Functions

Advanced-control timers (TIM1 and TIM8) specific features. More...

Collaboration diagram for Advanced-control timers (TIM1 and TIM8) specific features:

Functions

void TIM_BDTRConfig (TIM_TypeDef *TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
 Configures the Break feature, dead time, Lock level, OSSI/OSSR State and the AOE(automatic output enable). More...
 
void TIM_BDTRStructInit (TIM_BDTRInitTypeDef *TIM_BDTRInitStruct)
 Fills each TIM_BDTRInitStruct member with its default value. More...
 
void TIM_Break1Cmd (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables the TIM Break1 input. More...
 
void TIM_Break1Config (TIM_TypeDef *TIMx, uint32_t TIM_Break1Polarity, uint8_t TIM_Break1Filter)
 Configures the Break1 feature. More...
 
void TIM_Break2Cmd (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables the TIM Break2 input. More...
 
void TIM_Break2Config (TIM_TypeDef *TIMx, uint32_t TIM_Break2Polarity, uint8_t TIM_Break2Filter)
 Configures the Break2 feature. More...
 
void TIM_CCPreloadControl (TIM_TypeDef *TIMx, FunctionalState NewState)
 Sets or Resets the TIM peripheral Capture Compare Preload Control bit. More...
 
void TIM_CtrlPWMOutputs (TIM_TypeDef *TIMx, FunctionalState NewState)
 Enables or disables the TIM peripheral Main Outputs. More...
 
void TIM_SelectCOM (TIM_TypeDef *TIMx, FunctionalState NewState)
 Selects the TIM peripheral Commutation event. More...
 

Detailed Description

Advanced-control timers (TIM1 and TIM8) specific features.

 ===============================================================================
      ##### Advanced-control timers (TIM1 and TIM8) specific features #####
 ===============================================================================  
        
             ##### TIM Driver: how to use the Break feature #####
 ===============================================================================
    [..] 
    After configuring the Timer channel(s) in the appropriate Output Compare mode: 
                         
      (#) Fill the TIM_BDTRInitStruct with the desired parameters for the Timer
          Break Polarity, dead time, Lock level, the OSSI/OSSR State and the 
          AOE(automatic output enable).
               
      (#) Call TIM_BDTRConfig(TIMx, &TIM_BDTRInitStruct) to configure the Timer
          
      (#) Enable the Main Output using TIM_CtrlPWMOutputs(TIM1, ENABLE) 
          
      (#) Once the break even occurs, the Timer's output signals are put in reset
          state or in a known state (according to the configuration made in
          TIM_BDTRConfig() function).
 ===============================================================================
     ##### Advanced-control timers (TIM1 and TIM8) specific features #####
 ===============================================================================  
       
  *** TIM Driver: how to use the Break feature ***
  ================================================ 
  [..]
  After configuring the Timer channel(s) in the appropriate Output Compare mode: 
                         
       (#) Fill the TIM_BDTRInitStruct with the desired parameters for the Timer
           Break Polarity, dead time, Lock level, the OSSI/OSSR State and the 
           AOE(automatic output enable).
               
       (#) Call TIM_BDTRConfig(TIMx, &TIM_BDTRInitStruct) to configure the Timer
          
       (#) Enable the Main Output using TIM_CtrlPWMOutputs(TIM1, ENABLE) 
          
       (#) Once the break even occurs, the Timer's output signals are put in reset
           state or in a known state (according to the configuration made in
           TIM_BDTRConfig() function).

Function Documentation

void TIM_BDTRConfig ( TIM_TypeDef TIMx,
TIM_BDTRInitTypeDef TIM_BDTRInitStruct 
)

Configures the Break feature, dead time, Lock level, OSSI/OSSR State and the AOE(automatic output enable).

Parameters
TIMxwhere x can be 1 or 8 to select the TIM
TIM_BDTRInitStructpointer to a TIM_BDTRInitTypeDef structure that contains the BDTR Register configuration information for the TIM peripheral.
Return values
None
Parameters
TIMxwhere x can be 1, 8, 15, 16 or 17 to select the TIM
TIM_BDTRInitStructpointer to a TIM_BDTRInitTypeDef structure that contains the BDTR Register configuration information for the TIM peripheral.
Return values
None

Definition at line 2221 of file stm32f4xx_tim.c.

void TIM_BDTRStructInit ( TIM_BDTRInitTypeDef TIM_BDTRInitStruct)

Fills each TIM_BDTRInitStruct member with its default value.

Parameters
TIM_BDTRInitStructpointer to a TIM_BDTRInitTypeDef structure which will be initialized.
Return values
None

Definition at line 2246 of file stm32f4xx_tim.c.

void TIM_Break1Cmd ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Enables or disables the TIM Break1 input.

Parameters
TIMxwhere x can be 1, 8, 1, 16 or 17 to select the TIMx peripheral.
NewStatenew state of the TIM Break1 input. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 2781 of file stm32f30x_tim.c.

void TIM_Break1Config ( TIM_TypeDef TIMx,
uint32_t  TIM_Break1Polarity,
uint8_t  TIM_Break1Filter 
)

Configures the Break1 feature.

Parameters
TIMxwhere x can be 1 or 8 to select the TIM
TIM_Break1Polarityspecifies the Break1 polarity. This parameter can be one of the following values:
  • TIM_Break1Polarity_Low: Break1 input is active low
  • TIM_Break1Polarity_High: Break1 input is active high
TIM_Break1Filterspecifies the Break1 filter value. This parameter must be a value between 0x00 and 0x0F
Return values
None

Definition at line 2739 of file stm32f30x_tim.c.

void TIM_Break2Cmd ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Enables or disables the TIM Break2 input.

Parameters
TIMxwhere x can be 1 or 8 to select the TIMx peripheral.
NewStatenew state of the TIM Break2 input. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 2806 of file stm32f30x_tim.c.

void TIM_Break2Config ( TIM_TypeDef TIMx,
uint32_t  TIM_Break2Polarity,
uint8_t  TIM_Break2Filter 
)

Configures the Break2 feature.

Parameters
TIMxwhere x can be 1 or 8 to select the TIM
TIM_Break2Polarityspecifies the Break2 polarity. This parameter can be one of the following values:
  • TIM_Break2Polarity_Low: Break2 input is active low
  • TIM_Break2Polarity_High: Break2 input is active high
TIM_Break2Filterspecifies the Break2 filter value. This parameter must be a value between 0x00 and 0x0F
Return values
None

Definition at line 2761 of file stm32f30x_tim.c.

void TIM_CCPreloadControl ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Sets or Resets the TIM peripheral Capture Compare Preload Control bit.

Parameters
TIMxwhere x can be 1 or 8 to select the TIMx peripheral
NewStatenew state of the Capture Compare Preload Control bit This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 2315 of file stm32f4xx_tim.c.

void TIM_CtrlPWMOutputs ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Enables or disables the TIM peripheral Main Outputs.

Parameters
TIMxwhere x can be 1 or 8 to select the TIMx peripheral.
NewStatenew state of the TIM peripheral Main Outputs. This parameter can be: ENABLE or DISABLE.
Return values
None
Parameters
TIMxwhere x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral.
NewStatenew state of the TIM peripheral Main Outputs. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 2265 of file stm32f4xx_tim.c.

void TIM_SelectCOM ( TIM_TypeDef TIMx,
FunctionalState  NewState 
)

Selects the TIM peripheral Commutation event.

Parameters
TIMxwhere x can be 1 or 8 to select the TIMx peripheral
NewStatenew state of the Commutation event. This parameter can be: ENABLE or DISABLE.
Return values
None
Parameters
TIMxwhere x can be 1, 8, 15, 16 or 17 to select the TIMx peripheral
NewStatenew state of the Commutation event. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 2290 of file stm32f4xx_tim.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Wed Jul 3 2019 19:59:29