Output Compare management functions. More...

Collaboration diagram for Output Compare management functions:

Functions
void	TIM_CCxCmd (TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx)
	Enables or disables the TIM Capture Compare Channel x. More...

void	TIM_CCxNCmd (TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN)
	Enables or disables the TIM Capture Compare Channel xN. More...

void	TIM_ClearOC1Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
	Clears or safeguards the OCREF1 signal on an external event. More...

void	TIM_ClearOC2Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
	Clears or safeguards the OCREF2 signal on an external event. More...

void	TIM_ClearOC3Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
	Clears or safeguards the OCREF3 signal on an external event. More...

void	TIM_ClearOC4Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
	Clears or safeguards the OCREF4 signal on an external event. More...

void	TIM_ClearOC5Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
	Clears or safeguards the OCREF5 signal on an external event. More...

void	TIM_ClearOC6Ref (TIM_TypeDef *TIMx, uint16_t TIM_OCClear)
	Clears or safeguards the OCREF6 signal on an external event. More...

void	TIM_ForcedOC1Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
	Forces the TIMx output 1 waveform to active or inactive level. More...

void	TIM_ForcedOC2Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
	Forces the TIMx output 2 waveform to active or inactive level. More...

void	TIM_ForcedOC3Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
	Forces the TIMx output 3 waveform to active or inactive level. More...

void	TIM_ForcedOC4Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
	Forces the TIMx output 4 waveform to active or inactive level. More...

void	TIM_ForcedOC5Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
	Forces the TIMx output 5 waveform to active or inactive level. More...

void	TIM_ForcedOC6Config (TIM_TypeDef *TIMx, uint16_t TIM_ForcedAction)
	Forces the TIMx output 6 waveform to active or inactive level. More...

void	TIM_OC1FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
	Configures the TIMx Output Compare 1 Fast feature. More...

void	TIM_OC1Init (TIM_TypeDef TIMx, TIM_OCInitTypeDef TIM_OCInitStruct)
	Initializes the TIMx Channel1 according to the specified parameters in the TIM_OCInitStruct. More...

void	TIM_OC1NPolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity)
	Configures the TIMx Channel 1N polarity. More...

void	TIM_OC1PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
	Configures the TIMx channel 1 polarity. More...

void	TIM_OC1PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
	Enables or disables the TIMx peripheral Preload register on CCR1. More...

void	TIM_OC2FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
	Configures the TIMx Output Compare 2 Fast feature. More...

void	TIM_OC2Init (TIM_TypeDef TIMx, TIM_OCInitTypeDef TIM_OCInitStruct)
	Initializes the TIMx Channel2 according to the specified parameters in the TIM_OCInitStruct. More...

void	TIM_OC2NPolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity)
	Configures the TIMx Channel 2N polarity. More...

void	TIM_OC2PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
	Configures the TIMx channel 2 polarity. More...

void	TIM_OC2PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
	Enables or disables the TIMx peripheral Preload register on CCR2. More...

void	TIM_OC3FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
	Configures the TIMx Output Compare 3 Fast feature. More...

void	TIM_OC3Init (TIM_TypeDef TIMx, TIM_OCInitTypeDef TIM_OCInitStruct)
	Initializes the TIMx Channel3 according to the specified parameters in the TIM_OCInitStruct. More...

void	TIM_OC3NPolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCNPolarity)
	Configures the TIMx Channel 3N polarity. More...

void	TIM_OC3PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
	Configures the TIMx channel 3 polarity. More...

void	TIM_OC3PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
	Enables or disables the TIMx peripheral Preload register on CCR3. More...

void	TIM_OC4FastConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCFast)
	Configures the TIMx Output Compare 4 Fast feature. More...

void	TIM_OC4Init (TIM_TypeDef TIMx, TIM_OCInitTypeDef TIM_OCInitStruct)
	Initializes the TIMx Channel4 according to the specified parameters in the TIM_OCInitStruct. More...

void	TIM_OC4PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
	Configures the TIMx channel 4 polarity. More...

void	TIM_OC4PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
	Enables or disables the TIMx peripheral Preload register on CCR4. More...

void	TIM_OC5Init (TIM_TypeDef TIMx, TIM_OCInitTypeDef TIM_OCInitStruct)
	Initializes the TIMx Channel5 according to the specified parameters in the TIM_OCInitStruct. More...

void	TIM_OC5PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
	Configures the TIMx channel 5 polarity. More...

void	TIM_OC5PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
	Enables or disables the TIMx peripheral Preload register on CCR5. More...

void	TIM_OC6Init (TIM_TypeDef TIMx, TIM_OCInitTypeDef TIM_OCInitStruct)
	Initializes the TIMx Channel6 according to the specified parameters in the TIM_OCInitStruct. More...

void	TIM_OC6PolarityConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPolarity)
	Configures the TIMx channel 6 polarity. More...

void	TIM_OC6PreloadConfig (TIM_TypeDef *TIMx, uint16_t TIM_OCPreload)
	Enables or disables the TIMx peripheral Preload register on CCR6. More...

void	TIM_OCStructInit (TIM_OCInitTypeDef *TIM_OCInitStruct)
	Fills each TIM_OCInitStruct member with its default value. More...

void	TIM_SelectGC5C1 (TIM_TypeDef *TIMx, FunctionalState NewState)
	Selects the TIM Group Channel 5 and Channel 1, OC1REFC is the logical AND of OC1REFC and OC5REF. More...

void	TIM_SelectGC5C2 (TIM_TypeDef *TIMx, FunctionalState NewState)
	Selects the TIM Group Channel 5 and Channel 2, OC2REFC is the logical AND of OC2REFC and OC5REF. More...

void	TIM_SelectGC5C3 (TIM_TypeDef *TIMx, FunctionalState NewState)
	Selects the TIM Group Channel 5 and Channel 3, OC3REFC is the logical AND of OC3REFC and OC5REF. More...

void	TIM_SelectOCREFClear (TIM_TypeDef *TIMx, uint16_t TIM_OCReferenceClear)
	Selects the OCReference Clear source. More...

void	TIM_SelectOCxM (TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode)
	Selects the TIM Output Compare Mode. More...

void	TIM_SelectOCxM (TIM_TypeDef *TIMx, uint16_t TIM_Channel, uint32_t TIM_OCMode)
	Selects the TIM Output Compare Mode. More...

void	TIM_SetCompare1 (TIM_TypeDef *TIMx, uint32_t Compare1)
	Sets the TIMx Capture Compare1 Register value. More...

void	TIM_SetCompare2 (TIM_TypeDef *TIMx, uint32_t Compare2)
	Sets the TIMx Capture Compare2 Register value. More...

void	TIM_SetCompare3 (TIM_TypeDef *TIMx, uint32_t Compare3)
	Sets the TIMx Capture Compare3 Register value. More...

void	TIM_SetCompare4 (TIM_TypeDef *TIMx, uint32_t Compare4)
	Sets the TIMx Capture Compare4 Register value. More...

void	TIM_SetCompare5 (TIM_TypeDef *TIMx, uint32_t Compare5)
	Sets the TIMx Capture Compare5 Register value. More...

void	TIM_SetCompare6 (TIM_TypeDef *TIMx, uint32_t Compare6)
	Sets the TIMx Capture Compare6 Register value. More...

Detailed Description

Output Compare management functions.

 ===============================================================================
              ##### Output Compare management functions #####
 ===============================================================================  
   
      
        ##### TIM Driver: how to use it in Output Compare Mode #####
 ===============================================================================
    [..] 
    To use the Timer in Output Compare mode, the following steps are mandatory:
       
      (#) Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) 
          function
       
      (#) Configure the TIM pins by configuring the corresponding GPIO pins
       
      (#) Configure the Time base unit as described in the first part of this driver, 
        (++) if needed, else the Timer will run with the default configuration:
            Autoreload value = 0xFFFF
        (++) Prescaler value = 0x0000
        (++) Counter mode = Up counting
        (++) Clock Division = TIM_CKD_DIV1
          
      (#) Fill the TIM_OCInitStruct with the desired parameters including:
        (++) The TIM Output Compare mode: TIM_OCMode
        (++) TIM Output State: TIM_OutputState
        (++) TIM Pulse value: TIM_Pulse
        (++) TIM Output Compare Polarity : TIM_OCPolarity
       
      (#) Call TIM_OCxInit(TIMx, &TIM_OCInitStruct) to configure the desired 
          channel with the corresponding configuration
       
      (#) Call the TIM_Cmd(ENABLE) function to enable the TIM counter.
       
      -@- All other functions can be used separately to modify, if needed,
          a specific feature of the Timer. 
          
      -@- In case of PWM mode, this function is mandatory:
          TIM_OCxPreloadConfig(TIMx, TIM_OCPreload_ENABLE); 
              
      -@- If the corresponding interrupt or DMA request are needed, the user should:
        (+@) Enable the NVIC (or the DMA) to use the TIM interrupts (or DMA requests). 
        (+@) Enable the corresponding interrupt (or DMA request) using the function 
             TIM_ITConfig(TIMx, TIM_IT_CCx) (or TIM_DMA_Cmd(TIMx, TIM_DMA_CCx))

 ===============================================================================
                ##### Output Compare management functions #####
 ===============================================================================  
       
  *** TIM Driver: how to use it in Output Compare Mode ***
  ======================================================== 
  [..] 
  To use the Timer in Output Compare mode, the following steps are mandatory:
       
       (#) Enable TIM clock using RCC_APBxPeriphClockCmd(RCC_APBxPeriph_TIMx, ENABLE) function
       
       (#) Configure the TIM pins by configuring the corresponding GPIO pins
       
       (#) Configure the Time base unit as described in the first part of this driver, 
           if needed, else the Timer will run with the default configuration:
           (++) Autoreload value = 0xFFFF
           (++) Prescaler value = 0x0000
           (++) Counter mode = Up counting
           (++) Clock Division = TIM_CKD_DIV1   
       (#) Fill the TIM_OCInitStruct with the desired parameters including:
           (++) The TIM Output Compare mode: TIM_OCMode
           (++) TIM Output State: TIM_OutputState
           (++) TIM Pulse value: TIM_Pulse
           (++) TIM Output Compare Polarity : TIM_OCPolarity
       
       (#) Call TIM_OCxInit(TIMx, &TIM_OCInitStruct) to configure the desired channel with the 
           corresponding configuration
       
       (#) Call the TIM_Cmd(ENABLE) function to enable the TIM counter.
 [..]      
       (@) All other functions can be used separately to modify, if needed,
           a specific feature of the Timer. 
          
       (@) In case of PWM mode, this function is mandatory:
           TIM_OCxPreloadConfig(TIMx, TIM_OCPreload_ENABLE); 
              
       (@) If the corresponding interrupt or DMA request are needed, the user should:
                (#@) Enable the NVIC (or the DMA) to use the TIM interrupts (or DMA requests). 
                (#@) Enable the corresponding interrupt (or DMA request) using the function 
                     TIM_ITConfig(TIMx, TIM_IT_CCx) (or TIM_DMA_Cmd(TIMx, TIM_DMA_CCx))

Function Documentation

void TIM_CCxCmd	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_Channel,
		uint16_t	TIM_CCx
	)

Enables or disables the TIM Capture Compare Channel x.

Parameters

TIMx	where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
TIM_Channel	specifies the TIM Channel This parameter can be one of the following values: TIM_Channel_1: TIM Channel 1 TIM_Channel_2: TIM Channel 2 TIM_Channel_3: TIM Channel 3 TIM_Channel_4: TIM Channel 4
TIM_CCx	specifies the TIM Channel CCxE bit new state. This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable.

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_Channel	specifies the TIM Channel This parameter can be one of the following values: TIM_Channel_1: TIM Channel 1 TIM_Channel_2: TIM Channel 2 TIM_Channel_3: TIM Channel 3 TIM_Channel_4: TIM Channel 4 TIM_Channel_5: TIM Channel 5 TIM_Channel_6: TIM Channel 6
TIM_CCx	specifies the TIM Channel CCxE bit new state. This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable.

Return values

None

Definition at line 1786 of file stm32f4xx_tim.c.

void TIM_CCxNCmd	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_Channel,
		uint16_t	TIM_CCxN
	)

Enables or disables the TIM Capture Compare Channel xN.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_Channel	specifies the TIM Channel This parameter can be one of the following values: TIM_Channel_1: TIM Channel 1 TIM_Channel_2: TIM Channel 2 TIM_Channel_3: TIM Channel 3
TIM_CCxN	specifies the TIM Channel CCxNE bit new state. This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable.

Return values

None

Parameters

TIMx	where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_Channel	specifies the TIM Channel This parameter can be one of the following values: TIM_Channel_1: TIM Channel 1 TIM_Channel_2: TIM Channel 2 TIM_Channel_3: TIM Channel 3
TIM_CCxN	specifies the TIM Channel CCxNE bit new state. This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable.

Return values

None

Definition at line 1816 of file stm32f4xx_tim.c.

void TIM_ClearOC1Ref	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCClear
	)

Clears or safeguards the OCREF1 signal on an external event.

Parameters

TIMx	where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
TIM_OCClear	new state of the Output Compare Clear Enable Bit. This parameter can be one of the following values: TIM_OCClear_Enable: TIM Output clear enable TIM_OCClear_Disable: TIM Output clear disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_OCClear	new state of the Output Compare Clear Enable Bit. This parameter can be one of the following values: TIM_OCClear_Enable: TIM Output clear enable TIM_OCClear_Disable: TIM Output clear disable

Return values

None

Definition at line 1476 of file stm32f4xx_tim.c.

void TIM_ClearOC2Ref	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCClear
	)

Clears or safeguards the OCREF2 signal on an external event.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
TIM_OCClear	new state of the Output Compare Clear Enable Bit. This parameter can be one of the following values: TIM_OCClear_Enable: TIM Output clear enable TIM_OCClear_Disable: TIM Output clear disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8 or 15 to select the TIM peripheral.
TIM_OCClear	new state of the Output Compare Clear Enable Bit. This parameter can be one of the following values: TIM_OCClear_Enable: TIM Output clear enable TIM_OCClear_Disable: TIM Output clear disable

Return values

None

Definition at line 1506 of file stm32f4xx_tim.c.

void TIM_ClearOC3Ref	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCClear
	)

Clears or safeguards the OCREF3 signal on an external event.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCClear	new state of the Output Compare Clear Enable Bit. This parameter can be one of the following values: TIM_OCClear_Enable: TIM Output clear enable TIM_OCClear_Disable: TIM Output clear disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_OCClear	new state of the Output Compare Clear Enable Bit. This parameter can be one of the following values: TIM_OCClear_Enable: TIM Output clear enable TIM_OCClear_Disable: TIM Output clear disable

Return values

None

Definition at line 1535 of file stm32f4xx_tim.c.

void TIM_ClearOC4Ref	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCClear
	)

Clears or safeguards the OCREF4 signal on an external event.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCClear	new state of the Output Compare Clear Enable Bit. This parameter can be one of the following values: TIM_OCClear_Enable: TIM Output clear enable TIM_OCClear_Disable: TIM Output clear disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_OCClear	new state of the Output Compare Clear Enable Bit. This parameter can be one of the following values: TIM_OCClear_Enable: TIM Output clear enable TIM_OCClear_Disable: TIM Output clear disable

Return values

None

Definition at line 1564 of file stm32f4xx_tim.c.

void TIM_ClearOC5Ref	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCClear
	)

Clears or safeguards the OCREF5 signal on an external event.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_OCClear	new state of the Output Compare Clear Enable Bit. This parameter can be one of the following values: TIM_OCClear_Enable: TIM Output clear enable TIM_OCClear_Disable: TIM Output clear disable

Return values

None

Definition at line 1952 of file stm32f30x_tim.c.

void TIM_ClearOC6Ref	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCClear
	)

Clears or safeguards the OCREF6 signal on an external event.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_OCClear	new state of the Output Compare Clear Enable Bit. This parameter can be one of the following values: TIM_OCClear_Enable: TIM Output clear enable TIM_OCClear_Disable: TIM Output clear disable

Return values

None

Definition at line 1981 of file stm32f30x_tim.c.

void TIM_ForcedOC1Config	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_ForcedAction
	)

Forces the TIMx output 1 waveform to active or inactive level.

Parameters

TIMx	where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
TIM_ForcedAction	specifies the forced Action to be set to the output waveform. This parameter can be one of the following values: TIM_ForcedAction_Active: Force active level on OC1REF TIM_ForcedAction_InActive: Force inactive level on OC1REF.

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_ForcedAction	specifies the forced Action to be set to the output waveform. This parameter can be one of the following values: TIM_ForcedAction_Active: Force active level on OC1REF TIM_ForcedAction_InActive: Force inactive level on OC1REF.

Return values

None

Definition at line 1124 of file stm32f4xx_tim.c.

void TIM_ForcedOC2Config	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_ForcedAction
	)

Forces the TIMx output 2 waveform to active or inactive level.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
TIM_ForcedAction	specifies the forced Action to be set to the output waveform. This parameter can be one of the following values: TIM_ForcedAction_Active: Force active level on OC2REF TIM_ForcedAction_InActive: Force inactive level on OC2REF.

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8 or 15 to select the TIM peripheral.
TIM_ForcedAction	specifies the forced Action to be set to the output waveform. This parameter can be one of the following values: TIM_ForcedAction_Active: Force active level on OC2REF TIM_ForcedAction_InActive: Force inactive level on OC2REF.

Return values

None

Definition at line 1153 of file stm32f4xx_tim.c.

void TIM_ForcedOC3Config	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_ForcedAction
	)

Forces the TIMx output 3 waveform to active or inactive level.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ForcedAction	specifies the forced Action to be set to the output waveform. This parameter can be one of the following values: TIM_ForcedAction_Active: Force active level on OC3REF TIM_ForcedAction_InActive: Force inactive level on OC3REF.

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_ForcedAction	specifies the forced Action to be set to the output waveform. This parameter can be one of the following values: TIM_ForcedAction_Active: Force active level on OC3REF TIM_ForcedAction_InActive: Force inactive level on OC3REF.

Return values

None

Definition at line 1181 of file stm32f4xx_tim.c.

void TIM_ForcedOC4Config	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_ForcedAction
	)

Forces the TIMx output 4 waveform to active or inactive level.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ForcedAction	specifies the forced Action to be set to the output waveform. This parameter can be one of the following values: TIM_ForcedAction_Active: Force active level on OC4REF TIM_ForcedAction_InActive: Force inactive level on OC4REF.

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_ForcedAction	specifies the forced Action to be set to the output waveform. This parameter can be one of the following values: TIM_ForcedAction_Active: Force active level on OC4REF TIM_ForcedAction_InActive: Force inactive level on OC4REF.

Return values

None

Definition at line 1210 of file stm32f4xx_tim.c.

void TIM_ForcedOC5Config	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_ForcedAction
	)

Forces the TIMx output 5 waveform to active or inactive level.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_ForcedAction	specifies the forced Action to be set to the output waveform. This parameter can be one of the following values: TIM_ForcedAction_Active: Force active level on OC5REF TIM_ForcedAction_InActive: Force inactive level on OC5REF.

Return values

None

Definition at line 1483 of file stm32f30x_tim.c.

void TIM_ForcedOC6Config	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_ForcedAction
	)

Forces the TIMx output 6 waveform to active or inactive level.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_ForcedAction	specifies the forced Action to be set to the output waveform. This parameter can be one of the following values: TIM_ForcedAction_Active: Force active level on OC5REF TIM_ForcedAction_InActive: Force inactive level on OC5REF.

Return values

None

Definition at line 1511 of file stm32f30x_tim.c.

void TIM_OC1FastConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCFast
	)

Configures the TIMx Output Compare 1 Fast feature.

Parameters

TIMx	where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
TIM_OCFast	new state of the Output Compare Fast Enable Bit. This parameter can be one of the following values: TIM_OCFast_Enable: TIM output compare fast enable TIM_OCFast_Disable: TIM output compare fast disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_OCFast	new state of the Output Compare Fast Enable Bit. This parameter can be one of the following values: TIM_OCFast_Enable: TIM output compare fast enable TIM_OCFast_Disable: TIM output compare fast disable

Return values

None

Definition at line 1355 of file stm32f4xx_tim.c.

void TIM_OC1Init	(	TIM_TypeDef *	TIMx,
		TIM_OCInitTypeDef *	TIM_OCInitStruct
	)

Initializes the TIMx Channel1 according to the specified parameters in the TIM_OCInitStruct.

Parameters

TIMx	where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
TIM_OCInitStruct	pointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8, 15, 16 or 17, to select the TIM peripheral.
TIM_OCInitStruct	pointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.

Return values

None

Definition at line 673 of file stm32f4xx_tim.c.

void TIM_OC1NPolarityConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCNPolarity
	)

Configures the TIMx Channel 1N polarity.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_OCNPolarity	specifies the OC1N Polarity This parameter can be one of the following values: TIM_OCNPolarity_High: Output Compare active high TIM_OCNPolarity_Low: Output Compare active low

Return values

None

Parameters

TIMx	where x can be 1, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_OCNPolarity	specifies the OC1N Polarity This parameter can be one of the following values: TIM_OCNPolarity_High: Output Compare active high TIM_OCNPolarity_Low: Output Compare active low

Return values

None

Definition at line 1620 of file stm32f4xx_tim.c.

void TIM_OC1PolarityConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPolarity
	)

Configures the TIMx channel 1 polarity.

Parameters

TIMx	where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
TIM_OCPolarity	specifies the OC1 Polarity This parameter can be one of the following values: TIM_OCPolarity_High: Output Compare active high TIM_OCPolarity_Low: Output Compare active low

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_OCPolarity	specifies the OC1 Polarity This parameter can be one of the following values: TIM_OCPolarity_High: Output Compare active high TIM_OCPolarity_Low: Output Compare active low

Return values

None

Definition at line 1593 of file stm32f4xx_tim.c.

void TIM_OC1PreloadConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPreload
	)

Enables or disables the TIMx peripheral Preload register on CCR1.

Parameters

TIMx	where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
TIM_OCPreload	new state of the TIMx peripheral Preload register This parameter can be one of the following values: TIM_OCPreload_Enable TIM_OCPreload_Disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_OCPreload	new state of the TIMx peripheral Preload register This parameter can be one of the following values: TIM_OCPreload_Enable TIM_OCPreload_Disable

Return values

None

Definition at line 1238 of file stm32f4xx_tim.c.

void TIM_OC2FastConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCFast
	)

Configures the TIMx Output Compare 2 Fast feature.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
TIM_OCFast	new state of the Output Compare Fast Enable Bit. This parameter can be one of the following values: TIM_OCFast_Enable: TIM output compare fast enable TIM_OCFast_Disable: TIM output compare fast disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8 or 15 to select the TIM peripheral.
TIM_OCFast	new state of the Output Compare Fast Enable Bit. This parameter can be one of the following values: TIM_OCFast_Enable: TIM output compare fast enable TIM_OCFast_Disable: TIM output compare fast disable

Return values

None

Definition at line 1386 of file stm32f4xx_tim.c.

void TIM_OC2Init	(	TIM_TypeDef *	TIMx,
		TIM_OCInitTypeDef *	TIM_OCInitStruct
	)

Initializes the TIMx Channel2 according to the specified parameters in the TIM_OCInitStruct.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
TIM_OCInitStruct	pointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8 or 15 to select the TIM peripheral.
TIM_OCInitStruct	pointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.

Return values

None

Definition at line 754 of file stm32f4xx_tim.c.

void TIM_OC2NPolarityConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCNPolarity
	)

Configures the TIMx Channel 2N polarity.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_OCNPolarity	specifies the OC2N Polarity This parameter can be one of the following values: TIM_OCNPolarity_High: Output Compare active high TIM_OCNPolarity_Low: Output Compare active low

Return values

None

Definition at line 1674 of file stm32f4xx_tim.c.

void TIM_OC2PolarityConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPolarity
	)

Configures the TIMx channel 2 polarity.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
TIM_OCPolarity	specifies the OC2 Polarity This parameter can be one of the following values: TIM_OCPolarity_High: Output Compare active high TIM_OCPolarity_Low: Output Compare active low

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 8 or 15 to select the TIM peripheral.
TIM_OCPolarity	specifies the OC2 Polarity This parameter can be one of the following values: TIM_OCPolarity_High: Output Compare active high TIM_OCPolarity_Low: Output Compare active low

Return values

None

Definition at line 1647 of file stm32f4xx_tim.c.

void TIM_OC2PreloadConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPreload
	)

Enables or disables the TIMx peripheral Preload register on CCR2.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
TIM_OCPreload	new state of the TIMx peripheral Preload register This parameter can be one of the following values: TIM_OCPreload_Enable TIM_OCPreload_Disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8 or 15 to select the TIM peripheral.
TIM_OCPreload	new state of the TIMx peripheral Preload register This parameter can be one of the following values: TIM_OCPreload_Enable TIM_OCPreload_Disable

Return values

None

Definition at line 1268 of file stm32f4xx_tim.c.

void TIM_OC3FastConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCFast
	)

Configures the TIMx Output Compare 3 Fast feature.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCFast	new state of the Output Compare Fast Enable Bit. This parameter can be one of the following values: TIM_OCFast_Enable: TIM output compare fast enable TIM_OCFast_Disable: TIM output compare fast disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_OCFast	new state of the Output Compare Fast Enable Bit. This parameter can be one of the following values: TIM_OCFast_Enable: TIM output compare fast enable TIM_OCFast_Disable: TIM output compare fast disable

Return values

None

Definition at line 1416 of file stm32f4xx_tim.c.

void TIM_OC3Init	(	TIM_TypeDef *	TIMx,
		TIM_OCInitTypeDef *	TIM_OCInitStruct
	)

Initializes the TIMx Channel3 according to the specified parameters in the TIM_OCInitStruct.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCInitStruct	pointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_OCInitStruct	pointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.

Return values

None

Definition at line 835 of file stm32f4xx_tim.c.

void TIM_OC3NPolarityConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCNPolarity
	)

Configures the TIMx Channel 3N polarity.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_OCNPolarity	specifies the OC3N Polarity This parameter can be one of the following values: TIM_OCNPolarity_High: Output Compare active high TIM_OCNPolarity_Low: Output Compare active low

Return values

None

Definition at line 1728 of file stm32f4xx_tim.c.

void TIM_OC3PolarityConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPolarity
	)

Configures the TIMx channel 3 polarity.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCPolarity	specifies the OC3 Polarity This parameter can be one of the following values: TIM_OCPolarity_High: Output Compare active high TIM_OCPolarity_Low: Output Compare active low

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_OCPolarity	specifies the OC3 Polarity This parameter can be one of the following values: TIM_OCPolarity_High: Output Compare active high TIM_OCPolarity_Low: Output Compare active low

Return values

None

Definition at line 1701 of file stm32f4xx_tim.c.

void TIM_OC3PreloadConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPreload
	)

Enables or disables the TIMx peripheral Preload register on CCR3.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCPreload	new state of the TIMx peripheral Preload register This parameter can be one of the following values: TIM_OCPreload_Enable TIM_OCPreload_Disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_OCPreload	new state of the TIMx peripheral Preload register This parameter can be one of the following values: TIM_OCPreload_Enable TIM_OCPreload_Disable

Return values

None

Definition at line 1297 of file stm32f4xx_tim.c.

void TIM_OC4FastConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCFast
	)

Configures the TIMx Output Compare 4 Fast feature.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCFast	new state of the Output Compare Fast Enable Bit. This parameter can be one of the following values: TIM_OCFast_Enable: TIM output compare fast enable TIM_OCFast_Disable: TIM output compare fast disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_OCFast	new state of the Output Compare Fast Enable Bit. This parameter can be one of the following values: TIM_OCFast_Enable: TIM output compare fast enable TIM_OCFast_Disable: TIM output compare fast disable

Return values

None

Definition at line 1446 of file stm32f4xx_tim.c.

void TIM_OC4Init	(	TIM_TypeDef *	TIMx,
		TIM_OCInitTypeDef *	TIM_OCInitStruct
	)

Initializes the TIMx Channel4 according to the specified parameters in the TIM_OCInitStruct.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCInitStruct	pointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_OCInitStruct	pointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.

Return values

None

Definition at line 915 of file stm32f4xx_tim.c.

void TIM_OC4PolarityConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPolarity
	)

Configures the TIMx channel 4 polarity.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCPolarity	specifies the OC4 Polarity This parameter can be one of the following values: TIM_OCPolarity_High: Output Compare active high TIM_OCPolarity_Low: Output Compare active low

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_OCPolarity	specifies the OC4 Polarity This parameter can be one of the following values: TIM_OCPolarity_High: Output Compare active high TIM_OCPolarity_Low: Output Compare active low

Return values

None

Definition at line 1755 of file stm32f4xx_tim.c.

void TIM_OC4PreloadConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPreload
	)

Enables or disables the TIMx peripheral Preload register on CCR4.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_OCPreload	new state of the TIMx peripheral Preload register This parameter can be one of the following values: TIM_OCPreload_Enable TIM_OCPreload_Disable

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4 or 8 to select the TIM peripheral.
TIM_OCPreload	new state of the TIMx peripheral Preload register This parameter can be one of the following values: TIM_OCPreload_Enable TIM_OCPreload_Disable

Return values

None

Definition at line 1326 of file stm32f4xx_tim.c.

void TIM_OC5Init	(	TIM_TypeDef *	TIMx,
		TIM_OCInitTypeDef *	TIM_OCInitStruct
	)

Initializes the TIMx Channel5 according to the specified parameters in the TIM_OCInitStruct.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_OCInitStruct	pointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.

Return values

None

Definition at line 982 of file stm32f30x_tim.c.

void TIM_OC5PolarityConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPolarity
	)

Configures the TIMx channel 5 polarity.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_OCPolarity	specifies the OC5 Polarity This parameter can be one of the following values: TIM_OCPolarity_High: Output Compare active high TIM_OCPolarity_Low: Output Compare active low

Return values

None

Definition at line 2219 of file stm32f30x_tim.c.

void TIM_OC5PreloadConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPreload
	)

Enables or disables the TIMx peripheral Preload register on CCR5.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_OCPreload	new state of the TIMx peripheral Preload register This parameter can be one of the following values: TIM_OCPreload_Enable TIM_OCPreload_Disable

Return values

None

Definition at line 1656 of file stm32f30x_tim.c.

void TIM_OC6Init	(	TIM_TypeDef *	TIMx,
		TIM_OCInitTypeDef *	TIM_OCInitStruct
	)

Initializes the TIMx Channel6 according to the specified parameters in the TIM_OCInitStruct.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_OCInitStruct	pointer to a TIM_OCInitTypeDef structure that contains the configuration information for the specified TIM peripheral.

Return values

None

Definition at line 1046 of file stm32f30x_tim.c.

void TIM_OC6PolarityConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPolarity
	)

Configures the TIMx channel 6 polarity.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_OCPolarity	specifies the OC6 Polarity This parameter can be one of the following values: TIM_OCPolarity_High: Output Compare active high TIM_OCPolarity_Low: Output Compare active low

Return values

None

Definition at line 2246 of file stm32f30x_tim.c.

void TIM_OC6PreloadConfig	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCPreload
	)

Enables or disables the TIMx peripheral Preload register on CCR6.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
TIM_OCPreload	new state of the TIMx peripheral Preload register This parameter can be one of the following values: TIM_OCPreload_Enable TIM_OCPreload_Disable

Return values

None

Definition at line 1685 of file stm32f30x_tim.c.

void TIM_OCStructInit ( TIM_OCInitTypeDef * TIM_OCInitStruct )

Fills each TIM_OCInitStruct member with its default value.

Parameters

TIM_OCInitStruct pointer to a TIM_OCInitTypeDef structure which will be initialized.

Return values

None

Definition at line 978 of file stm32f4xx_tim.c.

void TIM_SelectGC5C1	(	TIM_TypeDef *	TIMx,
		FunctionalState	NewState
	)

Selects the TIM Group Channel 5 and Channel 1, OC1REFC is the logical AND of OC1REFC and OC5REF.

Parameters

TIMx	where x can be 1 or 8 to select the TIMx peripheral
NewState	new state of the Commutation event. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 1110 of file stm32f30x_tim.c.

void TIM_SelectGC5C2	(	TIM_TypeDef *	TIMx,
		FunctionalState	NewState
	)

Selects the TIM Group Channel 5 and Channel 2, OC2REFC is the logical AND of OC2REFC and OC5REF.

Parameters

TIMx	where x can be 1 or 8 to select the TIMx peripheral
NewState	new state of the Commutation event. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 1136 of file stm32f30x_tim.c.

void TIM_SelectGC5C3	(	TIM_TypeDef *	TIMx,
		FunctionalState	NewState
	)

Selects the TIM Group Channel 5 and Channel 3, OC3REFC is the logical AND of OC3REFC and OC5REF.

Parameters

TIMx	where x can be 1 or 8 to select the TIMx peripheral
NewState	new state of the Commutation event. This parameter can be: ENABLE or DISABLE.

Return values

None

Definition at line 1163 of file stm32f30x_tim.c.

void TIM_SelectOCREFClear	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_OCReferenceClear
	)

Selects the OCReference Clear source.

Parameters

TIMx	where x can be 1, 2, 3, 4, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_OCReferenceClear	specifies the OCReference Clear source. This parameter can be one of the following values: TIM_OCReferenceClear_ETRF: The internal OCreference clear input is connected to ETRF. TIM_OCReferenceClear_OCREFCLR: The internal OCreference clear input is connected to OCREF_CLR input.

Return values

None

Definition at line 2010 of file stm32f30x_tim.c.

void TIM_SelectOCxM	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_Channel,
		uint16_t	TIM_OCMode
	)

Selects the TIM Output Compare Mode.

Note: This function disables the selected channel before changing the Output Compare Mode. If needed, user has to enable this channel using TIM_CCxCmd() and TIM_CCxNCmd() functions.

Parameters

TIMx	where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
TIM_Channel	specifies the TIM Channel This parameter can be one of the following values: TIM_Channel_1: TIM Channel 1 TIM_Channel_2: TIM Channel 2 TIM_Channel_3: TIM Channel 3 TIM_Channel_4: TIM Channel 4
TIM_OCMode	specifies the TIM Output Compare Mode. This parameter can be one of the following values: TIM_OCMode_Timing TIM_OCMode_Active TIM_OCMode_Toggle TIM_OCMode_PWM1 TIM_OCMode_PWM2 TIM_ForcedAction_Active TIM_ForcedAction_InActive

Return values

None

Definition at line 1014 of file stm32f4xx_tim.c.

void TIM_SelectOCxM	(	TIM_TypeDef *	TIMx,
		uint16_t	TIM_Channel,
		uint32_t	TIM_OCMode
	)

Selects the TIM Output Compare Mode.

Note: This function disables the selected channel before changing the Output Compare Mode. If needed, user has to enable this channel using TIM_CCxCmd() and TIM_CCxNCmd() functions.

Parameters

TIMx	where x can be 1, 2, 3, 4, 8, 15, 16 or 17 to select the TIM peripheral.
TIM_Channel	specifies the TIM Channel This parameter can be one of the following values: TIM_Channel_1: TIM Channel 1 TIM_Channel_2: TIM Channel 2 TIM_Channel_3: TIM Channel 3 TIM_Channel_4: TIM Channel 4
TIM_OCMode	specifies the TIM Output Compare Mode. This parameter can be one of the following values: TIM_OCMode_Timing TIM_OCMode_Active TIM_OCMode_Toggle TIM_OCMode_PWM1 TIM_OCMode_PWM2 TIM_ForcedAction_Active TIM_ForcedAction_InActive TIM_OCMode_Retrigerrable_OPM1 TIM_OCMode_Retrigerrable_OPM2 TIM_OCMode_Combined_PWM1 TIM_OCMode_Combined_PWM2 TIM_OCMode_Asymmetric_PWM1 TIM_OCMode_Asymmetric_PWM2

Return values

None

Definition at line 1229 of file stm32f30x_tim.c.

void TIM_SetCompare1	(	TIM_TypeDef *	TIMx,
		uint32_t	Compare1
	)

Sets the TIMx Capture Compare1 Register value.

Parameters

TIMx	where x can be 1 to 14 except 6 and 7, to select the TIM peripheral.
Compare1	specifies the Capture Compare1 register new value.

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8, 15, 16 or 17 to select the TIM peripheral.
Compare1	specifies the Capture Compare1 register new value.

Return values

None

Definition at line 1060 of file stm32f4xx_tim.c.

void TIM_SetCompare2	(	TIM_TypeDef *	TIMx,
		uint32_t	Compare2
	)

Sets the TIMx Capture Compare2 Register value.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
Compare2	specifies the Capture Compare2 register new value.

Return values

None

Parameters

TIMx	where x can be 1, 2, 3, 4, 8 or 15 to select the TIM peripheral.
Compare2	specifies the Capture Compare2 register new value.

Return values

None

Definition at line 1076 of file stm32f4xx_tim.c.

void TIM_SetCompare3	(	TIM_TypeDef *	TIMx,
		uint32_t	Compare3
	)

Sets the TIMx Capture Compare3 Register value.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
Compare3	specifies the Capture Compare3 register new value.

Return values

None

Definition at line 1091 of file stm32f4xx_tim.c.

void TIM_SetCompare4	(	TIM_TypeDef *	TIMx,
		uint32_t	Compare4
	)

Sets the TIMx Capture Compare4 Register value.

Parameters

TIMx	where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
Compare4	specifies the Capture Compare4 register new value.

Return values

None

Definition at line 1106 of file stm32f4xx_tim.c.

void TIM_SetCompare5	(	TIM_TypeDef *	TIMx,
		uint32_t	Compare5
	)

Sets the TIMx Capture Compare5 Register value.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
Compare5	specifies the Capture Compare5 register new value.

Return values

None

Definition at line 1336 of file stm32f30x_tim.c.

void TIM_SetCompare6	(	TIM_TypeDef *	TIMx,
		uint32_t	Compare6
	)

Sets the TIMx Capture Compare6 Register value.

Parameters

TIMx	where x can be 1 or 8 to select the TIM peripheral.
Compare6	specifies the Capture Compare5 register new value.

Return values

None

Definition at line 1351 of file stm32f30x_tim.c.

Functions

Detailed Description

Function Documentation