Macros | Functions
stm32f10x_adc.c File Reference

This file provides all the ADC firmware functions. More...

#include "stm32f10x_adc.h"
#include "stm32f10x_rcc.h"
Include dependency graph for stm32f10x_adc.c:

Go to the source code of this file.

Macros

#define CR1_AWDCH_Reset   ((uint32_t)0xFFFFFFE0)
 
#define CR1_AWDMode_Reset   ((uint32_t)0xFF3FFDFF)
 
#define CR1_CLEAR_Mask   ((uint32_t)0xFFF0FEFF)
 
#define CR1_DISCEN_Reset   ((uint32_t)0xFFFFF7FF)
 
#define CR1_DISCEN_Set   ((uint32_t)0x00000800)
 
#define CR1_DISCNUM_Reset   ((uint32_t)0xFFFF1FFF)
 
#define CR1_JAUTO_Reset   ((uint32_t)0xFFFFFBFF)
 
#define CR1_JAUTO_Set   ((uint32_t)0x00000400)
 
#define CR1_JDISCEN_Reset   ((uint32_t)0xFFFFEFFF)
 
#define CR1_JDISCEN_Set   ((uint32_t)0x00001000)
 
#define CR2_ADON_Reset   ((uint32_t)0xFFFFFFFE)
 
#define CR2_ADON_Set   ((uint32_t)0x00000001)
 
#define CR2_CAL_Set   ((uint32_t)0x00000004)
 
#define CR2_CLEAR_Mask   ((uint32_t)0xFFF1F7FD)
 
#define CR2_DMA_Reset   ((uint32_t)0xFFFFFEFF)
 
#define CR2_DMA_Set   ((uint32_t)0x00000100)
 
#define CR2_EXTTRIG_Reset   ((uint32_t)0xFFEFFFFF)
 
#define CR2_EXTTRIG_Set   ((uint32_t)0x00100000)
 
#define CR2_EXTTRIG_SWSTART_Reset   ((uint32_t)0xFFAFFFFF)
 
#define CR2_EXTTRIG_SWSTART_Set   ((uint32_t)0x00500000)
 
#define CR2_JEXTSEL_Reset   ((uint32_t)0xFFFF8FFF)
 
#define CR2_JEXTTRIG_JSWSTART_Reset   ((uint32_t)0xFFDF7FFF)
 
#define CR2_JEXTTRIG_JSWSTART_Set   ((uint32_t)0x00208000)
 
#define CR2_JEXTTRIG_Reset   ((uint32_t)0xFFFF7FFF)
 
#define CR2_JEXTTRIG_Set   ((uint32_t)0x00008000)
 
#define CR2_JSWSTART_Set   ((uint32_t)0x00200000)
 
#define CR2_RSTCAL_Set   ((uint32_t)0x00000008)
 
#define CR2_SWSTART_Set   ((uint32_t)0x00400000)
 
#define CR2_TSVREFE_Reset   ((uint32_t)0xFF7FFFFF)
 
#define CR2_TSVREFE_Set   ((uint32_t)0x00800000)
 
#define DR_ADDRESS   ((uint32_t)0x4001244C)
 
#define JDR_Offset   ((uint8_t)0x28)
 
#define JSQR_JL_Reset   ((uint32_t)0xFFCFFFFF)
 
#define JSQR_JL_Set   ((uint32_t)0x00300000)
 
#define JSQR_JSQ_Set   ((uint32_t)0x0000001F)
 
#define SMPR1_SMP_Set   ((uint32_t)0x00000007)
 
#define SMPR2_SMP_Set   ((uint32_t)0x00000007)
 
#define SQR1_CLEAR_Mask   ((uint32_t)0xFF0FFFFF)
 
#define SQR1_SQ_Set   ((uint32_t)0x0000001F)
 
#define SQR2_SQ_Set   ((uint32_t)0x0000001F)
 
#define SQR3_SQ_Set   ((uint32_t)0x0000001F)
 

Functions

void ADC_AnalogWatchdogCmd (ADC_TypeDef *ADCx, uint32_t ADC_AnalogWatchdog)
 Enables or disables the analog watchdog on single/all regular or injected channels. More...
 
void ADC_AnalogWatchdogSingleChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel)
 Configures the analog watchdog guarded single channel. More...
 
void ADC_AnalogWatchdogThresholdsConfig (ADC_TypeDef *ADCx, uint16_t HighThreshold, uint16_t LowThreshold)
 Configures the high and low thresholds of the analog watchdog. More...
 
void ADC_AutoInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the selected ADC automatic injected group conversion after regular one. More...
 
void ADC_ClearFlag (ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
 Clears the ADCx's pending flags. More...
 
void ADC_ClearITPendingBit (ADC_TypeDef *ADCx, uint16_t ADC_IT)
 Clears the ADCx's interrupt pending bits. More...
 
void ADC_Cmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the specified ADC peripheral. More...
 
void ADC_DeInit (ADC_TypeDef *ADCx)
 Deinitializes the ADCx peripheral registers to their default reset values. More...
 
void ADC_DiscModeChannelCountConfig (ADC_TypeDef *ADCx, uint8_t Number)
 Configures the discontinuous mode for the selected ADC regular group channel. More...
 
void ADC_DiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the discontinuous mode on regular group channel for the specified ADC. More...
 
void ADC_DMACmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the specified ADC DMA request. More...
 
void ADC_ExternalTrigConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the ADCx conversion through external trigger. More...
 
void ADC_ExternalTrigInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the ADCx injected channels conversion through external trigger. More...
 
void ADC_ExternalTrigInjectedConvConfig (ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConv)
 Configures the ADCx external trigger for injected channels conversion. More...
 
FlagStatus ADC_GetCalibrationStatus (ADC_TypeDef *ADCx)
 Gets the selected ADC calibration status. More...
 
uint16_t ADC_GetConversionValue (ADC_TypeDef *ADCx)
 Returns the last ADCx conversion result data for regular channel. More...
 
uint32_t ADC_GetDualModeConversionValue (void)
 Returns the last ADC1 and ADC2 conversion result data in dual mode. More...
 
FlagStatus ADC_GetFlagStatus (ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
 Checks whether the specified ADC flag is set or not. More...
 
uint16_t ADC_GetInjectedConversionValue (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel)
 Returns the ADC injected channel conversion result. More...
 
ITStatus ADC_GetITStatus (ADC_TypeDef *ADCx, uint16_t ADC_IT)
 Checks whether the specified ADC interrupt has occurred or not. More...
 
FlagStatus ADC_GetResetCalibrationStatus (ADC_TypeDef *ADCx)
 Gets the selected ADC reset calibration registers status. More...
 
FlagStatus ADC_GetSoftwareStartConvStatus (ADC_TypeDef *ADCx)
 Gets the selected ADC Software start conversion Status. More...
 
FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus (ADC_TypeDef *ADCx)
 Gets the selected ADC Software start injected conversion Status. More...
 
void ADC_Init (ADC_TypeDef *ADCx, ADC_InitTypeDef *ADC_InitStruct)
 Initializes the ADCx peripheral according to the specified parameters in the ADC_InitStruct. More...
 
void ADC_InjectedChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
 Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time. More...
 
void ADC_InjectedDiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the discontinuous mode for injected group channel for the specified ADC. More...
 
void ADC_InjectedSequencerLengthConfig (ADC_TypeDef *ADCx, uint8_t Length)
 Configures the sequencer length for injected channels. More...
 
void ADC_ITConfig (ADC_TypeDef *ADCx, uint16_t ADC_IT, FunctionalState NewState)
 Enables or disables the specified ADC interrupts. More...
 
void ADC_RegularChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
 Configures for the selected ADC regular channel its corresponding rank in the sequencer and its sample time. More...
 
void ADC_ResetCalibration (ADC_TypeDef *ADCx)
 Resets the selected ADC calibration registers. More...
 
void ADC_SetInjectedOffset (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset)
 Set the injected channels conversion value offset. More...
 
void ADC_SoftwareStartConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the selected ADC software start conversion . More...
 
void ADC_SoftwareStartInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the selected ADC start of the injected channels conversion. More...
 
void ADC_StartCalibration (ADC_TypeDef *ADCx)
 Starts the selected ADC calibration process. More...
 
void ADC_StructInit (ADC_InitTypeDef *ADC_InitStruct)
 Fills each ADC_InitStruct member with its default value. More...
 
void ADC_TempSensorVrefintCmd (FunctionalState NewState)
 Enables or disables the temperature sensor and Vrefint channel. More...
 

Detailed Description

This file provides all the ADC firmware functions.

Author
MCD Application Team
Version
V3.5.0
Date
11-March-2011
Attention

THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.

© COPYRIGHT 2011 STMicroelectronics

Definition in file stm32f10x_adc.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Wed Jul 3 2019 19:59:27