fed_batch_bioreactor2_nnc.cpp

Go to the documentation of this file.

/*
 *    This file is part of ACADO Toolkit.
 *
 *    ACADO Toolkit -- A Toolkit for Automatic Control and Dynamic Optimization.
 *    Copyright (C) 2008-2014 by Boris Houska, Hans Joachim Ferreau,
 *    Milan Vukov, Rien Quirynen, KU Leuven.
 *    Developed within the Optimization in Engineering Center (OPTEC)
 *    under supervision of Moritz Diehl. All rights reserved.
 *
 *    ACADO Toolkit is free software; you can redistribute it and/or
 *    modify it under the terms of the GNU Lesser General Public
 *    License as published by the Free Software Foundation; either
 *    version 3 of the License, or (at your option) any later version.
 *
 *    ACADO Toolkit is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *    Lesser General Public License for more details.
 *
 *    You should have received a copy of the GNU Lesser General Public
 *    License along with ACADO Toolkit; if not, write to the Free Software
 *    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */


#include "acado_optimal_control.hpp"
#include <acado_gnuplot.hpp>


int main( ){

    USING_NAMESPACE_ACADO

    // INTRODUCE FIXED PARAMETERS:
    // ---------------------------
    #define  Csin       2.8

    // INTRODUCE THE VARIABLES:
    // -------------------------
    DifferentialState     x1,x2,x3,x4,x5;
    IntermediateState     mu,sigma,pif;
    Control               u           ;
    Parameter             tf          ;
    DifferentialEquation  f(0.0,tf)   ;


    // DEFINE A DIFFERENTIAL EQUATION:
    // -------------------------------
    mu    = 0.125*x2/x4;
    sigma = mu/0.135;
    pif   = (-384.0*mu*mu + 134.0*mu);

    f << dot(x1) ==  mu*x1;
    f << dot(x2) == -sigma*x1 + u*Csin;
    f << dot(x3) ==  pif*x1;
    f << dot(x4) ==  u;
    f << dot(x5) ==  0.001*(u*u + 0.01*tf*tf);

    // DEFINE AN OPTIMAL CONTROL PROBLEM:
    // ----------------------------------
    OCP ocp( 0.0, tf, 50 );
    ocp.minimizeMayerTerm(0, 0.01*x5 -x3/tf             ); // Solve productivity optimal problem (Note: - due to maximization, small regularisation term)
    ocp.minimizeMayerTerm(1, 0.01*x5 -x3/(Csin*(x4-5.0))); // Solve yield optimal problem (Note: Csin = x2(t=0)/x4(t=0); - due to maximization, small regularisation term)

    ocp.subjectTo( f );

    ocp.subjectTo( AT_START, x1 ==   0.1           );
    ocp.subjectTo( AT_START, x2 ==  14.0           );
    ocp.subjectTo( AT_START, x3 ==   0.0           );
    ocp.subjectTo( AT_START, x4 ==   5.0           );
    ocp.subjectTo( AT_START, x5 ==   0.0           );
    ocp.subjectTo( AT_END,   x4 >=   5.0+20.0/Csin );

    ocp.subjectTo(  0.0 <= x1 <=   15.0  );
    ocp.subjectTo(  0.0 <= x2 <=   30.0  );
    ocp.subjectTo( -0.1 <= x3 <= 1000.0  );
    ocp.subjectTo(  5.0 <= x4 <=   20.0  );
    ocp.subjectTo( 20.0 <= tf <=   40.0  );
    ocp.subjectTo(  0.0 <= u  <=    2.0  );


    // DEFINE A MULTI-OBJECTIVE ALGORITHM AND SOLVE THE OCP:
    // -----------------------------------------------------
    MultiObjectiveAlgorithm algorithm(ocp);

    algorithm.set( PARETO_FRONT_DISCRETIZATION, 41                               );
    algorithm.set( PARETO_FRONT_GENERATION    , PFG_NORMALIZED_NORMAL_CONSTRAINT );
    algorithm.set( HESSIAN_APPROXIMATION      , EXACT_HESSIAN                    );
    //algorithm.set( DISCRETIZATION_TYPE        , SINGLE_SHOOTING                  );
    //algorithm.set( PARETO_FRONT_HOTSTART      , BT_FALSE                         );
    algorithm.set( KKT_TOLERANCE, 1e-8                                           );

    // Minimize individual objective function
    algorithm.solveSingleObjective(1);

    // Minimize individual objective function
    algorithm.solveSingleObjective(0);

    // Generate Pareto set
    algorithm.set( KKT_TOLERANCE, 5.0e-6 );
    algorithm.solve();

    algorithm.getWeights("fed_batch_bioreactor2_nnc_weights.txt"); 
    algorithm.getAllDifferentialStates("fed_batch_bioreactor2_nnc_states.txt");
    algorithm.getAllControls("fed_batch_bioreactor2_nnc_controls.txt");
    algorithm.getAllParameters("fed_batch_bioreactor2_nnc_parameters.txt");


    // VISUALIZE THE RESULTS IN A GNUPLOT WINDOW:
    // ------------------------------------------
    VariablesGrid paretoFront;
    algorithm.getParetoFront( paretoFront );

    GnuplotWindow window1;
    window1.addSubplot( paretoFront, "Pareto Front (yield versus productivity)", "-PRODUCTIVTY", "-YIELD", PM_POINTS );
    window1.plot( );


    // PRINT INFORMATION ABOUT THE ALGORITHM:
    // --------------------------------------
    algorithm.printInfo();


    // SAVE INFORMATION:
    // -----------------
    paretoFront.print();

    return 0;
}