Functions

FLASH Memory Programming functions. More...

Collaboration diagram for FLASH Memory Programming functions:

Functions

FLASH_Status FLASH_EraseAllPages (void)
 Erases all FLASH pages. More...
 
FLASH_Status FLASH_EraseAllSectors (uint8_t VoltageRange)
 Erases all FLASH Sectors. More...
 
FLASH_Status FLASH_ErasePage (uint32_t Page_Address)
 Erases a specified page in program memory. More...
 
FLASH_Status FLASH_EraseSector (uint32_t FLASH_Sector, uint8_t VoltageRange)
 Erases a specified FLASH Sector. More...
 
void FLASH_Lock (void)
 Locks the FLASH control register access. More...
 
FLASH_Status FLASH_ProgramByte (uint32_t Address, uint8_t Data)
 Programs a byte (8-bit) at a specified address. More...
 
FLASH_Status FLASH_ProgramDoubleWord (uint32_t Address, uint64_t Data)
 Programs a double word (64-bit) at a specified address. More...
 
FLASH_Status FLASH_ProgramHalfWord (uint32_t Address, uint16_t Data)
 Programs a half word (16-bit) at a specified address. More...
 
FLASH_Status FLASH_ProgramWord (uint32_t Address, uint32_t Data)
 Programs a word (32-bit) at a specified address. More...
 
void FLASH_Unlock (void)
 Unlocks the FLASH control register access. More...
 

Detailed Description

FLASH Memory Programming functions.

 ===============================================================================
                ##### FLASH Memory Programming functions #####
 ===============================================================================   
    [..]
      This group includes the following functions:
      (+) void FLASH_Unlock(void)
      (+) void FLASH_Lock(void)
      (+) FLASH_Status FLASH_EraseSector(uint32_t FLASH_Sector, uint8_t VoltageRange)
      (+) FLASH_Status FLASH_EraseAllSectors(uint8_t VoltageRange)       
      (+) FLASH_Status FLASH_ProgramDoubleWord(uint32_t Address, uint64_t Data)
      (+) FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data)
      (+) FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
      (+) FLASH_Status FLASH_ProgramByte(uint32_t Address, uint8_t Data)  
    [..]   
      Any operation of erase or program should follow these steps:
      (#) Call the FLASH_Unlock() function to enable the FLASH control register access

      (#) Call the desired function to erase sector(s) or program data

      (#) Call the FLASH_Lock() function to disable the FLASH control register access
          (recommended to protect the FLASH memory against possible unwanted operation)
 ===============================================================================
              ##### FLASH Memory Programming functions #####
 ===============================================================================   
    [..] This group includes the following functions:
         (+) void FLASH_Unlock(void);
         (+) void FLASH_Lock(void);
         (+) FLASH_Status FLASH_ErasePage(uint32_t Page_Address);
         (+) FLASH_Status FLASH_EraseAllPages(void);
         (+) FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data);
         (+) FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data);
    [..] Any operation of erase or program should follow these steps:
         (#) Call the FLASH_Unlock() function to enable the FLASH control register 
             program memory access.
         (#) Call the desired function to erase page or program data.
         (#) Call the FLASH_Lock() function to disable the FLASH control register 
             access (recommended to protect the FLASH memory against possible 
             unwanted operation).

Function Documentation

FLASH_Status FLASH_EraseAllPages ( void  )

Erases all FLASH pages.

Note
To correctly run this function, the FLASH_Unlock() function must be called before. all the FLASH_Lock() to disable the flash memory access (recommended to protect the FLASH memory against possible unwanted operation)
Parameters
None
Return values
FLASHStatus: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 298 of file stm32f30x_flash.c.

FLASH_Status FLASH_EraseAllSectors ( uint8_t  VoltageRange)

Erases all FLASH Sectors.

Note
If an erase and a program operations are requested simustaneously, the erase operation is performed before the program one.
Parameters
VoltageRangeThe device voltage range which defines the erase parallelism. This parameter can be one of the following values:
  • VoltageRange_1: when the device voltage range is 1.8V to 2.1V, the operation will be done by byte (8-bit)
  • VoltageRange_2: when the device voltage range is 2.1V to 2.7V, the operation will be done by half word (16-bit)
  • VoltageRange_3: when the device voltage range is 2.7V to 3.6V, the operation will be done by word (32-bit)
  • VoltageRange_4: when the device voltage range is 2.7V to 3.6V + External Vpp, the operation will be done by double word (64-bit)
Return values
FLASHStatus: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE.

Definition at line 432 of file stm32f4xx_flash.c.

FLASH_Status FLASH_ErasePage ( uint32_t  Page_Address)

Erases a specified page in program memory.

Erases a specified FLASH page.

Note
To correctly run this function, the FLASH_Unlock() function must be called before.
Call the FLASH_Lock() to disable the flash memory access (recommended to protect the FLASH memory against possible unwanted operation)
Parameters
Page_AddressThe page address in program memory to be erased.
Note
A Page is erased in the Program memory only if the address to load is the start address of a page (multiple of 1024 bytes).
Return values
FLASHStatus: The returned value can be: FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 260 of file stm32f30x_flash.c.

FLASH_Status FLASH_EraseSector ( uint32_t  FLASH_Sector,
uint8_t  VoltageRange 
)

Erases a specified FLASH Sector.

Note
If an erase and a program operations are requested simustaneously, the erase operation is performed before the program one.
Parameters
FLASH_SectorThe Sector number to be erased. For STM32F40xx/41xx devices this parameter can be a value between FLASH_Sector_0 and FLASH_Sector_11. For STM32F427x/437x devices this parameter can be a value between FLASH_Sector_0 and FLASH_Sector_23.
VoltageRangeThe device voltage range which defines the erase parallelism. This parameter can be one of the following values:
  • VoltageRange_1: when the device voltage range is 1.8V to 2.1V, the operation will be done by byte (8-bit)
  • VoltageRange_2: when the device voltage range is 2.1V to 2.7V, the operation will be done by half word (16-bit)
  • VoltageRange_3: when the device voltage range is 2.7V to 3.6V, the operation will be done by word (32-bit)
  • VoltageRange_4: when the device voltage range is 2.7V to 3.6V + External Vpp, the operation will be done by double word (64-bit)
Return values
FLASHStatus: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE.

Definition at line 364 of file stm32f4xx_flash.c.

void FLASH_Lock ( void  )

Locks the FLASH control register access.

Parameters
None
Return values
None

Definition at line 332 of file stm32f4xx_flash.c.

FLASH_Status FLASH_ProgramByte ( uint32_t  Address,
uint8_t  Data 
)

Programs a byte (8-bit) at a specified address.

Note
This function can be used within all the device supply voltage ranges.
If an erase and a program operations are requested simustaneously, the erase operation is performed before the program one.
Parameters
Addressspecifies the address to be programmed. This parameter can be any address in Program memory zone or in OTP zone.
Dataspecifies the data to be programmed.
Return values
FLASHStatus: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE.

Definition at line 631 of file stm32f4xx_flash.c.

FLASH_Status FLASH_ProgramDoubleWord ( uint32_t  Address,
uint64_t  Data 
)

Programs a double word (64-bit) at a specified address.

Note
This function must be used when the device voltage range is from 2.7V to 3.6V and an External Vpp is present.
If an erase and a program operations are requested simustaneously, the erase operation is performed before the program one.
Parameters
Addressspecifies the address to be programmed.
Dataspecifies the data to be programmed.
Return values
FLASHStatus: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE.

Definition at line 504 of file stm32f4xx_flash.c.

FLASH_Status FLASH_ProgramHalfWord ( uint32_t  Address,
uint16_t  Data 
)

Programs a half word (16-bit) at a specified address.

Programs a half word at a specified address.

Note
This function must be used when the device voltage range is from 2.1V to 3.6V.
If an erase and a program operations are requested simustaneously, the erase operation is performed before the program one.
Parameters
Addressspecifies the address to be programmed. This parameter can be any address in Program memory zone or in OTP zone.
Dataspecifies the data to be programmed.
Return values
FLASHStatus: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE.
Note
To correctly run this function, the FLASH_Unlock() function must be called before. Call the FLASH_Lock() to disable the flash memory access (recommended to protect the FLASH memory against possible unwanted operation)
Parameters
Addressspecifies the address to be programmed.
Dataspecifies the data to be programmed.
Return values
FLASHStatus: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 589 of file stm32f4xx_flash.c.

FLASH_Status FLASH_ProgramWord ( uint32_t  Address,
uint32_t  Data 
)

Programs a word (32-bit) at a specified address.

Programs a word at a specified address.

Note
This function must be used when the device voltage range is from 2.7V to 3.6V.
If an erase and a program operations are requested simustaneously, the erase operation is performed before the program one.
Parameters
Addressspecifies the address to be programmed. This parameter can be any address in Program memory zone or in OTP zone.
Dataspecifies the data to be programmed.
Return values
FLASHStatus: The returned value can be: FLASH_BUSY, FLASH_ERROR_PROGRAM, FLASH_ERROR_WRP, FLASH_ERROR_OPERATION or FLASH_COMPLETE.
Note
To correctly run this function, the FLASH_Unlock() function must be called before. Call the FLASH_Lock() to disable the flash memory access (recommended to protect the FLASH memory against possible unwanted operation)
Parameters
Addressspecifies the address to be programmed.
Dataspecifies the data to be programmed.
Return values
FLASHStatus: The returned value can be: FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.

Definition at line 547 of file stm32f4xx_flash.c.

void FLASH_Unlock ( void  )

Unlocks the FLASH control register access.

Parameters
None
Return values
None

Definition at line 317 of file stm32f4xx_flash.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Wed Jul 3 2019 19:59:29