puck to set the velocity of.
@type puckID: int
@param velocity: The velocity (in cts/ms) of the motor.
@type velocity: int
Definition at line 1170 of file pyHand_api.py.
| def pyHand_api.pyHand.twoscomp | ( | self, | |
| number | |||
| ) |
Definition at line 1215 of file pyHand_api.py.
| def pyHand_api.pyHand.wait_done_moving | ( | self, | |
motors_to_check = ALL_FINGERS |
|||
| ) |
Waits until the given list of motors have all stopped moving.
@param motors_to_check: A list of motors to wait for.
@type motors_to_check: Array[*int]
Definition at line 735 of file pyHand_api.py.
| def pyHand_api.pyHand.write_msg | ( | self, | |
| msgID, | |||
| data, | |||
delay = .002 |
|||
| ) |
Send a general message to PCAN_USBBUS1. This can be a get, set, or even garbage.
@param msgID: The puck or group to which the message will be sent.
@type msgID: int
@param data: The array containing the data for the TPCANMsg.
@type data: Array[]
@param delay: The time delay to wait for the message to be written.
@type delay: float
@rtype: TPCANStatus
@return: Status of the self.PCAN bus.
Definition at line 248 of file pyHand_api.py.
Definition at line 95 of file pyHand_api.py.
Definition at line 95 of file pyHand_api.py.
Definition at line 95 of file pyHand_api.py.
Definition at line 95 of file pyHand_api.py.
Definition at line 95 of file pyHand_api.py.