Data Counter functions. More...

Collaboration diagram for Data Counter functions:

Functions
uint16_t	DMA_GetCurrDataCounter (DMA_Channel_TypeDef *DMAy_Channelx)
	Returns the number of remaining data units in the current DMAy Channelx transfer. More...

uint16_t	DMA_GetCurrDataCounter (DMA_Stream_TypeDef *DMAy_Streamx)
	Returns the number of remaining data units in the current DMAy Streamx transfer. More...

void	DMA_SetCurrDataCounter (DMA_Channel_TypeDef *DMAy_Channelx, uint16_t DataNumber)
	Sets the number of data units in the current DMAy Channelx transfer. More...

void	DMA_SetCurrDataCounter (DMA_Stream_TypeDef *DMAy_Streamx, uint16_t Counter)
	Writes the number of data units to be transferred on the DMAy Streamx. More...

Detailed Description

Data Counter functions.

 ===============================================================================
                      ##### Data Counter functions #####
 ===============================================================================  
    [..]
    This subsection provides function allowing to configure and read the buffer size
    (number of data to be transferred). 
    [..]
    The DMA data counter can be written only when the DMA Stream is disabled 
    (ie. after transfer complete event).
    [..]
    The following function can be used to write the Stream data counter value:
      (+) void DMA_SetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx, uint16_t Counter);
      -@- It is advised to use this function rather than DMA_Init() in situations 
          where only the Data buffer needs to be reloaded.
      -@- If the Source and Destination Data Sizes are different, then the value 
          written in data counter, expressing the number of transfers, is relative 
          to the number of transfers from the Peripheral point of view.
          ie. If Memory data size is Word, Peripheral data size is Half-Words, 
          then the value to be configured in the data counter is the number 
          of Half-Words to be transferred from/to the peripheral.
    [..]
    The DMA data counter can be read to indicate the number of remaining transfers for
    the relative DMA Stream. This counter is decremented at the end of each data 
    transfer and when the transfer is complete: 
      (+) If Normal mode is selected: the counter is set to 0.
      (+) If Circular mode is selected: the counter is reloaded with the initial value
          (configured before enabling the DMA Stream)
     [..]
     The following function can be used to read the Stream data counter value:
       (+) uint16_t DMA_GetCurrDataCounter(DMA_Stream_TypeDef* DMAy_Streamx);

 ===============================================================================
                      ##### Data Counter functions #####
 ===============================================================================
    [..] This subsection provides function allowing to configure and read the buffer 
         size (number of data to be transferred).The DMA data counter can be written 
         only when the DMA channel is disabled (ie. after transfer complete event).
    [..] The following function can be used to write the Channel data counter value:
         (+) void DMA_SetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx, uint16_t DataNumber).
    [..]
    (@) It is advised to use this function rather than DMA_Init() in situations 
        where only the Data buffer needs to be reloaded.
    [..] The DMA data counter can be read to indicate the number of remaining transfers 
         for the relative DMA channel. This counter is decremented at the end of each 
         data transfer and when the transfer is complete: 
         (+) If Normal mode is selected: the counter is set to 0.
         (+) If Circular mode is selected: the counter is reloaded with the initial 
         value(configured before enabling the DMA channel).
    [..] The following function can be used to read the Channel data counter value:
         (+) uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx).

Function Documentation

uint16_t DMA_GetCurrDataCounter ( DMA_Channel_TypeDef * DMAy_Channelx )

Returns the number of remaining data units in the current DMAy Channelx transfer.

Parameters

DMAy_Channelx where y can be 1 or 2 to select the DMA and x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.

Return values

The	number of remaining data units in the current DMAy Channelx transfer.

Definition at line 405 of file stm32f30x_dma.c.

uint16_t DMA_GetCurrDataCounter ( DMA_Stream_TypeDef * DMAy_Streamx )

Returns the number of remaining data units in the current DMAy Streamx transfer.

Parameters

DMAy_Streamx where y can be 1 or 2 to select the DMA and x can be 0 to 7 to select the DMA Stream.

Return values

The	number of remaining data units in the current DMAy Streamx transfer.

Definition at line 647 of file stm32f4xx_dma.c.

void DMA_SetCurrDataCounter	(	DMA_Channel_TypeDef *	DMAy_Channelx,
		uint16_t	DataNumber
	)

Sets the number of data units in the current DMAy Channelx transfer.

Parameters

DMAy_Channelx	where y can be 1 or 2 to select the DMA and x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel.
DataNumber	The number of data units in the current DMAy Channelx transfer.

Note: This function can only be used when the DMAy_Channelx is disabled.

Return values

None.

Definition at line 387 of file stm32f30x_dma.c.

void DMA_SetCurrDataCounter	(	DMA_Stream_TypeDef *	DMAy_Streamx,
		uint16_t	Counter
	)

Writes the number of data units to be transferred on the DMAy Streamx.

Parameters

DMAy_Streamx	where y can be 1 or 2 to select the DMA and x can be 0 to 7 to select the DMA Stream.
Counter	Number of data units to be transferred (from 0 to 65535) Number of data items depends only on the Peripheral data format.

Note: If Peripheral data format is Bytes: number of data units is equal to total number of bytes to be transferred.; If Peripheral data format is Half-Word: number of data units is equal to total number of bytes to be transferred / 2.; If Peripheral data format is Word: number of data units is equal to total number of bytes to be transferred / 4.; In Memory-to-Memory transfer mode, the memory buffer pointed by DMAy_SxPAR register is considered as Peripheral.

Return values

The	number of remaining data units in the current DMAy Streamx transfer.

Definition at line 632 of file stm32f4xx_dma.c.

Functions

Detailed Description

Function Documentation