Go to the source code of this file.
Classes | |
| struct | MessageHandling |
| Handles all kind of error messages, warnings and other information. More... | |
| struct | MessageHandling::ReturnValueList |
| Data structure for entries in global message list. More... | |
Macros | |
| #define | __FILE__ 0 |
| #define | __FUNCTION__ 0 |
| #define | __LINE__ 0 |
| #define | myFILE int |
| #define | myStderr 0 |
| #define | myStdout 0 |
| #define | THROWERROR(retval) ( getGlobalMessageHandler( )->throwError((retval),0,__FUNCTION__,__FILE__,__LINE__,VS_VISIBLE) ) |
| #define | THROWINFO(retval) ( getGlobalMessageHandler( )->throwInfo((retval),0,__FUNCTION__,__FILE__,__LINE__,VS_VISIBLE) ) |
| #define | THROWWARNING(retval) ( getGlobalMessageHandler( )->throwWarning((retval),0,__FUNCTION__,__FILE__,__LINE__,VS_VISIBLE) ) |
Functions | |
| MessageHandling * | getGlobalMessageHandler () |
Macro Definition Documentation
| #define __FILE__ 0 |
Ensures that FILE macro is defined.
Definition at line 383 of file external_packages/qpoases/INCLUDE/MessageHandling.hpp.
| #define __FUNCTION__ 0 |
Ensures that FUNCTION macro is defined.
Definition at line 378 of file external_packages/qpoases/INCLUDE/MessageHandling.hpp.
| #define __LINE__ 0 |
Ensures that LINE macro is defined.
Definition at line 388 of file external_packages/qpoases/INCLUDE/MessageHandling.hpp.
| #define myFILE int |
Defines an alias for FILE from stdio.h.
Definition at line 50 of file external_packages/qpoases/INCLUDE/MessageHandling.hpp.
| #define myStderr 0 |
Defines an alias for stderr from stdio.h.
Definition at line 52 of file external_packages/qpoases/INCLUDE/MessageHandling.hpp.
| #define myStdout 0 |
Defines an alias for stdout from stdio.h.
Definition at line 54 of file external_packages/qpoases/INCLUDE/MessageHandling.hpp.
| #define THROWERROR | ( | retval | ) | ( getGlobalMessageHandler( )->throwError((retval),0,__FUNCTION__,__FILE__,__LINE__,VS_VISIBLE) ) |
Short version of throwError with default values, only returnValue is needed
Definition at line 393 of file external_packages/qpoases/INCLUDE/MessageHandling.hpp.
| #define THROWINFO | ( | retval | ) | ( getGlobalMessageHandler( )->throwInfo((retval),0,__FUNCTION__,__FILE__,__LINE__,VS_VISIBLE) ) |
Short version of throwInfo with default values, only returnValue is needed
Definition at line 399 of file external_packages/qpoases/INCLUDE/MessageHandling.hpp.
| #define THROWWARNING | ( | retval | ) | ( getGlobalMessageHandler( )->throwWarning((retval),0,__FUNCTION__,__FILE__,__LINE__,VS_VISIBLE) ) |
Short version of throwWarning with default values, only returnValue is needed
Definition at line 396 of file external_packages/qpoases/INCLUDE/MessageHandling.hpp.
Enumeration Type Documentation
| enum returnValue |
Defines symbols for global return values.
Important: All return values are assumed to be nonnegative!
| Enumerator | |
|---|---|
| TERMINAL_LIST_ELEMENT |
Terminal list element, internal usage only! |
| SUCCESSFUL_RETURN |
Successful return. |
| RET_DIV_BY_ZERO |
Division by zero. |
| RET_INDEX_OUT_OF_BOUNDS |
Index out of bounds. |
| RET_INVALID_ARGUMENTS |
At least one of the arguments is invalid. |
| RET_ERROR_UNDEFINED |
Error number undefined. |
| RET_WARNING_UNDEFINED |
Warning number undefined. |
| RET_INFO_UNDEFINED |
Info number undefined. |
| RET_EWI_UNDEFINED |
Error/warning/info number undefined. |
| RET_AVAILABLE_WITH_LINUX_ONLY |
This function is available under Linux only. |
| RET_UNKNOWN_BUG |
The error occured is not yet known. |
| RET_PRINTLEVEL_CHANGED |
10 Print level changed. |
| RET_NOT_YET_IMPLEMENTED |
Requested function is not yet implemented in this version of qpOASES. |
| RET_INDEXLIST_MUST_BE_REORDERD |
Index list has to be reordered. |
| RET_INDEXLIST_EXCEEDS_MAX_LENGTH |
Index list exceeds its maximal physical length. |
| RET_INDEXLIST_CORRUPTED |
Index list corrupted. |
| RET_INDEXLIST_OUTOFBOUNDS |
Physical index is out of bounds. |
| RET_INDEXLIST_ADD_FAILED |
Adding indices from another index set failed. |
| RET_INDEXLIST_INTERSECT_FAILED |
Intersection with another index set failed. |
| RET_INDEX_ALREADY_OF_DESIRED_STATUS |
Index is already of desired status. |
| RET_ADDINDEX_FAILED |
Cannot swap between different indexsets. |
| RET_SWAPINDEX_FAILED |
20 Adding index to index set failed. |
| RET_NOTHING_TO_DO |
Nothing to do. |
| RET_SETUP_BOUND_FAILED |
Setting up bound index failed. |
| RET_SETUP_CONSTRAINT_FAILED |
Setting up constraint index failed. |
| RET_MOVING_BOUND_FAILED |
Moving bound between index sets failed. |
| RET_MOVING_CONSTRAINT_FAILED |
Moving constraint between index sets failed. |
| RET_QP_ALREADY_INITIALISED |
QProblem has already been initialised. |
| RET_NO_INIT_WITH_STANDARD_SOLVER |
Initialisation via extern QP solver is not yet implemented. |
| RET_RESET_FAILED |
Reset failed. |
| RET_INIT_FAILED |
Initialisation failed. |
| RET_INIT_FAILED_TQ |
30 Initialisation failed due to TQ factorisation. |
| RET_INIT_FAILED_CHOLESKY |
Initialisation failed due to Cholesky decomposition. |
| RET_INIT_FAILED_HOTSTART |
Initialisation failed! QP could not be solved! |
| RET_INIT_FAILED_INFEASIBILITY |
Initial QP could not be solved due to infeasibility! |
| RET_INIT_FAILED_UNBOUNDEDNESS |
Initial QP could not be solved due to unboundedness! |
| RET_INIT_SUCCESSFUL |
Initialisation done. |
| RET_OBTAINING_WORKINGSET_FAILED |
Failed to obtain working set for auxiliary QP. |
| RET_SETUP_WORKINGSET_FAILED |
Failed to setup working set for auxiliary QP. |
| RET_SETUP_AUXILIARYQP_FAILED |
Failed to setup auxiliary QP for initialised homotopy. |
| RET_NO_EXTERN_SOLVER |
No extern QP solver available. |
| RET_QP_UNBOUNDED |
40 QP is unbounded. |
| RET_QP_INFEASIBLE |
QP is infeasible. |
| RET_QP_NOT_SOLVED |
Problems occured while solving QP with standard solver. |
| RET_QP_SOLVED |
QP successfully solved. |
| RET_UNABLE_TO_SOLVE_QP |
Problems occured while solving QP. |
| RET_INITIALISATION_STARTED |
Starting problem initialisation. |
| RET_HOTSTART_FAILED |
Unable to perform homotopy due to internal error. |
| RET_HOTSTART_FAILED_TO_INIT |
Unable to initialise problem. |
| RET_HOTSTART_FAILED_AS_QP_NOT_INITIALISED |
Unable to perform homotopy as previous QP is not solved. |
| RET_ITERATION_STARTED |
Iteration... |
| RET_SHIFT_DETERMINATION_FAILED |
50 Determination of shift of the QP data failed. |
| RET_STEPDIRECTION_DETERMINATION_FAILED |
Determination of step direction failed. |
| RET_STEPLENGTH_DETERMINATION_FAILED |
Determination of step direction failed. |
| RET_OPTIMAL_SOLUTION_FOUND |
Optimal solution of neighbouring QP found. |
| RET_HOMOTOPY_STEP_FAILED |
Unable to perform homotopy step. |
| RET_HOTSTART_STOPPED_INFEASIBILITY |
Premature homotopy termination because QP is infeasible. |
| RET_HOTSTART_STOPPED_UNBOUNDEDNESS |
Premature homotopy termination because QP is unbounded. |
| RET_WORKINGSET_UPDATE_FAILED |
Unable to update working sets according to initial guesses. |
| RET_MAX_NWSR_REACHED |
Maximum number of working set recalculations performed. |
| RET_CONSTRAINTS_NOT_SPECIFIED |
Problem does comprise constraints! You also have to specify new constraints' bounds. |
| RET_INVALID_FACTORISATION_FLAG |
60 Invalid factorisation flag. |
| RET_UNABLE_TO_SAVE_QPDATA |
Unable to save QP data. |
| RET_STEPDIRECTION_FAILED_TQ |
Abnormal termination due to TQ factorisation. |
| RET_STEPDIRECTION_FAILED_CHOLESKY |
Abnormal termination due to Cholesky factorisation. |
| RET_CYCLING_DETECTED |
Cycling detected. |
| RET_CYCLING_NOT_RESOLVED |
Cycling cannot be resolved, QP probably infeasible. |
| RET_CYCLING_RESOLVED |
Cycling probably resolved. |
| RET_STEPSIZE |
For displaying performed stepsize. |
| RET_STEPSIZE_NONPOSITIVE |
For displaying non-positive stepsize. |
| RET_SETUPSUBJECTTOTYPE_FAILED |
Setup of SubjectToTypes failed. |
| RET_ADDCONSTRAINT_FAILED |
70 Addition of constraint to working set failed. |
| RET_ADDCONSTRAINT_FAILED_INFEASIBILITY |
Addition of constraint to working set failed (due to QP infeasibility). |
| RET_ADDBOUND_FAILED |
Addition of bound to working set failed. |
| RET_ADDBOUND_FAILED_INFEASIBILITY |
Addition of bound to working set failed (due to QP infeasibility). |
| RET_REMOVECONSTRAINT_FAILED |
Removal of constraint from working set failed. |
| RET_REMOVEBOUND_FAILED |
Removal of bound from working set failed. |
| RET_REMOVE_FROM_ACTIVESET |
Removing from active set... |
| RET_ADD_TO_ACTIVESET |
Adding to active set... |
| RET_REMOVE_FROM_ACTIVESET_FAILED |
Removing from active set failed. |
| RET_ADD_TO_ACTIVESET_FAILED |
Adding to active set failed. |
| RET_CONSTRAINT_ALREADY_ACTIVE |
80 Constraint is already active. |
| RET_ALL_CONSTRAINTS_ACTIVE |
All constraints are active, no further constraint can be added. |
| RET_LINEARLY_DEPENDENT |
New bound/constraint is linearly dependent. |
| RET_LINEARLY_INDEPENDENT |
New bound/constraint is linearly independent. |
| RET_LI_RESOLVED |
Linear independence of active contraint matrix successfully resolved. |
| RET_ENSURELI_FAILED |
Failed to ensure linear indepence of active contraint matrix. |
| RET_ENSURELI_FAILED_TQ |
Abnormal termination due to TQ factorisation. |
| RET_ENSURELI_FAILED_NOINDEX |
No index found, QP probably infeasible. |
| RET_ENSURELI_FAILED_CYCLING |
Cycling detected, QP probably infeasible. |
| RET_BOUND_ALREADY_ACTIVE |
Bound is already active. |
| RET_ALL_BOUNDS_ACTIVE |
90 All bounds are active, no further bound can be added. |
| RET_CONSTRAINT_NOT_ACTIVE |
Constraint is not active. |
| RET_BOUND_NOT_ACTIVE |
Bound is not active. |
| RET_HESSIAN_NOT_SPD |
Projected Hessian matrix not positive definite. |
| RET_MATRIX_SHIFT_FAILED |
Unable to update matrices or to transform vectors. |
| RET_MATRIX_FACTORISATION_FAILED |
Unable to calculate new matrix factorisations. |
| RET_PRINT_ITERATION_FAILED |
Unable to print information on current iteration. |
| RET_NO_GLOBAL_MESSAGE_OUTPUTFILE |
No global message output file initialised. |
| RET_UNABLE_TO_OPEN_FILE |
Unable to open file. |
| RET_UNABLE_TO_WRITE_FILE |
Unable to write into file. |
| RET_UNABLE_TO_READ_FILE |
100 Unable to read from file. |
| RET_FILEDATA_INCONSISTENT |
File contains inconsistent data. |
| RET_NO_SOLUTION |
QP solution does not satisfy KKT optimality conditions. |
| RET_INACCURATE_SOLUTION |
KKT optimality conditions not satisfied to sufficient accuracy. |
| TERMINAL_LIST_ELEMENT |
Terminal list element, internal usage only! |
| SUCCESSFUL_RETURN |
Successful return. |
| RET_DIV_BY_ZERO |
Division by zero. |
| RET_INDEX_OUT_OF_BOUNDS |
Index out of bounds. |
| RET_INVALID_ARGUMENTS |
At least one of the arguments is invalid. |
| RET_ERROR_UNDEFINED |
Error number undefined. |
| RET_WARNING_UNDEFINED |
Warning number undefined. |
| RET_INFO_UNDEFINED |
Info number undefined. |
| RET_EWI_UNDEFINED |
Error/warning/info number undefined. |
| RET_AVAILABLE_WITH_LINUX_ONLY |
This function is available under Linux only. |
| RET_UNKNOWN_BUG |
The error occured is not yet known. |
| RET_PRINTLEVEL_CHANGED |
10 Print level changed. |
| RET_NOT_YET_IMPLEMENTED |
Requested function is not yet implemented in this version of qpOASES. |
| RET_INDEXLIST_MUST_BE_REORDERD |
Index list has to be reordered. |
| RET_INDEXLIST_EXCEEDS_MAX_LENGTH |
Index list exceeds its maximal physical length. |
| RET_INDEXLIST_CORRUPTED |
Index list corrupted. |
| RET_INDEXLIST_OUTOFBOUNDS |
Physical index is out of bounds. |
| RET_INDEXLIST_ADD_FAILED |
Adding indices from another index set failed. |
| RET_INDEXLIST_INTERSECT_FAILED |
Intersection with another index set failed. |
| RET_INDEX_ALREADY_OF_DESIRED_STATUS |
Index is already of desired status. |
| RET_ADDINDEX_FAILED |
Cannot swap between different indexsets. |
| RET_SWAPINDEX_FAILED |
20 Adding index to index set failed. |
| RET_NOTHING_TO_DO |
Nothing to do. |
| RET_SETUP_BOUND_FAILED |
Setting up bound index failed. |
| RET_SETUP_CONSTRAINT_FAILED |
Setting up constraint index failed. |
| RET_MOVING_BOUND_FAILED |
Moving bound between index sets failed. |
| RET_MOVING_CONSTRAINT_FAILED |
Moving constraint between index sets failed. |
| RET_QP_ALREADY_INITIALISED |
QProblem has already been initialised. |
| RET_NO_INIT_WITH_STANDARD_SOLVER |
Initialisation via extern QP solver is not yet implemented. |
| RET_RESET_FAILED |
Reset failed. |
| RET_INIT_FAILED |
Initialisation failed. |
| RET_INIT_FAILED_TQ |
30 Initialisation failed due to TQ factorisation. |
| RET_INIT_FAILED_CHOLESKY |
Initialisation failed due to Cholesky decomposition. |
| RET_INIT_FAILED_HOTSTART |
Initialisation failed! QP could not be solved! |
| RET_INIT_FAILED_INFEASIBILITY |
Initial QP could not be solved due to infeasibility! |
| RET_INIT_FAILED_UNBOUNDEDNESS |
Initial QP could not be solved due to unboundedness! |
| RET_INIT_SUCCESSFUL |
Initialisation done. |
| RET_OBTAINING_WORKINGSET_FAILED |
Failed to obtain working set for auxiliary QP. |
| RET_SETUP_WORKINGSET_FAILED |
Failed to setup working set for auxiliary QP. |
| RET_SETUP_AUXILIARYQP_FAILED |
Failed to setup auxiliary QP for initialised homotopy. |
| RET_NO_EXTERN_SOLVER |
No extern QP solver available. |
| RET_QP_UNBOUNDED |
40 QP is unbounded. |
| RET_QP_INFEASIBLE |
QP is infeasible. |
| RET_QP_NOT_SOLVED |
Problems occured while solving QP with standard solver. |
| RET_QP_SOLVED |
QP successfully solved. |
| RET_UNABLE_TO_SOLVE_QP |
Problems occured while solving QP. |
| RET_INITIALISATION_STARTED |
Starting problem initialisation. |
| RET_HOTSTART_FAILED |
Unable to perform homotopy due to internal error. |
| RET_HOTSTART_FAILED_TO_INIT |
Unable to initialise problem. |
| RET_HOTSTART_FAILED_AS_QP_NOT_INITIALISED |
Unable to perform homotopy as previous QP is not solved. |
| RET_ITERATION_STARTED |
Iteration... |
| RET_SHIFT_DETERMINATION_FAILED |
50 Determination of shift of the QP data failed. |
| RET_STEPDIRECTION_DETERMINATION_FAILED |
Determination of step direction failed. |
| RET_STEPLENGTH_DETERMINATION_FAILED |
Determination of step direction failed. |
| RET_OPTIMAL_SOLUTION_FOUND |
Optimal solution of neighbouring QP found. |
| RET_HOMOTOPY_STEP_FAILED |
Unable to perform homotopy step. |
| RET_HOTSTART_STOPPED_INFEASIBILITY |
Premature homotopy termination because QP is infeasible. |
| RET_HOTSTART_STOPPED_UNBOUNDEDNESS |
Premature homotopy termination because QP is unbounded. |
| RET_WORKINGSET_UPDATE_FAILED |
Unable to update working sets according to initial guesses. |
| RET_MAX_NWSR_REACHED |
Maximum number of working set recalculations performed. |
| RET_CONSTRAINTS_NOT_SPECIFIED |
Problem does comprise constraints! You also have to specify new constraints' bounds. |
| RET_INVALID_FACTORISATION_FLAG |
60 Invalid factorisation flag. |
| RET_UNABLE_TO_SAVE_QPDATA |
Unable to save QP data. |
| RET_STEPDIRECTION_FAILED_TQ |
Abnormal termination due to TQ factorisation. |
| RET_STEPDIRECTION_FAILED_CHOLESKY |
Abnormal termination due to Cholesky factorisation. |
| RET_CYCLING_DETECTED |
Cycling detected. |
| RET_CYCLING_NOT_RESOLVED |
Cycling cannot be resolved, QP probably infeasible. |
| RET_CYCLING_RESOLVED |
Cycling probably resolved. |
| RET_STEPSIZE |
For displaying performed stepsize. |
| RET_STEPSIZE_NONPOSITIVE |
For displaying non-positive stepsize. |
| RET_SETUPSUBJECTTOTYPE_FAILED |
Setup of SubjectToTypes failed. |
| RET_ADDCONSTRAINT_FAILED |
70 Addition of constraint to working set failed. |
| RET_ADDCONSTRAINT_FAILED_INFEASIBILITY |
Addition of constraint to working set failed (due to QP infeasibility). |
| RET_ADDBOUND_FAILED |
Addition of bound to working set failed. |
| RET_ADDBOUND_FAILED_INFEASIBILITY |
Addition of bound to working set failed (due to QP infeasibility). |
| RET_REMOVECONSTRAINT_FAILED |
Removal of constraint from working set failed. |
| RET_REMOVEBOUND_FAILED |
Removal of bound from working set failed. |
| RET_REMOVE_FROM_ACTIVESET |
Removing from active set... |
| RET_ADD_TO_ACTIVESET |
Adding to active set... |
| RET_REMOVE_FROM_ACTIVESET_FAILED |
Removing from active set failed. |
| RET_ADD_TO_ACTIVESET_FAILED |
Adding to active set failed. |
| RET_CONSTRAINT_ALREADY_ACTIVE |
80 Constraint is already active. |
| RET_ALL_CONSTRAINTS_ACTIVE |
All constraints are active, no further constraint can be added. |
| RET_LINEARLY_DEPENDENT |
New bound/constraint is linearly dependent. |
| RET_LINEARLY_INDEPENDENT |
New bound/constraint is linearly independent. |
| RET_LI_RESOLVED |
Linear independence of active contraint matrix successfully resolved. |
| RET_ENSURELI_FAILED |
Failed to ensure linear indepence of active contraint matrix. |
| RET_ENSURELI_FAILED_TQ |
Abnormal termination due to TQ factorisation. |
| RET_ENSURELI_FAILED_NOINDEX |
No index found, QP probably infeasible. |
| RET_ENSURELI_FAILED_CYCLING |
Cycling detected, QP probably infeasible. |
| RET_BOUND_ALREADY_ACTIVE |
Bound is already active. |
| RET_ALL_BOUNDS_ACTIVE |
90 All bounds are active, no further bound can be added. |
| RET_CONSTRAINT_NOT_ACTIVE |
Constraint is not active. |
| RET_BOUND_NOT_ACTIVE |
Bound is not active. |
| RET_HESSIAN_NOT_SPD |
Projected Hessian matrix not positive definite. |
| RET_MATRIX_SHIFT_FAILED |
Unable to update matrices or to transform vectors. |
| RET_MATRIX_FACTORISATION_FAILED |
Unable to calculate new matrix factorisations. |
| RET_PRINT_ITERATION_FAILED |
Unable to print information on current iteration. |
| RET_NO_GLOBAL_MESSAGE_OUTPUTFILE |
No global message output file initialised. |
| RET_UNABLE_TO_OPEN_FILE |
Unable to open file. |
| RET_UNABLE_TO_WRITE_FILE |
Unable to write into file. |
| RET_UNABLE_TO_READ_FILE |
100 Unable to read from file. |
| RET_FILEDATA_INCONSISTENT |
File contains inconsistent data. |
| RET_NO_SOLUTION |
QP solution does not satisfy KKT optimality conditions. |
| RET_INACCURATE_SOLUTION |
KKT optimality conditions not satisfied to sufficient accuracy. |
| TERMINAL_LIST_ELEMENT |
Terminal list element, internal usage only! |
| SUCCESSFUL_RETURN |
Successful return. |
| RET_DIV_BY_ZERO |
Division by zero. |
| RET_INDEX_OUT_OF_BOUNDS |
Index out of bounds. |
| RET_INVALID_ARGUMENTS |
At least one of the arguments is invalid. |
| RET_ERROR_UNDEFINED |
Error number undefined. |
| RET_WARNING_UNDEFINED |
Warning number undefined. |
| RET_INFO_UNDEFINED |
Info number undefined. |
| RET_EWI_UNDEFINED |
Error/warning/info number undefined. |
| RET_AVAILABLE_WITH_LINUX_ONLY |
This function is available under Linux only. |
| RET_UNKNOWN_BUG |
The error occured is not yet known. |
| RET_PRINTLEVEL_CHANGED |
Print level changed. |
| RET_NOT_YET_IMPLEMENTED |
Requested function is not yet implemented in this version of qpOASES. |
| RET_INDEXLIST_MUST_BE_REORDERD |
Index list has to be reordered. (12) |
| RET_INDEXLIST_EXCEEDS_MAX_LENGTH |
Index list exceeds its maximal physical length. |
| RET_INDEXLIST_CORRUPTED |
Index list corrupted. |
| RET_INDEXLIST_OUTOFBOUNDS |
Physical index is out of bounds. |
| RET_INDEXLIST_ADD_FAILED |
Adding indices from another index set failed. |
| RET_INDEXLIST_INTERSECT_FAILED |
Intersection with another index set failed. |
| RET_INDEX_ALREADY_OF_DESIRED_STATUS |
Index is already of desired status. (18) |
| RET_ADDINDEX_FAILED |
Adding index to index set failed. |
| RET_REMOVEINDEX_FAILED |
Removing index from index set failed. |
| RET_SWAPINDEX_FAILED |
Cannot swap between different indexsets. |
| RET_NOTHING_TO_DO |
Nothing to do. |
| RET_SETUP_BOUND_FAILED |
Setting up bound index failed. |
| RET_SETUP_CONSTRAINT_FAILED |
Setting up constraint index failed. |
| RET_MOVING_BOUND_FAILED |
Moving bound between index sets failed. |
| RET_MOVING_CONSTRAINT_FAILED |
Moving constraint between index sets failed. |
| RET_SHIFTING_FAILED |
Shifting of bounds/constraints failed. |
| RET_ROTATING_FAILED |
Rotating of bounds/constraints failed. |
| RET_QPOBJECT_NOT_SETUP |
The QP object has not been setup correctly, use another constructor. (29) |
| RET_QP_ALREADY_INITIALISED |
QProblem has already been initialised. |
| RET_NO_INIT_WITH_STANDARD_SOLVER |
Initialisation via extern QP solver is not yet implemented. |
| RET_RESET_FAILED |
Reset failed. |
| RET_INIT_FAILED |
Initialisation failed. |
| RET_INIT_FAILED_TQ |
Initialisation failed due to TQ factorisation. |
| RET_INIT_FAILED_CHOLESKY |
Initialisation failed due to Cholesky decomposition. |
| RET_INIT_FAILED_HOTSTART |
Initialisation failed! QP could not be solved! |
| RET_INIT_FAILED_INFEASIBILITY |
Initial QP could not be solved due to infeasibility! |
| RET_INIT_FAILED_UNBOUNDEDNESS |
Initial QP could not be solved due to unboundedness! |
| RET_INIT_FAILED_REGULARISATION |
Initialisation failed as Hessian matrix could not be regularised. |
| RET_INIT_SUCCESSFUL |
Initialisation done. |
| RET_OBTAINING_WORKINGSET_FAILED |
Failed to obtain working set for auxiliary QP. (40) |
| RET_SETUP_WORKINGSET_FAILED |
Failed to setup working set for auxiliary QP. |
| RET_SETUP_AUXILIARYQP_FAILED |
Failed to setup auxiliary QP for initialised homotopy. |
| RET_NO_EXTERN_SOLVER |
No extern QP solver available. |
| RET_QP_UNBOUNDED |
QP is unbounded. |
| RET_QP_INFEASIBLE |
QP is infeasible. |
| RET_QP_NOT_SOLVED |
Problems occured while solving QP with standard solver. |
| RET_QP_SOLVED |
QP successfully solved. |
| RET_UNABLE_TO_SOLVE_QP |
Problems occured while solving QP. |
| RET_INITIALISATION_STARTED |
Starting problem initialisation. |
| RET_HOTSTART_FAILED |
Unable to perform homotopy due to internal error. (50) |
| RET_HOTSTART_FAILED_TO_INIT |
Unable to initialise problem. |
| RET_HOTSTART_FAILED_AS_QP_NOT_INITIALISED |
Unable to perform homotopy as previous QP is not solved. |
| RET_ITERATION_STARTED |
Iteration... |
| RET_SHIFT_DETERMINATION_FAILED |
Determination of shift of the QP data failed. |
| RET_STEPDIRECTION_DETERMINATION_FAILED |
Determination of step direction failed. |
| RET_STEPLENGTH_DETERMINATION_FAILED |
Determination of step direction failed. |
| RET_OPTIMAL_SOLUTION_FOUND |
Optimal solution of neighbouring QP found. |
| RET_HOMOTOPY_STEP_FAILED |
Unable to perform homotopy step. |
| RET_HOTSTART_STOPPED_INFEASIBILITY |
Premature homotopy termination because QP is infeasible. |
| RET_HOTSTART_STOPPED_UNBOUNDEDNESS |
Premature homotopy termination because QP is unbounded. (60) |
| RET_WORKINGSET_UPDATE_FAILED |
Unable to update working sets according to initial guesses. |
| RET_MAX_NWSR_REACHED |
Maximum number of working set recalculations performed. |
| RET_CONSTRAINTS_NOT_SPECIFIED |
Problem does comprise constraints! You also have to specify new constraints' bounds. |
| RET_INVALID_FACTORISATION_FLAG |
Invalid factorisation flag. |
| RET_UNABLE_TO_SAVE_QPDATA |
Unable to save QP data. |
| RET_STEPDIRECTION_FAILED_TQ |
Abnormal termination due to TQ factorisation. |
| RET_STEPDIRECTION_FAILED_CHOLESKY |
Abnormal termination due to Cholesky factorisation. |
| RET_CYCLING_DETECTED |
Cycling detected. |
| RET_CYCLING_NOT_RESOLVED |
Cycling cannot be resolved, QP probably infeasible. |
| RET_CYCLING_RESOLVED |
Cycling probably resolved. (70) |
| RET_STEPSIZE |
For displaying performed stepsize. |
| RET_STEPSIZE_NONPOSITIVE |
For displaying non-positive stepsize. |
| RET_SETUPSUBJECTTOTYPE_FAILED |
Setup of SubjectToTypes failed. |
| RET_ADDCONSTRAINT_FAILED |
Addition of constraint to working set failed. |
| RET_ADDCONSTRAINT_FAILED_INFEASIBILITY |
Addition of constraint to working set failed (due to QP infeasibility). |
| RET_ADDBOUND_FAILED |
Addition of bound to working set failed. |
| RET_ADDBOUND_FAILED_INFEASIBILITY |
Addition of bound to working set failed (due to QP infeasibility). |
| RET_REMOVECONSTRAINT_FAILED |
Removal of constraint from working set failed. |
| RET_REMOVEBOUND_FAILED |
Removal of bound from working set failed. |
| RET_REMOVE_FROM_ACTIVESET |
Removing from active set... (80) |
| RET_ADD_TO_ACTIVESET |
Adding to active set... |
| RET_REMOVE_FROM_ACTIVESET_FAILED |
Removing from active set failed. |
| RET_ADD_TO_ACTIVESET_FAILED |
Adding to active set failed. |
| RET_CONSTRAINT_ALREADY_ACTIVE |
Constraint is already active. |
| RET_ALL_CONSTRAINTS_ACTIVE |
All constraints are active, no further constraint can be added. |
| RET_LINEARLY_DEPENDENT |
New bound/constraint is linearly dependent. |
| RET_LINEARLY_INDEPENDENT |
New bound/constraint is linearly independent. |
| RET_LI_RESOLVED |
Linear indepence of active contraint matrix successfully resolved. |
| RET_ENSURELI_FAILED |
Failed to ensure linear indepence of active contraint matrix. |
| RET_ENSURELI_FAILED_TQ |
Abnormal termination due to TQ factorisation. (90) |
| RET_ENSURELI_FAILED_NOINDEX |
QP is infeasible. |
| RET_ENSURELI_FAILED_CYCLING |
QP is infeasible. |
| RET_BOUND_ALREADY_ACTIVE |
Bound is already active. |
| RET_ALL_BOUNDS_ACTIVE |
All bounds are active, no further bound can be added. |
| RET_CONSTRAINT_NOT_ACTIVE |
Constraint is not active. |
| RET_BOUND_NOT_ACTIVE |
Bound is not active. |
| RET_HESSIAN_NOT_SPD |
Projected Hessian matrix not positive definite. |
| RET_HESSIAN_INDEFINITE |
Hessian matrix is indefinite. |
| RET_MATRIX_SHIFT_FAILED |
Unable to update matrices or to transform vectors. |
| RET_MATRIX_FACTORISATION_FAILED |
Unable to calculate new matrix factorisations. (100) |
| RET_PRINT_ITERATION_FAILED |
Unable to print information on current iteration. |
| RET_NO_GLOBAL_MESSAGE_OUTPUTFILE |
No global message output file initialised. |
| RET_DISABLECONSTRAINTS_FAILED |
Unable to disbable constraints. |
| RET_ENABLECONSTRAINTS_FAILED |
Unable to enbable constraints. |
| RET_ALREADY_ENABLED |
Bound or constraint is already enabled. |
| RET_ALREADY_DISABLED |
Bound or constraint is already disabled. |
| RET_NO_HESSIAN_SPECIFIED |
No Hessian matrix has been specified. |
| RET_USING_REGULARISATION |
Using regularisation as Hessian matrix is not positive definite. |
| RET_EPS_MUST_BE_POSITVE |
Eps for regularisation must be sufficiently positive. |
| RET_REGSTEPS_MUST_BE_POSITVE |
Maximum number of regularisation steps must be non-negative. (110) |
| RET_HESSIAN_ALREADY_REGULARISED |
Hessian has been already regularised. |
| RET_CANNOT_REGULARISE_IDENTITY |
Identity Hessian matrix cannot be regularised. |
| RET_CANNOT_REGULARISE_SPARSE |
Sparse matrix cannot be regularised as diagonal entry is missing. |
| RET_NO_REGSTEP_NWSR |
No additional regularisation step could be performed due to limits. |
| RET_FEWER_REGSTEPS_NWSR |
Fewer additional regularisation steps have been performed due to limits. |
| RET_CHOLESKY_OF_ZERO_HESSIAN |
Cholesky decomposition of (unregularised) zero Hessian matrix. |
| RET_CONSTRAINTS_ARE_NOT_SCALED |
When defining MANY_CONSTRAINTS, l1 norm of each constraint must be not greater than one. |
| RET_ERROR_IN_CONSTRAINTPRODUCT |
Error in user-defined constraint product function. |
| RET_UPDATEMATRICES_FAILED |
Unable to update QP matrices. |
| RET_UPDATEMATRICES_FAILED_AS_QP_NOT_SOLVED |
Unable to update matrices as previous QP is not solved. |
| RET_UNABLE_TO_OPEN_FILE |
Unable to open file. (120) |
| RET_UNABLE_TO_WRITE_FILE |
Unable to write into file. |
| RET_UNABLE_TO_READ_FILE |
Unable to read from file. |
| RET_FILEDATA_INCONSISTENT |
File contains inconsistent data. |
| RET_UNABLE_TO_ANALYSE_QPROBLEM |
Unable to analyse (S)QProblem(B) object. |
| RET_NWSR_SET_TO_ONE |
Maximum number of working set changes was set to 1. |
| RET_UNABLE_TO_READ_BENCHMARK |
Unable to read benchmark data. |
| RET_BENCHMARK_ABORTED |
Benchmark aborted. |
| RET_INITIAL_QP_SOLVED |
Initial QP solved. |
| RET_QP_SOLUTION_STARTED |
Solving QP... |
| RET_BENCHMARK_SUCCESSFUL |
Benchmark terminated successfully. (130) |
| RET_NO_DIAGONAL_AVAILABLE |
Sparse matrix does not have entries on full diagonal. |
| TERMINAL_LIST_ELEMENT |
Terminal list element, internal usage only! |
| SUCCESSFUL_RETURN |
Successful return. |
| RET_DIV_BY_ZERO |
Division by zero. |
| RET_INDEX_OUT_OF_BOUNDS |
Index out of bounds. |
| RET_INVALID_ARGUMENTS |
At least one of the arguments is invalid. |
| RET_ERROR_UNDEFINED |
Error number undefined. |
| RET_WARNING_UNDEFINED |
Warning number undefined. |
| RET_INFO_UNDEFINED |
Info number undefined. |
| RET_EWI_UNDEFINED |
Error/warning/info number undefined. |
| RET_AVAILABLE_WITH_LINUX_ONLY |
This function is available under Linux only. |
| RET_UNKNOWN_BUG |
The error occurred is not yet known. |
| RET_PRINTLEVEL_CHANGED |
Print level changed. (10) |
| RET_NOT_YET_IMPLEMENTED |
Requested function is not yet implemented in this version of qpOASES. |
| RET_INDEXLIST_MUST_BE_REORDERD |
Index list has to be reordered. |
| RET_INDEXLIST_EXCEEDS_MAX_LENGTH |
Index list exceeds its maximal physical length. |
| RET_INDEXLIST_CORRUPTED |
Index list corrupted. |
| RET_INDEXLIST_OUTOFBOUNDS |
Physical index is out of bounds. |
| RET_INDEXLIST_ADD_FAILED |
Adding indices from another index set failed. |
| RET_INDEXLIST_INTERSECT_FAILED |
Intersection with another index set failed. |
| RET_INDEX_ALREADY_OF_DESIRED_STATUS |
Index is already of desired status. (18) |
| RET_ADDINDEX_FAILED |
Adding index to index set failed. |
| RET_REMOVEINDEX_FAILED |
Removing index from index set failed. (20) |
| RET_SWAPINDEX_FAILED |
Cannot swap between different indexsets. |
| RET_NOTHING_TO_DO |
Nothing to do. |
| RET_SETUP_BOUND_FAILED |
Setting up bound index failed. |
| RET_SETUP_CONSTRAINT_FAILED |
Setting up constraint index failed. |
| RET_MOVING_BOUND_FAILED |
Moving bound between index sets failed. |
| RET_MOVING_CONSTRAINT_FAILED |
Moving constraint between index sets failed. |
| RET_SHIFTING_FAILED |
Shifting of bounds/constraints failed. |
| RET_ROTATING_FAILED |
Rotating of bounds/constraints failed. |
| RET_QPOBJECT_NOT_SETUP |
The QP object has not been setup correctly, use another constructor. |
| RET_QP_ALREADY_INITIALISED |
QProblem has already been initialised. (30) |
| RET_NO_INIT_WITH_STANDARD_SOLVER |
Initialisation via extern QP solver is not yet implemented. |
| RET_RESET_FAILED |
Reset failed. |
| RET_INIT_FAILED |
Initialisation failed. |
| RET_INIT_FAILED_TQ |
Initialisation failed due to TQ factorisation. |
| RET_INIT_FAILED_CHOLESKY |
Initialisation failed due to Cholesky decomposition. |
| RET_INIT_FAILED_HOTSTART |
Initialisation failed! QP could not be solved! |
| RET_INIT_FAILED_INFEASIBILITY |
Initial QP could not be solved due to infeasibility! |
| RET_INIT_FAILED_UNBOUNDEDNESS |
Initial QP could not be solved due to unboundedness! |
| RET_INIT_FAILED_REGULARISATION |
Initialisation failed as Hessian matrix could not be regularised. |
| RET_INIT_SUCCESSFUL |
Initialisation done. (40) |
| RET_OBTAINING_WORKINGSET_FAILED |
Failed to obtain working set for auxiliary QP. |
| RET_SETUP_WORKINGSET_FAILED |
Failed to setup working set for auxiliary QP. |
| RET_SETUP_AUXILIARYQP_FAILED |
Failed to setup auxiliary QP for initialised homotopy. |
| RET_NO_CHOLESKY_WITH_INITIAL_GUESS |
Externally computed Cholesky factor cannot be combined with an initial guess. |
| RET_NO_EXTERN_SOLVER |
No extern QP solver available. |
| RET_QP_UNBOUNDED |
QP is unbounded. |
| RET_QP_INFEASIBLE |
QP is infeasible. |
| RET_QP_NOT_SOLVED |
Problems occurred while solving QP with standard solver. |
| RET_QP_SOLVED |
QP successfully solved. |
| RET_UNABLE_TO_SOLVE_QP |
Problems occurred while solving QP. (50) |
| RET_INITIALISATION_STARTED |
Starting problem initialisation... |
| RET_HOTSTART_FAILED |
Unable to perform homotopy due to internal error. |
| RET_HOTSTART_FAILED_TO_INIT |
Unable to initialise problem. |
| RET_HOTSTART_FAILED_AS_QP_NOT_INITIALISED |
Unable to perform homotopy as previous QP is not solved. |
| RET_ITERATION_STARTED |
Iteration... |
| RET_SHIFT_DETERMINATION_FAILED |
Determination of shift of the QP data failed. |
| RET_STEPDIRECTION_DETERMINATION_FAILED |
Determination of step direction failed. |
| RET_STEPLENGTH_DETERMINATION_FAILED |
Determination of step direction failed. |
| RET_OPTIMAL_SOLUTION_FOUND |
Optimal solution of neighbouring QP found. |
| RET_HOMOTOPY_STEP_FAILED |
Unable to perform homotopy step. (60) |
| RET_HOTSTART_STOPPED_INFEASIBILITY |
Premature homotopy termination because QP is infeasible. |
| RET_HOTSTART_STOPPED_UNBOUNDEDNESS |
Premature homotopy termination because QP is unbounded. |
| RET_WORKINGSET_UPDATE_FAILED |
Unable to update working sets according to initial guesses. |
| RET_MAX_NWSR_REACHED |
Maximum number of working set recalculations performed. |
| RET_CONSTRAINTS_NOT_SPECIFIED |
Problem does comprise constraints! You also have to specify new constraints' bounds. |
| RET_INVALID_FACTORISATION_FLAG |
Invalid factorisation flag. |
| RET_UNABLE_TO_SAVE_QPDATA |
Unable to save QP data. |
| RET_STEPDIRECTION_FAILED_TQ |
Abnormal termination due to TQ factorisation. |
| RET_STEPDIRECTION_FAILED_CHOLESKY |
Abnormal termination due to Cholesky factorisation. |
| RET_CYCLING_DETECTED |
Cycling detected. (70) |
| RET_CYCLING_NOT_RESOLVED |
Cycling cannot be resolved, QP probably infeasible. |
| RET_CYCLING_RESOLVED |
Cycling probably resolved. |
| RET_STEPSIZE |
For displaying performed stepsize. |
| RET_STEPSIZE_NONPOSITIVE |
For displaying non-positive stepsize. |
| RET_SETUPSUBJECTTOTYPE_FAILED |
Setup of SubjectToTypes failed. |
| RET_ADDCONSTRAINT_FAILED |
Addition of constraint to working set failed. |
| RET_ADDCONSTRAINT_FAILED_INFEASIBILITY |
Addition of constraint to working set failed (due to QP infeasibility). |
| RET_ADDBOUND_FAILED |
Addition of bound to working set failed. |
| RET_ADDBOUND_FAILED_INFEASIBILITY |
Addition of bound to working set failed (due to QP infeasibility). |
| RET_REMOVECONSTRAINT_FAILED |
Removal of constraint from working set failed. (80) |
| RET_REMOVEBOUND_FAILED |
Removal of bound from working set failed. |
| RET_REMOVE_FROM_ACTIVESET |
Removing from active set... |
| RET_ADD_TO_ACTIVESET |
Adding to active set... |
| RET_REMOVE_FROM_ACTIVESET_FAILED |
Removing from active set failed. |
| RET_ADD_TO_ACTIVESET_FAILED |
Adding to active set failed. |
| RET_CONSTRAINT_ALREADY_ACTIVE |
Constraint is already active. |
| RET_ALL_CONSTRAINTS_ACTIVE |
All constraints are active, no further constraint can be added. |
| RET_LINEARLY_DEPENDENT |
New bound/constraint is linearly dependent. |
| RET_LINEARLY_INDEPENDENT |
New bound/constraint is linearly independent. |
| RET_LI_RESOLVED |
Linear independence of active constraint matrix successfully resolved. (90) |
| RET_ENSURELI_FAILED |
Failed to ensure linear independence of active constraint matrix. |
| RET_ENSURELI_FAILED_TQ |
Abnormal termination due to TQ factorisation. |
| RET_ENSURELI_FAILED_NOINDEX |
QP is infeasible. |
| RET_ENSURELI_FAILED_CYCLING |
QP is infeasible. |
| RET_BOUND_ALREADY_ACTIVE |
Bound is already active. |
| RET_ALL_BOUNDS_ACTIVE |
All bounds are active, no further bound can be added. |
| RET_CONSTRAINT_NOT_ACTIVE |
Constraint is not active. |
| RET_BOUND_NOT_ACTIVE |
Bound is not active. |
| RET_HESSIAN_NOT_SPD |
Projected Hessian matrix not positive definite. |
| RET_HESSIAN_INDEFINITE |
Hessian matrix is indefinite. (100) |
| RET_MATRIX_SHIFT_FAILED |
Unable to update matrices or to transform vectors. |
| RET_MATRIX_FACTORISATION_FAILED |
Unable to calculate new matrix factorisations. |
| RET_PRINT_ITERATION_FAILED |
Unable to print information on current iteration. |
| RET_NO_GLOBAL_MESSAGE_OUTPUTFILE |
No global message output file initialised. |
| RET_DISABLECONSTRAINTS_FAILED |
Unable to disbable constraints. |
| RET_ENABLECONSTRAINTS_FAILED |
Unable to enbable constraints. |
| RET_ALREADY_ENABLED |
Bound or constraint is already enabled. |
| RET_ALREADY_DISABLED |
Bound or constraint is already disabled. |
| RET_NO_HESSIAN_SPECIFIED |
No Hessian matrix has been specified. |
| RET_USING_REGULARISATION |
Using regularisation as Hessian matrix is not positive definite. (110) |
| RET_EPS_MUST_BE_POSITVE |
Eps for regularisation must be sufficiently positive. |
| RET_REGSTEPS_MUST_BE_POSITVE |
Maximum number of regularisation steps must be non-negative. |
| RET_HESSIAN_ALREADY_REGULARISED |
Hessian has been already regularised. |
| RET_CANNOT_REGULARISE_IDENTITY |
Identity Hessian matrix cannot be regularised. |
| RET_CANNOT_REGULARISE_SPARSE |
Sparse matrix cannot be regularised as diagonal entry is missing. |
| RET_NO_REGSTEP_NWSR |
No additional regularisation step could be performed due to limits. |
| RET_FEWER_REGSTEPS_NWSR |
Fewer additional regularisation steps have been performed due to limits. |
| RET_CHOLESKY_OF_ZERO_HESSIAN |
Cholesky decomposition of (unregularised) zero Hessian matrix. |
| RET_ZERO_HESSIAN_ASSUMED |
Zero Hessian matrix assumed as null pointer passed without specifying hessianType. |
| RET_CONSTRAINTS_ARE_NOT_SCALED |
(no longer in use) (120) |
| RET_INITIAL_BOUNDS_STATUS_NYI |
(no longer in use) |
| RET_ERROR_IN_CONSTRAINTPRODUCT |
Error in user-defined constraint product function. |
| RET_FIX_BOUNDS_FOR_LP |
All initial bounds must be fixed when solving an (unregularised) LP. |
| RET_USE_REGULARISATION_FOR_LP |
Set options.enableRegularisation=BT_TRUE for solving LPs. |
| RET_UPDATEMATRICES_FAILED |
Unable to update QP matrices. |
| RET_UPDATEMATRICES_FAILED_AS_QP_NOT_SOLVED |
Unable to update matrices as previous QP is not solved. |
| RET_UNABLE_TO_OPEN_FILE |
Unable to open file. |
| RET_UNABLE_TO_WRITE_FILE |
Unable to write into file. |
| RET_UNABLE_TO_READ_FILE |
Unable to read from file. |
| RET_FILEDATA_INCONSISTENT |
File contains inconsistent data. (130) |
| RET_OPTIONS_ADJUSTED |
Options needed to be adjusted for consistency reasons. |
| RET_UNABLE_TO_ANALYSE_QPROBLEM |
Unable to analyse (S)QProblem(B) object. |
| RET_NWSR_SET_TO_ONE |
Maximum number of working set changes was set to 1. |
| RET_UNABLE_TO_READ_BENCHMARK |
Unable to read benchmark data. |
| RET_BENCHMARK_ABORTED |
Benchmark aborted. |
| RET_INITIAL_QP_SOLVED |
Initial QP solved. |
| RET_QP_SOLUTION_STARTED |
Solving QP... |
| RET_BENCHMARK_SUCCESSFUL |
Benchmark terminated successfully. |
| RET_NO_DIAGONAL_AVAILABLE |
Sparse matrix does not have entries on full diagonal. |
| RET_DIAGONAL_NOT_INITIALISED |
Diagonal data of sparse matrix has not been initialised. (140) |
| RET_ENSURELI_DROPPED |
Linear independence resolved by dropping blocking constraint. |
| RET_KKT_MATRIX_SINGULAR |
KKT matrix is singular. |
| RET_QR_FACTORISATION_FAILED |
QR factorization of Schur complement failed. |
| RET_INERTIA_CORRECTION_FAILED |
Inertia correction failed after KKT matrix had too many negative eigenvalues. |
| RET_NO_SPARSE_SOLVER |
No factorization routine for the KKT matrix installed. |
| RET_SIMPLE_STATUS_P1 |
QP problem could not be solved within given number of iterations. |
| RET_SIMPLE_STATUS_P0 |
QP problem solved. |
| RET_SIMPLE_STATUS_M1 |
QP problem could not be solved due to an internal error. |
| RET_SIMPLE_STATUS_M2 |
QP problem is infeasible (and thus could not be solved). |
| RET_SIMPLE_STATUS_M3 |
QP problem is unbounded (and thus could not be solved). (150) |
| TERMINAL_LIST_ELEMENT |
Terminal list element, internal usage only! |
| SUCCESSFUL_RETURN |
Successful return. |
| RET_DIV_BY_ZERO |
Division by zero. |
| RET_INDEX_OUT_OF_BOUNDS |
Index out of bounds. |
| RET_INVALID_ARGUMENTS |
At least one of the arguments is invalid. |
| RET_ERROR_UNDEFINED |
Error number undefined. |
| RET_WARNING_UNDEFINED |
Warning number undefined. |
| RET_INFO_UNDEFINED |
Info number undefined. |
| RET_EWI_UNDEFINED |
Error/warning/info number undefined. |
| RET_AVAILABLE_WITH_LINUX_ONLY |
This function is available under Linux only. |
| RET_UNKNOWN_BUG |
The error occurred is not yet known. |
| RET_PRINTLEVEL_CHANGED |
Print level changed. (10) |
| RET_NOT_YET_IMPLEMENTED |
Requested function is not yet implemented in this version of qpOASES. |
| RET_INDEXLIST_MUST_BE_REORDERD |
Index list has to be reordered. |
| RET_INDEXLIST_EXCEEDS_MAX_LENGTH |
Index list exceeds its maximal physical length. |
| RET_INDEXLIST_CORRUPTED |
Index list corrupted. |
| RET_INDEXLIST_OUTOFBOUNDS |
Physical index is out of bounds. |
| RET_INDEXLIST_ADD_FAILED |
Adding indices from another index set failed. |
| RET_INDEXLIST_INTERSECT_FAILED |
Intersection with another index set failed. |
| RET_INDEX_ALREADY_OF_DESIRED_STATUS |
Index is already of desired status. (18) |
| RET_ADDINDEX_FAILED |
Adding index to index set failed. |
| RET_REMOVEINDEX_FAILED |
Removing index from index set failed. (20) |
| RET_SWAPINDEX_FAILED |
Cannot swap between different indexsets. |
| RET_NOTHING_TO_DO |
Nothing to do. |
| RET_SETUP_BOUND_FAILED |
Setting up bound index failed. |
| RET_SETUP_CONSTRAINT_FAILED |
Setting up constraint index failed. |
| RET_MOVING_BOUND_FAILED |
Moving bound between index sets failed. |
| RET_MOVING_CONSTRAINT_FAILED |
Moving constraint between index sets failed. |
| RET_SHIFTING_FAILED |
Shifting of bounds/constraints failed. |
| RET_ROTATING_FAILED |
Rotating of bounds/constraints failed. |
| RET_QPOBJECT_NOT_SETUP |
The QP object has not been setup correctly, use another constructor. |
| RET_QP_ALREADY_INITIALISED |
QProblem has already been initialised. (30) |
| RET_NO_INIT_WITH_STANDARD_SOLVER |
Initialisation via extern QP solver is not yet implemented. |
| RET_RESET_FAILED |
Reset failed. |
| RET_INIT_FAILED |
Initialisation failed. |
| RET_INIT_FAILED_TQ |
Initialisation failed due to TQ factorisation. |
| RET_INIT_FAILED_CHOLESKY |
Initialisation failed due to Cholesky decomposition. |
| RET_INIT_FAILED_HOTSTART |
Initialisation failed! QP could not be solved! |
| RET_INIT_FAILED_INFEASIBILITY |
Initial QP could not be solved due to infeasibility! |
| RET_INIT_FAILED_UNBOUNDEDNESS |
Initial QP could not be solved due to unboundedness! |
| RET_INIT_FAILED_REGULARISATION |
Initialisation failed as Hessian matrix could not be regularised. |
| RET_INIT_SUCCESSFUL |
Initialisation done. (40) |
| RET_OBTAINING_WORKINGSET_FAILED |
Failed to obtain working set for auxiliary QP. |
| RET_SETUP_WORKINGSET_FAILED |
Failed to setup working set for auxiliary QP. |
| RET_SETUP_AUXILIARYQP_FAILED |
Failed to setup auxiliary QP for initialised homotopy. |
| RET_NO_CHOLESKY_WITH_INITIAL_GUESS |
Externally computed Cholesky factor cannot be combined with an initial guess. |
| RET_NO_EXTERN_SOLVER |
No extern QP solver available. |
| RET_QP_UNBOUNDED |
QP is unbounded. |
| RET_QP_INFEASIBLE |
QP is infeasible. |
| RET_QP_NOT_SOLVED |
Problems occurred while solving QP with standard solver. |
| RET_QP_SOLVED |
QP successfully solved. |
| RET_UNABLE_TO_SOLVE_QP |
Problems occurred while solving QP. (50) |
| RET_INITIALISATION_STARTED |
Starting problem initialisation... |
| RET_HOTSTART_FAILED |
Unable to perform homotopy due to internal error. |
| RET_HOTSTART_FAILED_TO_INIT |
Unable to initialise problem. |
| RET_HOTSTART_FAILED_AS_QP_NOT_INITIALISED |
Unable to perform homotopy as previous QP is not solved. |
| RET_ITERATION_STARTED |
Iteration... |
| RET_SHIFT_DETERMINATION_FAILED |
Determination of shift of the QP data failed. |
| RET_STEPDIRECTION_DETERMINATION_FAILED |
Determination of step direction failed. |
| RET_STEPLENGTH_DETERMINATION_FAILED |
Determination of step direction failed. |
| RET_OPTIMAL_SOLUTION_FOUND |
Optimal solution of neighbouring QP found. |
| RET_HOMOTOPY_STEP_FAILED |
Unable to perform homotopy step. (60) |
| RET_HOTSTART_STOPPED_INFEASIBILITY |
Premature homotopy termination because QP is infeasible. |
| RET_HOTSTART_STOPPED_UNBOUNDEDNESS |
Premature homotopy termination because QP is unbounded. |
| RET_WORKINGSET_UPDATE_FAILED |
Unable to update working sets according to initial guesses. |
| RET_MAX_NWSR_REACHED |
Maximum number of working set recalculations performed. |
| RET_CONSTRAINTS_NOT_SPECIFIED |
Problem does comprise constraints! You also have to specify new constraints' bounds. |
| RET_INVALID_FACTORISATION_FLAG |
Invalid factorisation flag. |
| RET_UNABLE_TO_SAVE_QPDATA |
Unable to save QP data. |
| RET_STEPDIRECTION_FAILED_TQ |
Abnormal termination due to TQ factorisation. |
| RET_STEPDIRECTION_FAILED_CHOLESKY |
Abnormal termination due to Cholesky factorisation. |
| RET_CYCLING_DETECTED |
Cycling detected. (70) |
| RET_CYCLING_NOT_RESOLVED |
Cycling cannot be resolved, QP probably infeasible. |
| RET_CYCLING_RESOLVED |
Cycling probably resolved. |
| RET_STEPSIZE |
For displaying performed stepsize. |
| RET_STEPSIZE_NONPOSITIVE |
For displaying non-positive stepsize. |
| RET_SETUPSUBJECTTOTYPE_FAILED |
Setup of SubjectToTypes failed. |
| RET_ADDCONSTRAINT_FAILED |
Addition of constraint to working set failed. |
| RET_ADDCONSTRAINT_FAILED_INFEASIBILITY |
Addition of constraint to working set failed (due to QP infeasibility). |
| RET_ADDBOUND_FAILED |
Addition of bound to working set failed. |
| RET_ADDBOUND_FAILED_INFEASIBILITY |
Addition of bound to working set failed (due to QP infeasibility). |
| RET_REMOVECONSTRAINT_FAILED |
Removal of constraint from working set failed. (80) |
| RET_REMOVEBOUND_FAILED |
Removal of bound from working set failed. |
| RET_REMOVE_FROM_ACTIVESET |
Removing from active set... |
| RET_ADD_TO_ACTIVESET |
Adding to active set... |
| RET_REMOVE_FROM_ACTIVESET_FAILED |
Removing from active set failed. |
| RET_ADD_TO_ACTIVESET_FAILED |
Adding to active set failed. |
| RET_CONSTRAINT_ALREADY_ACTIVE |
Constraint is already active. |
| RET_ALL_CONSTRAINTS_ACTIVE |
All constraints are active, no further constraint can be added. |
| RET_LINEARLY_DEPENDENT |
New bound/constraint is linearly dependent. |
| RET_LINEARLY_INDEPENDENT |
New bound/constraint is linearly independent. |
| RET_LI_RESOLVED |
Linear independence of active constraint matrix successfully resolved. (90) |
| RET_ENSURELI_FAILED |
Failed to ensure linear independence of active constraint matrix. |
| RET_ENSURELI_FAILED_TQ |
Abnormal termination due to TQ factorisation. |
| RET_ENSURELI_FAILED_NOINDEX |
QP is infeasible. |
| RET_ENSURELI_FAILED_CYCLING |
QP is infeasible. |
| RET_BOUND_ALREADY_ACTIVE |
Bound is already active. |
| RET_ALL_BOUNDS_ACTIVE |
All bounds are active, no further bound can be added. |
| RET_CONSTRAINT_NOT_ACTIVE |
Constraint is not active. |
| RET_BOUND_NOT_ACTIVE |
Bound is not active. |
| RET_HESSIAN_NOT_SPD |
Projected Hessian matrix not positive definite. |
| RET_HESSIAN_INDEFINITE |
Hessian matrix is indefinite. (100) |
| RET_MATRIX_SHIFT_FAILED |
Unable to update matrices or to transform vectors. |
| RET_MATRIX_FACTORISATION_FAILED |
Unable to calculate new matrix factorisations. |
| RET_PRINT_ITERATION_FAILED |
Unable to print information on current iteration. |
| RET_NO_GLOBAL_MESSAGE_OUTPUTFILE |
No global message output file initialised. |
| RET_DISABLECONSTRAINTS_FAILED |
Unable to disbable constraints. |
| RET_ENABLECONSTRAINTS_FAILED |
Unable to enbable constraints. |
| RET_ALREADY_ENABLED |
Bound or constraint is already enabled. |
| RET_ALREADY_DISABLED |
Bound or constraint is already disabled. |
| RET_NO_HESSIAN_SPECIFIED |
No Hessian matrix has been specified. |
| RET_USING_REGULARISATION |
Using regularisation as Hessian matrix is not positive definite. (110) |
| RET_EPS_MUST_BE_POSITVE |
Eps for regularisation must be sufficiently positive. |
| RET_REGSTEPS_MUST_BE_POSITVE |
Maximum number of regularisation steps must be non-negative. |
| RET_HESSIAN_ALREADY_REGULARISED |
Hessian has been already regularised. |
| RET_CANNOT_REGULARISE_IDENTITY |
Identity Hessian matrix cannot be regularised. |
| RET_CANNOT_REGULARISE_SPARSE |
Sparse matrix cannot be regularised as diagonal entry is missing. |
| RET_NO_REGSTEP_NWSR |
No additional regularisation step could be performed due to limits. |
| RET_FEWER_REGSTEPS_NWSR |
Fewer additional regularisation steps have been performed due to limits. |
| RET_CHOLESKY_OF_ZERO_HESSIAN |
Cholesky decomposition of (unregularised) zero Hessian matrix. |
| RET_ZERO_HESSIAN_ASSUMED |
Zero Hessian matrix assumed as null pointer passed without specifying hessianType. |
| RET_CONSTRAINTS_ARE_NOT_SCALED |
(no longer in use) (120) |
| RET_INITIAL_BOUNDS_STATUS_NYI |
(no longer in use) |
| RET_ERROR_IN_CONSTRAINTPRODUCT |
Error in user-defined constraint product function. |
| RET_FIX_BOUNDS_FOR_LP |
All initial bounds must be fixed when solving an (unregularised) LP. |
| RET_USE_REGULARISATION_FOR_LP |
Set options.enableRegularisation=BT_TRUE for solving LPs. |
| RET_UPDATEMATRICES_FAILED |
Unable to update QP matrices. |
| RET_UPDATEMATRICES_FAILED_AS_QP_NOT_SOLVED |
Unable to update matrices as previous QP is not solved. |
| RET_UNABLE_TO_OPEN_FILE |
Unable to open file. |
| RET_UNABLE_TO_WRITE_FILE |
Unable to write into file. |
| RET_UNABLE_TO_READ_FILE |
Unable to read from file. |
| RET_FILEDATA_INCONSISTENT |
File contains inconsistent data. (130) |
| RET_OPTIONS_ADJUSTED |
Options needed to be adjusted for consistency reasons. |
| RET_UNABLE_TO_ANALYSE_QPROBLEM |
Unable to analyse (S)QProblem(B) object. |
| RET_NWSR_SET_TO_ONE |
Maximum number of working set changes was set to 1. |
| RET_UNABLE_TO_READ_BENCHMARK |
Unable to read benchmark data. |
| RET_BENCHMARK_ABORTED |
Benchmark aborted. |
| RET_INITIAL_QP_SOLVED |
Initial QP solved. |
| RET_QP_SOLUTION_STARTED |
Solving QP... |
| RET_BENCHMARK_SUCCESSFUL |
Benchmark terminated successfully. |
| RET_NO_DIAGONAL_AVAILABLE |
Sparse matrix does not have entries on full diagonal. |
| RET_DIAGONAL_NOT_INITIALISED |
Diagonal data of sparse matrix has not been initialised. (140) |
| RET_ENSURELI_DROPPED |
Linear independence resolved by dropping blocking constraint. |
| RET_SIMPLE_STATUS_P1 |
QP problem could not be solved within given number of iterations. |
| RET_SIMPLE_STATUS_P0 |
QP problem solved. |
| RET_SIMPLE_STATUS_M1 |
QP problem could not be solved due to an internal error. |
| RET_SIMPLE_STATUS_M2 |
QP problem is infeasible (and thus could not be solved). |
| RET_SIMPLE_STATUS_M3 |
QP problem is unbounded (and thus could not be solved). (146) |
Definition at line 64 of file external_packages/qpoases/INCLUDE/MessageHandling.hpp.
Function Documentation
| MessageHandling* getGlobalMessageHandler | ( | ) |
Returns a pointer to global message handler.
- Returns
- Pointer to global message handler.
Global message handler for all qpOASES modules.
Definition at line 515 of file examples/code_generation/mpc_mhe/getting_started_export/qpoases/SRC/MessageHandling.cpp.