Public Attributes | List of all members

ADC Init structure definition. More...

#include <stm32f4xx_adc.h>

Public Attributes

uint32_t ADC_AutoInjMode
 
uint32_t ADC_ContinuousConvMode
 
FunctionalState ADC_ContinuousConvMode
 
uint32_t ADC_DataAlign
 
uint32_t ADC_ExternalTrigConv
 
uint32_t ADC_ExternalTrigConvEdge
 
uint32_t ADC_ExternalTrigConvEvent
 
uint32_t ADC_ExternalTrigEventEdge
 
uint32_t ADC_Mode
 
uint8_t ADC_NbrOfChannel
 
uint8_t ADC_NbrOfConversion
 
uint8_t ADC_NbrOfRegChannel
 
uint32_t ADC_OverrunMode
 
uint32_t ADC_Resolution
 
FunctionalState ADC_ScanConvMode
 

Detailed Description

ADC Init structure definition.

Definition at line 53 of file stm32f4xx_adc.h.

Member Data Documentation

uint32_t ADC_InitTypeDef::ADC_AutoInjMode

Enable/disable automatic injected group conversion after regular group conversion. This parameter can be set to ENABLE or DISABLE.

Definition at line 71 of file stm32f30x_adc.h.

uint32_t ADC_InitTypeDef::ADC_ContinuousConvMode

Specifies whether the conversion is performed in Continuous or Single mode. This parameter can be set to ENABLE or DISABLE.

Definition at line 56 of file stm32f30x_adc.h.

FunctionalState ADC_InitTypeDef::ADC_ContinuousConvMode

Specifies whether the conversion is performed in Continuous or Single mode. This parameter can be set to ENABLE or DISABLE.

Definition at line 61 of file stm32f4xx_adc.h.

uint32_t ADC_InitTypeDef::ADC_DataAlign

Specifies whether the ADC data alignment is left or right. This parameter can be a value of ADC_data_align

Definition at line 72 of file stm32f4xx_adc.h.

uint32_t ADC_InitTypeDef::ADC_ExternalTrigConv

Select the external event used to trigger the start of conversion of a regular group. This parameter can be a value of ADC_extrenal_trigger_sources_for_regular_channels_conversion

Defines the external trigger used to start the analog to digital conversion of regular channels. This parameter can be a value of ADC_external_trigger_sources_for_regular_channels_conversion

Definition at line 68 of file stm32f4xx_adc.h.

uint32_t ADC_InitTypeDef::ADC_ExternalTrigConvEdge

Select the external trigger edge and enable the trigger of a regular group. This parameter can be a value of ADC_external_trigger_edge_for_regular_channels_conversion

Definition at line 64 of file stm32f4xx_adc.h.

uint32_t ADC_InitTypeDef::ADC_ExternalTrigConvEvent

Defines the external trigger used to start the analog to digital conversion of regular channels. This parameter can be a value of ADC_external_trigger_sources_for_regular_channels_conversion

Definition at line 61 of file stm32f30x_adc.h.

uint32_t ADC_InitTypeDef::ADC_ExternalTrigEventEdge

Select the external trigger edge and enable the trigger of a regular group. This parameter can be a value of ADC_external_trigger_edge_for_regular_channels_conversion

Definition at line 64 of file stm32f30x_adc.h.

uint32_t ADC_InitTypeDef::ADC_Mode

Configures the ADC to operate in independent or dual mode. This parameter can be a value of ADC_mode

Definition at line 52 of file stm32f10x_adc.h.

uint8_t ADC_InitTypeDef::ADC_NbrOfChannel

Specifies the number of ADC channels that will be converted using the sequencer for regular channel group. This parameter must range from 1 to 16.

Definition at line 71 of file stm32f10x_adc.h.

uint8_t ADC_InitTypeDef::ADC_NbrOfConversion

Specifies the number of ADC conversions that will be done using the sequencer for regular channel group. This parameter must range from 1 to 16.

Definition at line 75 of file stm32f4xx_adc.h.

uint8_t ADC_InitTypeDef::ADC_NbrOfRegChannel

Specifies the number of ADC channels that will be converted using the sequencer for regular channel group. This parameter must range from 1 to 16.

Definition at line 74 of file stm32f30x_adc.h.

uint32_t ADC_InitTypeDef::ADC_OverrunMode

Specifies the way data overrun are managed. This parameter can be set to ENABLE or DISABLE.

Definition at line 69 of file stm32f30x_adc.h.

uint32_t ADC_InitTypeDef::ADC_Resolution

Configures the ADC resolution dual mode. This parameter can be a value of ADC_resolution

Configures the ADC resolution. This parameter can be a value of ADC_resolution

Definition at line 55 of file stm32f4xx_adc.h.

FunctionalState ADC_InitTypeDef::ADC_ScanConvMode

Specifies whether the conversion is performed in Scan (multichannels) or Single (one channel) mode. This parameter can be set to ENABLE or DISABLE

Definition at line 57 of file stm32f4xx_adc.h.


The documentation for this struct was generated from the following files:


rosflight_firmware
Author(s): Daniel Koch , James Jackson
autogenerated on Thu Oct 24 2019 03:17:24