Public Attributes
eap_peer_config Struct Reference

#include <eap_config.h>

List of all members.

Public Attributes

u8 * altsubject_match
u8 * altsubject_match2
u8 * anonymous_identity
size_t anonymous_identity_len
u8 * ca_cert
u8 * ca_cert2
char * ca_cert2_id
char * ca_cert_id
u8 * ca_path
u8 * ca_path2
char * cert2_id
char * cert_id
u8 * client_cert
u8 * client_cert2
u8 * dh_file
u8 * dh_file2
struct eap_method_typeeap_methods
int engine
int engine2
char * engine2_id
char * engine_id
u32 flags
int fragment_size
u8 * identity
size_t identity_len
char * key2_id
char * key_id
int mschapv2_retry
u8 * new_password
size_t new_password_len
u8 * otp
size_t otp_len
char * pac_file
u8 * password
size_t password_len
char * pcsc
int pending_req_identity
int pending_req_new_password
char * pending_req_otp
size_t pending_req_otp_len
int pending_req_passphrase
int pending_req_password
int pending_req_pin
char * phase1
char * phase2
char * pin
char * pin2
u8 * private_key
u8 * private_key2
u8 * private_key2_passwd
u8 * private_key_passwd
u8 * subject_match
u8 * subject_match2

Detailed Description

struct eap_peer_config - EAP peer configuration/credentials

Definition at line 21 of file eap_config.h.


Member Data Documentation

altsubject_match - Constraint for server certificate alt. subject

Semicolon separated string of entries to be matched against the alternative subject name of the authentication server certificate. If this string is set, the server sertificate is only accepted if it contains one of the entries in an alternative subject name extension.

altSubjectName string is in following format: TYPE:VALUE

Example: EMAIL:server@example.com Example: DNS:server.example.com;DNS:server2.example.com

Following types are supported: EMAIL, DNS, URI

Definition at line 211 of file eap_config.h.

altsubject_match2 - Constraint for server certificate alt. subject

This field is like altsubject_match, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication.

Definition at line 306 of file eap_config.h.

anonymous_identity - Anonymous EAP Identity

This field is used for unencrypted use with EAP types that support different tunnelled identity, e.g., EAP-TTLS, in order to reveal the real identity (identity field) only to the authentication server.

If not set, the identity field will be used for both unencrypted and protected fields.

Definition at line 45 of file eap_config.h.

anonymous_identity_len - Length of anonymous_identity

Definition at line 50 of file eap_config.h.

ca_cert - File path to CA certificate file (PEM/DER)

This file can have one or more trusted CA certificates. If ca_cert and ca_path are not included, server certificate will not be verified. This is insecure and a trusted CA certificate should always be configured when using EAP-TLS/TTLS/PEAP. Full path to the file should be used since working directory may change when wpa_supplicant is run in the background.

Alternatively, a named configuration blob can be used by setting this to blob://blob_name.

Alternatively, this can be used to only perform matching of the server certificate (SHA-256 hash of the DER encoded X.509 certificate). In this case, the possible CA certificates in the server certificate chain are ignored and only the server certificate is verified. This is configured with the following format: hash:://server/sha256/cert_hash_in_hex For example: "hash://server/sha256/ 5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a"

On Windows, trusted CA certificates can be loaded from the system certificate store by setting this to cert_store://name, e.g., ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". Note that when running wpa_supplicant as an application, the user certificate store (My user account) is used, whereas computer store (Computer account) is used when running wpasvc as a service.

Definition at line 104 of file eap_config.h.

ca_cert2 - File path to CA certificate file (PEM/DER) (Phase 2)

This file can have one or more trusted CA certificates. If ca_cert2 and ca_path2 are not included, server certificate will not be verified. This is insecure and a trusted CA certificate should always be configured. Full path to the file should be used since working directory may change when wpa_supplicant is run in the background.

This field is like ca_cert, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication.

Alternatively, a named configuration blob can be used by setting this to blob://blob_name.

Definition at line 229 of file eap_config.h.

ca_cert2_id - CA Cert ID for OpenSSL engine (phase2)

This is used if the CA certificate for EAP-TLS is on a smartcard.

Definition at line 508 of file eap_config.h.

ca_cert_id - CA Cert ID for OpenSSL engine

This is used if the CA certificate for EAP-TLS is on a smartcard.

Definition at line 485 of file eap_config.h.

ca_path - Directory path for CA certificate files (PEM)

This path may contain multiple CA certificates in OpenSSL format. Common use for this is to point to system trusted CA list which is often installed into directory like /etc/ssl/certs. If configured, these certificates are added to the list of trusted CAs. ca_cert may also be included in that case, but it is not required.

Definition at line 115 of file eap_config.h.

ca_path2 - Directory path for CA certificate files (PEM) (Phase 2)

This path may contain multiple CA certificates in OpenSSL format. Common use for this is to point to system trusted CA list which is often installed into directory like /etc/ssl/certs. If configured, these certificates are added to the list of trusted CAs. ca_cert may also be included in that case, but it is not required.

This field is like ca_path, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication.

Definition at line 243 of file eap_config.h.

cert2_id - Cert ID for OpenSSL engine (phase2)

This is used if the certificate operations for EAP-TLS are performed using a smartcard.

Definition at line 501 of file eap_config.h.

cert_id - Cert ID for OpenSSL engine

This is used if the certificate operations for EAP-TLS are performed using a smartcard.

Definition at line 478 of file eap_config.h.

client_cert - File path to client certificate file (PEM/DER)

This field is used with EAP method that use TLS authentication. Usually, this is only configured for EAP-TLS, even though this could in theory be used with EAP-TTLS and EAP-PEAP, too. Full path to the file should be used since working directory may change when wpa_supplicant is run in the background.

Alternatively, a named configuration blob can be used by setting this to blob://blob_name.

Definition at line 129 of file eap_config.h.

client_cert2 - File path to client certificate file

This field is like client_cert, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication. Full path to the file should be used since working directory may change when wpa_supplicant is run in the background.

Alternatively, a named configuration blob can be used by setting this to blob://blob_name.

Definition at line 256 of file eap_config.h.

dh_file - File path to DH/DSA parameters file (in PEM format)

This is an optional configuration file for setting parameters for an ephemeral DH key exchange. In most cases, the default RSA authentication does not use this configuration. However, it is possible setup RSA to use ephemeral DH key exchange. In addition, ciphers with DSA keys always use ephemeral DH keys. This can be used to achieve forward secrecy. If the file is in DSA parameters format, it will be automatically converted into DH params. Full path to the file should be used since working directory may change when wpa_supplicant is run in the background.

Alternatively, a named configuration blob can be used by setting this to blob://blob_name.

Definition at line 181 of file eap_config.h.

dh_file2 - File path to DH/DSA parameters file (in PEM format)

This field is like dh_file, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication. Full path to the file should be used since working directory may change when wpa_supplicant is run in the background.

Alternatively, a named configuration blob can be used by setting this to blob://blob_name.

Definition at line 290 of file eap_config.h.

eap_methods - Allowed EAP methods

(vendor=EAP_VENDOR_IETF,method=EAP_TYPE_NONE) terminated list of allowed EAP methods or NULL if all methods are accepted.

Definition at line 314 of file eap_config.h.

engine - Enable OpenSSL engine (e.g., for smartcard access)

This is used if private key operations for EAP-TLS are performed using a smartcard.

Definition at line 410 of file eap_config.h.

engine2 - Enable OpenSSL engine (e.g., for smartcard) (Phase 2)

This is used if private key operations for EAP-TLS are performed using a smartcard.

This field is like engine, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication.

Definition at line 432 of file eap_config.h.

engine2_id - Engine ID for OpenSSL engine (Phase 2)

"opensc" to select OpenSC engine or "pkcs11" to select PKCS#11 engine.

This is used if private key operations for EAP-TLS are performed using a smartcard.

This field is like engine_id, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication.

Definition at line 461 of file eap_config.h.

engine_id - Engine ID for OpenSSL engine

"opensc" to select OpenSC engine or "pkcs11" to select PKCS#11 engine.

This is used if private key operations for EAP-TLS are performed using a smartcard.

Definition at line 421 of file eap_config.h.

flags - Network configuration flags (bitfield)

This variable is used for internal flags to describe further details for the network parameters. bit 0 = password is represented as a 16-byte NtPasswordHash value instead of plaintext password

Definition at line 636 of file eap_config.h.

fragment_size - Maximum EAP fragment size in bytes (default 1398)

This value limits the fragment size for EAP methods that support fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set small enough to make the EAP messages fit in MTU of the network interface used for EAPOL. The default value is suitable for most cases.

Definition at line 625 of file eap_config.h.

identity - EAP Identity

This field is used to set the real user identity or NAI (for EAP-PSK/PAX/SAKE/GPSK).

Definition at line 28 of file eap_config.h.

identity_len - EAP Identity length

Definition at line 33 of file eap_config.h.

key2_id - Key ID for OpenSSL engine (phase2)

This is used if private key operations for EAP-TLS are performed using a smartcard.

Definition at line 493 of file eap_config.h.

key_id - Key ID for OpenSSL engine

This is used if private key operations for EAP-TLS are performed using a smartcard.

Definition at line 470 of file eap_config.h.

mschapv2_retry - MSCHAPv2 retry in progress

This field is used internally by EAP-MSCHAPv2 and should not be set as part of configuration.

Definition at line 600 of file eap_config.h.

new_password - New password for password update

This field is used during MSCHAPv2 password update. This is normally requested from the user through the control interface and not set from configuration.

Definition at line 609 of file eap_config.h.

new_password_len - Length of new_password field

Definition at line 614 of file eap_config.h.

otp - One-time-password

This field should not be set in configuration step. It is only used internally when OTP is entered through the control interface.

Definition at line 516 of file eap_config.h.

otp_len - Length of the otp field

Definition at line 521 of file eap_config.h.

pac_file - File path or blob name for the PAC entries (EAP-FAST)

wpa_supplicant will need to be able to create this file and write updates to it when PAC is being provisioned or refreshed. Full path to the file should be used since working directory may change when wpa_supplicant is run in the background. Alternatively, a named configuration blob can be used by setting this to blob://blob_name.

Definition at line 592 of file eap_config.h.

password - Password string for EAP

This field can include either the plaintext password (default option) or a NtPasswordHash (16-byte MD4 hash of the unicode presentation of the password) if flags field has EAP_CONFIG_FLAGS_PASSWORD_NTHASH bit set to 1. NtPasswordHash can only be used with authentication mechanism that use this hash as the starting point for operation: MSCHAP and MSCHAPv2 (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP).

In addition, this field is used to configure a pre-shared key for EAP-PSK/PAX/SAKE/GPSK. The length of the PSK must be 16 for EAP-PSK and EAP-PAX and 32 for EAP-SAKE. EAP-GPSK can use a variable length PSK.

Definition at line 68 of file eap_config.h.

password_len - Length of password field

Definition at line 73 of file eap_config.h.

pcsc - Parameters for PC/SC smartcard interface for USIM and GSM SIM

This field is used to configure PC/SC smartcard interface. Currently, the only configuration is whether this field is NULL (do not use PC/SC) or non-NULL (e.g., "") to enable PC/SC.

This field is used for EAP-SIM and EAP-AKA.

Definition at line 391 of file eap_config.h.

pending_req_identity - Whether there is a pending identity request

This field should not be set in configuration step. It is only used internally when control interface is used to request needed information.

Definition at line 530 of file eap_config.h.

pending_req_new_password - Pending password update request

This field should not be set in configuration step. It is only used internally when control interface is used to request needed information.

Definition at line 557 of file eap_config.h.

pending_req_otp - Whether there is a pending OTP request

This field should not be set in configuration step. It is only used internally when control interface is used to request needed information.

Definition at line 575 of file eap_config.h.

pending_req_otp_len - Length of the pending OTP request

Definition at line 580 of file eap_config.h.

pending_req_passphrase - Pending passphrase request

This field should not be set in configuration step. It is only used internally when control interface is used to request needed information.

Definition at line 566 of file eap_config.h.

pending_req_password - Whether there is a pending password request

This field should not be set in configuration step. It is only used internally when control interface is used to request needed information.

Definition at line 539 of file eap_config.h.

pending_req_pin - Whether there is a pending PIN request

This field should not be set in configuration step. It is only used internally when control interface is used to request needed information.

Definition at line 548 of file eap_config.h.

phase1 - Phase 1 (outer authentication) parameters

String with field-value pairs, e.g., "peapver=0" or "peapver=1 peaplabel=1".

'peapver' can be used to force which PEAP version (0 or 1) is used.

'peaplabel=1' can be used to force new label, "client PEAP encryption", to be used during key derivation when PEAPv1 or newer.

Most existing PEAPv1 implementation seem to be using the old label, "client EAP encryption", and wpa_supplicant is now using that as the default value.

Some servers, e.g., Radiator, may require peaplabel=1 configuration to interoperate with PEAPv1; see eap_testing.txt for more details.

'peap_outer_success=0' can be used to terminate PEAP authentication on tunneled EAP-Success. This is required with some RADIUS servers that implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode).

include_tls_length=1 can be used to force wpa_supplicant to include TLS Message Length field in all TLS messages even if they are not fragmented.

sim_min_num_chal=3 can be used to configure EAP-SIM to require three challenges (by default, it accepts 2 or 3).

result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use protected result indication.

fast_provisioning option can be used to enable in-line provisioning of EAP-FAST credentials (PAC): 0 = disabled, 1 = allow unauthenticated provisioning, 2 = allow authenticated provisioning, 3 = allow both unauthenticated and authenticated provisioning

fast_max_pac_list_len=num option can be used to set the maximum number of PAC entries to store in a PAC list (default: 10).

fast_pac_format=binary option can be used to select binary format for storing PAC entries in order to save some space (the default text format uses about 2.5 times the size of minimal binary format).

crypto_binding option can be used to control PEAPv0 cryptobinding behavior: 0 = do not use cryptobinding (default) 1 = use cryptobinding if server supports it 2 = require cryptobinding

EAP-WSC (WPS) uses following options: pin=Device_Password and uuid=Device_UUID

Definition at line 372 of file eap_config.h.

phase2 - Phase2 (inner authentication with TLS tunnel) parameters

String with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS.

Definition at line 380 of file eap_config.h.

pin - PIN for USIM, GSM SIM, and smartcards

This field is used to configure PIN for SIM and smartcards for EAP-SIM and EAP-AKA. In addition, this is used with EAP-TLS if a smartcard is used for private key operations.

If left out, this will be asked through control interface.

Definition at line 402 of file eap_config.h.

pin2 - PIN for USIM, GSM SIM, and smartcards (Phase 2)

This field is used to configure PIN for SIM and smartcards for EAP-SIM and EAP-AKA. In addition, this is used with EAP-TLS if a smartcard is used for private key operations.

This field is like pin2, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication.

If left out, this will be asked through control interface.

Definition at line 447 of file eap_config.h.

private_key - File path to client private key file (PEM/DER/PFX)

When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be commented out. Both the private key and certificate will be read from the PKCS#12 file in this case. Full path to the file should be used since working directory may change when wpa_supplicant is run in the background.

Windows certificate store can be used by leaving client_cert out and configuring private_key in one of the following formats:

cert://substring_to_match

hash://certificate_thumbprint_in_hex

For example: private_key="hash://63093aa9c47f56ae88334c7b65a4"

Note that when running wpa_supplicant as an application, the user certificate store (My user account) is used, whereas computer store (Computer account) is used when running wpasvc as a service.

Alternatively, a named configuration blob can be used by setting this to blob://blob_name.

Definition at line 156 of file eap_config.h.

private_key2 - File path to client private key file

This field is like private_key, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication. Full path to the file should be used since working directory may change when wpa_supplicant is run in the background.

Alternatively, a named configuration blob can be used by setting this to blob://blob_name.

Definition at line 269 of file eap_config.h.

private_key2_passwd - Password for private key file

This field is like private_key_passwd, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication.

Definition at line 277 of file eap_config.h.

private_key_passwd - Password for private key file

If left out, this will be asked through control interface.

Definition at line 163 of file eap_config.h.

subject_match - Constraint for server certificate subject

This substring is matched against the subject of the authentication server certificate. If this string is set, the server sertificate is only accepted if it contains this string in the subject. The subject string is in following format:

/C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@n.example.com

Definition at line 193 of file eap_config.h.

subject_match2 - Constraint for server certificate subject

This field is like subject_match, but used for phase 2 (inside EAP-TTLS/PEAP/FAST tunnel) authentication.

Definition at line 298 of file eap_config.h.


The documentation for this struct was generated from the following file:


wpa_supplicant_node
Author(s): Package maintained by Blaise Gassend
autogenerated on Thu Jan 2 2014 11:25:19