Functions
CRYP's DMA interface Configuration function

CRYP's DMA interface Configuration function. More...

Collaboration diagram for CRYP's DMA interface Configuration function:

Functions

void CRYP_DMACmd (uint8_t CRYP_DMAReq, FunctionalState NewState)
 Enables or disables the CRYP DMA interface. More...
 

Detailed Description

CRYP's DMA interface Configuration function.

 ===============================================================================
             ##### CRYP's DMA interface Configuration function #####
 ===============================================================================  
 [..] This section provides functions allowing to configure the DMA interface for 
      CRYP data input and output transfer.
   
 [..] When the DMA mode is enabled (using the CRYP_DMACmd() function), data can be 
      transferred:
   (+) From memory to the CRYP IN FIFO using the DMA peripheral by enabling 
       the CRYP_DMAReq_DataIN request.
   (+) From the CRYP OUT FIFO to the memory using the DMA peripheral by enabling 
       the CRYP_DMAReq_DataOUT request.

Function Documentation

void CRYP_DMACmd ( uint8_t  CRYP_DMAReq,
FunctionalState  NewState 
)

Enables or disables the CRYP DMA interface.

Parameters
CRYP_DMAReqspecifies the CRYP DMA transfer request to be enabled or disabled. This parameter can be any combination of the following values:
  • CRYP_DMAReq_DataOUT: DMA for outgoing(Tx) data transfer
  • CRYP_DMAReq_DataIN: DMA for incoming(Rx) data transfer
NewStatenew state of the selected CRYP DMA transfer request. This parameter can be: ENABLE or DISABLE.
Return values
None

Definition at line 681 of file stm32f4xx_cryp.c.



rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Wed Jul 3 2019 19:59:29