Modules | Functions
Collaboration diagram for ADC_Private_Functions:

Modules

 Initialization and Configuration functions
 Initialization and Configuration functions.
 
 Analog Watchdog configuration functions
 Analog Watchdog configuration functions.
 
 Temperature Sensor, Vrefint (Voltage Reference internal)
 Temperature Sensor, Vrefint and VBAT management functions.
 
 Regular Channels Configuration functions
 Regular Channels Configuration functions.
 
 Regular Channels DMA Configuration functions
 Regular Channels DMA Configuration functions.
 
 Injected channels Configuration functions
 Injected channels Configuration functions.
 
 Interrupts and flags management functions
 Interrupts and flags management functions.
 

Functions

void ADC_AnalogWatchdogCmd (ADC_TypeDef *ADCx, uint32_t ADC_AnalogWatchdog)
 Enables or disables the analog watchdog on single/all regular or injected channels. More...
 
void ADC_AnalogWatchdogSingleChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel)
 Configures the analog watchdog guarded single channel. More...
 
void ADC_AnalogWatchdogThresholdsConfig (ADC_TypeDef *ADCx, uint16_t HighThreshold, uint16_t LowThreshold)
 Configures the high and low thresholds of the analog watchdog. More...
 
void ADC_AutoInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the selected ADC automatic injected group conversion after regular one. More...
 
void ADC_ClearFlag (ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
 Clears the ADCx's pending flags. More...
 
void ADC_ClearITPendingBit (ADC_TypeDef *ADCx, uint16_t ADC_IT)
 Clears the ADCx's interrupt pending bits. More...
 
void ADC_Cmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the specified ADC peripheral. More...
 
void ADC_DeInit (ADC_TypeDef *ADCx)
 Deinitializes the ADCx peripheral registers to their default reset values. More...
 
void ADC_DiscModeChannelCountConfig (ADC_TypeDef *ADCx, uint8_t Number)
 Configures the discontinuous mode for the selected ADC regular group channel. More...
 
void ADC_DiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the discontinuous mode on regular group channel for the specified ADC. More...
 
void ADC_DMACmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the specified ADC DMA request. More...
 
void ADC_ExternalTrigConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the ADCx conversion through external trigger. More...
 
void ADC_ExternalTrigInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the ADCx injected channels conversion through external trigger. More...
 
void ADC_ExternalTrigInjectedConvConfig (ADC_TypeDef *ADCx, uint32_t ADC_ExternalTrigInjecConv)
 Configures the ADCx external trigger for injected channels conversion. More...
 
FlagStatus ADC_GetCalibrationStatus (ADC_TypeDef *ADCx)
 Gets the selected ADC calibration status. More...
 
uint16_t ADC_GetConversionValue (ADC_TypeDef *ADCx)
 Returns the last ADCx conversion result data for regular channel. More...
 
uint32_t ADC_GetDualModeConversionValue (void)
 Returns the last ADC1 and ADC2 conversion result data in dual mode. More...
 
FlagStatus ADC_GetFlagStatus (ADC_TypeDef *ADCx, uint8_t ADC_FLAG)
 Checks whether the specified ADC flag is set or not. More...
 
uint16_t ADC_GetInjectedConversionValue (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel)
 Returns the ADC injected channel conversion result. More...
 
ITStatus ADC_GetITStatus (ADC_TypeDef *ADCx, uint16_t ADC_IT)
 Checks whether the specified ADC interrupt has occurred or not. More...
 
FlagStatus ADC_GetResetCalibrationStatus (ADC_TypeDef *ADCx)
 Gets the selected ADC reset calibration registers status. More...
 
FlagStatus ADC_GetSoftwareStartConvStatus (ADC_TypeDef *ADCx)
 Gets the selected ADC Software start conversion Status. More...
 
FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus (ADC_TypeDef *ADCx)
 Gets the selected ADC Software start injected conversion Status. More...
 
void ADC_Init (ADC_TypeDef *ADCx, ADC_InitTypeDef *ADC_InitStruct)
 Initializes the ADCx peripheral according to the specified parameters in the ADC_InitStruct. More...
 
void ADC_InjectedChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
 Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time. More...
 
void ADC_InjectedDiscModeCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the discontinuous mode for injected group channel for the specified ADC. More...
 
void ADC_InjectedSequencerLengthConfig (ADC_TypeDef *ADCx, uint8_t Length)
 Configures the sequencer length for injected channels. More...
 
void ADC_ITConfig (ADC_TypeDef *ADCx, uint16_t ADC_IT, FunctionalState NewState)
 Enables or disables the specified ADC interrupts. More...
 
void ADC_RegularChannelConfig (ADC_TypeDef *ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime)
 Configures for the selected ADC regular channel its corresponding rank in the sequencer and its sample time. More...
 
void ADC_ResetCalibration (ADC_TypeDef *ADCx)
 Resets the selected ADC calibration registers. More...
 
void ADC_SetInjectedOffset (ADC_TypeDef *ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset)
 Set the injected channels conversion value offset. More...
 
void ADC_SoftwareStartConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the selected ADC software start conversion . More...
 
void ADC_SoftwareStartInjectedConvCmd (ADC_TypeDef *ADCx, FunctionalState NewState)
 Enables or disables the selected ADC start of the injected channels conversion. More...
 
void ADC_StartCalibration (ADC_TypeDef *ADCx)
 Starts the selected ADC calibration process. More...
 
void ADC_StructInit (ADC_InitTypeDef *ADC_InitStruct)
 Fills each ADC_InitStruct member with its default value. More...
 
void ADC_TempSensorVrefintCmd (FunctionalState NewState)
 Enables or disables the temperature sensor and Vrefint channel. More...
 

Detailed Description

Function Documentation

void ADC_AnalogWatchdogCmd ( ADC_TypeDef ADCx,
uint32_t  ADC_AnalogWatchdog 
)

Enables or disables the analog watchdog on single/all regular or injected channels.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_AnalogWatchdogthe ADC analog watchdog configuration. This parameter can be one of the following values:
  • ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel
  • ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel
  • ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel
  • ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel
  • ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel
  • ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels
  • ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog
Return values
None

Definition at line 1082 of file stm32f10x_adc.c.

void ADC_AnalogWatchdogSingleChannelConfig ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel 
)

Configures the analog watchdog guarded single channel.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure for the analog watchdog. This parameter can be one of the following values:
  • ADC_Channel_0: ADC Channel0 selected
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
Return values
None

Definition at line 1145 of file stm32f10x_adc.c.

void ADC_AnalogWatchdogThresholdsConfig ( ADC_TypeDef ADCx,
uint16_t  HighThreshold,
uint16_t  LowThreshold 
)

Configures the high and low thresholds of the analog watchdog.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
HighThresholdthe ADC analog watchdog High threshold value. This parameter must be a 12bit value.
LowThresholdthe ADC analog watchdog Low threshold value. This parameter must be a 12bit value.
Return values
None

Definition at line 1107 of file stm32f10x_adc.c.

void ADC_AutoInjectedConvCmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the selected ADC automatic injected group conversion after regular one.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
NewStatenew state of the selected ADC auto injected conversion This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 734 of file stm32f10x_adc.c.

void ADC_ClearFlag ( ADC_TypeDef ADCx,
uint8_t  ADC_FLAG 
)

Clears the ADCx's pending flags.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_FLAGspecifies the flag to clear. This parameter can be any combination of the following values:
  • ADC_FLAG_AWD: Analog watchdog flag
  • ADC_FLAG_EOC: End of conversion flag
  • ADC_FLAG_JEOC: End of injected group conversion flag
  • ADC_FLAG_JSTRT: Start of injected group conversion flag
  • ADC_FLAG_STRT: Start of regular group conversion flag
Return values
None

Definition at line 1228 of file stm32f10x_adc.c.

void ADC_ClearITPendingBit ( ADC_TypeDef ADCx,
uint16_t  ADC_IT 
)

Clears the ADCx's interrupt pending bits.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_ITspecifies the ADC interrupt pending bit to clear. This parameter can be any combination of the following values:
  • ADC_IT_EOC: End of conversion interrupt mask
  • ADC_IT_AWD: Analog watchdog interrupt mask
  • ADC_IT_JEOC: End of injected conversion interrupt mask
Return values
None

Definition at line 1283 of file stm32f10x_adc.c.

void ADC_Cmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the specified ADC peripheral.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
NewStatenew state of the ADCx peripheral. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 299 of file stm32f10x_adc.c.

void ADC_DeInit ( ADC_TypeDef ADCx)

Deinitializes the ADCx peripheral registers to their default reset values.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Return values
None

Definition at line 179 of file stm32f10x_adc.c.

void ADC_DiscModeChannelCountConfig ( ADC_TypeDef ADCx,
uint8_t  Number 
)

Configures the discontinuous mode for the selected ADC regular group channel.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Numberspecifies the discontinuous mode regular channel count value. This number must be between 1 and 8.
Return values
None

Definition at line 509 of file stm32f10x_adc.c.

void ADC_DiscModeCmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the discontinuous mode on regular group channel for the specified ADC.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
NewStatenew state of the selected ADC discontinuous mode on regular group channel. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 536 of file stm32f10x_adc.c.

void ADC_DMACmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the specified ADC DMA request.

Parameters
ADCxwhere x can be 1 or 3 to select the ADC peripheral. Note: ADC2 hasn't a DMA capability.
NewStatenew state of the selected ADC DMA transfer. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 324 of file stm32f10x_adc.c.

void ADC_ExternalTrigConvCmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the ADCx conversion through external trigger.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
NewStatenew state of the selected ADC external trigger start of conversion. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 686 of file stm32f10x_adc.c.

void ADC_ExternalTrigInjectedConvCmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the ADCx injected channels conversion through external trigger.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
NewStatenew state of the selected ADC external trigger start of injected conversion. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 824 of file stm32f10x_adc.c.

void ADC_ExternalTrigInjectedConvConfig ( ADC_TypeDef ADCx,
uint32_t  ADC_ExternalTrigInjecConv 
)

Configures the ADCx external trigger for injected channels conversion.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_ExternalTrigInjecConvspecifies the ADC trigger to start injected conversion. This parameter can be one of the following values:
  • ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3)
  • ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3)
  • ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2)
  • ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2)
  • ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2)
  • ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2)
  • ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8 capture compare4 event selected (for ADC1 and ADC2)
  • ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only)
  • ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only)
  • ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only)
  • ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only)
  • ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only)
  • ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not by external trigger (for ADC1, ADC2 and ADC3)
Return values
None

Definition at line 799 of file stm32f10x_adc.c.

FlagStatus ADC_GetCalibrationStatus ( ADC_TypeDef ADCx)

Gets the selected ADC calibration status.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Return values
Thenew state of ADC calibration (SET or RESET).

Definition at line 430 of file stm32f10x_adc.c.

uint16_t ADC_GetConversionValue ( ADC_TypeDef ADCx)

Returns the last ADCx conversion result data for regular channel.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Return values
TheData conversion value.

Definition at line 708 of file stm32f10x_adc.c.

uint32_t ADC_GetDualModeConversionValue ( void  )

Returns the last ADC1 and ADC2 conversion result data in dual mode.

Return values
TheData conversion value.

Definition at line 720 of file stm32f10x_adc.c.

FlagStatus ADC_GetFlagStatus ( ADC_TypeDef ADCx,
uint8_t  ADC_FLAG 
)

Checks whether the specified ADC flag is set or not.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_FLAGspecifies the flag to check. This parameter can be one of the following values:
  • ADC_FLAG_AWD: Analog watchdog flag
  • ADC_FLAG_EOC: End of conversion flag
  • ADC_FLAG_JEOC: End of injected group conversion flag
  • ADC_FLAG_JSTRT: Start of injected group conversion flag
  • ADC_FLAG_STRT: Start of regular group conversion flag
Return values
Thenew state of ADC_FLAG (SET or RESET).

Definition at line 1195 of file stm32f10x_adc.c.

uint16_t ADC_GetInjectedConversionValue ( ADC_TypeDef ADCx,
uint8_t  ADC_InjectedChannel 
)

Returns the ADC injected channel conversion result.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_InjectedChannelthe converted ADC injected channel. This parameter can be one of the following values:
  • ADC_InjectedChannel_1: Injected Channel1 selected
  • ADC_InjectedChannel_2: Injected Channel2 selected
  • ADC_InjectedChannel_3: Injected Channel3 selected
  • ADC_InjectedChannel_4: Injected Channel4 selected
Return values
TheData conversion value.

Definition at line 1052 of file stm32f10x_adc.c.

ITStatus ADC_GetITStatus ( ADC_TypeDef ADCx,
uint16_t  ADC_IT 
)

Checks whether the specified ADC interrupt has occurred or not.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_ITspecifies the ADC interrupt source to check. This parameter can be one of the following values:
  • ADC_IT_EOC: End of conversion interrupt mask
  • ADC_IT_AWD: Analog watchdog interrupt mask
  • ADC_IT_JEOC: End of injected conversion interrupt mask
Return values
Thenew state of ADC_IT (SET or RESET).

Definition at line 1247 of file stm32f10x_adc.c.

FlagStatus ADC_GetResetCalibrationStatus ( ADC_TypeDef ADCx)

Gets the selected ADC reset calibration registers status.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Return values
Thenew state of ADC reset calibration registers (SET or RESET).

Definition at line 392 of file stm32f10x_adc.c.

FlagStatus ADC_GetSoftwareStartConvStatus ( ADC_TypeDef ADCx)

Gets the selected ADC Software start conversion Status.

Gets the selected ADC Software start regular conversion Status.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Return values
Thenew state of ADC software start conversion (SET or RESET).

Definition at line 481 of file stm32f10x_adc.c.

FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus ( ADC_TypeDef ADCx)

Gets the selected ADC Software start injected conversion Status.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Return values
Thenew state of ADC software start injected conversion (SET or RESET).

Definition at line 873 of file stm32f10x_adc.c.

void ADC_Init ( ADC_TypeDef ADCx,
ADC_InitTypeDef ADC_InitStruct 
)

Initializes the ADCx peripheral according to the specified parameters in the ADC_InitStruct.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_InitStructpointer to an ADC_InitTypeDef structure that contains the configuration information for the specified ADC peripheral.
Return values
None

Definition at line 218 of file stm32f10x_adc.c.

void ADC_InjectedChannelConfig ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel,
uint8_t  Rank,
uint8_t  ADC_SampleTime 
)

Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure. This parameter can be one of the following values:
  • ADC_Channel_0: ADC Channel0 selected
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
RankThe rank in the injected group sequencer. This parameter must be between 1 and 4.
ADC_SampleTimeThe sample time value to be set for the selected channel. This parameter can be one of the following values:
  • ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles
  • ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles
  • ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles
  • ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles
  • ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles
  • ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles
  • ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles
  • ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles
Return values
None

Definition at line 930 of file stm32f10x_adc.c.

void ADC_InjectedDiscModeCmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the discontinuous mode for injected group channel for the specified ADC.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
NewStatenew state of the selected ADC discontinuous mode on injected group channel. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 760 of file stm32f10x_adc.c.

void ADC_InjectedSequencerLengthConfig ( ADC_TypeDef ADCx,
uint8_t  Length 
)

Configures the sequencer length for injected channels.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
LengthThe sequencer length. This parameter must be a number between 1 to 4.
Return values
None

Definition at line 993 of file stm32f10x_adc.c.

void ADC_ITConfig ( ADC_TypeDef ADCx,
uint16_t  ADC_IT,
FunctionalState  NewState 
)

Enables or disables the specified ADC interrupts.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_ITspecifies the ADC interrupt sources to be enabled or disabled. This parameter can be any combination of the following values:
  • ADC_IT_EOC: End of conversion interrupt mask
  • ADC_IT_AWD: Analog watchdog interrupt mask
  • ADC_IT_JEOC: End of injected conversion interrupt mask
NewStatenew state of the specified ADC interrupts. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 353 of file stm32f10x_adc.c.

void ADC_RegularChannelConfig ( ADC_TypeDef ADCx,
uint8_t  ADC_Channel,
uint8_t  Rank,
uint8_t  ADC_SampleTime 
)

Configures for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_Channelthe ADC channel to configure. This parameter can be one of the following values:
  • ADC_Channel_0: ADC Channel0 selected
  • ADC_Channel_1: ADC Channel1 selected
  • ADC_Channel_2: ADC Channel2 selected
  • ADC_Channel_3: ADC Channel3 selected
  • ADC_Channel_4: ADC Channel4 selected
  • ADC_Channel_5: ADC Channel5 selected
  • ADC_Channel_6: ADC Channel6 selected
  • ADC_Channel_7: ADC Channel7 selected
  • ADC_Channel_8: ADC Channel8 selected
  • ADC_Channel_9: ADC Channel9 selected
  • ADC_Channel_10: ADC Channel10 selected
  • ADC_Channel_11: ADC Channel11 selected
  • ADC_Channel_12: ADC Channel12 selected
  • ADC_Channel_13: ADC Channel13 selected
  • ADC_Channel_14: ADC Channel14 selected
  • ADC_Channel_15: ADC Channel15 selected
  • ADC_Channel_16: ADC Channel16 selected
  • ADC_Channel_17: ADC Channel17 selected
RankThe rank in the regular group sequencer. This parameter must be between 1 to 16.
ADC_SampleTimeThe sample time value to be set for the selected channel. This parameter can be one of the following values:
  • ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles
  • ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles
  • ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles
  • ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles
  • ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles
  • ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles
  • ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles
  • ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles
Return values
None

Definition at line 590 of file stm32f10x_adc.c.

void ADC_ResetCalibration ( ADC_TypeDef ADCx)

Resets the selected ADC calibration registers.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Return values
None

Definition at line 379 of file stm32f10x_adc.c.

void ADC_SetInjectedOffset ( ADC_TypeDef ADCx,
uint8_t  ADC_InjectedChannel,
uint16_t  Offset 
)

Set the injected channels conversion value offset.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
ADC_InjectedChannelthe ADC injected channel to set its offset. This parameter can be one of the following values:
  • ADC_InjectedChannel_1: Injected Channel1 selected
  • ADC_InjectedChannel_2: Injected Channel2 selected
  • ADC_InjectedChannel_3: Injected Channel3 selected
  • ADC_InjectedChannel_4: Injected Channel4 selected
Offsetthe offset value for the selected ADC injected channel This parameter must be a 12bit value.
Return values
None

Definition at line 1025 of file stm32f10x_adc.c.

void ADC_SoftwareStartConvCmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the selected ADC software start conversion .

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
NewStatenew state of the selected ADC software start conversion. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 457 of file stm32f10x_adc.c.

void ADC_SoftwareStartInjectedConvCmd ( ADC_TypeDef ADCx,
FunctionalState  NewState 
)

Enables or disables the selected ADC start of the injected channels conversion.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
NewStatenew state of the selected ADC software start injected conversion. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 849 of file stm32f10x_adc.c.

void ADC_StartCalibration ( ADC_TypeDef ADCx)

Starts the selected ADC calibration process.

Parameters
ADCxwhere x can be 1, 2 or 3 to select the ADC peripheral.
Return values
None

Definition at line 417 of file stm32f10x_adc.c.

void ADC_StructInit ( ADC_InitTypeDef ADC_InitStruct)

Fills each ADC_InitStruct member with its default value.

Parameters
ADC_InitStruct: pointer to an ADC_InitTypeDef structure which will be initialized.
Return values
None

Definition at line 275 of file stm32f10x_adc.c.

void ADC_TempSensorVrefintCmd ( FunctionalState  NewState)

Enables or disables the temperature sensor and Vrefint channel.

Enables or disables the temperature sensor and Vrefint channels.

Parameters
NewStatenew state of the temperature sensor. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 1167 of file stm32f10x_adc.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Wed Jul 3 2019 19:59:29