Classes | |
| struct | Uart |
| Uart hardware registers. More... | |
Macros | |
| #define | UART_BRGR_CD(value) ((UART_BRGR_CD_Msk & ((value) << UART_BRGR_CD_Pos))) |
| #define | UART_BRGR_CD_Msk (0xffffu << UART_BRGR_CD_Pos) |
| (UART_BRGR) Clock Divisor More... | |
| #define | UART_BRGR_CD_Pos 0 |
| #define | UART_CMPR_CMPMODE (0x1u << 12) |
| (UART_CMPR) Comparison Mode More... | |
| #define | UART_CMPR_CMPMODE_FLAG_ONLY (0x0u << 12) |
| (UART_CMPR) Any character is received and comparison function drives CMP flag. More... | |
| #define | UART_CMPR_CMPMODE_START_CONDITION (0x1u << 12) |
| (UART_CMPR) Comparison condition must be met to start reception. More... | |
| #define | UART_CMPR_CMPPAR (0x1u << 14) |
| (UART_CMPR) Compare Parity More... | |
| #define | UART_CMPR_VAL1(value) ((UART_CMPR_VAL1_Msk & ((value) << UART_CMPR_VAL1_Pos))) |
| #define | UART_CMPR_VAL1_Msk (0xffu << UART_CMPR_VAL1_Pos) |
| (UART_CMPR) First Comparison Value for Received Character More... | |
| #define | UART_CMPR_VAL1_Pos 0 |
| #define | UART_CMPR_VAL2(value) ((UART_CMPR_VAL2_Msk & ((value) << UART_CMPR_VAL2_Pos))) |
| #define | UART_CMPR_VAL2_Msk (0xffu << UART_CMPR_VAL2_Pos) |
| (UART_CMPR) Second Comparison Value for Received Character More... | |
| #define | UART_CMPR_VAL2_Pos 16 |
| #define | UART_CR_DBGE (0x1u << 15) |
| (UART_CR) Debug Enable More... | |
| #define | UART_CR_REQCLR (0x1u << 12) |
| (UART_CR) Request Clear More... | |
| #define | UART_CR_RSTRX (0x1u << 2) |
| (UART_CR) Reset Receiver More... | |
| #define | UART_CR_RSTSTA (0x1u << 8) |
| (UART_CR) Reset Status More... | |
| #define | UART_CR_RSTTX (0x1u << 3) |
| (UART_CR) Reset Transmitter More... | |
| #define | UART_CR_RXDIS (0x1u << 5) |
| (UART_CR) Receiver Disable More... | |
| #define | UART_CR_RXEN (0x1u << 4) |
| (UART_CR) Receiver Enable More... | |
| #define | UART_CR_TXDIS (0x1u << 7) |
| (UART_CR) Transmitter Disable More... | |
| #define | UART_CR_TXEN (0x1u << 6) |
| (UART_CR) Transmitter Enable More... | |
| #define | UART_IDR_CMP (0x1u << 15) |
| (UART_IDR) Disable Comparison Interrupt More... | |
| #define | UART_IDR_FRAME (0x1u << 6) |
| (UART_IDR) Disable Framing Error Interrupt More... | |
| #define | UART_IDR_OVRE (0x1u << 5) |
| (UART_IDR) Disable Overrun Error Interrupt More... | |
| #define | UART_IDR_PARE (0x1u << 7) |
| (UART_IDR) Disable Parity Error Interrupt More... | |
| #define | UART_IDR_RXRDY (0x1u << 0) |
| (UART_IDR) Disable RXRDY Interrupt More... | |
| #define | UART_IDR_TXEMPTY (0x1u << 9) |
| (UART_IDR) Disable TXEMPTY Interrupt More... | |
| #define | UART_IDR_TXRDY (0x1u << 1) |
| (UART_IDR) Disable TXRDY Interrupt More... | |
| #define | UART_IER_CMP (0x1u << 15) |
| (UART_IER) Enable Comparison Interrupt More... | |
| #define | UART_IER_FRAME (0x1u << 6) |
| (UART_IER) Enable Framing Error Interrupt More... | |
| #define | UART_IER_OVRE (0x1u << 5) |
| (UART_IER) Enable Overrun Error Interrupt More... | |
| #define | UART_IER_PARE (0x1u << 7) |
| (UART_IER) Enable Parity Error Interrupt More... | |
| #define | UART_IER_RXRDY (0x1u << 0) |
| (UART_IER) Enable RXRDY Interrupt More... | |
| #define | UART_IER_TXEMPTY (0x1u << 9) |
| (UART_IER) Enable TXEMPTY Interrupt More... | |
| #define | UART_IER_TXRDY (0x1u << 1) |
| (UART_IER) Enable TXRDY Interrupt More... | |
| #define | UART_IMR_CMP (0x1u << 15) |
| (UART_IMR) Mask Comparison Interrupt More... | |
| #define | UART_IMR_FRAME (0x1u << 6) |
| (UART_IMR) Mask Framing Error Interrupt More... | |
| #define | UART_IMR_OVRE (0x1u << 5) |
| (UART_IMR) Mask Overrun Error Interrupt More... | |
| #define | UART_IMR_PARE (0x1u << 7) |
| (UART_IMR) Mask Parity Error Interrupt More... | |
| #define | UART_IMR_RXRDY (0x1u << 0) |
| (UART_IMR) Mask RXRDY Interrupt More... | |
| #define | UART_IMR_TXEMPTY (0x1u << 9) |
| (UART_IMR) Mask TXEMPTY Interrupt More... | |
| #define | UART_IMR_TXRDY (0x1u << 1) |
| (UART_IMR) Disable TXRDY Interrupt More... | |
| #define | UART_MR_BRSRCCK (0x1u << 12) |
| (UART_MR) Baud Rate Source Clock More... | |
| #define | UART_MR_BRSRCCK_PERIPH_CLK (0x0u << 12) |
| (UART_MR) The baud rate is driven by the peripheral clock More... | |
| #define | UART_MR_BRSRCCK_PMC_PCK (0x1u << 12) |
| (UART_MR) The baud rate is driven by a PMC programmable clock PCK (see section Power Management Controller (PMC)). More... | |
| #define | UART_MR_CHMODE(value) ((UART_MR_CHMODE_Msk & ((value) << UART_MR_CHMODE_Pos))) |
| #define | UART_MR_CHMODE_AUTOMATIC (0x1u << 14) |
| (UART_MR) Automatic echo More... | |
| #define | UART_MR_CHMODE_LOCAL_LOOPBACK (0x2u << 14) |
| (UART_MR) Local loopback More... | |
| #define | UART_MR_CHMODE_Msk (0x3u << UART_MR_CHMODE_Pos) |
| (UART_MR) Channel Mode More... | |
| #define | UART_MR_CHMODE_NORMAL (0x0u << 14) |
| (UART_MR) Normal mode More... | |
| #define | UART_MR_CHMODE_Pos 14 |
| #define | UART_MR_CHMODE_REMOTE_LOOPBACK (0x3u << 14) |
| (UART_MR) Remote loopback More... | |
| #define | UART_MR_FILTER (0x1u << 4) |
| (UART_MR) Receiver Digital Filter More... | |
| #define | UART_MR_FILTER_DISABLED (0x0u << 4) |
| (UART_MR) UART does not filter the receive line. More... | |
| #define | UART_MR_FILTER_ENABLED (0x1u << 4) |
| (UART_MR) UART filters the receive line using a three-sample filter (16x-bit clock) (2 over 3 majority). More... | |
| #define | UART_MR_PAR(value) ((UART_MR_PAR_Msk & ((value) << UART_MR_PAR_Pos))) |
| #define | UART_MR_PAR_EVEN (0x0u << 9) |
| (UART_MR) Even Parity More... | |
| #define | UART_MR_PAR_MARK (0x3u << 9) |
| (UART_MR) Mark: parity forced to 1 More... | |
| #define | UART_MR_PAR_Msk (0x7u << UART_MR_PAR_Pos) |
| (UART_MR) Parity Type More... | |
| #define | UART_MR_PAR_NO (0x4u << 9) |
| (UART_MR) No parity More... | |
| #define | UART_MR_PAR_ODD (0x1u << 9) |
| (UART_MR) Odd Parity More... | |
| #define | UART_MR_PAR_Pos 9 |
| #define | UART_MR_PAR_SPACE (0x2u << 9) |
| (UART_MR) Space: parity forced to 0 More... | |
| #define | UART_RHR_RXCHR_Msk (0xffu << UART_RHR_RXCHR_Pos) |
| (UART_RHR) Received Character More... | |
| #define | UART_RHR_RXCHR_Pos 0 |
| #define | UART_SR_CLKREQ (0x1u << 22) |
| (UART_SR) Clock Request More... | |
| #define | UART_SR_CMP (0x1u << 15) |
| (UART_SR) Comparison Match More... | |
| #define | UART_SR_FRAME (0x1u << 6) |
| (UART_SR) Framing Error More... | |
| #define | UART_SR_OVRE (0x1u << 5) |
| (UART_SR) Overrun Error More... | |
| #define | UART_SR_PARE (0x1u << 7) |
| (UART_SR) Parity Error More... | |
| #define | UART_SR_RXRDY (0x1u << 0) |
| (UART_SR) Receiver Ready More... | |
| #define | UART_SR_SWES (0x1u << 21) |
| (UART_SR) SleepWalking Enable Status More... | |
| #define | UART_SR_TXEMPTY (0x1u << 9) |
| (UART_SR) Transmitter Empty More... | |
| #define | UART_SR_TXRDY (0x1u << 1) |
| (UART_SR) Transmitter Ready More... | |
| #define | UART_SR_WKUPREQ (0x1u << 23) |
| (UART_SR) Wake-Up Request More... | |
| #define | UART_THR_TXCHR(value) ((UART_THR_TXCHR_Msk & ((value) << UART_THR_TXCHR_Pos))) |
| #define | UART_THR_TXCHR_Msk (0xffu << UART_THR_TXCHR_Pos) |
| (UART_THR) Character to be Transmitted More... | |
| #define | UART_THR_TXCHR_Pos 0 |
| #define | UART_VERSION_MFN_Msk (0x7u << UART_VERSION_MFN_Pos) |
| (UART_VERSION) Metal Fix Number More... | |
| #define | UART_VERSION_MFN_Pos 16 |
| #define | UART_VERSION_VERSION_Msk (0xfffu << UART_VERSION_VERSION_Pos) |
| (UART_VERSION) Hardware Module Version More... | |
| #define | UART_VERSION_VERSION_Pos 0 |
| #define | UART_WPMR_WPEN (0x1u << 0) |
| (UART_WPMR) Write Protection Enable More... | |
| #define | UART_WPMR_WPKEY(value) ((UART_WPMR_WPKEY_Msk & ((value) << UART_WPMR_WPKEY_Pos))) |
| #define | UART_WPMR_WPKEY_Msk (0xffffffu << UART_WPMR_WPKEY_Pos) |
| (UART_WPMR) Write Protection Key More... | |
| #define | UART_WPMR_WPKEY_PASSWD (0x554152u << 8) |
| (UART_WPMR) Writing any other value in this field aborts the write operation.Always reads as 0. More... | |
| #define | UART_WPMR_WPKEY_Pos 8 |
SOFTWARE API DEFINITION FOR Universal Asynchronous Receiver Transmitter
| #define UART_BRGR_CD | ( | value | ) | ((UART_BRGR_CD_Msk & ((value) << UART_BRGR_CD_Pos))) |
Definition at line 140 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_BRGR_CD_Msk (0xffffu << UART_BRGR_CD_Pos) |
(UART_BRGR) Clock Divisor
Definition at line 139 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_BRGR_CD_Pos 0 |
Definition at line 138 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CMPR_CMPMODE (0x1u << 12) |
(UART_CMPR) Comparison Mode
Definition at line 145 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CMPR_CMPMODE_FLAG_ONLY (0x0u << 12) |
(UART_CMPR) Any character is received and comparison function drives CMP flag.
Definition at line 146 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CMPR_CMPMODE_START_CONDITION (0x1u << 12) |
(UART_CMPR) Comparison condition must be met to start reception.
Definition at line 147 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CMPR_CMPPAR (0x1u << 14) |
(UART_CMPR) Compare Parity
Definition at line 148 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CMPR_VAL1 | ( | value | ) | ((UART_CMPR_VAL1_Msk & ((value) << UART_CMPR_VAL1_Pos))) |
Definition at line 144 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CMPR_VAL1_Msk (0xffu << UART_CMPR_VAL1_Pos) |
(UART_CMPR) First Comparison Value for Received Character
Definition at line 143 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CMPR_VAL1_Pos 0 |
Definition at line 142 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CMPR_VAL2 | ( | value | ) | ((UART_CMPR_VAL2_Msk & ((value) << UART_CMPR_VAL2_Pos))) |
Definition at line 151 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CMPR_VAL2_Msk (0xffu << UART_CMPR_VAL2_Pos) |
(UART_CMPR) Second Comparison Value for Received Character
Definition at line 150 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CMPR_VAL2_Pos 16 |
Definition at line 149 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CR_DBGE (0x1u << 15) |
(UART_CR) Debug Enable
Definition at line 72 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CR_REQCLR (0x1u << 12) |
(UART_CR) Request Clear
Definition at line 71 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CR_RSTRX (0x1u << 2) |
(UART_CR) Reset Receiver
Definition at line 64 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CR_RSTSTA (0x1u << 8) |
(UART_CR) Reset Status
Definition at line 70 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CR_RSTTX (0x1u << 3) |
(UART_CR) Reset Transmitter
Definition at line 65 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CR_RXDIS (0x1u << 5) |
(UART_CR) Receiver Disable
Definition at line 67 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CR_RXEN (0x1u << 4) |
(UART_CR) Receiver Enable
Definition at line 66 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CR_TXDIS (0x1u << 7) |
(UART_CR) Transmitter Disable
Definition at line 69 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_CR_TXEN (0x1u << 6) |
(UART_CR) Transmitter Enable
Definition at line 68 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IDR_CMP (0x1u << 15) |
(UART_IDR) Disable Comparison Interrupt
Definition at line 110 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IDR_FRAME (0x1u << 6) |
(UART_IDR) Disable Framing Error Interrupt
Definition at line 107 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IDR_OVRE (0x1u << 5) |
(UART_IDR) Disable Overrun Error Interrupt
Definition at line 106 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IDR_PARE (0x1u << 7) |
(UART_IDR) Disable Parity Error Interrupt
Definition at line 108 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IDR_RXRDY (0x1u << 0) |
(UART_IDR) Disable RXRDY Interrupt
Definition at line 104 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IDR_TXEMPTY (0x1u << 9) |
(UART_IDR) Disable TXEMPTY Interrupt
Definition at line 109 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IDR_TXRDY (0x1u << 1) |
(UART_IDR) Disable TXRDY Interrupt
Definition at line 105 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IER_CMP (0x1u << 15) |
(UART_IER) Enable Comparison Interrupt
Definition at line 102 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IER_FRAME (0x1u << 6) |
(UART_IER) Enable Framing Error Interrupt
Definition at line 99 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IER_OVRE (0x1u << 5) |
(UART_IER) Enable Overrun Error Interrupt
Definition at line 98 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IER_PARE (0x1u << 7) |
(UART_IER) Enable Parity Error Interrupt
Definition at line 100 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IER_RXRDY (0x1u << 0) |
(UART_IER) Enable RXRDY Interrupt
Definition at line 96 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IER_TXEMPTY (0x1u << 9) |
(UART_IER) Enable TXEMPTY Interrupt
Definition at line 101 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IER_TXRDY (0x1u << 1) |
(UART_IER) Enable TXRDY Interrupt
Definition at line 97 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IMR_CMP (0x1u << 15) |
(UART_IMR) Mask Comparison Interrupt
Definition at line 118 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IMR_FRAME (0x1u << 6) |
(UART_IMR) Mask Framing Error Interrupt
Definition at line 115 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IMR_OVRE (0x1u << 5) |
(UART_IMR) Mask Overrun Error Interrupt
Definition at line 114 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IMR_PARE (0x1u << 7) |
(UART_IMR) Mask Parity Error Interrupt
Definition at line 116 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IMR_RXRDY (0x1u << 0) |
(UART_IMR) Mask RXRDY Interrupt
Definition at line 112 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IMR_TXEMPTY (0x1u << 9) |
(UART_IMR) Mask TXEMPTY Interrupt
Definition at line 117 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_IMR_TXRDY (0x1u << 1) |
(UART_IMR) Disable TXRDY Interrupt
Definition at line 113 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_BRSRCCK (0x1u << 12) |
(UART_MR) Baud Rate Source Clock
Definition at line 85 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_BRSRCCK_PERIPH_CLK (0x0u << 12) |
(UART_MR) The baud rate is driven by the peripheral clock
Definition at line 86 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_BRSRCCK_PMC_PCK (0x1u << 12) |
(UART_MR) The baud rate is driven by a PMC programmable clock PCK (see section Power Management Controller (PMC)).
Definition at line 87 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_CHMODE | ( | value | ) | ((UART_MR_CHMODE_Msk & ((value) << UART_MR_CHMODE_Pos))) |
Definition at line 90 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_CHMODE_AUTOMATIC (0x1u << 14) |
(UART_MR) Automatic echo
Definition at line 92 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_CHMODE_LOCAL_LOOPBACK (0x2u << 14) |
(UART_MR) Local loopback
Definition at line 93 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_CHMODE_Msk (0x3u << UART_MR_CHMODE_Pos) |
(UART_MR) Channel Mode
Definition at line 89 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_CHMODE_NORMAL (0x0u << 14) |
(UART_MR) Normal mode
Definition at line 91 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_CHMODE_Pos 14 |
Definition at line 88 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_CHMODE_REMOTE_LOOPBACK (0x3u << 14) |
(UART_MR) Remote loopback
Definition at line 94 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_FILTER (0x1u << 4) |
(UART_MR) Receiver Digital Filter
Definition at line 74 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_FILTER_DISABLED (0x0u << 4) |
(UART_MR) UART does not filter the receive line.
Definition at line 75 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_FILTER_ENABLED (0x1u << 4) |
(UART_MR) UART filters the receive line using a three-sample filter (16x-bit clock) (2 over 3 majority).
Definition at line 76 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_PAR | ( | value | ) | ((UART_MR_PAR_Msk & ((value) << UART_MR_PAR_Pos))) |
Definition at line 79 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_PAR_EVEN (0x0u << 9) |
(UART_MR) Even Parity
Definition at line 80 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_PAR_MARK (0x3u << 9) |
(UART_MR) Mark: parity forced to 1
Definition at line 83 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_PAR_Msk (0x7u << UART_MR_PAR_Pos) |
(UART_MR) Parity Type
Definition at line 78 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_PAR_NO (0x4u << 9) |
(UART_MR) No parity
Definition at line 84 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_PAR_ODD (0x1u << 9) |
(UART_MR) Odd Parity
Definition at line 81 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_PAR_Pos 9 |
Definition at line 77 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_MR_PAR_SPACE (0x2u << 9) |
(UART_MR) Space: parity forced to 0
Definition at line 82 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_RHR_RXCHR_Msk (0xffu << UART_RHR_RXCHR_Pos) |
(UART_RHR) Received Character
Definition at line 132 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_RHR_RXCHR_Pos 0 |
Definition at line 131 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_SR_CLKREQ (0x1u << 22) |
(UART_SR) Clock Request
Definition at line 128 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_SR_CMP (0x1u << 15) |
(UART_SR) Comparison Match
Definition at line 126 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_SR_FRAME (0x1u << 6) |
(UART_SR) Framing Error
Definition at line 123 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_SR_OVRE (0x1u << 5) |
(UART_SR) Overrun Error
Definition at line 122 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_SR_PARE (0x1u << 7) |
(UART_SR) Parity Error
Definition at line 124 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_SR_RXRDY (0x1u << 0) |
(UART_SR) Receiver Ready
Definition at line 120 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_SR_SWES (0x1u << 21) |
(UART_SR) SleepWalking Enable Status
Definition at line 127 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_SR_TXEMPTY (0x1u << 9) |
(UART_SR) Transmitter Empty
Definition at line 125 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_SR_TXRDY (0x1u << 1) |
(UART_SR) Transmitter Ready
Definition at line 121 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_SR_WKUPREQ (0x1u << 23) |
(UART_SR) Wake-Up Request
Definition at line 129 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_THR_TXCHR | ( | value | ) | ((UART_THR_TXCHR_Msk & ((value) << UART_THR_TXCHR_Pos))) |
Definition at line 136 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_THR_TXCHR_Msk (0xffu << UART_THR_TXCHR_Pos) |
(UART_THR) Character to be Transmitted
Definition at line 135 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_THR_TXCHR_Pos 0 |
Definition at line 134 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_VERSION_MFN_Msk (0x7u << UART_VERSION_MFN_Pos) |
(UART_VERSION) Metal Fix Number
Definition at line 162 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_VERSION_MFN_Pos 16 |
Definition at line 161 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_VERSION_VERSION_Msk (0xfffu << UART_VERSION_VERSION_Pos) |
(UART_VERSION) Hardware Module Version
Definition at line 160 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_VERSION_VERSION_Pos 0 |
Definition at line 159 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_WPMR_WPEN (0x1u << 0) |
(UART_WPMR) Write Protection Enable
Definition at line 153 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_WPMR_WPKEY | ( | value | ) | ((UART_WPMR_WPKEY_Msk & ((value) << UART_WPMR_WPKEY_Pos))) |
Definition at line 156 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_WPMR_WPKEY_Msk (0xffffffu << UART_WPMR_WPKEY_Pos) |
(UART_WPMR) Write Protection Key
Definition at line 155 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_WPMR_WPKEY_PASSWD (0x554152u << 8) |
(UART_WPMR) Writing any other value in this field aborts the write operation.Always reads as 0.
Definition at line 157 of file utils/cmsis/same70/include/component/uart.h.
| #define UART_WPMR_WPKEY_Pos 8 |
Definition at line 154 of file utils/cmsis/same70/include/component/uart.h.