Public Attributes | List of all members

CAN init structure definition. More...

#include <stm32f4xx_can.h>

Public Attributes

FunctionalState CAN_ABOM
 
FunctionalState CAN_AWUM
 
uint8_t CAN_BS1
 
uint8_t CAN_BS2
 
uint8_t CAN_Mode
 
FunctionalState CAN_NART
 
uint16_t CAN_Prescaler
 
FunctionalState CAN_RFLM
 
uint8_t CAN_SJW
 
FunctionalState CAN_TTCM
 
FunctionalState CAN_TXFP
 

Detailed Description

CAN init structure definition.

Definition at line 56 of file stm32f4xx_can.h.

Member Data Documentation

FunctionalState CAN_InitTypeDef::CAN_ABOM

Enable or disable the automatic bus-off management. This parameter can be set either to ENABLE or DISABLE.

Definition at line 79 of file stm32f4xx_can.h.

FunctionalState CAN_InitTypeDef::CAN_AWUM

Enable or disable the automatic wake-up mode. This parameter can be set either to ENABLE or DISABLE.

Definition at line 82 of file stm32f4xx_can.h.

uint8_t CAN_InitTypeDef::CAN_BS1

Specifies the number of time quanta in Bit Segment 1. This parameter can be a value of CAN_time_quantum_in_bit_segment_1

Definition at line 69 of file stm32f4xx_can.h.

uint8_t CAN_InitTypeDef::CAN_BS2

Specifies the number of time quanta in Bit Segment 2. This parameter can be a value of CAN_time_quantum_in_bit_segment_2

Definition at line 73 of file stm32f4xx_can.h.

uint8_t CAN_InitTypeDef::CAN_Mode

Specifies the CAN operating mode. This parameter can be a value of CAN_operating_mode

Definition at line 61 of file stm32f4xx_can.h.

FunctionalState CAN_InitTypeDef::CAN_NART

Enable or disable the non-automatic retransmission mode. This parameter can be set either to ENABLE or DISABLE.

Enable or disable the no-automatic retransmission mode. This parameter can be set either to ENABLE or DISABLE.

Definition at line 85 of file stm32f4xx_can.h.

uint16_t CAN_InitTypeDef::CAN_Prescaler

Specifies the length of a time quantum. It ranges from 1 to 1024.

Definition at line 58 of file stm32f4xx_can.h.

FunctionalState CAN_InitTypeDef::CAN_RFLM

Enable or disable the Receive FIFO Locked mode. This parameter can be set either to ENABLE or DISABLE.

Definition at line 88 of file stm32f4xx_can.h.

uint8_t CAN_InitTypeDef::CAN_SJW

Specifies the maximum number of time quanta the CAN hardware is allowed to lengthen or shorten a bit to perform resynchronization. This parameter can be a value of CAN_synchronisation_jump_width

Definition at line 64 of file stm32f4xx_can.h.

FunctionalState CAN_InitTypeDef::CAN_TTCM

Enable or disable the time triggered communication mode. This parameter can be set either to ENABLE or DISABLE.

Definition at line 76 of file stm32f4xx_can.h.

FunctionalState CAN_InitTypeDef::CAN_TXFP

Enable or disable the transmit FIFO priority. This parameter can be set either to ENABLE or DISABLE.

Definition at line 91 of file stm32f4xx_can.h.


The documentation for this struct was generated from the following files:


rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Thu Oct 24 2019 03:17:24