Collaboration diagram for Global interrupt management:

Modules
	Deprecated interrupt definitions

Functions
void	cpu_irq_enter_critical (void)

void	cpu_irq_leave_critical (void)

Variables
static volatile uint32_t	cpu_irq_critical_section_counter

static volatile bool	cpu_irq_prev_interrupt_state

volatile bool	g_interrupt_enabled

Interrupt Service Routine definition
#define	ISR(func) void func (void)
	Define service routine. More...

#define	irq_initialize_vectors()
	Initialize interrupt vectors. More...

#define	irq_register_handler(int_num, int_prio)
	Register handler for interrupt. More...

Global interrupt flags
typedef uint32_t	irqflags_t
	Type used for holding state of interrupt flag. More...

static irqflags_t	cpu_irq_save (void)
	Get and clear the global interrupt flags. More...

static bool	cpu_irq_is_enabled_flags (irqflags_t flags)
	Check if interrupts are globally enabled in supplied flags. More...

static void	cpu_irq_restore (irqflags_t flags)
	Restore global interrupt flags. More...

#define	cpu_irq_enable()
	Enable interrupts globally. More...

#define	cpu_irq_disable()
	Disable interrupts globally. More...

#define	cpu_irq_is_enabled() (__get_PRIMASK() == 0)
	Check if interrupts are globally enabled. More...

Interrupt Service Routine definition
#define	Enable_global_interrupt() cpu_irq_enable()

#define	Disable_global_interrupt() cpu_irq_disable()

#define	Is_global_interrupt_enabled() cpu_irq_is_enabled()

Usual Constants
#define	DISABLE 0

#define	ENABLE 1

#define	DISABLED 0

#define	ENABLED 1

#define	OFF 0

#define	ON 1

#define	FALSE 0

#define	TRUE 1

#define	false FALSE

#define	true TRUE

#define	KO 0

#define	OK 1

#define	PASS 0

#define	FAIL 1

#define	LOW 0

#define	HIGH 1

#define	CLR 0

#define	SET 1

Detailed Description

This is a driver for global enabling and disabling of interrupts.

Macro Definition Documentation

◆ CLR

#define CLR 0

Definition at line 421 of file libchip_compiler.h.

◆ cpu_irq_disable

#define cpu_irq_disable ( )

Value:

do {                                       \
                __disable_irq();                       \
                __DMB();                               \
                g_interrupt_enabled = false;           \
        } while (0)

Disable interrupts globally.

◆ cpu_irq_enable

#define cpu_irq_enable ( )

Value:

do {                                       \
                g_interrupt_enabled = true;            \
                __DMB();                               \
                __enable_irq();                        \
        } while (0)

Enable interrupts globally.

◆ cpu_irq_is_enabled

#define cpu_irq_is_enabled ( ) (__get_PRIMASK() == 0)

Check if interrupts are globally enabled.

Returns: True if interrupts are enabled.

◆ DISABLE

#define DISABLE 0

Definition at line 401 of file libchip_compiler.h.

◆ Disable_global_interrupt

#define Disable_global_interrupt ( ) cpu_irq_disable()

Definition at line 392 of file libchip_compiler.h.

◆ DISABLED

#define DISABLED 0

Definition at line 403 of file libchip_compiler.h.

◆ ENABLE

#define ENABLE 1

Definition at line 402 of file libchip_compiler.h.

◆ Enable_global_interrupt

#define Enable_global_interrupt ( ) cpu_irq_enable()

Definition at line 391 of file libchip_compiler.h.

◆ ENABLED

#define ENABLED 1

Definition at line 404 of file libchip_compiler.h.

◆ FAIL

#define FAIL 1

Definition at line 418 of file libchip_compiler.h.

◆ FALSE

#define FALSE 0

Definition at line 407 of file libchip_compiler.h.

◆ false

#define false FALSE

Definition at line 411 of file libchip_compiler.h.

◆ HIGH

#define HIGH 1

Definition at line 420 of file libchip_compiler.h.

◆ irq_initialize_vectors

#define irq_initialize_vectors ( )

Value:

do { \

} while(0)

Initialize interrupt vectors.

For NVIC the interrupt vectors are put in vector table. So nothing to do to initialize them, except defined the vector function with right name.

This must be called prior to irq_register_handler.

Definition at line 89 of file interrupt_sam_nvic.h.

◆ irq_register_handler

#define irq_register_handler	(	int_num,
		int_prio
	)

Value:

NVIC_ClearPendingIRQ(    (IRQn_Type)int_num);                      \
        NVIC_SetPriority(    (IRQn_Type)int_num, int_prio);                \
        NVIC_EnableIRQ(      (IRQn_Type)int_num);                          \

Register handler for interrupt.

For NVIC the interrupt vectors are put in vector table. So nothing to do to register them, except defined the vector function with right name.

Usage:

irq_initialize_vectors();

irq_register_handler(foo_irq_handler);

Note: The function func must be defined with the ISR macro.; The functions prototypes can be found in the device exception header files (exceptions.h).

Definition at line 110 of file interrupt_sam_nvic.h.

◆ Is_global_interrupt_enabled

#define Is_global_interrupt_enabled ( ) cpu_irq_is_enabled()

Definition at line 393 of file libchip_compiler.h.

◆ ISR

#define ISR ( func ) void func (void)

Define service routine.

Note: For NVIC devices the interrupt service routines are predefined to add to vector table in binary generation, so there is no service register at run time. The routine collections are in exceptions.h.

Usage:

ISR(foo_irq_handler)
{
     // Function definition
     ...
}

Parameters

func	Name for the function.

Definition at line 77 of file interrupt_sam_nvic.h.

◆ KO

#define KO 0

Definition at line 415 of file libchip_compiler.h.

◆ LOW

#define LOW 0

Definition at line 419 of file libchip_compiler.h.

◆ OFF

#define OFF 0

Definition at line 405 of file libchip_compiler.h.

◆ OK

#define OK 1

Definition at line 416 of file libchip_compiler.h.

◆ ON

#define ON 1

Definition at line 406 of file libchip_compiler.h.

◆ PASS

#define PASS 0

Definition at line 417 of file libchip_compiler.h.

◆ SET

#define SET 1

Definition at line 422 of file libchip_compiler.h.

◆ TRUE

#define TRUE 1

Definition at line 408 of file libchip_compiler.h.

◆ true

#define true TRUE

Definition at line 412 of file libchip_compiler.h.

Typedef Documentation

◆ irqflags_t

irqflags_t

Type used for holding state of interrupt flag.

Definition at line 130 of file interrupt_sam_nvic.h.

Function Documentation

◆ cpu_irq_enter_critical()

void cpu_irq_enter_critical ( void )

Definition at line 47 of file interrupt_sam_nvic.c.

◆ cpu_irq_is_enabled_flags()

bool cpu_irq_is_enabled_flags ( irqflags_t flags )

inlinestatic

Check if interrupts are globally enabled in supplied flags.

Parameters

flags Currents state of interrupt flags.

Returns: True if interrupts are enabled.

Definition at line 148 of file interrupt_sam_nvic.h.

◆ cpu_irq_leave_critical()

void cpu_irq_leave_critical ( void )

Definition at line 63 of file interrupt_sam_nvic.c.

◆ cpu_irq_restore()

void cpu_irq_restore ( irqflags_t flags )

inlinestatic

Restore global interrupt flags.

Use in conjunction with cpu_irq_save.

Parameters

flags State to set interrupt flag to.

Definition at line 153 of file interrupt_sam_nvic.h.

◆ cpu_irq_save()

irqflags_t cpu_irq_save ( void )

inlinestatic

Get and clear the global interrupt flags.

Use in conjunction with cpu_irq_restore.

Returns: Current state of interrupt flags.

Note: This function leaves interrupts disabled.

Definition at line 141 of file interrupt_sam_nvic.h.

Variable Documentation

◆ cpu_irq_critical_section_counter

volatile uint32_t cpu_irq_critical_section_counter

static

Definition at line 138 of file interrupt_sam_nvic.h.

◆ cpu_irq_prev_interrupt_state

volatile bool cpu_irq_prev_interrupt_state

static

Definition at line 139 of file interrupt_sam_nvic.h.

◆ g_interrupt_enabled

volatile bool g_interrupt_enabled

Definition at line 44 of file interrupt_sam_nvic.c.

Modules

Functions

Variables

Interrupt Service Routine definition

Global interrupt flags

Interrupt Service Routine definition

Usual Constants

Detailed Description

Macro Definition Documentation

◆ CLR

◆ cpu_irq_disable

◆ cpu_irq_enable

◆ cpu_irq_is_enabled

◆ DISABLE

◆ Disable_global_interrupt

◆ DISABLED

◆ ENABLE

◆ Enable_global_interrupt

◆ ENABLED

◆ FAIL

◆ FALSE

◆ false

◆ HIGH

◆ irq_initialize_vectors

◆ irq_register_handler

◆ Is_global_interrupt_enabled

◆ ISR

◆ KO

◆ LOW

◆ OFF

◆ OK

◆ ON

◆ PASS

◆ SET

◆ TRUE

◆ true

Typedef Documentation

◆ irqflags_t

Function Documentation

◆ cpu_irq_enter_critical()

◆ cpu_irq_is_enabled_flags()

◆ cpu_irq_leave_critical()

◆ cpu_irq_restore()

◆ cpu_irq_save()

Variable Documentation

◆ cpu_irq_critical_section_counter

◆ cpu_irq_prev_interrupt_state

◆ g_interrupt_enabled