demo.cpp
Go to the documentation of this file.
00001 /*********************************************************************
00002  * Software License Agreement (BSD License)
00003  *
00004  *  Copyright (c) 2012, Willow Garage, Inc.
00005  *  All rights reserved.
00006  *
00007  *  Redistribution and use in source and binary forms, with or without
00008  *  modification, are permitted provided that the following conditions
00009  *  are met:
00010  *
00011  *   * Redistributions of source code must retain the above copyright
00012  *     notice, this list of conditions and the following disclaimer.
00013  *   * Redistributions in binary form must reproduce the above
00014  *     copyright notice, this list of conditions and the following
00015  *     disclaimer in the documentation and/or other materials provided
00016  *     with the distribution.
00017  *   * Neither the name of Willow Garage nor the names of its
00018  *     contributors may be used to endorse or promote products derived
00019  *     from this software without specific prior written permission.
00020  *
00021  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
00022  *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
00023  *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
00024  *  FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
00025  *  COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
00026  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
00027  *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
00028  *  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
00029  *  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
00030  *  LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
00031  *  ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
00032  *  POSSIBILITY OF SUCH DAMAGE.
00033  *********************************************************************/
00034 
00035 /* Author: Ioan Sucan */
00036 
00037 #include <moveit/move_group_interface/move_group.h>
00038 #include <ros/ros.h>
00039 
00040 void demoPick(moveit::planning_interface::MoveGroup &group)
00041 {
00042   std::vector<moveit_msgs::Grasp> grasps;
00043   for (std::size_t i = 0 ; i < 20 ; ++i)
00044   {
00045     geometry_msgs::PoseStamped p = group.getRandomPose();
00046     p.pose.orientation.x = 0;
00047     p.pose.orientation.y = 0;
00048     p.pose.orientation.z = 0;
00049     p.pose.orientation.w = 1;
00050     moveit_msgs::Grasp g;
00051     g.grasp_pose = p;
00052     g.pre_grasp_approach.direction.vector.x = 1.0;
00053     g.post_grasp_retreat.direction.vector.z = 1.0;
00054     g.post_grasp_retreat.direction.header = p.header;
00055     g.pre_grasp_approach.min_distance = 0.2;
00056     g.pre_grasp_approach.desired_distance = 0.4;
00057     g.post_grasp_retreat.min_distance = 0.1;
00058     g.post_grasp_retreat.desired_distance = 0.27;
00059     g.pre_grasp_posture.joint_names.resize(1, "r_gripper_joint");
00060     g.pre_grasp_posture.points.resize(1);
00061     g.pre_grasp_posture.points[0].positions.resize(1);
00062     g.pre_grasp_posture.points[0].positions[0] = 1;
00063 
00064     g.grasp_posture.joint_names.resize(1, "r_gripper_joint");
00065     g.grasp_posture.points.resize(1);
00066     g.grasp_posture.points[0].positions.resize(1);
00067     g.grasp_posture.points[0].positions[0] = 0;
00068 
00069     grasps.push_back(g);
00070   }
00071   group.pick("bubu", grasps);
00072 }
00073 
00074 void demoPlace(moveit::planning_interface::MoveGroup &group)
00075 {
00076   std::vector<moveit_msgs::PlaceLocation> loc;
00077   for (std::size_t i = 0 ; i < 20 ; ++i)
00078   {
00079     geometry_msgs::PoseStamped p = group.getRandomPose();
00080     p.pose.orientation.x = 0;
00081     p.pose.orientation.y = 0;
00082     p.pose.orientation.z = 0;
00083     p.pose.orientation.w = 1;
00084     moveit_msgs::PlaceLocation g;
00085     g.place_pose = p;
00086     g.pre_place_approach.direction.vector.x = 1.0;
00087     g.post_place_retreat.direction.vector.z = 1.0;
00088     g.post_place_retreat.direction.header = p.header;
00089     g.pre_place_approach.min_distance = 0.2;
00090     g.pre_place_approach.desired_distance = 0.4;
00091     g.post_place_retreat.min_distance = 0.1;
00092     g.post_place_retreat.desired_distance = 0.27;
00093 
00094     g.post_place_posture.joint_names.resize(1, "r_gripper_joint");
00095     g.post_place_posture.points.resize(1);
00096     g.post_place_posture.points[0].positions.resize(1);
00097     g.post_place_posture.points[0].positions[0] = 0;
00098 
00099     loc.push_back(g);
00100   }
00101   group.place("bubu", loc);
00102 }
00103 
00104 void attachObject(void)
00105 {
00106 
00107 }
00108 
00109 int main(int argc, char **argv)
00110 {
00111   ros::init(argc, argv, "move_group_interface_demo", ros::init_options::AnonymousName);
00112 
00113   ros::AsyncSpinner spinner(1);
00114   spinner.start();
00115 
00116   moveit::planning_interface::MoveGroup group(argc > 1 ? argv[1] : "right_arm");
00117   demoPlace(group);
00118 
00119   sleep(2);
00120 
00121   return 0;
00122 }


planning_interface
Author(s): Ioan Sucan
autogenerated on Wed Aug 26 2015 12:44:13