Peripheral State functions. More...

Collaboration diagram for Peripheral State methods:

Functions
static void	HRTIM_CaptureUnitConfig (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t CaptureUnit, uint32_t Event)
	Configures a capture unit. More...

static void	HRTIM_CompareUnitConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, uint32_t CompareUnit, HRTIM_CompareCfgTypeDef pCompareCfg)
	Configures a compare unit. More...

static void	HRTIM_ExternalEventConfig (HRTIM_TypeDef HRTIMx, uint32_t Event, HRTIM_EventCfgTypeDef pEventCfg)
	Configures an external event channel. More...

uint32_t	HRTIM_GetBurstStatus (HRTIM_TypeDef *HRTIMx)
	Returns the actual status (active or inactive) of the burst mode controller. More...

uint32_t	HRTIM_GetCapturedValue (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t CaptureUnit)
	Returns actual value of the capture register of the designated capture unit. More...

uint32_t	HRTIM_GetCurrentPushPullStatus (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx)
	Indicates on which output the signal is currently active (when the push pull mode is enabled) More...

uint32_t	HRTIM_GetDelayedProtectionStatus (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t Output)
	Returns the level (active or inactive) of the designated output when the delayed protection was triggered. More...

uint32_t	HRTIM_GetIdlePushPullStatus (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx)
	Indicates on which output the signal was applied, in push-pull mode balanced fault mode or delayed idle mode, when the protection was triggered. More...

static void	HRTIM_MasterBase_Config (HRTIM_TypeDef HRTIMx, HRTIM_BaseInitTypeDef HRTIM_BaseInitStruct)
	Configures the master timer time base. More...

static void	HRTIM_MasterWaveform_Config (HRTIM_TypeDef HRTIMx, HRTIM_TimerInitTypeDef pTimerInit)
	Configures the master timer in waveform mode. More...

static void	HRTIM_OutputConfig (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, uint32_t Output, HRTIM_OutputCfgTypeDef pOutputCfg)
	Configures the output of a timing unit. More...

static void	HRTIM_TIM_ResetConfig (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t Event)
	Configures the timer counter reset. More...

static void	HRTIM_TimingUnitBase_Config (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, HRTIM_BaseInitTypeDef HRTIM_BaseInitStruct)
	Configures timing unit (timer A to timer E) time base. More...

static void	HRTIM_TimingUnitWaveform_Config (HRTIM_TypeDef HRTIMx, uint32_t TimerIdx, HRTIM_TimerInitTypeDef pTimerInit)
	Configures timing unit (timer A to timer E) in waveform mode. More...

uint32_t	HRTIM_WaveformGetOutputLevel (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t Output)
	Returns actual level (active or inactive) of the designated output. More...

uint32_t	HRTIM_WaveformGetOutputState (HRTIM_TypeDef *HRTIMx, uint32_t TimerIdx, uint32_t Output)
	Returns actual state (RUN, IDLE, FAULT) of the designated output. More...

Detailed Description

Peripheral State functions.

 ===============================================================================
                      ##### Peripheral State methods #####
 ===============================================================================  
    [..]
    This subsection permit to get in run-time the status of the peripheral 
    and the data flow.

Function Documentation

void HRTIM_CaptureUnitConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	CaptureUnit,
		uint32_t	Event
	)

static

Configures a capture unit.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index
CaptureUnit	Capture unit identifier
pCaptureCfg	pointer to the compare unit configuration data structure

Return values

None

Definition at line 3726 of file stm32f30x_hrtim.c.

void HRTIM_CompareUnitConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	CompareUnit,
		HRTIM_CompareCfgTypeDef *	pCompareCfg
	)

static

Configures a compare unit.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index
CompareUnit	Compare unit identifier
pCompareCfg	pointer to the compare unit configuration data structure

Return values

None

Definition at line 3653 of file stm32f30x_hrtim.c.

static void HRTIM_ExternalEventConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	Event,
		HRTIM_EventCfgTypeDef *	pEventCfg
	)

static

Configures an external event channel.

Parameters

HRTIMx	pointer to HRTIMx peripheral
Event	Event channel identifier
pEventCfg	pointer to the event channel configuration data structure

Return values

None

Definition at line 3893 of file stm32f30x_hrtim.c.

uint32_t HRTIM_GetBurstStatus ( HRTIM_TypeDef * HRTIMx )

Returns the actual status (active or inactive) of the burst mode controller.

Parameters

HRTIMx pointer to HRTIMx peripheral

Return values

Burst mode controller status

Definition at line 3401 of file stm32f30x_hrtim.c.

uint32_t HRTIM_GetCapturedValue	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	CaptureUnit
	)

Returns actual value of the capture register of the designated capture unit.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
CaptureUnit	Capture unit to trig This parameter can be one of the following values: HRTIM_CAPTUREUNIT_1: Capture unit 1 HRTIM_CAPTUREUNIT_2: Capture unit 2

Return values

Captured value

Definition at line 3101 of file stm32f30x_hrtim.c.

uint32_t HRTIM_GetCurrentPushPullStatus	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx
	)

Indicates on which output the signal is currently active (when the push pull mode is enabled)

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E

Return values

Burst mode controller status

Definition at line 3420 of file stm32f30x_hrtim.c.

uint32_t HRTIM_GetDelayedProtectionStatus	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Output
	)

Returns the level (active or inactive) of the designated output when the delayed protection was triggered.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
Output	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TD1: Timer E - Output 1 HRTIM_OUTPUT_TD2: Timer E - Output 2

Return values

Delayed protection status

Definition at line 3341 of file stm32f30x_hrtim.c.

uint32_t HRTIM_GetIdlePushPullStatus	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx
	)

Indicates on which output the signal was applied, in push-pull mode balanced fault mode or delayed idle mode, when the protection was triggered.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E

Return values

Idle	Push Pull Status

Definition at line 3444 of file stm32f30x_hrtim.c.

void HRTIM_MasterBase_Config	(	HRTIM_TypeDef *	HRTIMx,
		HRTIM_BaseInitTypeDef *	HRTIM_BaseInitStruct
	)

static

Configures the master timer time base.

Parameters

HRTIMx pointer to HRTIMx peripheral

Return values

None

Definition at line 3463 of file stm32f30x_hrtim.c.

void HRTIM_MasterWaveform_Config	(	HRTIM_TypeDef *	HRTIMx,
		HRTIM_TimerInitTypeDef *	pTimerInit
	)

static

Configures the master timer in waveform mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index
pTimerInit	pointer to the timer initialization data structure

Return values

None

Definition at line 3506 of file stm32f30x_hrtim.c.

void HRTIM_OutputConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Output,
		HRTIM_OutputCfgTypeDef *	pOutputCfg
	)

static

Configures the output of a timing unit.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index
Output	timing unit output identifier
pOutputCfg	pointer to the output configuration data structure

Return values

None

Definition at line 3814 of file stm32f30x_hrtim.c.

void HRTIM_TIM_ResetConfig	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Event
	)

static

Configures the timer counter reset.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index
Event	Event channel identifier

Return values

None

Definition at line 4050 of file stm32f30x_hrtim.c.

void HRTIM_TimingUnitBase_Config	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		HRTIM_BaseInitTypeDef *	HRTIM_BaseInitStruct
	)

static

Configures timing unit (timer A to timer E) time base.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index

Return values

None

Definition at line 3484 of file stm32f30x_hrtim.c.

void HRTIM_TimingUnitWaveform_Config	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		HRTIM_TimerInitTypeDef *	pTimerInit
	)

static

Configures timing unit (timer A to timer E) in waveform mode.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index
pTimerInit	pointer to the timer initialization data structure

Return values

None

Definition at line 3561 of file stm32f30x_hrtim.c.

uint32_t HRTIM_WaveformGetOutputLevel	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Output
	)

Returns actual level (active or inactive) of the designated output.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
Output	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

Output level

Note: Returned output level is taken before the output stage (chopper, polarity).

Definition at line 3153 of file stm32f30x_hrtim.c.

uint32_t HRTIM_WaveformGetOutputState	(	HRTIM_TypeDef *	HRTIMx,
		uint32_t	TimerIdx,
		uint32_t	Output
	)

Returns actual state (RUN, IDLE, FAULT) of the designated output.

Parameters

HRTIMx	pointer to HRTIMx peripheral
TimerIdx	Timer index This parameter can be one of the following values: 0x0 to 0x4 for timers A to E
Output	Timer output This parameter can be one of the following values: HRTIM_OUTPUT_TA1: Timer A - Output 1 HRTIM_OUTPUT_TA2: Timer A - Output 2 HRTIM_OUTPUT_TB1: Timer B - Output 1 HRTIM_OUTPUT_TB2: Timer B - Output 2 HRTIM_OUTPUT_TC1: Timer C - Output 1 HRTIM_OUTPUT_TC2: Timer C - Output 2 HRTIM_OUTPUT_TD1: Timer D - Output 1 HRTIM_OUTPUT_TD2: Timer D - Output 2 HRTIM_OUTPUT_TE1: Timer E - Output 1 HRTIM_OUTPUT_TE2: Timer E - Output 2

Return values

Output state

Definition at line 3228 of file stm32f30x_hrtim.c.

Functions

Detailed Description

Function Documentation