|
def | __init__ (self, port_name='/dev/ttyUSB0', port_namespace='ttyUSB0', baud_rate='1000000', min_motor_id=1, max_motor_id=25, update_rate=5, diagnostics_rate=1, error_level_temp=75, warn_level_temp=70, readback_echo=False) |
|
def | connect (self) |
|
def | disconnect (self) |
|
Definition at line 66 of file dynamixel_serial_proxy.py.
def dynamixel_driver.dynamixel_serial_proxy.SerialProxy.__init__ |
( |
|
self, |
|
|
|
port_name = '/dev/ttyUSB0' , |
|
|
|
port_namespace = 'ttyUSB0' , |
|
|
|
baud_rate = '1000000' , |
|
|
|
min_motor_id = 1 , |
|
|
|
max_motor_id = 25 , |
|
|
|
update_rate = 5 , |
|
|
|
diagnostics_rate = 1 , |
|
|
|
error_level_temp = 75 , |
|
|
|
warn_level_temp = 70 , |
|
|
|
readback_echo = False |
|
) |
| |
def dynamixel_driver.dynamixel_serial_proxy.SerialProxy.__fill_motor_parameters |
( |
|
self, |
|
|
|
motor_id, |
|
|
|
model_number |
|
) |
| |
|
private |
Stores some extra information about each motor on the parameter server.
Some of these paramters are used in joint controller implementation.
Definition at line 112 of file dynamixel_serial_proxy.py.
def dynamixel_driver.dynamixel_serial_proxy.SerialProxy.__find_motors |
( |
|
self | ) |
|
|
private |
def dynamixel_driver.dynamixel_serial_proxy.SerialProxy.__publish_diagnostic_information |
( |
|
self | ) |
|
|
private |
def dynamixel_driver.dynamixel_serial_proxy.SerialProxy.__update_motor_states |
( |
|
self | ) |
|
|
private |
def dynamixel_driver.dynamixel_serial_proxy.SerialProxy.connect |
( |
|
self | ) |
|
def dynamixel_driver.dynamixel_serial_proxy.SerialProxy.disconnect |
( |
|
self | ) |
|
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.actual_rate |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.baud_rate |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.current_state |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.diagnostics_pub |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.diagnostics_rate |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.dxl_io |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.error_counts |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.error_level_temp |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.max_motor_id |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.min_motor_id |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.motor_states_pub |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.motor_static_info |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.motors |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.num_ping_retries |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.port_name |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.port_namespace |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.readback_echo |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.running |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.update_rate |
dynamixel_driver.dynamixel_serial_proxy.SerialProxy.warn_level_temp |
The documentation for this class was generated from the following file: