Functions
Interrupts and flags management functions

Interrupts and flags management functions. More...

Collaboration diagram for Interrupts and flags management functions:

Functions

void DCMI_ClearFlag (uint16_t DCMI_FLAG)
 Clears the DCMI's pending flags. More...
 
void DCMI_ClearITPendingBit (uint16_t DCMI_IT)
 Clears the DCMI's interrupt pending bits. More...
 
FlagStatus DCMI_GetFlagStatus (uint16_t DCMI_FLAG)
 Checks whether the DCMI interface flag is set or not. More...
 
ITStatus DCMI_GetITStatus (uint16_t DCMI_IT)
 Checks whether the DCMI interrupt has occurred or not. More...
 
void DCMI_ITConfig (uint16_t DCMI_IT, FunctionalState NewState)
 Enables or disables the DCMI interface interrupts. More...
 

Detailed Description

Interrupts and flags management functions.

 ===============================================================================
             ##### Interrupts and flags management functions #####
 ===============================================================================  

Function Documentation

void DCMI_ClearFlag ( uint16_t  DCMI_FLAG)

Clears the DCMI's pending flags.

Parameters
DCMI_FLAGspecifies the flag to clear. This parameter can be any combination of the following values:
  • DCMI_FLAG_FRAMERI: Frame capture complete Raw flag mask
  • DCMI_FLAG_OVFRI: Overflow Raw flag mask
  • DCMI_FLAG_ERRRI: Synchronization error Raw flag mask
  • DCMI_FLAG_VSYNCRI: VSYNC Raw flag mask
  • DCMI_FLAG_LINERI: Line Raw flag mask
Return values
None

Definition at line 461 of file stm32f4xx_dcmi.c.

void DCMI_ClearITPendingBit ( uint16_t  DCMI_IT)

Clears the DCMI's interrupt pending bits.

Parameters
DCMI_ITspecifies the DCMI interrupt pending bit to clear. This parameter can be any combination of the following values:
  • DCMI_IT_FRAME: Frame capture complete interrupt mask
  • DCMI_IT_OVF: Overflow interrupt mask
  • DCMI_IT_ERR: Synchronization error interrupt mask
  • DCMI_IT_VSYNC: VSYNC interrupt mask
  • DCMI_IT_LINE: Line interrupt mask
Return values
None

Definition at line 515 of file stm32f4xx_dcmi.c.

FlagStatus DCMI_GetFlagStatus ( uint16_t  DCMI_FLAG)

Checks whether the DCMI interface flag is set or not.

Parameters
DCMI_FLAGspecifies the flag to check. This parameter can be one of the following values:
  • DCMI_FLAG_FRAMERI: Frame capture complete Raw flag mask
  • DCMI_FLAG_OVFRI: Overflow Raw flag mask
  • DCMI_FLAG_ERRRI: Synchronization error Raw flag mask
  • DCMI_FLAG_VSYNCRI: VSYNC Raw flag mask
  • DCMI_FLAG_LINERI: Line Raw flag mask
  • DCMI_FLAG_FRAMEMI: Frame capture complete Masked flag mask
  • DCMI_FLAG_OVFMI: Overflow Masked flag mask
  • DCMI_FLAG_ERRMI: Synchronization error Masked flag mask
  • DCMI_FLAG_VSYNCMI: VSYNC Masked flag mask
  • DCMI_FLAG_LINEMI: Line Masked flag mask
  • DCMI_FLAG_HSYNC: HSYNC flag mask
  • DCMI_FLAG_VSYNC: VSYNC flag mask
  • DCMI_FLAG_FNE: Fifo not empty flag mask
Return values
Thenew state of DCMI_FLAG (SET or RESET).

Definition at line 414 of file stm32f4xx_dcmi.c.

ITStatus DCMI_GetITStatus ( uint16_t  DCMI_IT)

Checks whether the DCMI interrupt has occurred or not.

Parameters
DCMI_ITspecifies the DCMI interrupt source to check. This parameter can be one of the following values:
  • DCMI_IT_FRAME: Frame capture complete interrupt mask
  • DCMI_IT_OVF: Overflow interrupt mask
  • DCMI_IT_ERR: Synchronization error interrupt mask
  • DCMI_IT_VSYNC: VSYNC interrupt mask
  • DCMI_IT_LINE: Line interrupt mask
Return values
Thenew state of DCMI_IT (SET or RESET).

Definition at line 483 of file stm32f4xx_dcmi.c.

void DCMI_ITConfig ( uint16_t  DCMI_IT,
FunctionalState  NewState 
)

Enables or disables the DCMI interface interrupts.

Parameters
DCMI_ITspecifies the DCMI interrupt sources to be enabled or disabled. This parameter can be any combination of the following values:
  • DCMI_IT_FRAME: Frame capture complete interrupt mask
  • DCMI_IT_OVF: Overflow interrupt mask
  • DCMI_IT_ERR: Synchronization error interrupt mask
  • DCMI_IT_VSYNC: VSYNC interrupt mask
  • DCMI_IT_LINE: Line interrupt mask
NewStatenew state of the specified DCMI interrupts. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 377 of file stm32f4xx_dcmi.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Wed Jul 3 2019 19:59:29