jdcolor.c
Go to the documentation of this file.
00001 /*
00002  * jdcolor.c
00003  *
00004  * Copyright (C) 1991-1997, Thomas G. Lane.
00005  * This file is part of the Independent JPEG Group's software.
00006  * For conditions of distribution and use, see the accompanying README file.
00007  *
00008  * This file contains output colorspace conversion routines.
00009  */
00010 
00011 #define JPEG_INTERNALS
00012 #include "jinclude.h"
00013 #include "jpeglib.h"
00014 
00015 
00016 /* Private subobject */
00017 
00018 typedef struct {
00019   struct jpeg_color_deconverter pub; /* public fields */
00020 
00021   /* Private state for YCC->RGB conversion */
00022   int * Cr_r_tab;               /* => table for Cr to R conversion */
00023   int * Cb_b_tab;               /* => table for Cb to B conversion */
00024   INT32 * Cr_g_tab;             /* => table for Cr to G conversion */
00025   INT32 * Cb_g_tab;             /* => table for Cb to G conversion */
00026 } my_color_deconverter;
00027 
00028 typedef my_color_deconverter * my_cconvert_ptr;
00029 
00030 
00031 /**************** YCbCr -> RGB conversion: most common case **************/
00032 
00033 /*
00034  * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
00035  * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
00036  * The conversion equations to be implemented are therefore
00037  *      R = Y                + 1.40200 * Cr
00038  *      G = Y - 0.34414 * Cb - 0.71414 * Cr
00039  *      B = Y + 1.77200 * Cb
00040  * where Cb and Cr represent the incoming values less CENTERJSAMPLE.
00041  * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
00042  *
00043  * To avoid floating-point arithmetic, we represent the fractional constants
00044  * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
00045  * the products by 2^16, with appropriate rounding, to get the correct answer.
00046  * Notice that Y, being an integral input, does not contribute any fraction
00047  * so it need not participate in the rounding.
00048  *
00049  * For even more speed, we avoid doing any multiplications in the inner loop
00050  * by precalculating the constants times Cb and Cr for all possible values.
00051  * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
00052  * for 12-bit samples it is still acceptable.  It's not very reasonable for
00053  * 16-bit samples, but if you want lossless storage you shouldn't be changing
00054  * colorspace anyway.
00055  * The Cr=>R and Cb=>B values can be rounded to integers in advance; the
00056  * values for the G calculation are left scaled up, since we must add them
00057  * together before rounding.
00058  */
00059 
00060 #define SCALEBITS       16      /* speediest right-shift on some machines */
00061 #define ONE_HALF        ((INT32) 1 << (SCALEBITS-1))
00062 #define FIX(x)          ((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
00063 
00064 
00065 /*
00066  * Initialize tables for YCC->RGB colorspace conversion.
00067  */
00068 
00069 LOCAL(void)
00070 build_ycc_rgb_table (j_decompress_ptr cinfo)
00071 {
00072   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
00073   int i;
00074   INT32 x;
00075   SHIFT_TEMPS
00076 
00077   cconvert->Cr_r_tab = (int *)
00078     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
00079                                 (MAXJSAMPLE+1) * SIZEOF(int));
00080   cconvert->Cb_b_tab = (int *)
00081     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
00082                                 (MAXJSAMPLE+1) * SIZEOF(int));
00083   cconvert->Cr_g_tab = (INT32 *)
00084     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
00085                                 (MAXJSAMPLE+1) * SIZEOF(INT32));
00086   cconvert->Cb_g_tab = (INT32 *)
00087     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
00088                                 (MAXJSAMPLE+1) * SIZEOF(INT32));
00089 
00090   for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
00091     /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
00092     /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
00093     /* Cr=>R value is nearest int to 1.40200 * x */
00094     cconvert->Cr_r_tab[i] = (int)
00095                     RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
00096     /* Cb=>B value is nearest int to 1.77200 * x */
00097     cconvert->Cb_b_tab[i] = (int)
00098                     RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
00099     /* Cr=>G value is scaled-up -0.71414 * x */
00100     cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x;
00101     /* Cb=>G value is scaled-up -0.34414 * x */
00102     /* We also add in ONE_HALF so that need not do it in inner loop */
00103     cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
00104   }
00105 }
00106 
00107 
00108 /*
00109  * Convert some rows of samples to the output colorspace.
00110  *
00111  * Note that we change from noninterleaved, one-plane-per-component format
00112  * to interleaved-pixel format.  The output buffer is therefore three times
00113  * as wide as the input buffer.
00114  * A starting row offset is provided only for the input buffer.  The caller
00115  * can easily adjust the passed output_buf value to accommodate any row
00116  * offset required on that side.
00117  */
00118 
00119 METHODDEF(void)
00120 ycc_rgb_convert (j_decompress_ptr cinfo,
00121                  JSAMPIMAGE input_buf, JDIMENSION input_row,
00122                  JSAMPARRAY output_buf, int num_rows)
00123 {
00124   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
00125   register int y, cb, cr;
00126   register JSAMPROW outptr;
00127   register JSAMPROW inptr0, inptr1, inptr2;
00128   register JDIMENSION col;
00129   JDIMENSION num_cols = cinfo->output_width;
00130   /* copy these pointers into registers if possible */
00131   register JSAMPLE * range_limit = cinfo->sample_range_limit;
00132   register int * Crrtab = cconvert->Cr_r_tab;
00133   register int * Cbbtab = cconvert->Cb_b_tab;
00134   register INT32 * Crgtab = cconvert->Cr_g_tab;
00135   register INT32 * Cbgtab = cconvert->Cb_g_tab;
00136   SHIFT_TEMPS
00137 
00138   while (--num_rows >= 0) {
00139     inptr0 = input_buf[0][input_row];
00140     inptr1 = input_buf[1][input_row];
00141     inptr2 = input_buf[2][input_row];
00142     input_row++;
00143     outptr = *output_buf++;
00144     for (col = 0; col < num_cols; col++) {
00145       y  = GETJSAMPLE(inptr0[col]);
00146       cb = GETJSAMPLE(inptr1[col]);
00147       cr = GETJSAMPLE(inptr2[col]);
00148       /* Range-limiting is essential due to noise introduced by DCT losses. */
00149       outptr[RGB_RED] =   range_limit[y + Crrtab[cr]];
00150       outptr[RGB_GREEN] = range_limit[y +
00151                               ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
00152                                                  SCALEBITS))];
00153       outptr[RGB_BLUE] =  range_limit[y + Cbbtab[cb]];
00154       outptr += RGB_PIXELSIZE;
00155     }
00156   }
00157 }
00158 
00159 
00160 /**************** Cases other than YCbCr -> RGB **************/
00161 
00162 
00163 /*
00164  * Color conversion for no colorspace change: just copy the data,
00165  * converting from separate-planes to interleaved representation.
00166  */
00167 
00168 METHODDEF(void)
00169 null_convert (j_decompress_ptr cinfo,
00170               JSAMPIMAGE input_buf, JDIMENSION input_row,
00171               JSAMPARRAY output_buf, int num_rows)
00172 {
00173   register JSAMPROW inptr, outptr;
00174   register JDIMENSION count;
00175   register int num_components = cinfo->num_components;
00176   JDIMENSION num_cols = cinfo->output_width;
00177   int ci;
00178 
00179   while (--num_rows >= 0) {
00180     for (ci = 0; ci < num_components; ci++) {
00181       inptr = input_buf[ci][input_row];
00182       outptr = output_buf[0] + ci;
00183       for (count = num_cols; count > 0; count--) {
00184         *outptr = *inptr++;     /* needn't bother with GETJSAMPLE() here */
00185         outptr += num_components;
00186       }
00187     }
00188     input_row++;
00189     output_buf++;
00190   }
00191 }
00192 
00193 
00194 /*
00195  * Color conversion for grayscale: just copy the data.
00196  * This also works for YCbCr -> grayscale conversion, in which
00197  * we just copy the Y (luminance) component and ignore chrominance.
00198  */
00199 
00200 METHODDEF(void)
00201 grayscale_convert (j_decompress_ptr cinfo,
00202                    JSAMPIMAGE input_buf, JDIMENSION input_row,
00203                    JSAMPARRAY output_buf, int num_rows)
00204 {
00205   jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0,
00206                     num_rows, cinfo->output_width);
00207 }
00208 
00209 
00210 /*
00211  * Convert grayscale to RGB: just duplicate the graylevel three times.
00212  * This is provided to support applications that don't want to cope
00213  * with grayscale as a separate case.
00214  */
00215 
00216 METHODDEF(void)
00217 gray_rgb_convert (j_decompress_ptr cinfo,
00218                   JSAMPIMAGE input_buf, JDIMENSION input_row,
00219                   JSAMPARRAY output_buf, int num_rows)
00220 {
00221   register JSAMPROW inptr, outptr;
00222   register JDIMENSION col;
00223   JDIMENSION num_cols = cinfo->output_width;
00224 
00225   while (--num_rows >= 0) {
00226     inptr = input_buf[0][input_row++];
00227     outptr = *output_buf++;
00228     for (col = 0; col < num_cols; col++) {
00229       /* We can dispense with GETJSAMPLE() here */
00230       outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col];
00231       outptr += RGB_PIXELSIZE;
00232     }
00233   }
00234 }
00235 
00236 
00237 /*
00238  * Adobe-style YCCK->CMYK conversion.
00239  * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same
00240  * conversion as above, while passing K (black) unchanged.
00241  * We assume build_ycc_rgb_table has been called.
00242  */
00243 
00244 METHODDEF(void)
00245 ycck_cmyk_convert (j_decompress_ptr cinfo,
00246                    JSAMPIMAGE input_buf, JDIMENSION input_row,
00247                    JSAMPARRAY output_buf, int num_rows)
00248 {
00249   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
00250   register int y, cb, cr;
00251   register JSAMPROW outptr;
00252   register JSAMPROW inptr0, inptr1, inptr2, inptr3;
00253   register JDIMENSION col;
00254   JDIMENSION num_cols = cinfo->output_width;
00255   /* copy these pointers into registers if possible */
00256   register JSAMPLE * range_limit = cinfo->sample_range_limit;
00257   register int * Crrtab = cconvert->Cr_r_tab;
00258   register int * Cbbtab = cconvert->Cb_b_tab;
00259   register INT32 * Crgtab = cconvert->Cr_g_tab;
00260   register INT32 * Cbgtab = cconvert->Cb_g_tab;
00261   SHIFT_TEMPS
00262 
00263   while (--num_rows >= 0) {
00264     inptr0 = input_buf[0][input_row];
00265     inptr1 = input_buf[1][input_row];
00266     inptr2 = input_buf[2][input_row];
00267     inptr3 = input_buf[3][input_row];
00268     input_row++;
00269     outptr = *output_buf++;
00270     for (col = 0; col < num_cols; col++) {
00271       y  = GETJSAMPLE(inptr0[col]);
00272       cb = GETJSAMPLE(inptr1[col]);
00273       cr = GETJSAMPLE(inptr2[col]);
00274       /* Range-limiting is essential due to noise introduced by DCT losses. */
00275       outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])];   /* red */
00276       outptr[1] = range_limit[MAXJSAMPLE - (y +                 /* green */
00277                               ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
00278                                                  SCALEBITS)))];
00279       outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])];   /* blue */
00280       /* K passes through unchanged */
00281       outptr[3] = inptr3[col];  /* don't need GETJSAMPLE here */
00282       outptr += 4;
00283     }
00284   }
00285 }
00286 
00287 
00288 /*
00289  * Empty method for start_pass.
00290  */
00291 
00292 METHODDEF(void)
00293 start_pass_dcolor (j_decompress_ptr cinfo)
00294 {
00295   /* no work needed */
00296 }
00297 
00298 
00299 /*
00300  * Module initialization routine for output colorspace conversion.
00301  */
00302 
00303 GLOBAL(void)
00304 jinit_color_deconverter (j_decompress_ptr cinfo)
00305 {
00306   my_cconvert_ptr cconvert;
00307   int ci;
00308 
00309   cconvert = (my_cconvert_ptr)
00310     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
00311                                 SIZEOF(my_color_deconverter));
00312   cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert;
00313   cconvert->pub.start_pass = start_pass_dcolor;
00314 
00315   /* Make sure num_components agrees with jpeg_color_space */
00316   switch (cinfo->jpeg_color_space) {
00317   case JCS_GRAYSCALE:
00318     if (cinfo->num_components != 1)
00319       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
00320     break;
00321 
00322   case JCS_RGB:
00323   case JCS_YCbCr:
00324     if (cinfo->num_components != 3)
00325       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
00326     break;
00327 
00328   case JCS_CMYK:
00329   case JCS_YCCK:
00330     if (cinfo->num_components != 4)
00331       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
00332     break;
00333 
00334   default:                      /* JCS_UNKNOWN can be anything */
00335     if (cinfo->num_components < 1)
00336       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
00337     break;
00338   }
00339 
00340   /* Set out_color_components and conversion method based on requested space.
00341    * Also clear the component_needed flags for any unused components,
00342    * so that earlier pipeline stages can avoid useless computation.
00343    */
00344 
00345   switch (cinfo->out_color_space) {
00346   case JCS_GRAYSCALE:
00347     cinfo->out_color_components = 1;
00348     if (cinfo->jpeg_color_space == JCS_GRAYSCALE ||
00349         cinfo->jpeg_color_space == JCS_YCbCr) {
00350       cconvert->pub.color_convert = grayscale_convert;
00351       /* For color->grayscale conversion, only the Y (0) component is needed */
00352       for (ci = 1; ci < cinfo->num_components; ci++)
00353         cinfo->comp_info[ci].component_needed = FALSE;
00354     } else
00355       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
00356     break;
00357 
00358   case JCS_RGB:
00359     cinfo->out_color_components = RGB_PIXELSIZE;
00360     if (cinfo->jpeg_color_space == JCS_YCbCr) {
00361       cconvert->pub.color_convert = ycc_rgb_convert;
00362       build_ycc_rgb_table(cinfo);
00363     } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
00364       cconvert->pub.color_convert = gray_rgb_convert;
00365     } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) {
00366       cconvert->pub.color_convert = null_convert;
00367     } else
00368       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
00369     break;
00370 
00371   case JCS_CMYK:
00372     cinfo->out_color_components = 4;
00373     if (cinfo->jpeg_color_space == JCS_YCCK) {
00374       cconvert->pub.color_convert = ycck_cmyk_convert;
00375       build_ycc_rgb_table(cinfo);
00376     } else if (cinfo->jpeg_color_space == JCS_CMYK) {
00377       cconvert->pub.color_convert = null_convert;
00378     } else
00379       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
00380     break;
00381 
00382   default:
00383     /* Permit null conversion to same output space */
00384     if (cinfo->out_color_space == cinfo->jpeg_color_space) {
00385       cinfo->out_color_components = cinfo->num_components;
00386       cconvert->pub.color_convert = null_convert;
00387     } else                      /* unsupported non-null conversion */
00388       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
00389     break;
00390   }
00391 
00392   if (cinfo->quantize_colors)
00393     cinfo->output_components = 1; /* single colormapped output component */
00394   else
00395     cinfo->output_components = cinfo->out_color_components;
00396 }


openhrp3
Author(s): AIST, General Robotix Inc., Nakamura Lab of Dept. of Mechano Informatics at University of Tokyo
autogenerated on Sun Apr 2 2017 03:43:55