Functions

Peripherals Configuration. More...

Collaboration diagram for Peripherals Configuration functions:

Functions

void DBGMCU_APB1PeriphConfig (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures APB1 peripheral behavior when the MCU is in Debug mode. More...
 
void DBGMCU_APB2PeriphConfig (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures APB2 peripheral behavior when the MCU is in Debug mode. More...
 
void DBGMCU_Config (uint32_t DBGMCU_Periph, FunctionalState NewState)
 Configures low power mode behavior when the MCU is in Debug mode. More...
 

Detailed Description

Peripherals Configuration.

  ==============================================================================
               ##### Peripherals Configuration functions #####
  ==============================================================================

Function Documentation

void DBGMCU_APB1PeriphConfig ( uint32_t  DBGMCU_Periph,
FunctionalState  NewState 
)

Configures APB1 peripheral behavior when the MCU is in Debug mode.

Parameters
DBGMCU_Periphspecifies the APB1 peripheral. This parameter can be any combination of the following values:
  • DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted.
  • DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted.
  • DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted.
  • DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted.
  • DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted.
  • DBGMCU_RTC_STOP: RTC Calendar and Wakeup counter are stopped when Core is halted.
  • DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted.
  • DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted.
  • DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted.
  • DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted.
  • DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted.
NewStatenew state of the specified APB1 peripheral in Debug mode. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 152 of file stm32f30x_dbgmcu.c.

void DBGMCU_APB2PeriphConfig ( uint32_t  DBGMCU_Periph,
FunctionalState  NewState 
)

Configures APB2 peripheral behavior when the MCU is in Debug mode.

Parameters
DBGMCU_Periphspecifies the APB2 peripheral. This parameter can be any combination of the following values:
  • DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted.
  • DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted.
  • DBGMCU_TIM15_STOP: TIM15 counter stopped when Core is halted.
  • DBGMCU_TIM16_STOP: TIM16 counter stopped when Core is halted.
  • DBGMCU_TIM17_STOP: TIM17 counter stopped when Core is halted.
NewStatenew state of the specified APB2 peripheral in Debug mode. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 181 of file stm32f30x_dbgmcu.c.

void DBGMCU_Config ( uint32_t  DBGMCU_Periph,
FunctionalState  NewState 
)

Configures low power mode behavior when the MCU is in Debug mode.

Configures the specified peripheral and low power mode behavior when the MCU under Debug mode.

Parameters
DBGMCU_Periphspecifies the low power mode. This parameter can be any combination of the following values:
  • DBGMCU_SLEEP: Keep debugger connection during SLEEP mode.
  • DBGMCU_STOP: Keep debugger connection during STOP mode.
  • DBGMCU_STANDBY: Keep debugger connection during STANDBY mode.
NewStatenew state of the specified low power mode in Debug mode. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 115 of file stm32f30x_dbgmcu.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Wed Jul 3 2019 19:59:30