mtdef::MID Class Reference

List of all members.

Static Public Attributes
int	Configuration = 0x0D
	Configuration, 118 bytes.
int	DataLength = 0x0b
	Data Length, 2 bytes.
int	DeviceID = 0x01
	DeviceID, 4 bytes: HH HL LH LL.
int	Error = 0x42
	Error message, 1 data byte.
dictionary	ErrorCodes
int	FirmwareRev = 0x13
	Firmware revision, 3 bytes: major minor rev.
int	GoToConfig = 0x30
	Switch to config state.
int	GoToMeasurement = 0x10
	Switch to measurement state.
int	GPSStatus = 0xA7
	GPS status.
int	MTData = 0x32
	Data packet.
int	ProductCode = 0x1d
	Product code (max 20 bytes data).
int	ReqAvailableScenarios = 0x62
	Request the available XKF scenarios on the device.
int	ReqBaudrate = 0x18
	Request baudrate.
int	ReqConfiguration = 0x0C
	Request configuration.
int	ReqCurrentScenario = 0x64
	Request the ID of the currently used scenario.
int	ReqDataLength = 0x0a
	Request data length according to current configuration.
int	ReqDID = 0x00
	Request device id.
int	ReqFWRev = 0x12
	Request firmware revision.
int	ReqGPSStatus = 0xA6
	Request GPS status.
int	ReqProductCode = 0x1C
	Request product code in plain text.
int	Reset = 0x40
	Reset device.
int	RestoreFactoryDef = 0x0E
	Restore factory defaults.
int	SetBaudrate = 0x18
	Set next baudrate.
int	SetCurrentScenario = 0x64
	Set the scenario to use, 2 bytes.
int	SetOutputMode = 0xD0
	Set output mode, 2 bytes.
int	SetOutputSettings = 0xD2
	Set output settings, 4 bytes.
int	SetOutputSkipFactor = 0xD4
	Set skip factor.
int	SetPeriod = 0x04
	Set sampling period, 2 bytes.

Detailed Description

Values for the message id (MID)

Definition at line 4 of file mtdef.py.

Member Data Documentation

int mtdef::MID::Configuration = 0x0D [static]

Configuration, 118 bytes.

Definition at line 58 of file mtdef.py.

int mtdef::MID::DataLength = 0x0b [static]

Data Length, 2 bytes.

Definition at line 40 of file mtdef.py.

int mtdef::MID::DeviceID = 0x01 [static]

DeviceID, 4 bytes: HH HL LH LL.

Definition at line 28 of file mtdef.py.

int mtdef::MID::Error = 0x42 [static]

Error message, 1 data byte.

Definition at line 7 of file mtdef.py.

dictionary mtdef::MID::ErrorCodes [static]

Initial value:

{
                0x03: "Invalid period",
                0x04: "Invalid message",
                0x1E: "Timer overflow",
                0x20: "Invalid baudrate",
                0x21: "Invalid parameter"
        }

Definition at line 8 of file mtdef.py.

int mtdef::MID::FirmwareRev = 0x13 [static]

Firmware revision, 3 bytes: major minor rev.

Definition at line 36 of file mtdef.py.

int mtdef::MID::GoToConfig = 0x30 [static]

Switch to config state.

Definition at line 20 of file mtdef.py.

int mtdef::MID::GoToMeasurement = 0x10 [static]

Switch to measurement state.

Definition at line 18 of file mtdef.py.

int mtdef::MID::GPSStatus = 0xA7 [static]

GPS status.